We Bought A Garbage Truck For Our Trash Pickup Business (Isuzu NRR w/ Pac-Mac 8 Yard Rear Loader)

[@vegeta420z]

Bummer that the dealer didn't care more about you as a customer and a human. Especially with how much you spent. Truck is awesome though really happy for how fast and steady your growing the business, it's honestly inspiring. Keep at it man, we'll keep watching.

[@DaveM_thetrucker]

@@vegeta420z the dealers just wanted his money and thats it, as he could of walked Way not having signed the paperwork for the truck and getting a knock on the door by the 5 0 and placing him in a set of bracelets and a trip to local PD facing charges of theft of a truck

[@ramblingman8992]

I can't believe how badly dealer's treat their customers in the USA. Maybe it's because you guys don't have the same consumer protection Laws as we do in the UK.

[@DaveM_thetrucker]

@@ramblingman8992 its USA theyre dumb on shit like that, as all they care about is the sales commission n tip

[@DaveM_thetrucker]

@@Planelover67 or the PTO air tanks compressing and decompressing

[@drooplug]

Dealers are the worst. If you were going to spend 10k on jewelry, they would roll out the carpet for you. Spend tens of thousands at a dealer and you are worth garbage to them.

[@GrammarPoliceInvestigations]

I’ve been in trucking for over 25 years. Buying a new truck is absolutely nothing like buying a new car. you get it dirty and with an empty tank of fuel.

[@CopperCreekCuts]

Haha, now I know! :D

[@MrLangDog]

I was pissed at that welding job and it wasn't even my money !!! Looking forward to some garbage smashing !!

[@ashman8613]

A blind man on a galloping horse will see that atrocious welding job.

[@MrLangDog]

@@ashman8613 I know right!! I used to have a cheapie campbell-hausfeld flux core welder and I did much better work on similar material with no training!!

[@twistedtrucker3076]

That panel, that was welded on, needs to be replaced on the dealers dime. Completely unacceptable! Those mud flaps, vanity plate, and any decals with the dealers name, should also be replaced/removed. I wouldn’t advertise or promote that dealer after that experience.

[@CopperCreekCuts]

Thanks for the comment, next Saturday will show the first use of it! (Which is about 3 weeks ago)

[@jacobmiller4928]

I would remove the dealer plate and get a local shop to fix it. Either with a full replacement or a flat plate over the weld area and work the warp out of it. I think the plate will eventually fall off. The bad weld into paint and bad settings, the blow through, and the unpainted haz develop a crack fast.. Its going to catch air at higher speeds and just vibrate until it rips off.

[@tvandbeermakehomergo]

I would try and get the dealer to pay for that as well, as they totaly messed your truck up!

[@CopperCreekCuts]

Once I start making a little money with the trash route I'm going to see about replacing the whole panel.

[@FireExtinguisherEnthusiast]

That’s awesome that you got a new truck! Also I would more than recommend to have a 20lb. ABC fire extinguisher mounted on the outside in a vehicle bracket. The fire extinguisher that you have in the cab is only a 2 1/2 lb. BC extinguisher which won’t put out much fire at all and it also can’t put out A class fires (ordinary combustibles). Hope you get a nice 20lb. ABC fire extinguisher for the truck and wish you the best!

[@Unknown-pc9yq]

At least one.

[@tylerwelty2059]

I would definitely add a bigger extinguisher and consider mounting a bow rake, push broom, and square shovel. Bow rake so if you unfortunately get a fire inside the trash compartment you can dump it on the street and rake it out. Broom and shovel so if trash spills, you can clean it up. And finally, add a trauma kit. You mentioned how many ways the hydraulics could kill you. Having a trauma kit in the cab can help prevent a lot of those.

[@CopperCreekCuts]

Appreciate all the suggestions and feedback, duly noted!

[@joshuahill5271]

@@CopperCreekCuts It can also help with insurance premiums and insurance payouts, E.G I am properly equipt, etc.

[@bjm275]

Who let that guy weld??? What a joke

[@rudolphguarnacci197]

Amateurs. Everywhere.

[@CopperCreekCuts]

I don't know much about welding, but if I touch my stick to something and it EXPLODES A HOLE IN THE METAL, I'm going to stop and ask someone if there is a lower setting...😂

[@jelinektreeservice]

I would’ve told him keep that truck. I’ll take a different one and don’t weld on my new paint job. What a bunch of crap.

