CORNWELL JULY 2024 BOGO MADNESS!!

[@vicktorpatriot1430]

No reason for Cornwell to have any tool box or cart made anywhere but in Ohio since they bought out Kennedy manufacturing that has made machinist box and custom boxed for special tools for the United States Military . With Kennedy factories in Van Wert and plant they already had in Northeast Ohio they should not have any chinesium boxes at all

[@eric63377]

I have a Cornwell Pro Series green 76 inch I think toolbox with the hutch and lockers. It's all made in the US and the drawers open from the pull handles

[@markusa5521]

I agree vicktor patriot why ruin a good thing look at john deere closing all us factory's and moving to Mexico WTF FJB. If the states they are in are killing them on taxes moving to a state that's fair

[@baja-automotive]

The reaper bolt extractors are a must! I love there the only company the have in between sizes for rusted rounded bolts. I bought mine off the truck because they warranty wear and tear (like drill bits). I’ve gone through a dozen in the last 5 years

[@baja-automotive]

8:57 I love my Cornwell socket wrenches, I use them daily. Everyone that borrows one eventually buys a fully set of their own

[@warrenblanchard889]

Wish I had access to a Cornwell dealer also

[@eric63377]

They have great tools i mostly buy Cornwell. Buy them off their website if you don't have a dealer

[@bobbygarrett9588]

Thanks CP for Sharing! Thank God, I just got transferred to a new shop! This Cornwell Rep is on time!It’s amazing what a few miles makes as far as territories go!

[@CPthetooladdict]

That is awesome!

[@jefftovani5535]

CP is in the house just check-in in my friend!!! Hope all is well my friend!!

[@coltmcbroom4545]

I think you should do a video on your cornwell cart of about what you don’t like. I really like the cornwell platinum box in the flyer. If I was to buy a cornwell box that would be the one I got.

[@sagedeboer5511]

Jeez those 1/4 swivels are a steal, I’d be on those like stink on shit if I didn’t already have 2 sets already

[@IMPACTRATED]

The 1/4 swivels are a smokin deal! Full set, USA MADE, i paid double that for 6 sockets from snap on🙄

[@timwindsor03]

Nice flyer. Thanks for sharing. Keep the content coming. Hope you have an incredible night. Much love and RESPECT

[@CPthetooladdict]

Thanks, you too!

[@DON_TOOLS]

I rarely see cornwell trucks in my area. I was driving the other day and seen one posted at a local shop. I headed over and introduced my self and had the rep order me the 1/4 swivel impact set 🔥. Said they were backordered but will be in sometime in August not bad for the price 💯. Now got a cornwell rep as well.🤙

[@CPthetooladdict]

Thanks for sharing

[@warrenblanchard889]

Great video loved the wheelie😂

[@CPthetooladdict]

Glad you enjoyed it

[@davidwalle5025]

Two cp reviews in the same day. Good job

[@baja-automotive]

1:56 on the cover page, who do you think is making those double flex long reach wrenches?

[@CPthetooladdict]

Kabo is making all the wrenches for bluepower

[@Nordman555]

Amen to the cheap tools. Once you try the best you cant go back even for fyi

[@VorsprungDurchNik]

How are these Reaper/Turbosocket/Razorgrip extractors different from Irwin's? They appear to be very similar... I've used Irwin in the past but it seems like each socket is really only good for a few uses before they stop working.

[@blood4mon3y55]

What's up CP!! I was wondering if you could help me out. Is there any other ratcheting wrenches that can hold onto the astro nano sockets? I have there 17mm long boy however I'm looking for one that is smaller and has the c-clip or whatever that will keep them from falling out. Thanks.

[@justinvanburen8259]

Thanks for another great video!!

[@CPthetooladdict]

Glad you like them!

[@markm0000]

That photo… oh my

[@georgeferlazzo7936]

Hello again, CP Thank you for another Great Video 👍 Enjoy the 4th of July, stay safe 😊

[@CPthetooladdict]

Thanks, you too!

[@123donmaster]

I got the USA made 1/4 impact swivels for half off in my cornwell flyer, i couldn't believe the deal, $249 for 5-15mm impact swivels that are normal $590!

[@hancockautomotive1522]

I have the vim rfw set. They’re awesome.

[@TooljunkieDave5215]

I’m still bummed I don’t have access to cornwell tools!

[@masonchristopherr]

Where are you located?

[@larryborkstrom3580]

It's nice to see a Cornwell flyer Stanley and black and Decker got a winner by selling them everywhere 😂😂

[@CPthetooladdict]

Lmao 👌 🤣

[@peterchristlieb]

Brother CP, I saw Husky is now offering a featured hex socket and key and they’re calling it the “Bite”

[@peterchristlieb]

Brother CP, I saw Husky is now offering a featured hex socket and key and they’re calling it the “Bite”. You’re 100% right about the $31 hose pick set, I’ve used mine daily since I bought it along with the 4 piece large hose and seal picks. The Cornwell Dinghus handles really do feel good in your hand. If I didn’t use the damned thing every day, I’d send you my fine tooth flex head ratchet to review. Can’t speak to the blue power as they look just like Capri/Die Hard heads but the USA ratchets are on par with the best

[@markusa5521]

Im with you that CP buy once cry once and it will last you and for the most part work every time to get the job done. The chesp tools go in the rd box

[@hancockautomotive1522]

I’m really surprised snap on hasn’t come up with their own design for rpt. Would be nice to see a USA made version

[@marcusgoetz8311]

What up cp!!!!!

[@87Stang]

are those long double flex wrenches exclusive too cornwell ? i dont have a cornwell guy only snap on , mac & matco & they dont sell them

[@CPthetooladdict]

Yes

[@Heavydutyoilslinger93]

Are the bluepower impact sockets worth the money ?

[@CPthetooladdict]

Ya I don't think they are bad at all not my favorite but they work well

[@Heavydutyoilslinger93]

@@CPthetooladdict what truck has the best ?

[@CPthetooladdict]

I prefer mac impact sockets usa made ones

[@baja-automotive]

Omg 🎉 First

[@CPthetooladdict]

🏆 🥇 minty 👌👍

[@markusa5521]

CP are the blue power brand made in the same factory as icon? Ive heard they are

[@CPthetooladdict]

Come on, why would you even think that smh 🤦

[@miscprojects9662]

No issues with the Cornball impact sockets but wouldn’t buy their ratchets again.

[@nealdownn3365]

cp i might be a dumb bell, but if you are going to show something would you not show it so someone could see what you are talking about instead of micro fiche format. other wise you got a real good thing going wolf

[@CPthetooladdict]

Maybe you should have done a search before you opened your 🐓 holster bud. I've shown them many times I own them, you insufferable maggot.

[@nealdownn3365]

@@CPthetooladdict maybe you misunderstood me but when you present a tool flyer you can not really see a part number or any other script is what i was trying to say if that is offensive i am very sorry maybe you could give me a response why it could not be filmed larger is all i was asking wolf

[@baja-automotive]

The reaper bolt extractors are a must! I love there the only company the have in between sizes for rusted rounded bolts. I bought mine off the truck because they warranty wear and tear (like drill bits). I’ve gone through a dozen in the last 5 years

[@CPthetooladdict]

Ya H.B products makes those 100 bucks on Amazon lifetime warranty snap-on sells them for 350 under Blue-Point same exact Tool lol