for the armguard better use tpu or pla? what the best setting for it?
@CraftChannelYT2 жыл бұрын
@@TERBANGFPV 95A tpu
@88ElevenShop2 жыл бұрын
You are very good ! hihi You look like an iron man! Thank you for your video. I'm from Vietnam and I love drones like you
@nomoresend6031 Жыл бұрын
I don't know how much good the Drone is but the one who's flying it is much more better then the drone ‼️
@Girtthquake2 жыл бұрын
Great build! Though i will suggest using flux when soldering, as you want the solder to dissipate evenly through the entire pad to ensure a good connection.
@CraftChannelYT2 жыл бұрын
Hello, Thank you for your nice comment and support. I will consider your suggestion in future videos.
@MrWizard652 жыл бұрын
Not needed with the right temp/method.
@shavindyajayakody8212 Жыл бұрын
@@CraftChannelYT all price?
@jonathanmiller4846 Жыл бұрын
Well most solder used for quadcopter has flux in it already. I think it is most important for rework. That’s when I also use flux pen. And sometimes with micro soldering
@adybarker47332 жыл бұрын
I've watched this a few times now cause I want to build my own FPV but I'm still confused, lol. Which wire goes where, what setting is set to what? More research is needed but thanks for the great vid. 👍🏻👍🏻
@aakashjana62252 жыл бұрын
Upgrade the quad to BF4.3 and try the supafly juicemode freestyle preset tune. DJI SBUS fast rc link preset. 48khz BL32 frequency. Also build looks heavy so dynamic idle of 50 should be good.
@imumutkilic2 жыл бұрын
Efmod'u görmek güzel oldu. :) Elinize sağlık güzel bir montaj videosu olmuş.
@CraftChannelYT2 жыл бұрын
Güzel yorumunuz için teşekkür ederim 🙏
@Top5ListYT Жыл бұрын
One of the amazing drones of 2022 is the Freestyle FPV Drone.💯
@LVDLamVanDuc2 жыл бұрын
Trông hất hầm hố và mạnh mẽ
@jaziborilistyle58112 жыл бұрын
Such an awesomeee job on this video 😍😍😍😍😍😍😍😍 keep up the amazing work❤❤❤❤
@k1ortia2 жыл бұрын
I love how he says you need this electric screwdriver to complete the build..lol. been doing just fine with my $19.99 hex drivers for years..😉
@k1ortia2 жыл бұрын
lol. ok.
@Nukeussr6 ай бұрын
@@k1ortiadid you comment to your self
@mlx832 жыл бұрын
very impresife but I would worry about power leads :) they are only on side solder joint wonder how long this will last...
@MrFadjule Жыл бұрын
Yeah, the wires aren't even close to touching the pad, I know they don't have to be in direct contact, but they should at least be CLOSE. That's just held on by a bridge of solder that's ~4mm long. Vibration, heat, and crashes are gonna desolder/break that eventually. Wouldn't take too much aggressive flying to desolder it.
@tabassam-ali2 жыл бұрын
Great Build...!! *Racing Track* is the best part...😍🤞
@tabassam-ali2 жыл бұрын
Seriously 😅🤓
@travelcompass591 Жыл бұрын
Hi 🤠 I just found your video, very clear view of the putting together process. What is the total cost of this DIY drone?
@na9er472 жыл бұрын
big like 👍👍😍😍
@CraftChannelYT2 жыл бұрын
thank you
@emrahkzlrmak30332 жыл бұрын
Emeginize saglık mükemmel bir çalışma 👏👏👏
@Talem25032 жыл бұрын
Thanks, it's a great video
@pablinsaaid94192 жыл бұрын
if I have no experience in electronic. if I order those pieces and follow your steps, would I be able to put it all together, mainly the wiring and solding, or it requires some knowledge like in circuits,. Also, how much are all parts +- ? building one looks awesome, and driving it even more I hoppe you can answer my question. Thanks in advance
@bayunugarahasuparto1122 жыл бұрын
How flight time?
@SYKJ-r5z Жыл бұрын
I love this camera, drone❤❤❤❤❤❤❤❤❤❤❤❤❤❤🎉🎉👍💕👌
@Velzar3 Жыл бұрын
The stability man😮
@heniusmancriss93782 жыл бұрын
Odlično letenje, edino mogoče bi blo ok kakšna razlaga pri sestavi drona...vem, da ne razumejo vsi angleško in si veliko folka želi v fpv sceno, drgač pa lep clean build :)
@cakir3desing2 жыл бұрын
Maşallah abi çok güzel olmuş
@lukalama22182 жыл бұрын
how long does this drone fly? and how far can he fly?
