Coyote swap how to: 7,000+ RPM pulls/dyno/walk around 1990 GT Coyote Swap

[@dbfire6787]

One of the best coyote swap channels on youtube.

[@keithpetersen560]

That car looks great. For a N/A motor that thing rips gears. What a great daily, dependable fast car. That is something I would like versus shelling out a lot for a newer mustang. Great review.

[@BE60IFR]

Your swaps look OEM. Bro, you’ve elevated your craft to the next level! There are a lot of butchers out there with full-on shops and they don’t even come close to the cleanliness and complexity of your Coyote swaps! Get that $$$, Brother!

[@robert23497]

Excellent work bro. Love that you kept streetability in mind on suspension on a car that just plays from traffic light to traffic light. I would DEFINITELY move the battery to the trunk on the passenger side and I'd go with optima but for a budget.......you crushed it. Thanks for the quality work Alan!!!!!!!

[@gr8tfoxes617]

Ya keep them coming Alan. Your videos have been a go to source for no BS ways to make things work. Always clean work.

[@SamM-qk9xo]

Respect. This guy seems to do good work and does it himself. I wish he had a cameraman to make vids everytime he worked in the garage making these vids.

[@johnnyarmstrong7013]

Great to see you back. Appreciate the coyote swap content. Keep it coming man.

[@andyfreitas5651]

I like the attention to detail with the wheel liners…. I see you bro!

[@NCpilot79]

Top notch work, as usual. Thanks for posting- best mustang channel on KZbin.

[@seeunow44]

Love the content and all the details….Specifics as described help us all ….in progress with mine…MMS K-member with coil over(street valving ) hope it’s not “too harsh” as you mentioned …. Please keep them coming

[@DragSlicks]

I want a coyote swapped Fox so bad the idea of the coyote in fox is just dope as fuck and you couldn’t go wrong with a beautiful coyote

[@DragSlicks]

God damn that coyote sounds beautiful in the Foxbody I love it👌

[@chosenchild8416]

Absolutely beautiful. This is my dream Foxbody.

[@Raisen476]

Enjoy your videos and you do great work! 👍🐺

[@no1but24]

Like how you used a factory air box pulling cold air from the front of the car instead of just a open K&N under the hood.

[@clarkbubar8687]

I love that Blue Convertible!!

[@EJ257IHI]

That's a really nice clean setup, I really like those wheels.

[@charlesjones3886]

Keep up the good work bro. I'm loving it. ❤

[@jermaine5852]

Here's to drop a like, I will watch this later as soon as I get out of this d*** traffic.

[@pcpalan]

Eyes on the road!

[@Wowzers2006]

It's always good to more of your content!

[@ronniehaley729]

Beautiful car! Looks identical to the one I had in high school, '1998'

[@tomjacka7401]

thats a nice car

[@devinwilliams9058]

The mufflers that big of a secret🤔🤝 if it sound good share

[@x04svtx]

He be gatekeeping, than complain that no one helped him lmao

[@A2J_Tim]

that thing rips pretty good, looks like it has alot more jam than the original 5.0 with a paxton.

[@G.Harley.Davidson]

Would a Coyote ever be able to make the whistle/drone of the 5.0 pushrod?

[@MRSOTELO408]

Badass Video Alan. Awesome work

[@YoBoyWoohoo]

BEST WORK BEST DEALS !!

[@characterdevelopment2361]

Was there anything special you had todo to get the 3650 to fit

[@MrTesedgar]

Very nice 👌. How much would u charger to stroke my 302 foxbody 5 speed . Trying to make anything from 300 to 400hp or any ideas would appreciate am base here in Los Angeles. Thanks

[@GTNBY2]

I haven't looked in a while, but could you make a playlist of a start to finish swap? My 90gt REALLY NEEDS A COYOTE!!!!!

[@deadz0ne84]

Always good content and clean work.