[@roberth3200]

He told the boss man that he took a class. The class in question his friend that just bought a welder.

[@louskunt9798]

@@roberth3200I bet he’s also a certified forklift operator. 😂🤣✌️

[@bjm275]

That noise is probably the cooling fan

[@timderks5960]

Yeah, I'd say so too, sounds like an electric cooling fan. Pretty sucky if it's an on/off fan though, and not a regulated one that just goes to the required RPM.

[@kenleppek]

That's what I was thinking. Sounds like a fan clutch engaging and disengaging

[@joshuahill6153]

Yep, Isuzu signature noise.

[@CopperCreekCuts]

Thanks for the feedback in this thread. I was worried about it because it would cut on and off every few minutes (and only run for a minute or so).

[@sage_x2002]

@@CopperCreekCuts Trucks make that noise! Dump trucks over here make the sound too when they are standing for a while with the engine running or while driving, it's usually normal operation - if it sounds like it's rattling or the alike, that's when I'd be concerned :)

[@shifteeninjee9641]

You should get some discount on the welding mistake.

[@MazichMusic]

I would have walked away. They messed up your truck before purchase. What a hot mess that dealer is.

[@matthewcoll9845]

It looks like a thin sheet metal panel that come soff with a couple of screws. If the dealer is that concerned with putting their plate there, get brackets made with a flange around the edge. 4 holes and aluminum rivets and you are done. I would think the dealer will see this video and be extremely embarrassed. I'd be sending Brad a new panel without modifications. Sure not a good look for RDK Trucks.

[@Kni0002]

I’d make sure there’s another truck somewhere else since they are not like cars where they are everywhere lol

[@CopperCreekCuts]

It's just a removable panel. Once I start getting some money in the bank (if/when XD ) I will replace the whole thing.

[@tedgerstenslager2949]

@@CopperCreekCuts Screw that, send them a letter with pictures and demand a replacement, also send the same to the manufacturer of the packer. They would probably send it and give the dealer some shit for butchering your new 130K truck. You don't know unless you try. Don't accept shit work.

[@Cam_mak]

Your definitely taking off faster than lots of other companies when they were at this stage in the game. Congrats on the new truck! Love how many little touches you’ve given to it. And my Goodness the logo looks amazing on the truck! Everything is falling into place nicely Brad. I’m glad to see your business take new big steps forward. All the best! I can’t wait to see more future videos, Brad. Amazing work as always!

[@CopperCreekCuts]

Thank you so much!

[@plasmo8714]

When tilting the cab just open both doors as far as they can go so you don't strain your back trying to power lift it up. Works well on Hino 300 series.

[@melaniekeen3611]

This is funny! RDK trucks in Tampa is where we buy our trucks. Make sure to clean behind the blade on a regular basis. Grease the controls regularly

[@CopperCreekCuts]

Will do, thank you!

[@geo752]

@@CopperCreekCutsbehind the ejector wall don’t let rubbish build up ,it causes terrible uneven pressure on the main ram joint at bulkhead and can wreck the ram and burst through the bulk head

[@teabroncfan]

Good ol post COVID customer service. The old, you get what you get and will be happy with it.

[@jaykay3071]

Lmfao! Last video “well it’s gonna take me a long time goal to get this trash truck” Next video: “WE BOUGHT THE TRASH TRUCK” 😂😂😂😂

[@CopperCreekCuts]

I may have SLIGHLTY overestimated how long I could stand chucking trash into that dump trailer! :D

[@stellarproductions8888]

@CopperCreekCuts How much could a Brad chuck trash, if a Brad could chuck trash into Big Chuck? 😝

[@themoonman23]

Lmaooooo

[@dextmorgan8897]

I just recently bought a 1 ton with a 3yard dump body and do my local trash i have little over 200 weekly customers. I'm currently saving for some type of truck like this. Interesting to watch. That noise may be your turbo spooling i honestly couldn't here it to well over my headset. I will say you live a much different lifestyle than me in a more residential area. I clean my truck weekly and service it the best i can but at the end of the day its a work truck and it snows, rains, mud season so the truck does get dirty. I will say my truck compared to my competitor's is in much better shape and cleaner which i do think makes me look more professional and that i care more about my business. It is good to see others growing in the same business.

[@ReelFloridaOutdoors]

Congratulations Brad and Kyndal on the new truck. Y’all are going to be the best in Baker.

[@CopperCreekCuts]

Thank you!

