CRAZY bedini adams magnetic pulse motor generator !!! Fast !!!

I made this inspired by alternative energy stuff from bedini and adams. It's a 6 coil very simple magnetic pulse motor. I have made everything on autocad before working it out on CNC. Looks and sounds greate + charges batteries by EMF. Uses about 800ma @ 12v :)

[@naokikashima9349]

Next step is to make the charger to run itself. Over unity effect is achieved by pulsing DC at high frequencies. Bedini, Tesla, Moray they all did the same thing. Thanx for the video :)

[@TheBrowseman]

Naoki Kashima Over unity is not possible by definition. All these machines that appear to be producing more than they take to run are just converting permanent magnet energy into electrical energy, which we can use. Magnets are the most amazing things yet underdeveloped.

[@tonyrebeiro]

​@@TheBrowseman That's not true, according to what Nikolai Tesla said. When you switch a coil with very sharp, high voltages(spark gap) you get a reverse collapsing voltage spike, that is higher than what went into the coil. Tesla said, he was getting out 3% more than what went in. This is because the local environment get stimulated and induces extra energy into the coil and when measured, it is over-unity. Even in a motor stator coil, this is possible and the gain is even more because the coil does work and gives back more than what went in. So its a double gain. In my own experiments, I'm noticing this phenomenon, especially when the voltages are higher.

[@АлиБабаевич-и7ъ]

Так оно и работает самостоятельно, во всяком случае в этом ролике

[@Neato3000]

The sound these things make is simply amazing!

[@sethdog14]

nice build, don't listen to haters that can't make their own

[@MrJundc1006]

Did you use PWM circuit ? If not according to Adams it is a must for the system to self-charge and self power to continue moving your motor endlessly.

[@terry9675]

dude that is an awesome piece of kit, with only one drive coil, the plans im looking at now have two, an i agree the sound is mezmerizing. great video.

[@billgaytes6845]

See those wires on the bottom right of the video that go out of shot. Are these connected to the power supply that is running it all ?If you cut out all the motor bullshit in the middle and just connect the power supply to the battery you will find it charges the battery much better.

[@TheRogueRedwolf]

nice work your so close just a little more do the transistors work better being on the coil? and what size resistor? you have 6 drive coils and 1 gen coil?

[@cyrilzapanta5628]

Hello, can you share with me your schematic diagram and parts list with value? I find it interested to make one. what's its rpm?

[@bobamericana3099]

question..what are the black wires at the base going to out of the picture ?

[@sandorkurucz2989]

Szép munka amit csináltál,de az Adams motor-generátor lényege ,hogy több energia keletkezik,mint amit befektetsz a rendszerbe.Sajnos ez a többlet nincs kimérve,nincs bemutatva.Óriásiak a légrések és nem látom, a forgórészen elhelyezett mágnesek és az álló részen elhelyezett tekercsek vasmagjainak keresztmetszeti arányát,pedig Adams hivatkozott arra ,hogy a vasmagok és a mágnesek keresztmetszeti aránya nagyon fontos!Szóval ez a rendszer csak hasonlít az adams -féle felépítéshez,de nagyon sok különbözőséget látok!

[@vutovyou1]

Thanks for this smooth running machine. The standard Bedini only allows one coil, how do you electronically add another? Cascade? Also what kind of platform is your wheel? Either a cd-rom drive or HDD. How did you fasten the mags so they wouldn't fly off with all that force? Can this be applied as a secondary charger for your car? How would you increase to unity or beyond?

[@pacerodi]

I can do that, Tesla Coil-Joule-thief--Bedini configuration,and, using the same configuration to charge batteries. Not for the faint of hearth though! Good video! Cheers! Please, check RWG, for 500.000 rpm.

[@AIexanderHartdegen]

Hi, do you mean it's charging it's self?

[@wolfgangblum1787]

Good built, I like it. You put the transistors in the coil.ferrite cores? Can you give some details of construction pls.Do you have some tests with discharged batteries, or capacitors for output measurement?