[@bobbylight5686]

Dude. Thing looks sick and fast as F!

[@mrprfct7069]

Are you using ford control pack or what the recycler gave you?

[@mikeygarcia2730]

Great channel so you can run a returnless system with corvette filter even though control packs state return style fuel system is required? Thats pretty awesome nice and simple, less lines to run

[@stephenfickjr3053]

Any videos on Dakota digital cluster install

[@chrisedwards2624]

Love it. What group battery is that? 56?

[@angelroman7044]

Dash works perfect

[@mattbo2003]

Clean AF!!!

[@BengyM]

Great video! What headers did you use with the AJE K-Member?

[@pcpalan]

Bbk

[@RichMindedRacing]

Watup bro I love your channel I’m doing a gen3 10r80 swap on my fox and need help figuring out the fuel system I’m running a single turbo on it and wanna run a return style fuel system you got any suggestions for me? And have you ever installed a 2020 dash in a fox? I also have that and was wanting some pointers

[@itspoffy]

Wow. Burning in 3rd and maybe 4th. Thats sick.

[@brucesvt96]

Love this channel love the swaps. Keeps me dreaming about my 96 cobra getting a gen 1(based on my budget lol)

[@midnight347]

Nothing wrong with a gen 1. With a cj and cams they can do 500 to the wheels on e85 that is a ton of power in an older lighter mustang

[@Voodoo_raskal]

Awesome!! Bought a 88 gt to do the same thing but once the prices hit me I decide to go ls haha😅ik I’ll prob get hate but it was more reliable and more power than the stock 302 in it, would like to coyote swap one day tho if I don’t decide to go drag build

[@dreamchasnlin]

You should do a “how much it cost” vid

[@jasonpeters9478]

What exhaust manifolds did you use? I have an Aje k-member install.

[@keithrosier572]

Great work. Keep up the great info..

[@siwash99]

Can’t wait to get one of these

[@Cuete590]

How is going boss I love the ride I’m starting to get into mustangs lately I’ve always wanted one of these.. keep up the good work 💪🐎

[@pcpalan]

Welcome to the club! Glad to have ya

[@40istowin]

Just found this channel love it. Trying to figure it out to coyote swap my fox body

[@pcpalan]

Welcome to the channel. Drop some comments, few likes, maybe sub, watch some vids.. dont be shy now

[@40istowin]

Just subscribed 👍

[@anthonylaudano9435]

​@pcpalan MAN I LOVE FOXBODYS AND I KNOW HOW THEY RUN LOL I HAVE A RED 87 MUSTANG GT WITH T TOPS AND MY VIBRANT RED 93 COBRA AND THEY JUST HAVE EXHAUST AND THEY RUN NICE BUT I COULDN'T EVEN IMAGINE A FOXBODY WITH 6 700HP LOL THEY GOTTA BE SCARY. LOL I ALSO HAVE 2 SUPER SNAKES AND MY COUPE IS OVER 900HP AND HONESTLY THE CAR SCARES ME LOL.

[@nothanks81]

You tried those speed engineering headers for a swap yet?

[@dforest8539]

What AC dryer are you using?

[@GSPMotorsports]

Do u use f150 cams and a gen 2 control pack and just have it tuned for those cams?

[@sixoid4104]

I’m big on keeping foxbodies pushrod, coyote swaps aren’t really my thing but cool to see people putting the effort in.

[@midnight347]

Have you driven dohc fords before or have you always just had pushrods? They drive really smooth and Rev smooth they really are great engines.

[@sixoid4104]

@@midnight347 yes I have, I also work at a mustang shop and have built plenty of both. Coyotes are cool and fantastic engines, in my opinion the best on the market. BUT I personally like the sound and simplicity of a pushrod motor, it’s old school and badass. Coyotes don’t sound that good to me

[@pcpalan]

If you had a Foxbody roller with no engine or transmission, and I said “Bring me your roller and you can pick between a stock SBF/T5 or a Coyote/T56 and It won’t cost you a single dollar.” You are still going to pick the stock SBF?

