Husqvarna tractors - how to attach snow blade

[@SnowBlowersDirectCom]

Nice video! You're one of the only companies I've seen who's produced quality how-to videos showing assembly. Keep up the great work! #snowblades

[@teemudgeon262]

Great video for assembly. Definitely easier than the paper instructions. One thing I came across was when mounting the tube steel shaft over the solid core steel shaft @8:42 there was some welding slag inside the tube steel which prevented it from sliding over the solid piece. You'll need to take a cylindrical file to it and wear it down til it will slide over properly.

[@stefanherberth1871]

Hello Purchased a REDMAX snow plow. With your video made it easier and knew how to install quickly. Their directions are bad, Thanks Again/ You made life easier for me

[@jerrysegalla8597]

I appreciate the video. The Husqvarna 48" tractor you are working on is a little different than my 3-year-old Husqvarna 48" tractor. I ended up with too many of some bolts and not enough of others. There were a few other differences. The silver control rod would not go through the hole. I had to drill it out a little. It all worked out in the end. The blade is very wobbly. I think I will add additional bracing,

[@gilbertoramos5132]

This snow blade system is the same one as the craftsman version. I installed a craftsman plow on my Husqvarna and it's exactly the same...but cheaper. Works great with wheel weights and chains.

[@Drop_N_Chop_LLC]

Thanks for the video! It's the only way I could understand the instructions!!! Much love!

[@gary44444444]

I just bought this. Amazing engineering. I made the mistake of originally buying an Agri-Fab Universal, and you literally have to re-engineer your mower to make that one fit. This one is so much better.

[@bferrell]

so much better than just reading the manual.... thanks Husky.

[@dasbhaipaneliya2393]

bferrell

[@alfredosayon]

GREAT VIDEO WITH ALL CAPS!

[@jarrodemond4885]

Literally the same outfit my great grandpa would have worn to work in the yard lol He had a state job

[@nickpage6500]

Thank goodness for video my first time putting plow on my tractor I had things backwards an manual was kinda useless

[@kennethbredow3098]

First remove the mower deck then install plow and chains then get stuck in the driveway.

[@GP9railfan]

Maybe if you put the plow on a small tire yard tractor. Our GT54LS has a locking differential and doesn’t get stuck with the big back tires.

[@FatimaBabur]

looks like i am missing some parts, is there a way to get them through husqvarna? don't see it on the website.

[@nisw1918]

Thanks, now make one for the rotary brush attachment please .

[@fredrickward7672]

Can you use the plow attachment to grade gravel in your driveway

[@garlandlafrance3305]

im 13 and i drive a lawnmower its fun i will keep it forever

[@jeremiahsjohnson2641]

Garland, lawnmowers ROCK!

[@HM-ke1qm]

I love the beautiful song in the background.

[@tc1uscg65]

Kinda looks like a PITA. Just bought a new YTH24V48. It's getting delivered on Monday along with a bagger. But after seeing this video, think I'll keep my Ariens LT824 snow blower. Also see it's on sale (100.00) less. Hope they will take another 100 off.

[@jimmycarter9099]

I got a small ford light 120 she’s slow but it works for me a bucket rear blade and rear tiller but I also have a mtd and just leveling the driveway with small scraper blade on the back good luck

[@user-yg4br9ji1n]

What's the model number for that plow? I really just need to buy the side mounting brackets. Can I do that?

[@vojtechjanjurecka7285]

Do you know czech brand Vares. I dont´ know why i should ne that difficoult as this. There is only a one pin and for first you only need to mount a hook to the chasis with to screws.

[@saliston]

Why can't they make a universal mounting plate for the snowblower and plow to make a quick change between the two.

[@acuentawib4150]

what model is that snow blade? I am interested to buying it, because everything has to be done with wrenches. It is firmer and more secure.

[@roderickdcrawford9982]

And by the way that connecting rod you're putting on there should have at least three washers or a good heavy washer because that thing after a while flops around

[@roderickdcrawford9982]

And another thing about that you should have caps on both sides to keep the water out not just on the top

[@znovosad555]

Talking about your product would make the video more engaging and interesting

[@yannbnd7776]

Zach Novosad rft

[@JoeJumps]

How do you adjust the ride height when in the up position?

[@constantinmaftei3404]

domnule stupar de la timi aveti perfect dreptate cu placute si ulei. dar sint mai multe piese de asemenea fel ce parere aveti

[@yannbnd7776]

Op

[@Supermuttt]

That mounting bracket is soooo low to the ground. Really only good for plowing suburbs driveways.

[@shadowcast1975]

I bought a lgt2654 not to long ago,wanting to get a snow plow for it,could you tell me if my model has this tex style frame the plows I've found say is required?