@2shaiinssfpv8322 жыл бұрын
Awesome job for your first build !
@cainedavid8163 Жыл бұрын
Have you got 1 price please? Thinks for the super video 👏😍
@phamlocnhan54722 жыл бұрын
I LOVE DRONE FPV.
@merdoVFX2 жыл бұрын
what the max time u can flight with it? iwonder how igot like 20 min on drone whatt kind of battry i must buy
@NEACLOTHINGTV10 ай бұрын
very nice love it❤
@Michael.C.Duisburg2 жыл бұрын
grade die einstellungen brauchen erklärungen, schade, ansonsten ein tolles video wenn es mein stummfilm wäre
@toughgaming9602 жыл бұрын
Wow so beautiful.
@overfly_pt2 жыл бұрын
Excelent vídeo 👌👍 Great Job 👍👌
@bnichols1958 Жыл бұрын
Nice video, what is the brand of the digital screw driver you are using?
@nhantran82542 жыл бұрын
Nice image quality
@TheMistral2 жыл бұрын
Hello. With such an amazing vídeo and drone I’m finally going to build a pretty similar one. It would be much diferente if I use the T-Motors V 1750 instead of T-Motors IV 1950?? I will also use a Nebula Pro instead. The other parts are exactly the same.
@mister_ginting Жыл бұрын
you say amazing
@egos62 жыл бұрын
Epic.
@flygeopixel83462 жыл бұрын
çok beğendim de karagöle cıkarken ki verem savasın orda nasıl olduda denk gelemedık orasını anlayamadım :)
@tacettinayd8166 Жыл бұрын
Nice video 👏
@sergeyparfenyuk2677 Жыл бұрын
Скільки пролетить з РКГ?
@kuyapeng92102 жыл бұрын
Thank you🙏
@CraftChannelYT2 жыл бұрын
Thanks for the nice comment.
@OdysseusVrakas2 жыл бұрын
Is having 3 arms needed as well?
@sridharvasanth Жыл бұрын
can any one plz suggest the right fpv goggles for this build
@phamlocnhan54722 жыл бұрын
THANK VERY MUCH. THANK USA
@fun4you7752 жыл бұрын
Getting int0 the hobby! Bruh
@elibaganfpv83872 жыл бұрын
Great build! What is that prop grip thing you were using when tightening the props on called?
@gregstewart46922 жыл бұрын
RDQ carries a prop tool that looks like a pair of pliers that I use on every installation. They are not super expensive and they work on pretty much all FPV motors.
@xXxxUSDxxXx2 жыл бұрын
Nice and clean ! Which Goggles do you fly with this Camera setup ?
@mrMihaylo2 жыл бұрын
DJI Goggles
@kart_racing8566 Жыл бұрын
Hey if I had you build me a drone exactly like this one how much would it cost me ? And with the be headset?
@logo6923 Жыл бұрын
man i want to start building one but i dont have a good budget do you know anyway i can get some part for free
@995ieieodkddk2 жыл бұрын
Salut quel est le poids du drone avec ou sans batterie et GoPro svp merci
@sheeshifpv78612 жыл бұрын
Hello! Avec presque la même configuration, je suis autour des 300gr sans gopro/batterie. Considère un poids de 700-800 grammes avec tout compris dessus
@yeremyfrei6089 Жыл бұрын
Can you make a DJI air unit 3 build with DJI FPV Remote Controller 2 compatibility?
@Hong-tb6ho2 жыл бұрын
Is he wind resistant? Will the wind blow it away?thanks 😄
@erfan-nv8ib Жыл бұрын
Brother, are you Iranian? I live in Iran and I am Iranian, please answer me
@itarchitect.online Жыл бұрын
it can fly with gopro ?
@srmoder135792 жыл бұрын
Só coisa boa... Meu sonho.
@jeggthaoochannel82392 жыл бұрын
From a man who never done this before. Look easy but….where to start 🤣🤣
@lukashardt4292 Жыл бұрын
Where did u get these blue mounts for the cam ans antenna?
@VikingMediaSite2 жыл бұрын
Bra drone bygging :)
@aplantisaquarium5554 Жыл бұрын
Good
@angerfist12052 жыл бұрын
welche Brille nutzt ihr zum fliegen?
@jakt0naustria2 жыл бұрын
What goggles do you recommend for it?
@fuloxy1469 Жыл бұрын
Y'a pas le 1er produit sur le site en description, une alternative ?
