Pulse motors are a class of brushless motors and are easy to build. Here we show you how to make one.
Пікірлер: 123
@kengamble85958 жыл бұрын
Demonstrations like this are very helpful for explaining things for some of us and will bring up other questions and ideas which will bring up more questions and ideas ! I believe this is what gives us our amazing technology ! Thank you sir for your time !
@ludicscience8 жыл бұрын
Thanks!
@momasadicleyasq28177 жыл бұрын
Ken Gamble º
@chemistrygroup94317 жыл бұрын
Ken Gamble yes
@MaShaL22117 жыл бұрын
حساب طريقة
@grain-diose7 жыл бұрын
Yes, it's a good product, but it's not a pulse motor. :)
@jeffiscool18056 жыл бұрын
You are very good at explaining things. Thank you for keeping things simple. Good job.
@michaelmartinez3648 жыл бұрын
Awesome video! You explain things really well.
@grain-diose7 жыл бұрын
This is not a pulse motor, but the product is beautiful.
@Misfitswitch8 жыл бұрын
Great vids. Thank you for explaining how everything works.
@ab_ab_c8 жыл бұрын
Well done! The only other thing I would add to improve your vid a bit more would be to provide details about your power supply (e.g. V, A, & how/why it fluctuates as the motor spins up). Thanks for sharing!
@ludicscience8 жыл бұрын
Thank you
@peckelhaze69347 жыл бұрын
A simple brushless motor. Very clever.
@eitan718 жыл бұрын
i love this channel :) thank you for sharing !
@ludicscience8 жыл бұрын
Thanks!
@Ncky8 жыл бұрын
I connected pull up resistor and 12v to jack and it works like a charm. I had removed it with its chip near coils and i looked at datasheet for chip i conected 12v and pull up resistor on pin for on off and it works nicely at about 1500rpm
@xgenesys8 жыл бұрын
Your videos are simple and welle explained, it s really pleasant to watch. What s your accent?
@davidbolha6 жыл бұрын
Hi, If you'd added a Full Bridge Rectifier (AC symbol wires) on the leads of the Magnetic Reed Switch, then used the exit DC leads from the Bridge Rectifier & attach those to a VRLA/SLA AGM battery that is heavily sulphated, you would have a nice desulphator device that could rejuvenate your old UPS batteries. 😋🤓 Doug Konzen discovered this. 🙄 I also have 2 videos on that on my channel as well. 😉 Other than that, nice setup. 😄😆😎
@thebeststooge8 жыл бұрын
That machine is from the late 1970's as my friend's dad had one like that back in 1979/1980.
@kocnn8 жыл бұрын
Great video and explanation thank you,
@alchemy14 жыл бұрын
The only problem with this type of hook up is one needs high voltage, lots of turns of magnet wire, extra amps and hardly any rpm at the end. Might make for a better induction type of motor maybe. The bearing is definitely of high quality. Maybe a person could use it and use plastic or wood as drum with the magnets. That might throw some good RPM.
@sparkfishes Жыл бұрын
How did you wind the coil? Does it matter if one winds it by hand and you get a pile would d coil...viz not a neat coil ?
@tonykuli8 жыл бұрын
Pretty Lucid Ludic!
@ludicscience8 жыл бұрын
:D thanks
@RixtronixLAB8 ай бұрын
Nice video, thanks :)
@daveandrews66703 жыл бұрын
This looks perfect for me, if it wasn't pulsed, it wouldn't work would it, magnetic lock right. I,m a learner and have a VCR spare. I want to increase the rpm,s, would more power do the trick. Or add a another coil. Or is it more complicated than that. Thanks
@fede1428578 жыл бұрын
Would it be correct to say that this is the same type of motor that can be found on a quartz clock movement? (although controlled by an oscillator instead of a reed switch, in order to mantain a stable speed)
@MrPopalosus8 жыл бұрын
Pretty damn cool ! I must have 30 of these motors laying around. If you doubled the amount of magnets, would the RPM's double ?
@ludicscience8 жыл бұрын
Thanks. No, for more speed you need a stronger solenoid.
@kengamble85958 жыл бұрын
+Ludic Science Would more magnets give it more torque ?
@hantzu16756 жыл бұрын
Ken Gamble I think yes, because the inertia would increase and hence the moment of inertia will increase which can be regarded as a sort of torque
@edifierbass78216 жыл бұрын
yes i've seen some demo same like that except they uses a neodymium magnet on four sides or more acts like free energy
@stvrob63208 жыл бұрын
yoo can fine tune the timing of the coil by adjusting the angular position of the reed switch.
@soltake6044 Жыл бұрын
what maximum voltage is your reed switch ?
@soltake6044 Жыл бұрын
I made a bedini generator and the back EMF tends to make the reed switch stick...
@willy18qc6 жыл бұрын
Do you need to run it at 30v ?! Will it run at lower voltage ?
