Video Demonstration of a Rear Drum to Disc Brake Conversion

In this video we demonstrate just how easy it is to convert the rear brakes from Drum to Disc using one of our Legend Series Disc Brake Conversion Kits

[@TheDeepDiveLLC]

I'm glad it's on the road. I did this in Forza before you started this project and now it's real! 😆

[@oleksandrsugar3867]

So simple? ) You produce the best conversion kits!

[@eagle11aa]

Very excellent sample of conversion kit within 3 minutes. I see the ?? Asked where not those of a mechanic. All parts where the if they looked closer at video. Thanks for demonstration.

[@codyfeatherstone3901]

You’re video was really useful thank 😊

[@alwazchafekar6615]

I have seen these first time. I like it these is very helpful for me 👍👍👍 Thanks sir

[@santos-sanchezharold2654]

Hi ! I have a 1991 Ford f150 pick up truck that I want to do this conversion too. Question will be. Regarding the safety break line at the rear tire. Is the safety break line will be 1) useful to be reinstall to the new calipers or 2) it will be eliminated ?

[@robertclymer6948]

Like the simplicity of the install, however, would like to see the new brake hose install. Did you use the old distribution block or change it out. Do we need new brake lines from the block to the caliper??? Thank you.

[@MasterPowerBrakes]

Sorry about the late reply Robert, but you would use the current hardlines that are within your system. We send you new brake hoses to go from the original lines to the caliper.

[@MinisterJokes]

@@MasterPowerBrakes do you recommend replacement of the master cylinder as well. Something that can push the new fluid to the caliper with more strength and durability?

[@face4682]

@@MinisterJokes I'm wanting to know the same thing, because I wanna switch to disc brakes in the rear of my 2013 Nissan Sentara.

[@ianshiner3880]

the bit i was looking for advice on was fitting and correctly adjusting the ebrake cables (which they dont supply and forget to tell you the standard ones wont work)

[@johnogo7886]

Will the 14 inch Mopar rims fit around those on a 8 3/4 rearend?

[@williamhamilton9364]

Awesome. I wonder....do you make a kit for 55 chevy rear end?

[@glennpitre2239]

Do you make this for a 2006 dodge stratus rear drum to disc conversion?

[@jarednows2]

you literally skipped a whole bunch of things you have to do. if only life was this easy. but a good video for simple minded people to buy your product. i give you that.

[@difsid569]

exactly.

[@latorgator23]

Lol, so the axles just slide right out?!

[@ricknick5318]

Why did the axle even have to be taken out I see no reason why everything's got a hole in it that seems to be big enough for it to slide right through and unnecessary step in my opinion.

[@ricknick5318]

I think taking the brake pads and the springs and all that stuff off is really that much really necessary I mean that's a given a simple person can even tell that once you remove all that stuff but that's all that's left is exactly what he did now if y'all are talking about all the shade tree mechanic crap like hitting it with torches and all that other stupid shit to break a boat loose here and there I don't know what to tell you because I've never had the resort to stupid shit usually a can of WD-40 does it

[@jorgepimentel4934]

@@ricknick5318you have yo remove the axels to be able to remove the drum backing plate

[@james6jewel]

I have a question will this fit on a 94 ford explorer with factory wheels

[@HonderdtachtigCC]

This work For 2013 vw Scirocco Dsg ?

[@carolynmclemore4306]

Did you use the same axle shaft?

[@elcuervito9009]

Where cam I buy all these parts/kit?

[@bsagreg]

How does the E brake work on this setup

[@dennisdougherty3212]

do you have a kit for a 2017 or 2018 Nissan Sentra S, or SV? If so, what is the price for a base kit ?

[@screwsnutsandbolts]

Excellent job !

[@kingcaddi44]

Nice! I appreciate you for keeping the lacs alive. U riding clean fam, salute from VA. I really like the sun roof u added. What year and vehicle did u take them out of?

[@myashamoore5239]

do these support 4x100 spacing?

[@jessecole2104]

What about the E-brake? How does that work with this kit?

[@wickedwilly9785]

a bit over simplified because it is a "sales pitch" missed parking brake work because you will need everything for that too, Brake line install and bleeding and axle seals.

[@101Volts]

And also, a New Master Cylinder. I'm not the most sure why, myself, but I think it's because the system will give too much or too little braking pressure to the rear discs if you're using a master cylinder that was for Discs on Front and Drums on Rear.

[@Captn_Cor]

@@101Volts also the fact that he started at the part where you are pulling axle rods out.. a lot of work to get to that point alone..

[@jonathangarzon2798]

What about the brake lines ?

[@cuzz63]

You can see the broken end of the old brake line. You will need to replace it or connect a flexible fitting to the end. Needs to be a double flare on the metal end.

[@ele_112]

billt460 exactly why i’m sceptical of making a purchase since they don’t make the complete install

[@Ry_Pox]

@@ele_112 Buy it and figure it out building brake lines isnt too awfully hard. Usually they include a braded cable that hooks to the brake line but if they dont do it yourself

[@torreslarry6837]

@@cuzz63 yea huh i"m like connect that snipped-off brake line " your not done,,

[@BabyxBandit]

Do you carry conversion kits for the 1999 Suzuki Grand Vitara?