[@husqvarna]

Hi, Contact Husqvarnas Support, www.husqvarna.com/uk/support/husqvarna-self-service/. Your Husqvarna Team

[@0415gordis]

Where do I find the mounting brackets please ,need link thank you

[@edyn_5473]

Where do you get the side mounts for this having hard time finding them

[@aleksandrsprusakovs4593]

Jag har köpt plog, men handtaget hamnar under broms när jag lyfter upp plog och läger sig nästan på fram hjul( kanske söndags modell, he he). Kan man böja någonstans att lyfta upp?

[@SteelPhoenix78]

Does the mower deck have to be removed to use the plow?

[@husqvarna]

Hello! Thank you for your question. The cutting deck does not need to be removed when using a snow blade on a garden tractor. This is because the snow blade is mounted to the front of the tractor, while the cutting deck is mounted under the middle of the product. Therefore, when plowing with a snow blade, the cutting deck does not need to be activated. I hope this helps! /Your Husqvarna Team

[@Katmandu2]

How effective is this tractor/blade at leveling dirt and gravel on a driveway ?

[@JD-tl7ld]

Not very. It's a lawnmower with a thin steel blade. You go plowing dirt or gravel with it, and you will bend the hell out of your frame. Today's lawnmowers are large and flashy, but are weak as hell where it counts. My Husqvarna is a middle of the road model. Neither high, nor low end. I opted for one with a reinforced frame. The frame flexes like a mofo just mowing with it. You want something you can really plow with, new garden tractors that could take it will run about 6k on the low end. It pays to keep a real workhorse on hand for real work. Mine is a 50 year old International Cub.

[@TheMitchbassman]

Ha HA HA HA .. did you REALLY ask this????? Those thing are not going to do anything with gravel... Or push any dirt without breaking.

[@GP9railfan]

You need the Dozer/Snow blade version, and a Garden Tractor version to push gravel, or you will break stuff real fast with just a snow blade and a regular lawn tractor.

[@robertjackson2739]

Anyone know where I can find a replacement grip for angling the blade from my seat?

[@ohno1622]

Why are people complaining out how long their taking, theirs going slow so you can follow step by step.

[@scottcourtright8971]

Where do I get the brackets shown at 0:48? The ones that mount to the frame and allow for a front mounted snow blade to attach... I have all the other components except for these brackets, and I'm having a hard time locating them.

[@Derek-wd4vt]

shouldnt you put a washer on the bolt side and nut side?

[@kurlis]

i was wondering what the cable was for, swivel on the fly

[@aavamalamute7039]

Can i use the snow blade on mu ts238

[@expertopinion8111]

Parts where can you get

[@husqvarna]

Hi, for spare parts, manuals, accessories check www.husqvarna.com/se/support/ /Husqvarna Team

[@haroldshinski7922]

They need to get a better engineering dept. My '71 wheel horse is so much simpler. Plow pushes from the rear instead of the front. Off and on with 1hairpin and 2 camlocks in less than 5 minutes..

[@davedarling7373]

Can the brush guard be left on ?

[@husqvarna]

Hi Dave, Please check out our support site for more available information. www.husqvarna.com/support/ Thank you, Husqvarna team

[@luisk155]

Se vende ese accesorio en Argentina. Gracias

[@Hankxiong]

Impressive! How much?

[@Drop_N_Chop_LLC]

I paid 420 out the door

[@CharlieKellyEsq]

What are you putting on the lever @ 8:35

[@GP9railfan]

Annoying repetitive music, but helpful video.

[@Bladerunner4924764]

That's why they invented volume control.

[@mrbubetube]

it's youtube. nobody's going to watch this video without music

[@TheMitchbassman]

No washers behind the nuts? Kinda , not good...And.. watched the whole video.. Waaaay to many parts to put together. Most of this should be prefabed, to be assembled. And only the blade brackets should need mounting. That thing must be REAL cheap

[@miles267]

What is the part number? And is it compatible with the YT42LS?

[@GP9railfan]

Jason Miles No, not really compatible without an uneconomical transaxle swap first. I wouldn't put this on a YT, the K46 transaxle on your YT will burn out in a matter of just a few months. This plow is meant to be used on the GT's/GTH's that have the K66 series transmissions in them. These type of plows/ground engaging implements are not designed for the LGT/YT series. You'd be better off with the 42" snowblower attachment instead.

[@miles267]

GP9railfan thanks for reply. I've since sold this tractor. Great machine with Kawasaki engine. But replaced with ZeroTurn for my yard.