[@JMANWiSS]

I clicked on this notification so fast! I am so happy and proud of you! Keep up the good work, save your back and looking forward to continuing on seeing your baby grow. Congrats :)

[@mirrin55]

That noise you heard is likely the electric cooling fan in the engine. It'll kick on usually when you're on the interstate, whenever you go downhill or have your foot off the gas itll usually cut off.

[@CopperCreekCuts]

Thank you!

[@Bradleyandsonsconstruction7880]

The noise you where hearing is the engine fan kicking in to cool the motor off. Nothing to worry about.

[@Opinionatedguy1989]

Rdk needs to step up their customer service game. Especially with a KZbinr.

[@matthewcoll9845]

Exactly, this is THE customer you pamper and put a good show on for. It wasn't just one miss but many. Need to step their game up.

[@Pharphette]

Seriously. They dropped the ball on this one.

[@matt45540]

I'm sorry people buying commercial trucks are looking for the best margins. It's not a luxury car dealership the people buying these cars are probably never going to sit in the majority of the time. Everything cost money

[@Opinionatedguy1989]

@matt45540 there are those customers who are going to sit in the trucks the majority of the time. I was talking about the way some things were handled and the damage to customer property. I know that if I were a business owner looking to buy a truck or a dozen, I'd want to be served properly. Good customer service and good deals equals repeat business.

[@CopperCreekCuts]

I'm willing to chalk it up to them being rushed and all departments having a bad day. Maybe if I ever buy truck number two I will have something to compare this first purchase to! :D

[@leetongarbo7164]

Can't wait to see it collect on Monday bins

[@CopperCreekCuts]

Thanks for watching and staying tuned!

[@MidwestTrashTrucks]

I think you should name it White Mamba. Congrats on the new truck Brad, I hope it serves you well!

[@CopperCreekCuts]

Thank you very much!

[@hlee28761]

Nice detailed walkthrough 👍

[@oliverklopp676]

Going along the riff of Copper Creek Cuts, Gary the Garbage Gobbler sounds funny

[@CopperCreekCuts]

LOL Love it!

[@Sytilical3549]

Congrats on the new truck! Been watching for years crazy how far this channel has come!

[@CopperCreekCuts]

Appreciate it!

[@Speedy2222]

@14:00 that bar you have to make sure as you buy new cans they are secured in those cars and do not fall out. all of the cans in my neighborhood waste management dropped off are missing these because the cans were so cheaply constructed.

[@CopperCreekCuts]

Thanks for the tip!

[@Pharphette]

Hi Brad. A bit random but the bit at the end about humans being imperfect , things still working right, you “loving this girl and you’re not mad at her at all” really resonated with me for totally different reasons (mental health/mistakes I’ve made). Idk if that’s just embarrassing but it’s been a rough couple days. Best of luck on the new truck.

[@CopperCreekCuts]

I appreciate the kind words and open comment!

[@GMC.Sprint]

You probably already know this, but turbos don't like to be shut off hot. I know cummins used to recommend idling the engine for a short time before shutting it off. My understanding is that the oil in the turbo bearing would cook and reduce the life of the bearing. The turbo uses oil flow to cool the bearing. Wouldn't hurt to consult the owners manual or the isuzu service department.

[@jakecday]

Hey Brad, If you happen to have a fire start in your load of garbage, dump the load! I’ve only seen it happen in front load trucks so hopefully it never happens to you.

[@numberone7674]

The noise you are hearing while driving is probably the engine cooling fan.

[@ReelFloridaOutdoors]

I was thinking the same thing. Probably the turbo fan.

[@twistedtrucker3076]

Big truck fans can be very loud when they kick in.

[@CopperCreekCuts]

Good to hear, thank you!

[@JustJarrodYT]

Dad and I watch your videos together. He’s a master diesel mechanic. Said that noise is likely a fan to cool your engine. He was also unimpressed with the welding 😂

[@CopperCreekCuts]

I appreciate his insight! Tell him thanks!

[@vegeta420z]

Wow this last week went fast. Congrats on the truck man

[@CopperCreekCuts]

Thank you!

[@jeffwhitelock1013]

If you pack half full loads you can get 1/3rd more weight full loads. Just Fyi if you don't know. When you bring your blade down instead of scooping full bucket just do half a bucket. Test it out.

[@SHOE53]

Dealers been dealers nothing never changes, and yes I want a clean garbage truck if it park beside by home now put a wrap on the cab that would be one sharp looking rig you got there.

