Correcting Fitment with Custom Suspension! + Sideswipe Payout!!

After I was side swiped in my 300zx z32 project car, I had to battle with insurance to get a check. We finally get everything squared away with that!
My bigger concern was the ride fitment, particularly in the front end. After installed 240sx s13 suspension in the front and installing Stance Coils, the 300zx still did not have enough camber to my liking. I fabricate stock 240sx s13 lower control arms and extend them 1 inch to correct this problem, now the car sits perfect!
Final Bout is this weekend! Which means 100s of the coolest cars in the country are local. We visit the Final Bout pre meet and meet some new faces!
PrizzaMerch:
prizzamike.mys...
Become a Member to access perks:
/ @prizzamike
Spotify Playlist:
open.spotify.c...
For more behind the scenes:
Instagram: / prizzamike
TikTok: / prizzamike
Snapchat: @prizzamike
Discord: / discord

[@brianwilde6396]

Hey I am 61 years old hot rod and racing guy, I have been watching your channel for couple years I dig your video. Keep it up nice to see young dudes doin their thing. Wish you much success.

[@PrizzaMike]

Thank you so much! It means alot!

[@MathieuG89]

Humblest car guy I know. Lots of respect for you. And great content as always.🤟

[@fluffyduffy911]

fax

[@wadebiddlecombe5486]

Agreed

[@Antiliv.]

glad you actually got a payout from the side swipe, dude was such a baby about it too lol

[@DentSideDee71]

I got hit a few months back and it took forever just to even get a reply back lol and that’s California

[@Antiliv.]

@@DentSideDee71 that's wild, it can be the same over here though tbf, a lot of ignorant ass people trying to fight even though they were at fault

[@imnota]

He can be happy, here given the condition of the rest of the car they would've argued there's no way to tell what damage is actually from the accident and you'd get the bare minimum

[@adamfarkasbdp]

Love to see more members as time goes by 🙌

[@PrizzaMike]

💙

[@crystalcactuis.w]

I love these videos not over edited and not under edited you found the sweet spot this content is Awesome

[@joshuaevans3226]

Love the spokes on the veilsides. Been thinking about picking up a set of 3dsm .05's myself

[@PrizzaMike]

Such a classic!

[@ashleedanvers9945]

Still here months later Loving this channel and I wait for every post . Your a vibe bro your going place’s Fr and the builds are coming a long wayy

[@Minitrucks_and_motorcycles]

Love the videos dude! They’ve been getting me through a tough time in my life. I’ve had to have some major surgery and I’ve been laid up in bed enjoying your work! Keep it up man!

[@Bigsgarage]

I was so happy to meet you today, are talk was short, but you are a super chill dude, and you signed my hat! keep up the fire content!

[@aliarslan1359]

Bro, do not mind about those „friends“. Whatever i knew a guy for 15+ years and now its the same as you said. Know to see the real people who are more than friends like family..

[@TSUMO888]

The only channel where I itch for the next video to come out😂😂😂

[@Alex-vz2jz]

Love each and every video. You run into a problems and find ways to solve them. Many of the things you do to solve them I wouldn't have guessed to do. So thanks for all these solutions.

[@coolestera]

always a good day when Mike uploads, keep it up!

[@addisonha2457]

That hits hard when you see an old homie that you don't talk to anymore 😢

[@quinnsanborn7720]

Gotta be one of the best car yt channels on the site, every video is a joy and keep up the great content homie!

[@SimpleManMike]

Mike idk how you do it but your videos are very addicting

[@s13_spence]

20:47 is a nx1600 cluster it's a super cool retrofit for s13s

[@largetarp]

22:20 finially some good SC's! proud soarer owner myself

[@s13camm]

Another day another awesome video! good luck for the Z. keep up the 240 content we all love it :) also you should try drifting the Z again!

[@TFO6969]

Awesome vid i watch loads of others car building channels but yours is the only one I dont skip

[@Oxyenless]

1:13 the stud is right there though

[@PBJPRODUCTIONSTUDIOS]

awesome video man 21:46 really made me sad man not sure why Americans get like that lol but Im loving the KZbin grind one day you'll be big big

[@Driftking11444]

i love how postive you always stay bro keep up the work

[@luistraslavina8751]

Love the way the 300 Z is looking. You make me wanna get one. Keep up the good word, brother.

[@luistraslavina8751]

Keep up the good work

[@david929190]

Get yourself the ball joint separator kit. I stopped leaving apprentice marks all over suspension stuff a couple years ago and never looked back

[@Tredecim1331]

This is fr my favorite channel, nothing is rushed, its not an overbuild every single time, fun transitions, what else do u need??

[@lowercase.]

dude that meet looked so cool, wish we had meets as clean as that here in the uk. also glad you got a big payout from that side swipe, please keep the Z in that green!