[@andreiflorea789]

Foarte frumos

[@willfoster9715]

The blue dress shirts being the exact same freaked me out...

[@dirceurogeriodasilva8294]

Good evening , Where Can I Get These Accesories tractor Husqvarna LGT2654 ? Could I say - me Somewhere That Be ? Thank you!

[@GP9railfan]

Dirceu Rogerio Da Silva Wouldn't recommend this on a LGT's with the weak transmissions. The LGT series have the K46 which is not up to the task of using ground engaging pulling/pushing implements, such as plows, or graders, etc. The better option for your LGT would be to install a snowblower instead to alleviate any unnecessary drag stress on your K46. The snowblower would take the place of your mower deck during snow season.

[@Johnny53kgb-nsa]

@@GP9railfan If the Husqvarna LGT2554 has a weak transmission, which is the best Husqvarna to get with a heavier transmission ? Thank you

[@Cherishthemoment]

Please do not do a video like this and not supply a link for the product.

[@danielneeland2034]

Yah, sure, but that is not a tractor. It is a riding mower. Still, we have to work with what we have. Proper language is still important.

[@paragsurati1549]

what is to model # for this snow plow?

[@dannythedeerenut3897]

i can have the plows on ALL 3 ofour '80s jd garden tractors in half the time...

[@znovosad555]

DannytheDeereNut I could fabricate one for my 80s ford LGT 100 quicker.

[@brianmac1900]

That might be true but modern deeres are garbage. You can't even change your own oil for cheap.

[@jnisme]

Cool. Go watch or make that video then. This is a video about Husqvarnas, and has zilch to do with JD.

[@cevriyedogan6466]

Fiyat ne ben bahçe sürmekte kullanacağım nasıl güç ne olacaktır

[@husqvarna]

Hey, thank you for your question. Please, visit www.husqvarna.com/ and select your location. In the contact section, you will able to find the information you need. Best regards, Your Husqvarna Team 🌳

[@jonathanerickson2007]

Can you plz do that for my lawnmower too

[@jonathanerickson2007]

How much is that plow for that lawnmower?

[@matchesmalone79]

$300- $400

[@jonathanerickson2007]

Ok thank you so much

[@jonathanerickson2007]

Will they put it on my lawnmower for me?

[@rickyscott6830]

would this fit poulan pro 19 hp

[@alfredopresa5861]

Where can I get this blade?

[@dirceurogeriodasilva8294]

gostaria de comprar este acessorio para 2654 , como faço ?

[@leonp333]

My wheel horse 522xi gets this done in 30 seconds and it's 2002

[@machew2009]

Where is the person telling you how to while actually doing this video is not goo you just have guys there assebling the snow blade there is no one there discribing what is actually going on like a good how to video would have

[@gennadiibogatsov7792]

super!!!!!!!!!!!

[@mamox88]

Mota anche su mcculloch?

[@sandalanalyst]

im wondering why they show the washers going between the frame and the brackets when in reality they go behind the nut on the outside of the bracket so the square part of the carriage bolt holds the bracket where it needs to be and solid.. WOW

[@62bryfry]

Actually its a shim, not a washer, designed to bring the mounting bracket out away from the frame to make it even. If you look at the upper bolt, it doesn't use the shim because of the extra frame piece. Otherwise, without them the bracket would be cocked and it wouldn't mount properly.

[@DaddyElfMan]

yeah... I saw that too.... lmao.... unless they are using as a spacer and then there should also be a washer (maybe a bit smaller) between the nut and the assembley

[@TheMitchbassman]

@soaringtractor .. It still needs washers BEHIND the nuts. It can be seen the nut is wallowing in a hole as large as the nuthead itself.

[@mr.scott-gfr]

I'm french and i don't have snow 😢

[@jadenjacobs8667]

will this work on my poulan pro?

[@elliottborrero9161]

Noooo only husqvarna

[@showtime813]

Nice vid

[@devinreed9436]

You should start making hydroelectric

[@MRIDNETGUY2004]

What's the music

[@jaydenstaggs5998]

Where did u get this plow from

[@adta3765]

Amazon sells them.

[@CB-js6yx]

Don’t show that well on how to put together it freezes on there end

[@sandalanalyst]

and why isnt that spacers id the same size as the bolt that its going onto for that cable.. that's cheap

[@joshuaharrison699]

Just shut up you couldn't do any better

[@haroldshinski7922]

+joshua harrison My wheel horse is 10 times better.

[@joshuaharrison699]

Wheel horse are as about as good as a nun in a stripclub Absolute load of shit

[@haroldshinski7922]

+joshua harrison you obviously don't know what your talking about fuckhead . The only thing thats a load of shit YOU !!!