[@CopperCreekCuts]

Wrap will be this coming Friday!

[@mikekisch5563]

the gauge is a filter replacement gauge. when it goes yellow the filter is starting to get clogged.

[@CopperCreekCuts]

Excellent, thank you!

[@BigdaddiZ]

It’s been a loooooong time coming Brad! I’m glad yo FINALLY got that trash truck you’ve been working WEEKS to get😂. Just kidding brother, I know you work hard and your past work has put you in the position to be successful in any venture you take on! I look forward to seeing more of the truck in action!

[@sunrisegarbo]

Fantastic video - can’t wait to see more footage of this truck !

[@CopperCreekCuts]

Thank you!

[@davidjones8524]

That’s a good investment😂

[@ackack612]

Well...that was as thorough a walk around that would make ANY auto/ truck dealership GSM giddy with envy...as in, 'how do I get my team to this level with each customer?' Like everyone else, here's hoping you have years of trouble free trash pickup operations!

[@CopperCreekCuts]

Many thanks!

[@jasonkatin5833]

It’s very inspirational to watch you on your adventure to grow your company. I love that in three short months you have already made a big purchase of a garbage truck. Keep it up man I can’t wait to see where this company goes. (In the sense of a few hundred cans. I know your not going much bigger than that.)

[@rodneystewart8958]

Congratulations on your success best wishes for the future

[@CopperCreekCuts]

Thank you for the comment!

[@Trashmaster18]

Yayyyyyyy! That’s awesome, you’ve gotten so far in this company and I’m so happy to see you with a garbage truck now😊

[@CopperCreekCuts]

Thank you!

[@famousamoso7]

Loving the the truck. And to think a month ago in a video you didnt think/plan to have a truck for "years" down the road. :) Glad to see everything working out for you and the business.

[@CopperCreekCuts]

Yeah I was WRONG on that one! :D

[@JailEnforcement]

OMGGG YAYY! I just have been flying for 48 hours and got layover for 20 hours at an airport but even though I am barely awake to watch this I am SOOO EXCITED now for ur business this was the best thing you could do. Can’t wait.

[@CopperCreekCuts]

Haha, glad you got to see it!

[@h418lfc]

Most importantly, pat yourself on the back, a credit to you and your wife, this is where your equipment actually helps your day work for you. Im biased as i own an izuzu truck but that thing is awsome. That dealer has some real improvements to make to stay in business, and that was not welding, my very young nephew has welded better than that.

[@CopperCreekCuts]

Thanks for the kind words!

[@kevinsutton7752]

So I am an Isuzu tech and there is a major recall going around right now for the reprogramming of the ECM and the DCU!

[@Kmax916]

Man, I've been excited for this video ever since your last one lol. Glad you got it & wont be breaking your back! Sucks you had a bad experience with the dealer

[@CopperCreekCuts]

Thanks for watching!

[@TowTruck816]

You never get a full tank of fuel when you purchase any sort of a commercial truck. The engine reving doing is the VGT on the turbo. Part of the emissions system. That sound is normal. Hope that helps. Good luck.

[@BradSmithSC]

Beep-Beep Nom-Nom. The Garbage Gobbler isn't just a truck but a friendly neighborhood character. Your customers adopt this hungry truck and take care of it by feeding it regularly. Of course, googly eyes are an absolute necessity. For social media marketing, you could embellish the truck with magnets dressing it up for each of the holidays. This approach turns a utilitarian service into an interesting character with its own backstory, hopes, and dreams.

[@CopperCreekCuts]

Thanks for the feedback!!

[@truxnNtraxRme]

Hi Brad, 1st off I want to say that I just created this account just to respond to your vidio. I was the 3rd gen of of our family own scavenger service in the north Chicago verbs so I found your channel interesting, venturing into something with out knowing much about the pit falls that you will face. I think you did the right thing buying that truck, with 200 90 gallon cans, I couldnt see much future with out it, other that a busted or worn out Brad! With the Hollidays comming up, you would have a very hard time to keep up, at the pace you had with the pumpkins, Thanks Giving dinners, Christmas parties and Christmas itself. I know you will take care of that truck, just make shure you check the inside of the cab for loose items, even behind the seat before you lift the cab, if you dont, you will be buying a windshield! Run empty with the pushout blade forword for a better ride, and at the dump, unlatch the hopper then run the packer blade up to clear the hopper before you raise it up to unload. You maybe know all that but I just thought I wpuld put my 2cents in from a 73yr old garbage man Good luck Brad, I hope you grow and prosper and I cant wait to see your next vidio and see you say,( why didnt I do this sooner ) at the end. Oh, I dont know how many c/y that box is, but how about "the Bakers dozen".

