Craftsman 42 in snow plow, and David Bradley tractor plowing snow Jan.2017

Snow plowing the driveway with a Craftsman II 42" snowplow, and a David Bradley tractor.

[@jointman429]

I have the same tractor and These old craftsman Are as reliable as it gets

[@bosschile4049]

I have the 12 horse series currently adding 48 inch ATV plow check out my vid

[@jerrynibarger9148]

I have a David Bradley snow blade on the front of my Craftsman mower. It works great. Nice video.

[@romandeville]

Nice David Bradley. Great tool to have for the yard and snow.

[@jimoef]

I use mine all the time. Works way better without the moving deck on it.

[@Cashcrop54]

Love the videos!! I have a 46” Craftsman mower model 917 and I just got a Craftsman 42” snow blade model 486.244414. Going to install it this week sometime. I hope it goes well. Looking forward to using it.

[@SPCLPONY]

​@@UrbanSuburban Most smaller snow plow blades have a spring and lever on the center of the mount behind the blade. The lever controls a pin to fit in holes, or the lever itself fits into notches to keep the blade centered or angled to left or right side.

[@SPCLPONY]

@@UrbanSuburban The cable could very well be broken or disconnected. It might help if you had someone operating the lever on the handle while you watched the mechanism on the plow. If it's the cable, I'm sure a new one can be purchased from Craftsman or Ebay.

[@JodBronson]

I put this on my John Deere, works great except for hard ice or frozen ice :/. But it worked on John Deere and MTD Craftsman

[@highsiderider]

I have the the same and knock wood itnalways starts and I've had it for over 10yrs now.

[@albion2742]

Put some kind of seat on the D/B sit on it to give more weight.

[@ApastronRetro]

craftsman?

[@bosschile4049]

Would it work with a 48 inch ATV plow? I have a early 90s Craftsman 2 with a 12 horse icbriggs

[@cc123456789]

how long did this take you?

[@j887276]

Nice Oldsmobile Intrigue, still have it? Do you think the plow will work on a Craftsman T110 mower?

[@robertrenaud8793]

yeah dude...

[@zinmot5457]

You need a snow blower attachment

[@Hooverdarnit]

Do those blades tilt left and right or just left?

[@stephenfestus9268]

The blade will tilt both right and left. On the arm that raises the blade is a handle which will unlock the tilt mechanism, and you have to push or pull the arm to change the blade direction.

[@larrybridges3202]

im kinda dumb on this stuff.will it hurt the deck with it on ?

[@stephenfestus9268]

Not really. The deck is very heavily built, and it adds extra weight to the front end. With all of the weight on the back tires the front tires would skid when I turned, and with the extra weight on the front they get a better grip when turning.

[@larrybridges3202]

Stephen Festus good thank you buddy ive got a 06 1000 from my friend plow and all dont have a large area to do in winter i just didnt know if it would harm the deck and belts thanks for your reply lets hope the winter will be mild again im in ohio.thanks again.

[@jtbassgambler2594]

Nice

[@hondabear6603]

Did you buy that plow or build it

[@stephenfestus9268]

I bought it at Sears. It has to be assembled, but it is very straight forward, and can be done in about an hour. Also the kit comes with two separate mounting brackets so it will fit on different types of tractors.

[@hondabear6603]

Stephen Festus did it come with chains and how much was it

[@stephenfestus9268]

The Sears website says it sells for $234.00 I paid a little less than that due to discounts. The chains were extra, so to keep the cost down I made my own tire chains from chain and screen door springs purchased at Home Depot.

[@hondabear6603]

Stephen Festus thanks for the help I will be looking into it I need something to plow my dads huge drive way.

[@slliks67]

@@stephenfestus9268 do you have any vids on the chains and how to make them and put them on tires

[@davenelson2901]

put the dam thing in garage....make it easy on yourself

[@carterkillorn7328]

Is that 4x4?

[@Hooverdarnit]

no

[@carterkillorn7328]

Hooverdarnit how much snow was it?

[@MisterTwister88]

Mower deck 🤦‍♂️

[@genedandy]

MisterTwister I’m with you on that. Great way of ruining that mower. 😮

[@JodBronson]

Not if you raise it high enough.

[@genedandy]

Jordan Bronson most mower decks raise about 2”, 3” at most. Manuals even call for deck removal, but hey, if anyone wants to leave theirs on, then by all means knock yourselves out 😎

[@JodBronson]

@@genedandy - Most of Ours are like 5-6" raised!

[@zachferguson8968]

And?

[@shiftedproductions1629]

Lawn mower

[@debimendoza4135]

l l l . R Lyl . ' l Rm .. . . ... i .XXX.XXXXXkx.x t KC ..X Kk.xkjl ., .

[@geraldmurtha3916]

myerssnowplow