[@sixoid4104]

@@pcpalan nobody said stock lol. I’m picking a pushrod anyway of the week, it’s what I prefer.

[@FordsRule351]

What radiator and fan setup is that? Starting my GEN 3 swap here in a few weeks.

[@thruitallauto2538]

Just found ya channel been watching all weekend, great work man, I’m on my last video, oh an I subscribed too

[@ford351user]

Question. What kind of radiator over flow tank are you using ?

[@gmtech9884]

Beast car… I’m doing a swap how does the vets delete work on this car???? I’m doing a swap trying to figure that out.

[@deanb949]

It's VATS, you get a tuner to delete it from the PCM

[@pnw_pharmer3990]

Good video once again bro. Could have thrown these coyote swaps off with my Terminator swap one bro. Not the end of the world thow lol. Looks dam good bro.

[@02dannymex]

Yoo!!! You have termi swapped fox?

[@KM-uw4ez]

You do nice work bro. Very nice.

[@hilariomendez9111]

Can you smog the vehicle like this with all this changes

[@justa5.0]

I have a 93 coupe and a coyote with trans with all do I need to do the swap?

[@rodsfrenchies]

Yo brother I wanted to ask if you would be down to do a swap on a notchback I just got I own a 2013 coyote to get all the parts from

[@G.Harley.Davidson]

I’m afraid I’d lose control of the Foxbody with that coyote power, or at least that’s what I’m trying to convince myself.

[@dees2kids981]

Where are you located?

[@fahoooooooooooooood1]

Did you do any modifications to the K-member to adapt the Coyote? What motor mounts you have on

[@zachhunter5702]

AJE has specific motor mounts that work with their K members. Basically, you can use the same K member and just buy the mounts to fit whatever motor you want whether windsor, mod, chevy or 460

[@jameskocks4734]

i have dreamed of getting a fox and doing a coyote swap. wouldnt an f150 coyote be a lot cheaper?

[@midnight347]

They're a little cheaper but not as much as you'd think.

[@gerryj8839]

Love it! BTW, what's the part number for the mufflers- asking for a friend... LOL

[@pcpalan]

These are magnaflows I believe. Not the bullet style ones

[@JohnSmith-ey1rd]

@@pcpalan I’m in Frisco and need a swap how do I contact you

[@BE60IFR]

Lol@ Don’t ask me what mufflers I run 😂 But, they sound 🔥 🔥 🔥 🔥!!

[@x04svtx]

Hes a gatekeeper lmao. Says he helps people but wont tell exhuast, and no, i do not want the setup. Just instantly noticed same thing

[@rafamiranda4302]

How much dose it run you to build something like that’s?

[@brianclifford5881]

I want to see more of that 87 convertible

[@Thedoctor4x4]

What about the driveshaft? For the 6r80 Any budget option?

[@pcpalan]

No

[@dewaynehall7104]

Nice ride man if I didn't own a 2011 coyote mustang I might would consider coyote swapping my 90 lx hatchback

[@urch1281]

Wish I had money 😢… I’d go straight to you for a swap. Keep up the great work bud!!

[@JESSEPAVON]

I wanna do this swap too, i fix wrecked cars, how hard can it be?

[@rafelcons4246]

What would you charge for a swap. If I have both the fox, and the 2013 gt running donor car?

[@moessti1583]

love you're swaps man. where are you located at? maybe you can help me complete my swap

[@JESSEPAVON]

I wanna do this swap, where are you struggling? I think it’s some we can figure out.

[@pcpalan]

Northern California

[@LynnTwinCustoms513]

That coyote rpm! Sounds good

[@agemontana5072]

COYOTE SWAP G.O.A.T 🐐🔥 🫡

[@sendog1020]

Bad azz coyote. Is this a tremec 5 speed ?

