Corvette-Style Spindles: Modern Reliability & Brakes for Your Classic Chevy

[@PeterHatch-mx7zc]

Have a 1986 chevy surberbon do they have a kit

[@irnwkrkev]

Do the spindles change the track width at all for a G-body? Hoping to narrow the track width like the Mustang 2 spindles.

[@Denarius18]

Ok i wanna order the spindle for gbody. Would i buy corvette brakes or just order for a gbody

[@kendawson7705]

I have c7 hubs and uprights on my 65 chevy Bel Air with 15 inch wheels

[@amcarcs]

How did you install that? Kit?

[@kendawson7705]

@@amcarcs I put this together in late 2021. At that time cpp said they were not going to make a kit. I bought the cpp c7 uprights for the 55-57 Bel Air. Tubular upprt/lower control arms for the 65-70 Bel Air. Modified both arms and turned the lower arms into a-arms.

[@devisedbydev2764]

Can you tell us the maximum rotor offset before you run into clearance issues? Where the back side of the rotor interferes with the spindle.

[@CPPmaster]

Hi, if you give us a call at (866)-882-4131 one of our sales reps might be able to answer that for you.

[@adancastaneda5156]

Can you tell me why I have this kit and seems like brakes are locking up and dragging

[@CPPmaster]

That would be a question for one of our tech guys. You can reach them at (866)-881-4131

[@lsandman323]

Can you guys address the videos showing lots of play between the hub and the rotor! Kind of skeptical buying cpp parts now especially with your return policy and reviews.

[@CPPmaster]

Hmmm we are not sure what videos you are referencing, but you are welcome to give us a call and a sales rep can help out! (866)-882-4131

[@TheRealisticTake]

@@CPPmaster they are out there if you do a search. Your hubs have issues. We've replaced yours with C5 Timken sets due to quick failure.

[@Chris-zm7wh]

@@CPPmaster shocker....

[@darrelwright7343]

Jcturbo tech is a small you tuber that did a video on this topic of play in the barring or hub I would like to hear cpp take on this matter it's a serious matter of safety

[@ballisticjosh5770]

Will these ever be available for 4th gen fbodys

[@CPPmaster]

We haven't started developing parts for 4th gens yet...

[@falcon6936]

Will spindle work on a hedits mustang II?

[@CPPmaster]

That would be a better question for one of our sales reps. You can reach them at (866)-882-4131

[@dennisalstonZ06]

Will this work for a 71 pontiac Grand prix

[@CPPmaster]

If you have not already, we suggest giving us a call at (866)-882-4131 and a sales rep can answer that for you

[@jewtoob7406]

@@CPPmaster thx also needed this for my 69 cutlass ..

[@Jizzaldo]

Will you be making these for 59-64 Impalas? If so, will it have a drop spindle?

[@CPPmaster]

We do not have immediate plans for the '59-'64 fill-size GMs but if we do come out with them, it will likely include a 2-inch dropped version.

[@Jizzaldo]

@@CPPmaster awesome. I'll keep an eye out.

[@arniecann1133]

WhTs the length on the studs

[@CPPmaster]

You can give us a call at (866)-882-4131 and one of our sales reps can answer that for you

[@pedrofernando176]

👍👍

[@honcho714]

Don't buy cpp hubs , super low quality and dangerous .

[@Chris-zm7wh]

To all watching this just get the Spindle. Do not buy the kits the Hubs JUNK their Rotors are JUNK. NO QC AND POOR SERVICE. buy the Spindle the get good Hubs and Rotors

[@CPPmaster]

We are sorry to hear you feel that way! We check all of our products through stringent quality control and are always improving our parts. The C7-style hubs we are using in our kits these days are much stronger and more durable than some of the older hub designs GM used.