@gazzabyerun81522 жыл бұрын
So glad that i came across you're channel, I am a old dog trying to learn new tricks especially when it comes to these type of 🛸 drones, building , setting up on 🖥 beta! No clubs anywhere near me in the ⛰🗻, so it's you tube college for me! I have a ❓for you! Would you use lock tight on the bolts that hold the frame together❓Thank you for doing what you do on passing this type of knowledge to us 🍒. 🤣😂When it comes to flying, i am like driving Ms. Daisy, no fancy flying for me for at least now! 🏴☠🔱Semper Fi‼Be safe... Just subscribed and going to check out you're other video's!
@andreasaigner56082 жыл бұрын
Hallo vielen Dank für das tolle Video, bitte um Information wo man die 3D Daten der türkisen TPU Anbauteile bekommen kann.LG
@marvinspeedperformance4316 Жыл бұрын
how much for the kit and controller? thanks
@Theomyu7 ай бұрын
Tu va a quelle vitesse avec ?
@DanielmFrei Жыл бұрын
I have two questions: can you also change the air unit to a dji air unit 3 and do you need that crossfire thing or can you put that away if you use a dji air unit 3?
@DanielmFrei Жыл бұрын
And can I than use the dji goggles 2 and dji fpv controller?
@nitsujkram14442 жыл бұрын
that's a very nice build, How much would it be if you'll sell it?
@Izya_Weiz2 жыл бұрын
What's the track?? Please give the name. P.s. nice drone
@hidayatanwartraveler7778 Жыл бұрын
Kak gimn cara agar tahu mn yg di solder in outnya
@celaldoor2 жыл бұрын
Kanal sahibine teşekkürlerimle beraber yeni başlayacağım BumbleBee HD V3 düşünüyorum ne dersiniz. Kumanda dji mı alsam txlerden mi alsam bilemedim.
@khoipham9c602 жыл бұрын
Bạn làm thuyền nữa đi .thuyền dùng xăng
@lfrecords3970 Жыл бұрын
Τα TPU PARTS για την μονάδα τα κάνεις εσύ γιατί δεν δείχνει ότι τα έχει στο frame μέσα σε κανένα μαγαζί????
@skrasool54388 ай бұрын
Hello sir what is the range for gps
@sridharvasanth Жыл бұрын
plz do share the matching Fpv Goggles as well
@mareksykora57702 жыл бұрын
hm len to gps ti akurat pri ptrate signalu vysteli ton boh vie kam napr do koruny stromu
@adailtondasilva8782 жыл бұрын
How much do you charge to make one of these for me?
@CraftChannelYT2 жыл бұрын
Hello, I only make it for myself as a hobby. I can't build for money. All parts list is available in the description. If you have problems, do not hesitate to write to me. I will gladly assist you.
@Vod-b4n Жыл бұрын
On what max distance it can fly?
@kidsdiana6480 Жыл бұрын
Hello, I am very interested in these things. If you help me, it is possible to make something like this and I will buy it Please 🙏 ❤
@landerojimenez7272 жыл бұрын
Oye Tío Pero Que Impresionante Te A Quedado FPV Me A Encantado...Vale Vale Me Gustaría Que Me Dieras Opciones Si Me Puedes Armas Uno Y Cotizar Precio ,,,A Otro País?
@HậuNguyễn-c3z4 ай бұрын
anh dùng loại cánh bao nhiêu vậy ạ
@jubayerhossain-ib9nm Жыл бұрын
ভাইয়া দাম কত পর্বে এটার
@SOKHUN48 Жыл бұрын
How much is that I want to do it for my own
@nguyenlong4274 Жыл бұрын
How much did you build this quad?
@peco512 жыл бұрын
js bi pa upraso kako konektati kontroler do drona
@x7reflexofficial2 ай бұрын
how much almost cost
@TranTinhVlogs Жыл бұрын
Giá nhiêu bộ máy bay vậy ?
@JR-fs1xt8 ай бұрын
Why did you completely ignore the “no motor output” part of this tutorial?
@hoangnamnguyen3889 Жыл бұрын
What frame,pls?
@lew0462 жыл бұрын
OMG. That soldering is.....
@XdHh-nj6jc5 ай бұрын
LOVe🙏🙏🙏🙏
@mikeyjames10002 жыл бұрын
I found that frame too bulky (gave it away) the batteries also I have a problem with that brand got 3 all died in a few months got dinogy and tattu's now and that's over 1 year ago cell's are still healthy I'm happy, all in all not a bad set up. 😀