[@proreapertv1432]

What about the metering device on the pressure differential switch

[@kyngdre7882]

That's looks easy! But I knw I'm going to have mad complications! Great video!

[@MasterPowerBrakes]

Thank you!

[@dogsense3773]

I did the rear brake discs upgrade on my 1967 it was hell to get the brakes to work right car did not stop any better I ended up replacing everything, electric vac motor helped a lot but at 10,000miles the seals in pump went out, ps emergency brake doesn't work a sh== l was a mechanic for years too! This car is a cougar

[@russellfoote2470]

where can i get a disc set up kit for my 55 -64 early gm rear third member ? thanks

[@madmechanic9497]

hello, would this work on a landrover series 2a and 3?

[@robertwark1948]

Would this kit be ok for a Ford ecosport 2022 I am in the UK

[@MrAerobill]

, I have DANA 60 , it has a clip/retainer on the bearing , does this have to come off in order to put the spacer on first?

[@folloczah056]

Is this still available am in South Africa and will like to get this for my KE30

[@kawaisit3086]

What about the parking brake? Do you have a kit for a 1999 Toyota Sienna?

[@candoallthings6748]

Did you find something?

[@luiseliezar4774]

Qué tipo de frenos de disco me recomienda para una Ford F100 19 63

[@pedrolujan3171]

Would that work on a 2000 Dodge Ram with 2001 rear 1500 V8 5.9 I was just wondering if that would work as well I do not like doing drum brakes so I wanna switch mine over is it possible

[@mjochoa2007]

Do you have available for k1500 95 ext c??

[@justinloper2498]

Would this work on a 4 lug?

[@anthonyalise8254]

What about the axel seal? Do you supply new ones 🤔? Is there a step you left out regarding the axel removal and instalation?🤔 I know every car is different but I think the axel removal and installation needs to be mentioned in more detail. 😳

[@stevenbean9706]

never took my axles out cut a slot in the backing plate with a plasma cutter and it slid right in makes things a lot easier if you need to completely disassemble

[@pgotgbodys4585]

What rear end is that off of?

[@richardcamacho8263]

Do you make these conversations for 89 Chevy Caprice if so could you provide the info thank you ?

[@grandaddyl7351]

Will this work on a gm 7.5 10 bolt or 8.8 Ford Mustang

[@user-dw1sd1ko3k]

What year rear end is that

[@user-lq9oj7xm9f]

May I know the kit that u used

[@Yourengineeringstandpt]

I'm looking to change a toyota corolla LE 1.8 lter 2012 is this possible and what would the cost of this endeavor be could you do a video on this I would really appreciate any insight you may have for this procedure thank you again for all the great tips you provide for us keep up the great work.....

[@azrieltheangel2405]

You have a kit for an 04 frontier?

[@melviorlmnpml9llocruz381]

Do you have for montero sport

[@dynamicdopamine]

I just subscribed, is there anyway I could talk to one of you one-on-one about my situation that I've got going on with my car?

[@AlfredoLopez-nk8id]

Is it compatible for a Dodge RAM 99?

[@dimetrieharris8713]

Hey great video but can you help me out please I have my 1995 toyota corolla and I want to convert to rear end dis where can I find a kit for that

[@adrianpeters9158]

Where can I get a kit like this to buy

[@knighthawk1784]

Take a drink every time he says UH

[@nevermind8694]

What about the wheel sensor?

[@edwardedgar9577]

Hello, sorry I have a 1992 4.9 L Ford F-150 6 inline pickup truck, rear gawr 5450 LB and I want to convert it from drum brakes to disc brakes. Could you tell me which are the ideal brake discs to use in this truck, please. Thanks.

[@mdnvisualz]

2005 mitsubishi eclipse spyder gs :rear conversion kit?

[@angelcruz2124]

IS THERE A REAR CONVERTION DISC KIT FOR NISSAN FRONTIER 2004 XE

[@thoughtswordactionbeta6959]

Do you need to replace master cylinder and proportioning valve?

[@hueroski]

Yes

[@clouseau3779]

Hello, Do you have a conversion kit for a K20 1976?

[@benidect5955]

I have an XUV Isuzu Crosswind 2003 here in Philippines. I want to ask if this type is applicable to install on my vehicle?

[@rickylau7458]

very useful lesson

[@andrewrobertson855]

*useless

[@fernandobalderrama9166]

You have kit for nissan pick up 4x4 1996?

[@saulrodriguez6211]

How to convert to toyota corolla AE101 rear caliper?

[@juanmanuelcruz5074]

Where can I buy disks break kits for my 1981 el camino

[@gabakusa]

where is the link to buy the kit?

[@RidleyPhantom]

Does this only work for vehicles with rear axles? Do you have this kit for front wheel drive vehicles?

[@omegarugal9283]

FWD already have disks

[@pepperjack7870]

Not in the rear. A lot of em have drum brakes.

[@rowandbros868]

What year of truck are you working on?