[@justinsorenson9170]

We need to leave reviews on their site so other people are aware. Do your part!

[@Dnf6517]

The dealer was rushed like Brad explained. Do not spam them with negative reviews. The owners there have a family and need to pay their bills. You don't know much about RDK.

[@CopperCreekCuts]

I don't think anyone should leave a negative review somewhere unless they are a legitimate customer of that business.

[@drewmurphy2796]

@@Dnf6517rdk the extremely overpriced dealer? Place is a joke.

[@24allix]

We've got around 60 different trash trucks - biggest advice with those packing handles is to make sure the rubber/plastic cap is in the hole at the top of each detent valve. If you don't have a cap in the hole pack it with grease & find a way to keep water from getting down it. Your handle detents will rust & stick then your functions will get stuck 'on' until you yank on it. This will kill your pump via continued deadheading. Also - every body builder I've met would recommend using high idle whenever you're running a function (tip, claw, sweep, wall, tailgate). The pumps they use on these trucks will die a slow painful death if they're not given enough RPM under load. Expensive part to replace when they'll last a decade if properly operated... Good luck- enjoy the new truck! :)

[@24allix]

Also - grease grease grease. Take a pic of that yellow grease point map while it's still in good shape. That truck will run for a long time if you keep up the maintenance! Oil, grease & filters are cheap!

[@noobhunter7932]

Pack Betty (play on the words black Betty) would be a good name!

[@catwithabat7163]

I hate this, lets do it.

[@nathanaelmcnaughton4054]

I'm voting for this one because as soon as I read pack Betty the song stuck in my head now😅

[@CopperCreekCuts]

Love it!

[@everettschlegel6520]

Brad, good for you. That was an awesome move you made buying the new trash truck that’s going to make your life so much easier and you’ll be able to take on more customers with no worries, the more the merrier

[@CopperCreekCuts]

Thanks for watching!

[@BrightsTrainsNTrucks2023]

omg finally that logo on the garbage truck looks pretty cool 5:16 sometimes i hear this in my moms chrysler idk what it is but i think it has something to do with heating or somethign idk

[@SewardOutdoorServices]

Wow, what a “fantastic” dealer experience. I’d love for you to make a separate video about the purchase experience and buying process of a piece of equipment like this!

[@BellaVita100]

Do it brother!! Keep grinding..

[@revfred2008]

Awesome investment, proud of you, man, and happy for you. Excited for your business!

[@kingtonymz9528]

Those ISUZU NPRs drive really smooth for their size. Love em

[@CopperCreekCuts]

Glad to hear it!

[@iananderson4897]

The fan noise could be the A/C condensor fan, not sure if the US trucks has it under the LH floor board like they are here in Australia. If it is under the cab I'd recommend getting condensor guard as it seems to attact damage, we've got 5 Isuzu tow trucks and all of them have had damaged condensors. Couple of things to know, those big mirrors will bend the tops of the doors down. Common issue that Isuzu has known about, and not done anything about, since this cab was released. More an irritation than a real problem, if the wind noise gets to annoying just pull the top of the window frame towards the cab with the window open. The Isuzu I drive has nearly 900.000 km on it and it's never had the doors replaced. Make sure you clean the filter for the HVAC under the inspection panel in the nose, it cakes with dirt easily and causes the blower fan to overheat. I'd also recommend pulling the HVAC blower fan out and cleaning it every so often because it sits horizontally and is only supported at the motor end. To much dust on the blades will kill the bearing. We actually keep a couple spares on the shelf. Hopefully Isuzu kept all the grease points on the North American trucks, if so there's zerks on the upper and lower king pins, front spring hanger, 2 on the front spring shackle, on each drive shaft uni joint, the drive shaft slip joint and the rear spring hanger and shackles. I've found the dealer sometimes forgets to grease them, we grease the trucks weekly .

[@brooklynboy4224]

Since your garbage cans are Orange....Name your truck "Orange Crush"

[@CopperCreekCuts]

Nice!

