Make a Fancy Leather Keychain from Scraps

  Рет қаралды 86,392

Corter Leather

Corter Leather

Күн бұрын

► TOOLS & MATERIALS: www.buckleguy....
► PATTERNS: corterleather....
Make a Fancy Leather Keychain from Scraps
We got tons of requests to make a tubular leather key chain after our rolled handle tutorial, so here we are! Tubular leather keychains are super, super nice - they're a great gift for anyone and they look extremely classy. We take you through making a nice fancy leather keychain with little more than a few scraps from the scrap bin and a split ring - that's seriously all it takes! This is a super fun leather crafting project, I hope you make many beautiful examples!

Пікірлер: 98
@nobracobra
@nobracobra 2 жыл бұрын
funny thing... i viewed this and many of your vidsf when i first started leather crafting... ummm, im still new, as ive only been dabbling for a few months... it was way over my head at the time... sooo, i believe im ready for this next step... overcame the fear of stitching, zippers, cutting curves, wet molding, skiving, and finally attacked a gusset lol your vids have helped me sooo much... tyfs
@bobhunt2651
@bobhunt2651 6 ай бұрын
My local Tandy didn't have any of the 3mm leather cord. I went to Walmart and found some 3.6mm rubber screen spline. The material is used to hold screen cloth in place in a screen enclosure. It is flexible, takes well to contact cement, and you can skive the end just like leather cord. Oh, and it is WAY cheaper than leather cord.
@robthewaywardwoodworker9956
@robthewaywardwoodworker9956 3 жыл бұрын
I didn't expect any willy nilly on a Tuesday! What a nice surprise.
@mypintofview
@mypintofview Жыл бұрын
Believe it or not, this keyring was the first thing ever i made with leather and giving it to my wife. I‘m new to leather working. And i made a second one to give away. Thanks a lot for your video! Hello ftom Vienna
@mbeck6319
@mbeck6319 3 жыл бұрын
Nice shot of the "Corter Pounder"!
@ZippedUpKitz
@ZippedUpKitz 2 жыл бұрын
If you don’t have any leather cord, you can use Paracord for the cord too… you can thin out the ends of the Paracord by cutting some of the inner stands out and then pulling the sheath back down… I always have a buttload of Paracord scrap in my scrap box that I’m looking for things to use it for… now, I can incorporate my Paracord crafting with my leather working!
@71chevellejohn
@71chevellejohn Жыл бұрын
Thank you! I just came back to rewatch and ask about paracord as a filler.
@jgdevoe
@jgdevoe 3 ай бұрын
Looks fun and it’ll be my next fun project. Thx.
@hagenbethell4002
@hagenbethell4002 Жыл бұрын
Thankyou I watched your video found it very easy to follow so I made my first key lanyard out of scraps I had laying around even hand stiched the edge first attempt at hand sticking
@heddaacevedo
@heddaacevedo 3 жыл бұрын
So nicely done...and easy. Thank you so much for sharing ❤️❤️❤️
@vladimirlopez7840
@vladimirlopez7840 2 жыл бұрын
Just made one for my wife this morning using this video as a guide. I didn’t make an exact copy but pretty much the same. Thanks!
@karinbischof9795
@karinbischof9795 2 жыл бұрын
this is going to be my first project after training straight cut lines and punch holes :D thank you!
@katcankan7129
@katcankan7129 3 жыл бұрын
That keyring would complement your Mum's new handbag very well indeed 😊
@Corter
@Corter 3 жыл бұрын
she already stole one :)
@Damascus_404
@Damascus_404 2 жыл бұрын
I'd love one of these as a lanyard (ID/Security pass), bespoke and functional.