[@aquapulsefuel]

I believe that having the drive pulse coil and magnet closer to the center and leaving the 6 pickup coils where the are will yeild much higher rpm.

[@sonnyhoogmoed]

Wow this is cool dude! how did you manufactured the electromagnets? en the rotor does it have permanent magnets or something like that?

[@123kkambiz]

It shows it increase the output voltage , but what about the output current, have you measured how much current can be witdrawn from the system. it seems it uses 800ma current, can it supply current of 1 to 2 ampere? Have you measure output current any time?

[@accelerationunderload7188]

Is it an overunity device? Where can we find more specs of components and wirings? Thank you btw

[@NoooneyDude]

What kind of torque would this have? Will putting your finger on it stop it?

[@avoleoo]

Thanks for your comments guys, there is no over unity, it's just a project I enjoyed building. It looks neat because every part was made on CNC, I build CNC before I build this, lol

[@pasimakila6567]

Your ball bearing makes a lot of noise. Why don't you build Thane Heins transformer instead ?

[@RobertHarrisMIB]

I would have liked your video if you gave an explanation on how you built it

[@richardb.5856]

Hey I have a couple of questions about your motor. I'm working on a pulse motor but there are a few things I don't understand. 1. does your coils get hot? 2. if not how do you prevent them from getting out? 3. Are those voltage regulators or transistors connected to your coil? I have a couple more question but lets start with these.

[@OWR_Mission]

I wonder about the magnet wheel you are using. did you make that or buy it? I'm interested in finding one like it. This is very well done, btw. good work!

[@acrophobia123]

hey GREAT WORK! I was wondering if you could tell me some stuff about your motor. I am working on a project very similar and was wondering if you are noticing more output than input? You say you are using 800 Ma what are you getting out? I know I am inputing 500Ma and getting out 1 Amp

[@mattauro]

Hello, performans good and sound good. compliments. I see that each coil has its own transistor and trigger coil You can have the wiring diagram? the engine will recharge the primary battery? has thought about using the hall sensor? Hello and thank you Mauro

[@jpopelish]

So, using power from an AC adapter, you are spinning a rotor around and charging a battery. The battery would charge even better, if you didn't waste energy spinning the rotor. Just build a little pulse circuit to fire the transistors, instead of using the rotor to perform that function.

[@paulratzlaff9359]

if you could send me a schematic of a pulse circuit I would be grateful. [e-mail] thanks.

[@arkangel8709]

YES,!YES!YES!!!!! FINALLY" SOMEONE WHO SEE'S WHAT I DO,!!! WHERE'S THE ENERGY!!!??????

[@arkangel8709]

@@paulratzlaff9359 you don't need any scamatics, just go to the local hardware store and buy a good brand of a ( Dimmer switch)!! Open it up, look at it, Good, and I'm sure you will be able to see, it's basically the same thing every one on utube is using.!!!

[@luxorasmodeus]

@@arkangel8709 or reed switch! you can do the same

[@arkangel8709]

@@paulratzlaff9359 No, my friend" what I'm trying to say is this" I've been watching videos on KZbin about this type of thing" for a very long time,, and from what I can tell* most Of the guys on utube" that are running" these ( Types of home made chargers") are using system's that are already in the stores some where. Sometimes we no them on sight" some time we have to serch around, and look for it.... But I was saying" don't run AC into a charge set-up,!! Use DC" But run it through a Dimmer switch" and have a way to Control the Volt's. Naturally you wouldn't want to run 120" or 240 AC Through, a small home built, Chargeing wheel.LOLOL!! IT CAN HURT OR WORSE,!!!! SO PLEASE BE CAREFUL WITH ANY Electrical energy.!!!!! PS: I will be happy to help you anyway I can" and we can talk about it if you want" I don't mind helping anyone who is interested in alternative energy.!! Okay" email me if ya, Or Give me you're email, we can talk about things like that get in to it more technical" okay" TTYS. JR

[@iasser2]

The battery is self charging?