[@dericgayde]

Awesome! Looking forward to hearing your review on this truck! I am in the dumpster roll off business and get alot of request for trash service and we have been considering it heavily. Best of Luck!

[@doodlemoogles9325]

Name for the truck- Chompy 18:58

[@CopperCreekCuts]

Love it!

[@doodlemoogles9325]

@@CopperCreekCuts thank you!!!

[@acesanitationserviceinc]

Congrats on the upgrade. Bizarre that a business would risk losing any returning customer by not topping off diesel/def and making sure customer is 100% excited about the purchase.

[@CopperCreekCuts]

Maybe if/when I'm buying trucks at your guy's level I'll get the red carpet treatment!😂

[@acesanitationserviceinc]

@@CopperCreekCuts Let me know when and I'll let the guys in Scranton,IA (New Way) know you're coming!

[@kevinbabicz]

Name Idea: The Grime Reaper

[@porkypunks6623]

thats a good one

[@cassidywest5539]

Truck name: "itsy-bitsy, teeny-weeny asian pick-up trash machiney"

[@AndrewAntonelli-dj4qt]

this is the setup my sevice uses, they are becoming rather large and seem to be doing good with that size truck, great buy

[@CopperCreekCuts]

Thanks!

[@phoenix-rising-86]

6:25 You'll need to run a new line or source the break(waste of time) and it's good practice for when an important wire breaks and you have to fix it. There's more play/flex in those truck bodies and wires tend to break randomly over time.

[@nicevans6239]

Chitty Chitty Pack Mac! Love watching your business grow! I work for Howie’s trash service in Manhattan KS.

[@phoenix-rising-86]

12:26 True. I had a coworker stab the back up beeper with a pen once, if you do disconnect the audible alarm you could replace it with a light, so you know the gate is closed before resetting the saftey pins. Its just a hall sensor normally, near the top of the gate and a bottle cap works great. 🫡 If you didn't have those pins to keep the gate closed, you would have to rely on hearing that beeper, all the time incase a hydraulic cylinder loses pressure from wearing internal seals and it just popping open on you.

[@LawnCareJuggernaut]

Dude, this is so cool!!!!

[@CopperCreekCuts]

Thanks man!

[@Friberg91]

Im addicted to your videos, very fun to follow your journey :) greetings from Sweden

[@codyshirk108]

20:17 Quick tip to help with a little bit of the weight when lifting the cab,open the doors all the way ,i drive a npr tow truck and have to do my daily inspection and a cow worker showed me that one and it really does help as you should also do inspections every morning you plan on driving it as if you get pulled over or get into an accident it will help a lot showing you are being as safe as you can

[@CopperCreekCuts]

Great tips, thanks!

[@thit9674]

Great job brad. I’m sure this will help you more than anyone can imagine.

[@LittleJunkers]

I would have the dealer send me a new plate to replace the one they boogered up. Also for what you paid, everything should work! I can understand not detailing a garbage truck post sale, but there should have been a functional inspection prior to you leaving the lot and you should have gotten a “we owe” as part of your package outlining all the items to be fixed. Can’t wait to see her in action. Congratulations on the upgrade! And I would name it “Mrs. Pac-Man!

[@robertshrewsbury5067]

Glad I caught an update on your garbage business.

[@EliLayton-p2d]

Excited to see your voice over congratulations on the new truck

[@bbchick51]

Love the decals and all the best! Can’t wait to see it “on the job”!❤

[@CopperCreekCuts]

Thanks!

[@Napll3YT]

this is such a big step! I love watching your journey

[@TheLawnCareLifeinMowssouri]

Wow! Congrats on the BIG purchase! You’re going to love the cabover truck!

[@scaro81]

Can't wait to see it in action, nice truck!

[@funnyent]

So exciting to see. Thanks for sharing!

[@CopperCreekCuts]

Thanks for watching!

[@brisbanerubbishtrucksofficial]

Trucks looks mint. Keen to see the truck in operation next week

[@ondablock0304]

I just drive same izuzu In italy with different equipment since every country has their unique trucks, I love this job, gl in everything!

[@johnuhlig323]

That is going to save your back. It is great that you can provide such a service to your customers. The name of the truck should be the Neighborhood Packer with a smile. or the Trash Crusher. Have a great day.

[@davidheia8244]

Great tour of the new truck - congratulations!

[@aaro_n]

I've been excited to see this! Dorry it wasn't perfect. That welding was a joke..