@pamthetraveler7224
@pamthetraveler7224 Жыл бұрын
Thank you! An overhead camera would help with some of the intricate cuts. Hard to see at a side angle. But thanks, this is awesome
@JoseFlores-ck7hg
@JoseFlores-ck7hg 3 жыл бұрын
I’m making a few for family members, Thank You for the video and sharing ,l liked it a lot
@bunnymoon7124
@bunnymoon7124 3 жыл бұрын
Pretty work
@ClimbEverthing
@ClimbEverthing 3 жыл бұрын
You are very talented
@maciasrebollo
@maciasrebollo 3 жыл бұрын
Muy bueno y genial muy bueno y bonito
@nobracobra
@nobracobra 2 жыл бұрын
wow... super nice... tyfs
@jgdevoe
@jgdevoe 3 ай бұрын
Well, I'm using 1.5 mm leather one inch wide and there really isn't enough to stitch so I'd recommend 1.25" wide and 1 mm leather thick. And I'm using 3 mm cord. Might have to junk this and start over.
@deborahdanhauer8525
@deborahdanhauer8525 3 жыл бұрын
Sweet little keychain.🐝🤗❤️
@asgharlone7867
@asgharlone7867 7 ай бұрын
Very good video ❤
@jodymitchell1297
@jodymitchell1297 2 жыл бұрын
I want to learn this different leather wallet and bag
@simp3204
@simp3204 3 жыл бұрын
"We are gonna roll with it." I see what you did there
@mrBesov
@mrBesov 3 жыл бұрын
😁😁😁😁
@katcankan7129
@katcankan7129 3 жыл бұрын
Corter just before dinner 🤗💜
@sopatisserie1282
@sopatisserie1282 3 жыл бұрын
Waouw so nice! Thanks for sharing!
@minhngoduc8577
@minhngoduc8577 11 ай бұрын
Very nice
@donthoms
@donthoms 3 жыл бұрын
Very nicely done!
@wangxian9311
@wangxian9311 3 жыл бұрын
Nice and simple 👍
@graceland75
@graceland75 10 ай бұрын
Nice video 👍what size rivets did you use ? Thank you
@3larsons
@3larsons 3 жыл бұрын
Great video as usual!
@harbofdoom
@harbofdoom 3 жыл бұрын
Woohoo we two videos from you guys what did we do to deserve that 🤣
@creacionesydisenosdhelmar107
@creacionesydisenosdhelmar107 3 жыл бұрын
Thank you for sharing 🙏🌼🥰💓💞💕🌼🙏🙏🙏🙏🙏🙏
@chemclimber
@chemclimber Жыл бұрын
3mm 8 inch core, 12 inch to wrap in video
@devriescustomleather1109
@devriescustomleather1109 3 жыл бұрын
Nice! Good instruction.
@johnnyp2609
@johnnyp2609 3 жыл бұрын
Love your videos, do a backpack!!!!
@kotimoto
@kotimoto 3 жыл бұрын
The detailing even on parts not visible is amazing?
@SummervilleBret
@SummervilleBret 3 жыл бұрын
Looked through the comments to find but no success. What was the length of the piece holding the key ring? 1.25 inch?
@viktorija4251
@viktorija4251 3 жыл бұрын
Thank you for video. How thick is the leather should be for this kind of keychain?
@davidenglund
@davidenglund 9 ай бұрын
Really like the design. But the ring looks like it might be a hassle to move (twist) around when you are threading on keys. Have seen this with other leather key fobs also, and it makes me wonder if people will find it a hassle getting their keys on the ring. Maybe I should just buy one and find out! LoL :)
@royalmoline9197
@royalmoline9197 3 жыл бұрын
leather blunt rolling tutorial
@hopeindirect4165
@hopeindirect4165 3 жыл бұрын
Well well well some nice tips and things to learn here, when I put on ma leather, and rock to sum Metallica, Delta Parole, Foo Fighters or the Smashing Pumpkins I feel like I can do anything in the whole wide world.