[@kevinanderson9243]

I'm building a system and having a problem...I have it narrowed down to my coil. 3 questions...is the direction of coil winding critical? My coil is wound counterclockwise. Does the rotor have to spin in a certain direction only because of the direction of coil winding? And lastly, I used a piece of steel bar as my core for my coil...I haven't seen anyone else use a piece of solid steel. The core is usually made of several pieces of material put together as one core! Is this critical as well? Any advice would be awesome! Thx👍

[@michaeldewinter2847]

Did you ever get an answer to your coil question? I acquiring parts to build a Adams motor and wondering what other metals I can use for the core, being that we have such great loses with iron. Thanks

[@consciousenergies]

You said it yourself, energy is never lost only transforms into application. Like a thought into an action. There is no such thing as free energy because we live in a society that currently doesn't allow anything to be free. Its not our applied sciences that need revision, its a social sciences that need to be applied. Maybe that is just my perception however....

[@gepardmic2407]

Petty you cant sell thise awsome kit, but a question what is the max volt of charge is there on this? or simply drag 12 volt out to run, of a serie on lets say 24 volt -p ---12v-|run output|-12v--- +p charge input.

[@michaelclarke6402]

Get Bedini's book. "Free Energy Generation" Has the schematics in it and you to can be having fun with energy. And it is fun.

[@vidbid1]

How long does the motor have to run before the battery voltage drops below where you started?

[@drkastenbrot]

What is this exactly supposed to do? Discharging?

[@falco442]

Did you use just one battery instead of two?

[@donotwantahandle1111]

Wow! What rpm did you achieve?

[@ElGatoLoco698]

Bedini says you can charge a bank of batteries at the same time using a device like this. Is that true? Because that sounds like over unity. Is there such a thing?

[@fidelcatsro6948]

so what's happening? its charging the same source battery with these rotations? I would love to make a motionless version of this charger

[@fidelcatsro6948]

oh I get it ..you using the 12 volt adaptor for source input to run the motor and using its emf to charge the battery?

[@TexMex421]

Bedini motors are great, they do not produce electricity, but they do produce tons of youtube hits.

[@Haniyeganeh008]

wow.......very good.....excelent ....ur system is my favourit .....i like ur system so much.......i have a question ? your motor how much Rate per minutes?

[@H2GenerationX]

That's the AC to DC power source. Bedini's have a Primary *his plug* and a Secondary *his battery there receiving over >12 volts. It would be nice for him to clarify the output of the Wall Inverter. Its most likely as he said * 12v 800ma* . I guess people have to build these motors like I did to understand how/why they work. And they DO work.

[@Authoratah]

if it's not over-unity and you are using it to charge batteries, why not just charge the batteries directly from the 12V power supply?

[@min2oly]

you show the voltage on the battery that is charging. but you never show the voltage or amp draw on the battery or power that is supplying energy to the system? funny thing, when some batteries start out at 13volts they rise very quickly. we have two such batteries. would love to see some follow up on this... thanks for sharing.

[@dalilgiorgi994]

yes! very good hybrid choice! good work.

[@frollard]

I'd love to see this same thing with a true RMS meter to see why the voltage is going up - I can only suspect it's the inductive kickback from the motor, draw high current at low voltage, kick back high voltage low current.

[@randytravis5893]

Can you charge a battery more than you use a battery? That is the question! Please state clearly, do you get more out than you put in? Example. I used 18wat and got more than 18wat out put. I don't mean to be an ass, but I would like a straight answer for once, yes or no.

[@jamesbond5187]

You should pulse it in a Marko rodin vortex fashion and see if it makes any difference to speed.

[@ybaggi]

can you post/link to schematic of you inverter? I'm interested to build one instead of buying. thanks

[@MrCrazzzyvids]

do you have a video that talks about making a electro magnet or the pusling magnet thing to move the rotor?

[@Donno191]

is that device charging the battery ?

[@xanderlander8989]

what you show is an increase in voltage...electrical energy is measured in watts. watts=voltsXamps. so where are the amps, or current draw?