[@pcpalan]

Yes. This car has a built 3650 transmission.

[@BengyM]

I see you don’t respond to comments. If you respond to my question I’ll subscribe. What headers did you go with with the AJE K-member?

[@pcpalan]

I’d say I respond to about 75% of the questions i get. I don’t have notifications turned on so occasionally I scroll through comments. I tend to scroll past the questions that require minimal effort and research or have already been addressed and answered in numerous videos or comments. To answer your question, it would depend on your transmission. If you are running any type of manual transmission then BBK headers are my go to. Always in stock, decent craftsmanship, and a fair price. You can keep your sub though , I’m not a “youtube influencer” hurting for subscribers. Thanks though. Good luck with your project

[@derekval9722]

I just started watching your videos! Do you offer this work?

[@pcpalan]

Ya

[@shawngoff8290]

How much you charge to do a coyote swap?

[@ej8883]

How much do you charge for a coyote swap bro?

[@artoriusfrye3183]

My car

[@98saleen]

Nice job. New subscriber.

[@venomfastback]

Man, great work. I am fixing to start swapping my 86 SVO.

[@JESSEPAVON]

I wanna do this swap too

[@x04svtx]

What are you doing with stock svo motor and tranny? Id buy if you are in cali

[@venomfastback]

@@x04svtx that stinks, I'm in Texas. I'm going to sell everything that I pulled from the car. Esslinger bottom end kit with big valve head. Ported head, with roller cam and gutted upper intake. Also ported lower. Bob's log exhaust and upgraded turbo. Lots of good stuff.

[@x04svtx]

@@venomfastback well, if for some crazy reason i go out there or vice versa lmk! Im veryyyy interested. Looking to have fun little turbo car

[@x04svtx]

@@venomfastback i have a stock 93 2.3

[@timc2745]

That's the way to do it.

[@davidclark5283]

I've got a 2017 gt w 2018 Intake, cold air, borla catback. 22000 org miles. Body is total but drive train is 100% good. I need to sell drive train or get a body and do what yall did........

[@pcpalan]

I’ll take it. Send me an email or leave me your phone number on a comment.

[@04titian]

How’s it going, been watching all your vids. How can I get a swap done by you?

[@JESSEPAVON]

I wanna do this swap, don’t you think we can figure it out? I’m sure it’s harder than we think but I’m sure we can do it.

[@mica9977]

Hey its Tuesday put will take it ! How give us another 15min next Monday.

[@gerardoortiz7455]

You are the best good video

[@bodieb1233]

Great video. Clean. Makes me think about my car ! Could be interesting ! ???

[@seansadventures-flyingtrav7901]

That is awesome

[@kevinx1829]

Love it...🔥🔥🔥

[@gsxroyce256]

I’ve noticed the best car builders have ADHD lol

[@deanb949]

I was about to puke with all that camera dancing at the end 😮

[@ernest345]

Nice Job.

[@JasonMartinez-wv1gd]

Keep it up.

[@chuxsvt]

What mufflers are you running lol

[@pcpalan]

I can’t recall which ones i ran on this one, but I usually only run 2 different styles. It’s like a magnaflow style flow straight thru muffler. It’s doesn’t have baffles or anything. Check out one of my other videos where you can see underneath the choir and it’ll give you an idea. Again I’m not too sure which ones were on this car though sorry.

[@shawngoff8290]

Love your builds!! Wish I could get you to do mine for me

[@JESSEPAVON]

I’m dead set on a fox body gt, but would have to have a coyote engine. How hard can it be to swap, i fix wrecked cars and just about everything. You and i should figure it out together haha

[@shawngoff8290]

@@JESSEPAVON you can bet your last dollar ima figure it out Grinder Torch welder everything fits lol jk but ima start my build soon for my wife to daily

[@Json.-]

Definitely nice

[@bamaboi1570]

Wassup bro coyote swap a new edge👍