[@pauldenney1276]

The shoulders of the carriage bolt extend through the frame. The large washers accommodate that material for a flush fit. Actually good engineering. Otherwise would require special carriage bolts

[@dantedanis]

It is painful to watch this. My snow will melt until I attach this.

[@КоляДемиров]

Икmушя Сколько кончик Спасибо

[@caseydalen5278]

My gt52xlsi was the worst investment I ever made. 157 hours and that dumb smart switch stopped working! Please contact me and offer a solution to replace that weak weak weak smart switch!

[@jmoth79]

whats the plow blade part number?

[@volvoEC240Blc]

***** don't be rude, jmoth can have an opinion

[@buchwacker]

Item # 741130 Model # 588181302

[@robertlaffertysr.1621]

The written instructions are useless. Illustrations are poor at best. Follow the video. Make sure you attach the blade skids prior to attaching the blade to the tractor, it will be much easier.

[@ionut-ss7pb]

bravo

[@JD-tl7ld]

Looks like the finest steel China has to offer. What's that rated for, like half an inch? You can't turn a mower into a plowing tractor, unless it started life as a ground engaging garden tractor. My 1000 pound International Cub laughs at that.

[@geyser3445]

Do you know you are allowed to talk?

[@roderickdcrawford9982]

You know I like your setup for putting the plow on but the plow set up is a joke and that is my comment the cloud design is a joke because the minute you start using it too much for you accidentally push it too hard into the snow the latch that locks it up brakes and then you can't lift it up then you're fixing it up

[@roderickdcrawford9982]

How come not to left hand instead of a right-handed don't you think it'd be better right handed then left handed you should be able to put that on both ways either left handed or right hand because I'm I'm right-handed and that thing is a complete joke to me because I can't use my left hand to do that

[@azimmey]

Lot of cheap parts being used just like the cheap parts on the mower.

[@mygiguser]

and chinese tools

[@beastmodenicchavez7452]

This brand sucks I have one the belt keeps on coming off

[@LIMowersAndMore]

Ugh, why did you guys decide to put on that crap motor

[@bergatube60]

This rediculous lawn mower , which I happen to struggle with in my garden , can hardly cut the grass, far less will it showel som snow, it is a piece of toy for children

[@_multiverse_]

bergatube60 i dont get how these things can push snow with an open differential

[@mygiguser]

large chains on the wheels

[@tinsanis5875]

too much work other companies tractors are more simple

[@MultiVinicin]

Será que ele aguenta fazer isso com terra

[@housemachine509]

Pssst. Get a dedicated snow blower. Done.

[@orangejuli07]

This alone makes me want to go for a different tractor. Why in the world would you make it this much effort to attach anything?.. poor planning

[@donben7622]

Nem tetszik 😮😢! Hozzadalmas , aprólékos , sok alkatrésszel járó munka . Hogy szereli fel ezt egy akárki magán ember 😮😮😮?! Azért a borsos árért amibe kerűlt ! Vagy hívja a szervízt felszereltetni egy újabb borsós árért ??? A konkurencia talán egyszerűbben megoldja ....😅😊😮!

[@husqvarna]

Hi Don, Looking for the best option when buying a new garden tractor? Here are a few tips; www.husqvarna.com/uk/learn-and-discover/buying-a-garden-tractor/: For information about service and support, please check www.husqvarna.com/support/.

[@O7ROADKING]

get a craftsman no tools required.on any of the attachments

[@koldpizza7152]

O7ROADKING why did I then use tools when I assembled my craftsman snow blade

[@jtaylor8669]

PotatoPie because that Craftsman was made by Husqvarna

[@andrewmullin3625]

Get a John Deere

[@harriscreekcentral]

That is practically identical to the blade I have on my Craftsman. The only thing different is possibly the bracket that goes on the tractor frame. These would have to adapt to the various tractors. Otherwise the blade is identical.

[@ttinay3781]

I had a Craftsman and now a new model. It is exactly the same snow blade. One other comment: I always had and still having problem with ehe cable (Part number 49808). it breaks very easy. I installed one yesterday and it broke when I was trying on the spot. Made in India. Any comment / suggestion will be appreciated.

[@paulikiviranta6428]

Ei tee mitään! Tarvii ison takapainon jos yrittää aurata yli 5cm lunta. Ei riitä pito noissa härveleissä! Ja noitten ketjut on ihan paskat!

[@mlracing1164]

Can u l all like mazda 73 veidos plese

[@marekkruszel5497]

Ja bym to 5minut

[@gulsenangishan2281]

my turkish

[@АндрейПоливанный-у4ф]

Батя