[@ben8090]

Is that a 12v battery ? I always thought that charging it with more than 14v damages the battery?

[@josephdupont]

only when it is fully charged.

[@ROADSTER29]

Sounds like the phat yes phat xbox 360 when loading up a disc. LOL😄

[@adandridsr]

Very nice. Would you be willing to share your schematic?

[@baticadavinci3984]

I don't know.

[@Mrinfoone]

what parts are need since you don't sell them any more.

[@avoleoo]

Thank you everyone for comments, at this moment I can't sell it anymore :(. Self cost for this device was 150 - 200$. mattauro: I don't have wiring diagram, just plans for CNC, which are 100% produced by me.

[@tonyrebeiro]

Can you please tell me the specifications of your generator coil. The core dimensions and the winding details like number of turns and wire gauge. Thank you.

[@voodoo2337]

1 mine do 2 if they work all the time the rotor breaks up and its hard to find the parts later :D 3 voltage regulators? do you mean resistors or diodes, transistors for the coils!

[@VasileStefanPopa-co3is]

22 1 24 How much USD per unit is your price ? How many can you sell per month ? How many kwh is generating per 24 h ? Thank you !!

[@ybaggi]

thanks and how does the ac/sine wave get generated?

[@boyetz88]

Can you show me the schematic diagram of this? I want to know how your design really works..thanks..

[@Sunktor]

Turns well. But where are the two wires at the bottom right of the screen? ;)

[@geoffphuketInPhuket]

I was almost a believer - until you unplugged the real power source.

[@skycollection]

Do you have the circuit diagram for us...?

[@gepardmic2407]

Cool i did a impulse motor by accident to, "impulse motor lego" a twin coil but so far i ges its charge whit lower energy then the power surply give. Hope you injoying my video on youtube :)

[@iphonequalite]

Bonjour,est il possible d'avoir le plan du circuit électronique pleaseMercicordialement

[@DavidB-vh4hg]

hi could i get a copy of your circuit. I'm just starting out and want to learn. Thank you

[@JJ_Curtis]

Oh, great. Can I get basical principles and blueprint ???

[@jasonsweet228]

maybe its possible to power an inverter with it and see if the magnets don't slow down

[@ScalerWave]

Very nice

[@andreibahin1]

под нагрузкой 12.91 в-это заряженный аккумулятор и это нормально что за секунды он вырос до 16.50,надо аккумулятор разрядить до 12 в и после заряжать...

[@bigdogbigben]

12volts 800mah in 16ish volts out but how many amps? Without knowing how many amps are on the output it demonstrates nothing.

[@foxabilo]

Apart from gravity probe A & B the hard disk is the most perfect circle man has created, that one got up to about 5% of its top speed, #1 cover the disk so no air introduced, #2 pump all that nasty think air out in a bell jar and pump. He is not showing an increase in voltage purely that measured at a single phase of a multi phase device, get all the wires unplugged apart from the multimeter, you will soon see it slow down. I realize this guy is not attempting to show over unity. Onlookers do.

[@DanielReyes-rd3ci]

good day sir.. i would like to know every parts of this disc that have six magnets. it will help to my experiment , please respond to my comment.

[@mrstanlez]

Hi, can you show us the circuit ? Thank you, nice device. Stanley

[@jasonshuyler1846]

Look up Amplifier to Inverter but, its really just an Amp. with 12v going into both speaker inputs and main source of the Amp. and a Transformer on the speaker output. Be careful you are playing with a lot of power depending on the Amp.

[@wariossovi605]

de que calibre es el embbinado de las bobinas y como es su conecion.

[@quantumleap359]

mar cherlis No solo eso, esta cosa energia RESIDUOS!! Solo tienes que utilizer el cargador para c argar la bateria maldita! Funcionara major!

[@jasonshuyler1846]

I'm not sure if mine is sine or square but works with what I use it for. Mostly power tools. I believe that an inductor in there somewhere should help. and I believe that most Amps already have 1. I could be wrong on the last 2.