@cornbreadfedkirkpatrick9647
@cornbreadfedkirkpatrick9647 3 жыл бұрын
Hey, my cousin said you have a blockbuster card you use as a model for your wallets and card case nice Iso that means I'm not the only one hehe
@georgegoudarzi8850
@georgegoudarzi8850 3 жыл бұрын
Nice corder pounder hammer. Could you advise where we can buy it. Thank you so much
@TrivMania
@TrivMania 2 жыл бұрын
Where did you get the ring ring loop engraved? Or is that a service you offer? I’d be interested in that service
@vea-vea
@vea-vea 3 жыл бұрын
Большое спасибо🍀
@youcefomar5311
@youcefomar5311 3 жыл бұрын
Thank you and good luck To you🕺💃
@cornbreadfedkirkpatrick9647
@cornbreadfedkirkpatrick9647 3 жыл бұрын
Could you make a Hair Barette with a stick through it like they use to sell in the stores I'm in need of one bad? I would like to know the basic price of a starter kit is minus the leather to start out with and who has the best for the bucks?
@unopine
@unopine 2 жыл бұрын
If my leather looked like the leather in your videos, I would never again have to purchase dye. Do you have a go-to brand or tannery you prefer above all others?
@DeltaElite46
@DeltaElite46 3 жыл бұрын
what board is that you are using when punching the stitch holes?
@ankuracharya4556
@ankuracharya4556 3 жыл бұрын
Please make a camera strap for vintage cameras.
@mrBesov
@mrBesov 3 жыл бұрын
Why you don't use a clamp for stitching?
@АлександрПетрович-д9ц
@АлександрПетрович-д9ц 3 жыл бұрын
Просто поставил лайк👍✌️✌️
@mrBesov
@mrBesov 3 жыл бұрын
Да и комент написал 😁👍
@SummervilleBret
@SummervilleBret 3 жыл бұрын
I just got an order of 3mm leather cord and it appears to be roughly half or less as thick as what you used in this video? Are sure this was 3mm?
@joseperezgonzalez7092
@joseperezgonzalez7092 3 жыл бұрын
Same here...🥴
@brianmcqueen8605
@brianmcqueen8605 3 жыл бұрын
What if I don't have a Little Wonder press?
@LaniakeaLeathercrafts
@LaniakeaLeathercrafts 3 жыл бұрын
What brand of contact cement do you use?
@Corter
@Corter 3 жыл бұрын
Barge or Weldwood
@joseperezgonzalez7092
@joseperezgonzalez7092 3 жыл бұрын
Is that cord 3mm really?
@bravey1995
@bravey1995 3 жыл бұрын
when can we get the patterns for bags and satchels :(
@Corter
@Corter 3 жыл бұрын
there are free patterns for a few of the bags in the video of those bags, we also give all the measurements through the videos :)
@fireemtguy
@fireemtguy 3 жыл бұрын
Where do you get the Leather Cording?
@bethserran
@bethserran 3 жыл бұрын
Can I order this keychain from you? Thank you
@lisahumphries3898
@lisahumphries3898 3 жыл бұрын
Is there a reason that you (and others) cut the leather with the “outside” facing up? Meaning the side that will be showing is facing up and not down when you cut a pattern. As opposed to dressmaking - when cutting out a pattern, you put the material facing down.
@fakiirification
@fakiirification 3 жыл бұрын
certain leathers "mark" very easily. you can damage the finish by sliding it around on your work surface. So best to avoid the possibility of it happening.
@danielirvine7468
@danielirvine7468 3 жыл бұрын
Nice 👍🏻 is that pounder for sale somewhere?
@Corter
@Corter 3 жыл бұрын
not yet, but soon!
@ЛюдмилаНефедова-к3ю
@ЛюдмилаНефедова-к3ю Жыл бұрын
Класс! 👍🏻
@ianthomas3653
@ianthomas3653 3 жыл бұрын
corter pounder? no cheese? But for real, are you coming out with a tool line?
@Corter
@Corter 3 жыл бұрын
We're making a few tools, yep! not sure if we'd call it a line but 3 to start :)
@Annalorraine2x
@Annalorraine2x 3 жыл бұрын
So how do you plan your day. After you get all your orders done? Not sure if my question to you are any on. No one answers. Hopefully my question are not so bad !
@kennethnielsen3864
@kennethnielsen3864 3 жыл бұрын
20ed.
@aisekaisebc
@aisekaisebc 3 жыл бұрын
Alternate title - "Just mellow it out"
@Camilio91
@Camilio91 3 жыл бұрын
You don't send the pattern for this project ?