[@THEAZREFUSEGUY2006]

congrats on the new truck! looks good with that logo. out of all the trucks i've seen on RDK's website, i've never seen them weld the logo to the back that badly

[@Jaylenator]

I have 10 names for the truck lol. I named my personal truck and every vehicle I've owned. 1. Trash Titan 2. Waste Wrangler 3. Junk Juggernaut 4. Rubbish Raider 5. The Clean Machine 6. Garbage Gladiator 7. Dumpster Dynamo 8. The Refuse Rocket 9. Debris Destroyer 10. Waste Warrior Hope you like at least one of them. Love your videos as always. 😁

[@CopperCreekCuts]

Thank you, love it!

[@erike7297]

Exciting video! Congratulations on that truck man it is nice. You’re moving up quick in that business. That welding bit was very cringeworthy but I’m glad the damage wasn’t a big deal functionally.

[@CopperCreekCuts]

Thank you!

[@TheAwesomeSam]

No more liners!!!! i can wait till next week's video for the answer, but you mentioned you used this trash truck 3 times already. how has your time improved during trash pick-up? or do you think you need more practice with it before you can get quicker at each stops?

[@CopperCreekCuts]

Great question and will cover it! First day was slow. The first half dozen stops were 5-8 minutes because we didn't realize the PTO high idle Cuts off if you press the brake. My wife put it in park and was holding the brake and I couldn't get any life out of the PTO. Thought something was broken until we figured out she was pressing the brake in and it was connected somehow. We are now down to about a minute a stop! If I don't have to pack the trash (if we are in a neighborhood and can drive to the next can with trash in the hopper and the slide/packer up), it only takes about 20 seconds to get out, tip the can, and get back in.

[@jonathanmontgomery7675]

When you're getting full and your ejector blade is all the way back, be SUPER careful if you're going to keep trying to compact it. I've seen a lot of panels get totally bent way out of shape because of operators trying to pack and pack and pack and it's a long, expensive pain in the ass to fix. Otherwise, congratulations on the truck!

[@markjobin427]

On what brand and model of truck? Never been a problem on the RL8.

[@jonathanmontgomery7675]

​@@markjobin427new way but don't know the model. They ran three or four different new way rear loader body styles. I ran a front loader so I never had it happen to me but seen those trucks in the shop for it a lot.

[@Kni0002]

Cant wait to see the first run with the new truck

[@CopperCreekCuts]

Thanks for watching!

[@sebastians.4221]

So happy to finaly see the new truck. The poor customer support is kinda sad for the money u spent but maybe that´s normal for trucks idk... Hope you always have safe trips in your new truck and that it will last for a very long time. Safe trucking Brad!!

[@DumpsterMarcus]

Name it Alley! And wow that weld job 🫣. But the trucks awesome!!!! Hope you all the best with it!!!

[@CopperCreekCuts]

Thanks 👍

[@zenontrainstrucks9433]

Awesome video and truck! I think RDK should have done way better of a job ngl. Btw 2 things. 1. For the button that is not work on that side of the truck, you could just make a signal with your wife for go, stop, and back up. 2. I think you should call the truck either trashy or smasher.

[@Historail]

Excited to see it workingggg

[@Bum-gh2zi]

Keep an I on the DEF regen, I used to drive the same model of Izzu. Three different years and everyone of them the regen system had to be fixed several times in a month.

[@cantgetright742]

Why do all my faves have to release videos on the same day? Killin me!!! 😂 I’d recommend a check list to go through for garbage day. Make sure everything is in working order and good to go.

[@CopperCreekCuts]

Good tip, thank you!

[@cantgetright742]

@@CopperCreekCuts it seems like it would be pretty easy to forget something, maybe save some aggravation somewhere along the line.

[@Lander91L]

Also because it’s a cab over truck don’t keep anything that isn’t tied down in the cab otherwise you will not could or maybe you will definitely bust out ur window it’s happened thousands of times to people experienced or rookie drivers just remember to take extra precautions and bring loose items out of the cab especially heavy stuff

[@CopperCreekCuts]

Very good tip, thank you!

[@Lander91L]

@@CopperCreekCuts my grandpa drove truck and it’s happened to him just a good rule of thumb never keep anything you don’t need in the truck because you WILL forget about it until it’s sitting on the window lol

[@delawaretrashcancleaning]

Same chassis we use for our big cleaning rig! Congrats on the new truck. 😀😀

[@CopperCreekCuts]

Thank you!