[@dee2804]

Mike, do everything you can to defend your case. My brother got side swiped pretty badly where the door skin actually got ripped off his car. He made a poster board detailed display of how the accident went down and he won his case. I'm sure Franzy would be happy to help with the art project too haha. It also shows the judge you care and are serious about the case. All the best to you and the car is looking great 👍

[@Effect2o]

Dude, I love your vids!! Always so cool to see what is coming next! We really only get old farm trucks around here, so its cool to see the love of other cars! Keep up the good work!

[@reskaill9684]

NOW IT LOOKS LIKE A PROJECT CAR :). It looks so great man keep up the good work

[@Ronnie_S]

21:47 oof...I felt that. I had to rewind a few times and turn on CC just to make sure I heard correctly because you seem like a likeable person. I definitely could relate as I had experience this myself a few times. I'm glad the situation with the insurance claim worked out for you (as it should). It was great watching you fabricate the steering and suspension setup for the Z32. Got me wondering how many parts are interchangeable on my car across the same brand, manufacturer.

[@morrow49]

Man you working in your garage is the absolute best.. once every KZbinr gets a shop. I just kindve loose interest. Love your videos mike❤

[@JoltJay]

Man I don't own a car yet and I was starting to lose interest in getting one after seeing so many crashes but watching your videos brought my interest back.

[@topsyll8910]

Nice seeing you happy mike, it leads to brightness.❤

[@thunderheartgaming4416]

Loving how the cars are turning out and man i dig them velside rims sweet car looks good stanced

[@owldude9581]

That flint idea is truly brilliant!

[@psementalist]

PizzaMike, you are one of the most nicest chill car guys i had quite a few Ford Probe guy's ask me what salvage yard . You found that PGT in i got Ford Probe buddies who are looking for parts for their's

[@asosa7100]

That meet was sooo awesome really nice stuff 🔥 the Z looks so good sitting right 💯

[@Ricy013]

men I love your channel since video one, its so good to see someone that passionate and really loving what he does. Keep living it

[@mitch9427]

Honestly those Veilside Andrews suit the ZX so well i think you should keep those on it!

[@GabrielFujiwara43]

I just love seeing ur videos, cause it inspires me to get an car that was unloved and bring it back to its former glory

[@Gsr_automotive]

15:04 "micrometer" Patrick that's a Caliper

[@JDHawke]

You and Jimmy Oakes are my favorite KZbinrs! Great work as always

[@ferroweld1594]

the veilsides look incredible on this car, i hope you get another pair!

[@yannicg]

In my opinion I would set the ride height just a little higher, maybe so a finger can pass through the gap between the tire and the fender, that way you have no problems with rubbing inside the wheel arch or on the frame rails and personally I don’t think it looks bad, I actually kinda like it more, form follows function yk? Like that mk4 supra on the car show, that’s the perfect ride height if you wanna go low and still have the car handle well and function properly

[@LindaPls]

crazy how much lowering a car changes the look! have an is200 and i really want to lower it, but cant really afford to and it might be good to have it a little higher during winter anyway. lotta snow where im from

[@RayquazaKing04]

Your weld job would absolutely STUN my old highschool shop teacher lmao

[@dustinthedrummer1]

Quick welding tip, once you tack take grinding disk and bevel out the metal so you get even better weld

[@Fb6_chriss]

You should definitely invest in a shop bro, it will help you expand more get a lot more space too.

[@setend6839]

Always a good video. One word of advice, PLEASE check your wiring harness above the wheel well to be sure it's intact and it doesn't burn down

[@veitnams]

always learn something from your vids. keep up the great work!

[@reproducable]

glad to see the balljoint problem fixed!

[@devin7729]

Omg the Z looks so good I love the chrome rims

[@runwithit7438]

it’s a good start to a good morning thank you for the content

[@Patrik2166]

Me still trying to fab together that Schumacher Mi4 Drift RWD conversion :'D

[@evelynsalazar6057]

I have so much respect for you and your build God bless you and your family and friends please stay safe out there with the crazy drivers out there

[@RJIGGLES]

Thanks!

[@PrizzaMike]

Thank you!! 🙏

[@RJIGGLES]

@@PrizzaMike Really enjoy this channel and figure any little bit I can do to keep it going. Wish you the best and really love the content.

[@qwertyuioporz]

keep the videos coming mike! its always a great day when you post :)

[@wzki.4343]

That is a nissan nx200 digital cluster, looks damn well on s13s!!

[@franciscosolorzano480]

Do that cut fender with a spring the low Honda bois do.. allows the fender to flex with the wheel as u turn

[@brandonvieira8096]

@20:59 That's a NX1600 Cluster. Takes a custom wiring job to install but it looks dope AF.

