You foxbody guys tired of seeing LS swaps might get a kick out of this. I swapped a coyote in a 78 camaro. Ran low 10's with 5 psi of boost and some good air. Turned the boost up to 10 but air is crap right now but I think it will crack a 9 soon. Got some clips on my channel including a pass from a few weeks ago.
@midnight34710 ай бұрын
Cool I honestly think gm should have gm Ford should have Ford but it is funny since there are so many braindead people doing ls swaps following each other like blind sheep lol. That is very cool.
@mustangandfrankenstein9 ай бұрын
makes true blues sick ..its a halfbreed and shouldn't be allowed on any track and isn't at my track..im sure ill hear alot of hate but i just dont cars what anyone thinks or says . just my opinion and as I'm sure these folks have theirs...
@mid-tnsupply39147 ай бұрын
@@mustangandfrankensteinwe get it, you lead a boring life bruh.
@mustangandfrankenstein7 ай бұрын
@@mid-tnsupply3914 maybe but im true to my brand and not a half breed like most of you confused shade trees
@AUTOMOBILZ2 ай бұрын
@@midnight347it’s not about people being brain dead, the main reason people do LS swaps is because their affordable, reliable and the ease of use………it’s a no brainer. GM made a great engine and it’s cheap, of course the masses are gonna jump on that wagon.
@gerryj8839 Жыл бұрын
Reversing an LS swap is like doing an exorcism. Good on you fellas for doing the Devine work!
@midnight34710 ай бұрын
Lol
@OEMPlus Жыл бұрын
after going from my 4v cobra to a gen3 GT i realized this engine is exactly what i always wanted. they just pull alllll the way to redline. i know its not a special car but man these motors are absolutely awesome.
@midnight34710 ай бұрын
You should try that driveline in your old cobra lol. Even better since it's more raw and lighter it will feel and actually BE faster.
@OEMPlus10 ай бұрын
@@midnight347 nah, too much hassle not enough reward and I sold the car.
@dailylife3975 Жыл бұрын
Hard work pays off brother you got some nice whips
@timbrown26375 ай бұрын
I am going to be doing a 65 Galaxie in the next year, do you have any ideas about motor mounts to fit where an FE was? Also header flanges since I will have to build custom headers.
@LeachimSagrav333 Жыл бұрын
A lot of money...definitely a lot of money 😮
@VS666 Жыл бұрын
hey i know it's late but huge congratz on the gt500, i didnt realize people were twin turboing those mfkrs already goddamn! that clip of you with the new exhaust getting into it at the end of the video made my spine tingle, those shifts combined with the turbo noises and corsa were earth shattering!
@kriswest4808 Жыл бұрын
Would love to see more 94-98 content. Great video as always! Keep grinding!
@MustangLifestyleTV Жыл бұрын
If I’m being totally honest sn95 is just not my cup of tea. 99-04 has always been my go to. Very similar cars but I’d rather build a 99-04 car over a sn
@midnight34710 ай бұрын
@MustangLifestyleTV a new edge car is an sn95 too sn95 went from 94-04 people just say new edge to differentiate...the early cars are every bit as good when they're done right they can be sick
@meanf1502 Жыл бұрын
Who painted that block an do you have a paint code love my coyote swapped 90 fox
@FordBossMe Жыл бұрын
Actually there's a few of us lately that have been working with dorman more and more and they've been making much better quality stuff SLOWLY...they've been really starting to lean on content creators like myself and Rain Man Ray and Eric from South Main Auto to critique their products so they can make it better
@timweb1510 Жыл бұрын
@FordBossMe what’s good fanboy 👌
@decorativeironplus464425 күн бұрын
i have a question do you know where i can get dimensional numbers for a sbf vs a coyote length width etc i have an old thunderbird i set uo with a windsor stroker motor with a fox body k member and thinking of going to a coyote power train . if i can get some numbers i can get an idea how much i will need to mod it to fit thanks Bill in Nevada
@95Sn9511 ай бұрын
Is that car ford Lazer red or something else. And what color is that powder coat? I have a Lazer red 95 GT and that looks killer. The required parts for the swap makes my head spin, makes me feel like the tech of modding my 5.0ho is rubbing 2 rocks together. I wouldn't even entertain the idea of this unless I had a dedicated bay with no time limit and at least 10k, 15k be nice available for it. If I pulled it off for 5k great but if I went sideways I could afford it. So I'll stick with my plans of and fresh .030 bore n pistons set of 185 enforcers and street cam, only thing I'm stressing is the possibility of the stock computer or intergrating a stand alone into factory wiring without buying that $900 integration box for mega squirt and the last of the quarter horse kits are even $500... But that is all I guess in but the moates closed and sold off their stock to core tuning so when they're gone I guess they're gone? I'm a carb guy so this world is new to me but I want to keep my car somewhat original not hacked up and carb swapped so on, makes me appreciate my older vehicals being able to just spin a distributor and turning a couple screws.