@Corter
@Corter 3 жыл бұрын
There is no pattern - we talk about making your own and what measurements you might need through the whole video (also why we didn't provide a pattern though ;) )
@ЛиловыйЗакат-т5г
@ЛиловыйЗакат-т5г 3 жыл бұрын
👍🏻👍🏻👍🏻
@patrickwohler9263
@patrickwohler9263 3 жыл бұрын
I am interested in making some keychains like this one and I would like to use that leather cord but I am having trouble finding it. I’ve clicked the link below the video and what I see in there is not leather cord. Can you help me find some leather cord?
@debbiegoodyear5963
@debbiegoodyear5963 3 жыл бұрын
You sound a lot like the man who does paracord bracelets... Bored paracord... Lol
@alexandreelisiario
@alexandreelisiario 3 жыл бұрын
💯😃👍💯😃👍💯😃👍
@Ash_Fritsch
@Ash_Fritsch 3 жыл бұрын
That little thing is to small to so in a stitching pony securely.
@philipculbertson55
@philipculbertson55 3 жыл бұрын
Enjoyed the video but thumbs down for too many long ads that couldn't be skipped through in the middle. That disrupts the flow. Put them at the ends and allow skips.
@youcefomar5311
@youcefomar5311 3 жыл бұрын
🤝👏🎩
@guyfriedman295
@guyfriedman295 3 жыл бұрын
I dont know about you, but i dont happen to have leather scratch
@jenniferwhite6089
@jenniferwhite6089 3 жыл бұрын
help a friend to modified his side-by-side we know what we're doing in structure modified24 months it took us from the first idea to the finish and run for the first time light in the river tests at first load up with their camping gears and yeap did not float and want to turn over they don't get wet any longer too watertight too and heated cab too we padding around everything to and wrapped leather around that to we have grab handle like them and put them inside too they picked the worst looking leather we could find to we tooled most of the panels this know it would get a lot an abused to he passed away from cancer his wife still using it she more a devil then he was yea she said the leather make that machine possible
@whywhy4921
@whywhy4921 3 жыл бұрын
No
@carlosascencio9767
@carlosascencio9767 3 жыл бұрын
Yes
@JunkMailBoxStuff
@JunkMailBoxStuff 3 жыл бұрын
Maybe
@whywhy4921
@whywhy4921 3 жыл бұрын
@@carlosascencio9767 no
@whywhy4921
@whywhy4921 3 жыл бұрын
@@JunkMailBoxStuff no
@JunkMailBoxStuff
@JunkMailBoxStuff 3 жыл бұрын
@@whywhy4921 Redundancy weakens one's position to an emotional childish outburst. Need a time out? 😀🤣🤭, or is it just beyond your skillset?
Leather and EPOXY Keychains (take 5 MINUTES to make)
14:44
Corter Leather
Рет қаралды 19 М.
The Easiest Way to Wet Mold Leather EVER
26:21
Corter Leather
Рет қаралды 395 М.
Каха и лужа  #непосредственнокаха
00:15
making the most out of leather scraps leathercraft
16:26
garyipip
Рет қаралды 141 М.
Louis Vuitton Sent A Private Investigator to My House...
11:14
Corter Leather
Рет қаралды 1,9 МЛН
Scraps to Riches: 5 Profitable Scrap Leather Projects
22:17
Skill Tree
Рет қаралды 171 М.
Saving $349 by Making My Own Hermès-style AirTag Case
17:14
Farbulous Creations
Рет қаралды 10 М.
How to Make a $150 Designer Leather Keychain
14:43
Fischer Workshops
Рет қаралды 199 М.
Making an English Oak Bark Leather Belt 4K
13:55
Leodis Leather
Рет қаралды 896 М.
3 QUICK LEATHER PROJECTS using just SCRAPS || ASMR
6:33
TOTUIA
Рет қаралды 202 М.
Four Creative Leather Keychain Projects
36:44
Weaver Leather Supply
Рет қаралды 100 М.
Каха и лужа  #непосредственнокаха
00:15