[@Dillonwiththe40]

Always learning something new watching you, idk how you have all this information in your head

[@Nasrions]

Love how far the car has come

[@jessebautista4194]

I decided to go to JJC to pursue automotive after being a backyard mechanic for a while because of your video on it!

[@PrizzaMike]

That's awesome!!! Tell Mr. Graf I said hi!

[@fredd3.14]

the z32 needs a rear wing! any plans for that? love seeing you save and build the car btw

[@trx259]

didnt he have some cool ass wing for it, just waiting for the rest of the bodykit (rear bumper and skirts)?

[@fluffyduffy911]

​@@trx259wasnt it front bumper?

[@trx259]

@@fluffyduffy911 i think he has the front bumper and the wing, and is missing sideskirts and rear bumper

[@Lem-k9i]

Absolutely love your videos ❤ and the Z 😊

[@aurimasmaldzius5345]

@15:43 those work wheels are similar to the BBS ones you can option from factory on these z32's :) good choice

[@Efosixx]

I alway get hyped watching your videos !

[@35Zabe]

can’t wait to see the vsxx on the z! my fav wherl

[@anthonyclark2520]

found you abit before the ZX, now I want an Integra thanks to you :)

[@BOOT]

Nice work, doesn't have to be perfect since there is adjustments. Gotta move some ball joints myself for one project.

[@SooJDM]

I’m running the same treads on some work dd3-sr’s! 17x8.5 on a 2014 500c abarth

[@LexusssLSC]

Love how well the cobalt green looks so good with the chrome wheels, dream fitment.

[@johnson_finger]

Awesome car man. Can't wait to see what more you do to it.

[@Namazudesu]

That wheels will perfectly fit to Z 🔥🙌

[@lawnchairacer]

i'll miss these summer days

[@zask0]

these veilsides looks sick on Z 🔥

[@schassis_eddi]

I know it’s too late but Villains sells weld in LCA extensions.

[@Silver_Surfer_7744]

Mike The Electronic Cluster On That Sick S13 Coupe Was From The Nissan NX1600

[@jasonpetrich4141]

Love the r32 and the r34 skyline absolutely so beautiful 😍 , could never ever afford one but sick cars. Dude the flint is a sick idea just like titanium drag blocks!!!! Hella cool

[@CANYONCORBIT]

She's looking much better 💪

[@Sebbaru93]

What's your camera set up? Love the quality, these are honestly the only videos I look forward to watching nowadays.

[@ExotizzTV]

The moment i been waiting for Slam 300zx

[@82mjoseph]

Both my dream cars 300z n da 240 nice job mike

[@kyletarr4340]

This guys deserves at least 500k subs

[@guyslifee3215]

killing the content bro. keep it up

[@crumb0000]

Bro, ;'box' those from lower control arms. So just weld in the fourth side of the box, you know what I mean..weld in a patch that converts the profile of the lower control arm into a box. There's two reasons you ought do do this....1..the way you guys drive must cause deflection in the side profile, ...the lower control arms twist under hard load...weld in that patch in theres no more twist. No more twist equals better front grip which equals more grip at the front of the car which means means more oversteer during manouevers . second reason is for strength, youve added an extension to the LCA, the patch will ensure those welds never get twisty metal fatigue.which means those welds will never crack.

[@LRSNRCNG309]

Man i havent seen a set of vxxx's in a minute 🤟🏻

[@nzuncovered1845]

You can use a bench vise and a hammer as a brake, thers also an actual small brake you can buy that adapts to your vise

[@HeartLessGem_]

Best part of my night fr 👌🏾

[@theotakuzaku5024]

That Digital Cluster is out of a Nissan NX! They fit the S13 dash pretty well but is short on the sides.

[@robbalinski1606]

The problem with slamming cars low like that is you just destroy them. nothing wrong with an inch of wheel gap, looks better imo and is vastly more functional. Keep up the awesome video's Mike, I'm hooked on your content now.

[@ridhwan1237]

yoo mike , please maintain emerald green broo , that colour so minttt !!

[@PROBL32M]

after real drifting and cars rc cars are very good hobby to have damn thats cool i would kil for that kinda friendgroup

[@DentSideDee71]

Z looks so good

[@RenÉ_MiG]

the tial s13 coupe from AZ has a pretty sick one of a kind SR20

[@dvldrvr420]

That cluster is a mod. Out of a Nissan pulsar nx1600. Awesome digital cluster.

[@Garage-1881]

Love this channel man 🖤⚡️🖤 You should see the dirt yard here man....dead bodies for sure somewhere and mou tains of cars stacked for what looks like miles.

[@rcstarz5206]

I would love to tandem with you and your rc drifter brother man. Another great video as always.

[@rubimk3]

the meet had some bangerssssss