@StangRacingProduc5 ай бұрын
What powder coat color is on this front cover and v cover? Great Video BTW
@tturi2 Жыл бұрын
would it be possible for you to a ford falcon swap video? the 1989-2014 have the same strut towers but different subframes
@SkylineBNR34 Жыл бұрын
I would love to do a Coyote Swap on a New Edge personally. Too bad I don't have the space to do one currently.
@MustangLifestyleTV Жыл бұрын
I highly recommend it. I’ve been very happy with all of the coyote setups I have done
@SkylineBNR34 Жыл бұрын
@@MustangLifestyleTV I've got a 2019 PP2, lowered on full BMR links, car currently, kinda want to find a tr3160 from a Mach 1 and swap the tremec into it though. Or just get a Ben Calimer Build? What do you think?
@michaelkennedy2528 Жыл бұрын
I will getting from you at somepoint soon all the stuff I need to Coyote swap my 2007 197. I have the 3650 trans I would like to keep but would need pretty much everything else. I had the Vortech V3 HO kit on the 4.6 3V, I would like to run that as well at somepoint on the Coyote. Maybe you can make a list on your website to help order what you do have to sell.
@lancecpldave3 ай бұрын
Idk homie I wanted to do this to my 66 but quite a few people said it cost them around 15k to do it. You can get a 530hp 302 crate engine from Ford for like 15k seems like a cooler option maybe
@paulhudgins5120 Жыл бұрын
Always enjoy the coyote swaps, really enjoying the New Edge content the most, but enjoying it all s550, foxbody, Sn95, just no Mustang II crap, as long blue oval it's all good.
@Steven-cs2rj11 ай бұрын
Can this kit, QA1 Level 2 Handling Suspension Kits HK22-FMM1 and k-member be used to swap a Gen3 coyote in a 1983 foxbody?
@deadz0ne84 Жыл бұрын
Have you seen anyone cut or modify the stock coyote headers to work with the swap? Asking as a Californian who wants to swap without cutting the body up.
@oslandhern5698 Жыл бұрын
By the way you have the most beautiful mustangs the only one you missing it's the GT350 other then that good for you If you loveto do that specially for living well lucky for you and also more power to you...
@aymanlockhartable9 ай бұрын
Can I find information Gen3 Ford Expedition coyote swap?
@CrowdKillerSN959 ай бұрын
What was the total cost in parts for the predator blower?
@jankycustoms6089 Жыл бұрын
How hard would it be to swap my Silverado got my hands on a coyote
@Reaper-ef9ht Жыл бұрын
You guys do coyote swaps for 2005 F350 4x4’s can it be done?
@sammyvices254710 ай бұрын
I got a full harness out of a 13 mustang, is trying to go through the harness and figuring out what I need and don’t need too much of a pain to deal with? Is the PBH harness really worth the $2000
@yust1more6 ай бұрын
Drifting was cool like 15 yrs ago. You can see all you want at your local intersection 😊
@seanfaulk864110 ай бұрын
Interested in a price for you to swap my 86 hatchback t top car.
@alexlambert5830 Жыл бұрын
Would you recommend running chassis braces on it?
@AlejandroMolina-k8h11 ай бұрын
Hi my name oeste Alex l have 5.0 fox body mustang l wan to put super charge o twin todo
@billlear5607 Жыл бұрын
That new maid service you hired was well worth the money . Shop really looking good and organized . LoL
@keiranay8343 Жыл бұрын
Is there anyone in northern California that does this sort of swap (entire swap) with a gen 3 coyote or a 03/04 terminator block.
@MrAguilar7510 ай бұрын
Tons of great info, thanks..
@carculturenation2166 Жыл бұрын
had the same centerforce clutch on my 1990 fox. THE CLUTCH TOOK ONE HELL OF A BEATING
@TheJMan1K Жыл бұрын
How was the pedal feel?
@devinwilliams9058 Жыл бұрын
@mustanglifestyle I got a s550 I have a question for you. so do I need to reprogram the computer if I take the drive train out and swap it into a foxbody? Because I always loved the foxbody I’ve had two and want another one. But wanna swap MY coyote from my new car into it. Thanks in advance.