[@b3poj2d2]

seems like you could build 10 of them,link them together in a circuit and power a electric car w/o so many battery's

[@kijungkim7413]

Dear So, surprise your stuff. if you can i want to buy it from you. please let me know your answer asap. really your stuff is good. thanks

[@KennTaylor]

beautiful!

[@jagdtigger]

"There is no such thing as free energy because we live in a society that currently doesn't allow anything to be free." Nope, its simple physics. Every machine has little specification called efficiency. This depends on a wide range of things. The transformer has the highest with 90%+. The generator and the electric motor is about 60-80% i think. But this thing is home made so it can be more worse. Based on this i'd say this thing is not generating electricity...(even if it does, its not usable)

[@chrisbarber7291]

Can you post the schematics for this circuit?

[@TexMex421]

BATTERY !!! COP32 +. Well why didn't you say so. That proves it. And you are right When I watch every video on KZbin of a Bedini motor and it's just burning the energy in the battery, it is obviously the fault of the guy measuring in the wrong place. Uh one question, 32 times more output than what?

[@jainvibhore1997]

what is its rpm?

[@tazznl]

Why are people talking shit like "this is fake", "I almost believed you", "until he unplugs the real power source"?? He states it is just a simple pulse motor inspired by the alternative energy stuff. He never states this thing does over unity... You can use a motor/generator combo to power all kinds of stuff...

[@TORONTOSAURIO1]

increible¡¡¡

[@geoffphuketInPhuket]

Watch from 4:18. He unplugged the power adaptor from the mains supply. lol

[@3verionok]

hy,can i buy it?

[@EVriderDK]

And the purpose of this video is?

[@randostiler9340]

your stator rotor gap too big 1.0mm and you don't have mild steel cores in your stator coils and you are not pulsing your coil with hv dc try u will be surprised

[@MrJetjoe]

another cheep way is d/c moter car alt. will run 40hours only takes 1 hour to charge batterys.

[@foxabilo]

why not just use the 3-5 pole motor already inside the hard disk, get a barracuda 10,0000 RPM :)

[@Mr13216332]

i would like to make it, ist possible to get teh drawings

[@AslanPaw]

This should go in laptops... A more silent version.

[@edwardhernandez613]

You didn't follow the 90 degree coil configuration.

[@kimoyaian]

Nice work sir, can i have the circuit diagram.... thanks a lot...

[@AugustoGuerrero__Main__]

Pure voltage.

[@Mrinfoone]

Can send me a diagram or send info on how to build one myself..thxs

[@quantumleap359]

Crazy? Yes, CRAZY! And doesn't add one erg of energy, but instead, wastes power! Isn't that amazing?

[@cobra1490]

+Quantum Leap why be a hater? do you WANT this to not work? it's closed minded people like you that keep the status quo the status. if you can't help, how about pissing off?

[@quantumleap359]

cobra1490 Just because you are uneducated and naïve, doesn't mean I should piss off. Why don't you learn some basic physics, and basic electronics, then you will UNDERSTAND that these scam bedini contraptions will NEVER, NEVER, NEVER create one erg of energy. Or, you can continue to be a gullible dumbass, and believe anything posted on youtube.

[@cobra1490]

I'll put my Ph.D. in Physics against your G.E.D. or whatever you have any day. And there was a time when everyone thought the earth was flat. Do you believe that also? That the earth is flat? I bet you do. Don't be embarrassed. Lots of people are ignorant. You have lots of company.

[@cobra1490]

Ha ha ha... Fantastic. Now I'm a liar as well as ignorant. Too much. Man, you made my day. I'm laughing so hard right now... But seriously, you do think the Earth is flat, right? Don't be ashamed. Ah, I remember my first beer. Good stuff.

[@quantumleap359]

cobra1490 Did you check out the link? Or are you too embarrassed to admit you were fooled? You should be ashamed, so dense, and with a Ph.D and all, lol. Tsk tsk tsk