[@impalachris7261]

Will this kit fit a 62 Impala and can I have 14 inch rims back on it. I got to find a kit this week

[@MasterPowerBrakes]

We do offer the new style of rear disc brake conversion kit for the Impala. As far as 14" wheels, I would recommend taking our Wheel Fitment Template and trying it inside of your wheels to see. Some might work. Some might not. Here is a link to your application where you will find the template and instructions on using them: www.mpbrakes.com/rear-brake-conversion-kit/1962-chevrolet-impala-legend-series-rear.asp?catid=D821F458ED7B4C40AE406C65CCD91D34

[@cjscrambler737]

will original 15" wheels fit over the new conversion, or will i need to move up in rim size?

[@MasterPowerBrakes]

Our kits will fit MOST 15 inch stock wheels. We do not guarantee anything only because we do not specialize in wheels. We do however have wheel fitment templates for all of our kits.. If you are having trouble downloading the templates off of our website, feel free to contact us and we can email you the template to see if your wheel will work!

[@prawny12009]

Does your spacer overlap the bearing outer race? it doesn't look like it The original back plate is what secures the bearing, if the new spacer doesn't overlap then the bearing and half shaft will be free to move in and out of the axle housing slightly.

[@marsv7777]

Good point !!! But it's not the backing plate that holds the bearing, it would be the retaining plate on the axle , in this video it doesn't have it fitted, I wonder if the adapter plate clears that retainer plate as sometimes it has a bulge to clear the bearing.

[@krzaku1983]

Hi guys. I'm looking for conversation kit for nissan navara np300 2018. Can you recommend something please?

[@NonnoGregorio]

I have a B body GM 8.5 axle 5 x 5 bolt pattern. Which kit would I use??

[@ebritanica]

)

[@Kurnacopia]

But do you have this for a 1978 Chevy Scottsdale 4x4?

[@ethansav0892]

I got a 1959 Chrysler and the drumb brakes are awful would this kit work?

[@hueroski]

No parking brake adjustment needed?

[@kirinyahassan7964]

can it work for land Rover 110

[@andresvilar4921]

Hola soy de argentina queria saber si ese kit se le puede ponera una camioneta ford 1988 y que valor tendria con el envio a mi pais

[@MrJiadi1]

Where can I buy disks break kits for my ford ranger 1998

[@TerryG.74fj40]

Will your rear disc brake assembly adapt to a 1974 fj40 land cruiser minus the e-brake….will be using stock e-brake. Thanks for the info.

[@MasterPowerBrakes]

No, it most likely will not.

[@philh9238]

Do you have a kit for a 1972 Dodge Dart custom 318 8 3/4 rear end

[@user-kq6ed3mh7j]

what about the parking brakes?

[@adspeaklimited5959]

Hey, How do I change my rear Mercedes G, Wagon Drum braking system to Disk system?

[@filo7998]

Hy can you tell me the price for this work to rear axle of Toyota hzj 78 year 2000? Thanks Filippo

[@josetirado6080]

can i do this conversion on a volvo amazon 122 year 1995 ?

[@vallroadtrucking5177]

can we buy an axle shaft w/5 lug nuts?

[@only_rajee6669]

What's the website so I can buy a kit

[@alamsyahandin99]

Could you explain how to change rear drum break to disk Jeep Cherokee XJ 98 tdi 2,5

[@arturos.l.2248]

You don’t need to. You need drum brakes in the front and rear because drum brakes are the best

[@DreadHeadChannel]

05 Camry??

[@The513Warning]

What if you not only want to switch to disc brakes in the rear, but also convert the lugs from 4 to 5?

[@stealthcamo712]

Next axel shaft, I think. The lugs are attached on that part. So, 1 new shaft per wheel you wish to convert.

[@MrJamiewahl]

How's the E brake work with that setup? There was so much overlooked.

[@Inferno1170]

You are correct, this set up has no emergency brake. There needs to be either a mini drum brake inside the rotor or they make them clamp the outside caliper. This set up is missing both of those.

[@jaishetty4469]

what about the parking brake ?

[@loulou810]

Any Kit for Suzuki/Geo Sidekick/Trackers? Highly Interested

[@quindariusderamus1022]

Me also ill like to get those kits myself for my 2002 Suzuki xl.7

[@mbongenitshuma982]

How about the hand brake how do you install it after all that…?

[@billbullers9559]

How can I order this kit for my 89 f150? Thanks in advance

[@phillipsydnor1583]

I have a caprice 89 9c1 do u have a conversion kit for my rear pls tell me you do

[@PolecatCreekGarage]

google is your friend

[@mikeilikeit9685]

ohh! Aiye man, that is the best ever where can I buy it?

[@arturo052685]

Will this work for a 2001 dodge ram 2500 rear brake conversion from drum?

[@MasterPowerBrakes]

Unfortunately, we don't make a kit for your application at this time.

[@8000RPM.]

What about Brake bias? (Won't the rear end brakes lock up too soon?)

[@MasterPowerBrakes]

It won't. However, it is recommended that a disc/disc combination valve or an adjustable proportioning valve be installed in the rear line.

[@renehenriquez5607]

How is that kit

[@jpalacess4735]

but rear break disk have a small shoe brake inside the disk how do i isntall those for the emergency brake