@biggdogg3056 ай бұрын
Got an F-150 with a gen 1 coyote I’m just going to yank everything from, don’t feel like spending $10K-$15K to swap out my 351W
@teddyjohns739110 ай бұрын
Doing a swap into my 2010!!gonna be fun…yall know if a rear end from a 2015. Would mount up in a 2010??????¿¿
@andrewslagle19745 ай бұрын
No the 2010 is not IRS!
@k209099 ай бұрын
Can I run the automatic transmission?
@BB-kr7ep Жыл бұрын
I needed this video. Thanks for the info!
@imercman7985 Жыл бұрын
Thank you for the coyote swap content. Doing this on my new edge soon
@UntamedNLeasheD Жыл бұрын
if you wanted to change your plugs do you have to drop the motor?
@MustangLifestyleTV Жыл бұрын
No it is a simple task to replace plugs. Easy access
@lissandrofernandez8750 Жыл бұрын
So how much does it cost total for a complete swap MT82 Gen1?.
@midnight3478 ай бұрын
I think it can be done for 10k pretty easily if you're smart and buy the stuff needed from them. It can be alot more it depends what kind of build you want. Do you just wanna throw a stock gen 1 in there and roll? Do you wanna upgrade to a better manifold or cams or whatever? Are you gonna boost it? A basic swap could be done for 10k imo but it can be done more it less it depends on the overall level of build you wanna do. If you're doing like me and doing a ported gen 2 cj and cams with a new tkx 5 speed it is gonna cost a decent bit I might have 15k into mine but that's OK with me it's worth it for what I'll have which is over 500 rwhp na in a 3000 lbs 97 cobra. It's gonna be a corner carver and Rev to 8000+ this is why I can't use my stock t45 it's not gonna like those rpms. I'm gonna run a real nice rst twin disc too even though there are cheaper options. The ported gen 2 cj and cams is another few grand but it'll be crazy fast for na I want to keep it na because of its intended purpose it's gonna be a nasty corner carving drivers car that's extremely enjoyable to drive. It's not gonna be cheap but it gonna be done right. I could do a basic gen 1 mt82 for 10k easily I'd say. I'm not only upgrading alot more but going gen 2 instead of gen 1 mostly for the better high rpm capability. My build is well thought out and I know exactly what I want before hand (ideal)
@michaelkennedy2528 Жыл бұрын
My Gen 1 came with a MT82, I would like to use it due to the amount of highway driving I do. That being said, the original was a TR3650 with the 4.6. If I want to use the MT82, what are you doing to make the driveshaft work? The length is about 4 inches longer overall and the carrier bearing for the 2 piece is slightly off from the original. Thanks.
@midnight3477 ай бұрын
In an s197 you'd think an 11-14 manual driveshaft would work once you're running the mt82 in the car it's the same thing at that point.
@eddie_n_jackievillanueva9377 Жыл бұрын
I currently live in NY-Long Island and I don't think you folks are close by to my location. Do you know a location near me or how to search for one? Thanks
@MustangLifestyleTV Жыл бұрын
Search for an engine?
@05Yote Жыл бұрын
Thanks for all the info, awesome 👏🏼
@Soggypotato716 Жыл бұрын
Andrew, is it possible/street legal to put gen II coyote heads into a gen III? I really just want to swap the valve covers because the gen III are ugly and the II’s are just gorgeous.
@MustangLifestyleTV Жыл бұрын
That is not an easy / beneficial swap. You would basically need to completely gen 2 swap everything - wiring, ecu, heads, etc
@michealwriska2920 Жыл бұрын
Hey Andrew do you need a harness for the trans if it’s a stick my dad passed away an left me his fox body I’ve been thinking about doing a swap 347 out an the coyote in
@MustangLifestyleTV Жыл бұрын
yes the trans harness doesn't control anything on the manual but it does control the widebands
@DrtyBrd_5.0 Жыл бұрын
I have a 94 doing a Coyote swap. Definitely watching all your video. And going to need your help. Lol 😂. Do you guys work on your own cars only or do you do swaps for customers as well ??
@MoctezumasRevenge1 Жыл бұрын
Do not shop around on YT for mechanics. talking from personal experience. unless they are local, do not do it. I can only think of one exception after my other example passed away.
@Yojujux10 ай бұрын
Y’all ever do a coyote swap mk3 Supra??
@sanchilandscapedesign63167 ай бұрын
yo that would be sick lol
@5.0Uriel Жыл бұрын
So if I were to do a 3-1-1 swap would I use headstuds meant for gen 3 coyote?
@MustangLifestyleTV Жыл бұрын
yes sir
@5.0Uriel Жыл бұрын
@@MustangLifestyleTV thank you
@AOT-offroad Жыл бұрын
Great stuff dude I love this vids and just your shop content and builds. 🤘🤘🔥🔥
@chriswalsh7582 Жыл бұрын
I’m thinking of coyote swapping my 85gt
@MustangLifestyleTV Жыл бұрын
do it!
@chriswalsh7582 Жыл бұрын
@@MustangLifestyleTV what are the chances you’d have a complete OE exhaust for a 2014 gt500? My SuperSnake is a bitch to pass emissions in Massachusetts. Swapping the exhaust might be an option.
@kylejohnson7258 Жыл бұрын
Ima coyote swap my 97 lx thunderbird
@mr.cat3406e3 ай бұрын
Link to your shop
@AlejandroMolina-k8h11 ай бұрын
How l can make contact with you guys
@Bv2free Жыл бұрын
what oil filter adapter are you guys running on 11-14 f150 engines instead of the oil cooler?
@MustangLifestyleTV Жыл бұрын
Mustang oil filter housing
@Coyote9smilespergallon Жыл бұрын
Andrew, is it ok without a nightmare to put a 2020ish GT500 stock supercharger on a Gen3 2022 Mustang GT? And do you have a connection to sell one to me? I’ll pay you for it and extra for any guidance thank you
@MustangLifestyleTV Жыл бұрын
It doesn’t directly bolt on because of Direct injection
@midnight3478 ай бұрын
It can be ran with a big ass spacer vmp sells one I think it won't fit under stock hood though you'd need a cowl if you did that.
@Coyote9smilespergallon8 ай бұрын
@@midnight347 I went ahead and got a Gen5. Whipple , thanks tho
@98saleen8 ай бұрын
Great vid.
@AlejandroMolina-k8h11 ай бұрын
I think you guys sale parts
@KM-uw4ez Жыл бұрын
GREAT video!
@Lethal_Venom Жыл бұрын
The flowmster dumps comment will trigger some people lol. My 04 Cobra had Flowmasters on it and I had a borla system bought before the car even arrived from shipping. More GT500 content...the black one....with boost....the new one lol
@midnight3478 ай бұрын
All modern gt500s are boosted lol
@Lethal_Venom8 ай бұрын
@@midnight347 Obviously…. I meant more boost than stock
@CT-pc3rh Жыл бұрын
Great video bro
@jameskocks4734 Жыл бұрын
my concern is and no one is really talking about is that whether youre doing an old school five oh or this is the insurance on it. State farm etc. wont cover mods like this. they will give you blue book and then you're fucked. Hagerty will cover something like this but you have to have a garage and a daily driver. plus the old foxes are easily stolen. just my 0.2 if im wrong please call me out i am wanting to an 87-93 with an old 5.0 and im still doing my homework BEFORE i buy my mustang.
@midnight34710 ай бұрын
You can just sell the driveline or use it again if you wreck it or something. That is the main thing adding value to it anyways. Value wise far as what you can sell it for its definately more typically with a well done coyote swap. You don't mod a car based on what your insurance will cover at least I've never heard of anyone doing that and I never have.
@jeremiahlinton9582 Жыл бұрын
Love it!!
@MichaelGillen-if1nr Жыл бұрын
Coyote in the new bronco, should come from the factory
@AlejandroMolina-k8h11 ай бұрын
I wish you guys can help me
@raimondoraymond408218 күн бұрын
You got me sold
@talltimbot Жыл бұрын
Spend your coin on a Sprint Car engine with massive squeeze
@badasscop4459 Жыл бұрын
What do you need? Money baby
@timothywatson8284 Жыл бұрын
A lot of funds
@mikeclark740 Жыл бұрын
Sweet brother
@Json.- Жыл бұрын
I wanna see more terminator and OG videos
@kennyz321 Жыл бұрын
Money
@Joemauma_ Жыл бұрын
Coyote swap the world!
@AlejandroMolina-k8h11 ай бұрын
To build my dreams with my 🚗
@KapcomRacing Жыл бұрын
Ooooo 😮
@dillonconrad1697 Жыл бұрын
I wish you would swap my car 4 me coyote swap dreams hear in canada no one noes any thing about this shit