@englebertsingco59276 жыл бұрын
please tell me.what diode are u used for electro magnet.FROM PHILIPPINES.. THANK U
@josephjackson35024 жыл бұрын
You would have the same effect with the magnets and the coil. I cannot see what you achieved here.
@awangkumohamaddanishbinawangja Жыл бұрын
he achived efficiency for building a pulse motor
@awangkumohamaddanishbinawangja Жыл бұрын
and it's for educational purposes
@samj10128 жыл бұрын
thumbs up..if you add 1 transistor bedini circuit you can have a free energy motor..did you try?
@ludicscience8 жыл бұрын
+Sam Jas there is no such thing as free energy.
@samj10128 жыл бұрын
+Ludic Science I respect ur opinion but I disagree ..Google bedini or Tesla and try.or simply try the free plans on this website..you can power your house and your family happy for free..no bills and no power cut: www.free-energy-info.com/DonKelly.pdf
@rushijariwala18406 жыл бұрын
Can this system create free energy? How much is the input power needed to make the electromagnet? Can't the motor generate more power than that? I am just curious as to why it cannot generate free energy.
@ludicscience6 жыл бұрын
+rushi jariwala it is very simple: it is forbidden by the laws of physics
@rushijariwala18406 жыл бұрын
I wanted to know how much does the electromagnet consume? And how much can the motor can generate.
@juniorperry87572 жыл бұрын
Hi, good job, buddy!!!.,... PS: Taken off the bottom disk, & try running it, without it., YOU will get better speed.
@karandeep-jv9bm7 жыл бұрын
i did not understand that how the motor switch is on and off automatically
@budhiprasadnautiyal15498 жыл бұрын
thanks
@karvakferenc5 жыл бұрын
What is your first language?
@reparalcd3 жыл бұрын
Español
@chuckwh606 жыл бұрын
How the magnets work thru all that aluminum thickness when the armature is under what your telling us.the cap underneath has the armature & a full magnet.why deceive us because I have a VCR Head I recently pulled out?
@computerinfo50068 жыл бұрын
Interesting & good
@ajanki348 жыл бұрын
I'm sorry, but something is lost on me. Why is the electric motor underneath the rotor with the three magnets there? Why can't you demonstrate this pulse motor "without" the electric dc motor underneath the top rotor with the three neodyne magnets attached to it?
@ludicscience8 жыл бұрын
Yes you can do that: kzbin.info/www/bejne/d2PCqqmker-Erdk I just used the motor as the rotor part
@jagadhariseno6 жыл бұрын
The coil should be attrack then switch off for better rpm
@RitikKumar-je4yc7 жыл бұрын
Intresting videos
@breezetix7 жыл бұрын
Interesting... the first comment on the first video ever
@gabrielvieira65297 жыл бұрын
I NEDD HOW TO CONVERT PULSE MOTOR TO A.C. MOTOR PLEASE
@sshakir19917 жыл бұрын
how to make solar penal
@volt8978 жыл бұрын
70 amps?
@ludicscience8 жыл бұрын
+volt897 milliamps
@chemistrygroup94317 жыл бұрын
hay I cannot see the switch turning
@euvo_sound4 жыл бұрын
Its so small you wont even see it moving.Search for its animation in google
@peterhalleffect2.04 ай бұрын
the faster the rotor spins the lower the amp draw.
@こま実験小僧8 жыл бұрын
マグネットスイッチは利用価値が多いな!
@rodylopez17955 жыл бұрын
Puede poner el.esquema
@nilaksh0077 жыл бұрын
I did the 999th like !
@กิติชัยกิจสมัย-ม1ฅ6 жыл бұрын
ดีมากคับ
@TheOswald428 жыл бұрын
3:55 listen to your video carefully there's strange sound in the background
@ludicscience8 жыл бұрын
maybe my neighbors
@alchemy14 жыл бұрын
@@ludicscience I turned the volume up. No strange sound here except the hiss of the loud speaker
@sshakir19917 жыл бұрын
own
@0believeinjesus92 жыл бұрын
gods son christ jesus died on the cross for our sins so that by believing in him we can have life...belief in christ jesus be a free gift from the father, given to them [ through thee hearing of heth words ] whom he hath chosen for salvation
@deepaklal1292 жыл бұрын
Please explain in Hindi language
@KingofHearts678 жыл бұрын
Taco meter
@Sean-sp9jp8 жыл бұрын
first meh..
@volt8978 жыл бұрын
ah ok
@sskmmk11077 жыл бұрын
,
@redmosquito504 жыл бұрын
join ME. EMFE .. Engineering of Magnetic Force Engines FACEBOOK
@electronics39928 жыл бұрын
bad copy of my motor
@ericmorrison11338 жыл бұрын
Fake.....I can see the circuit board underneath the motor.
@electronics39927 жыл бұрын
Eric Morrison idiot watch my video if u dont belive how it can be fake lol
@AngelusMortis10008 жыл бұрын
Try smacking on an AC current in the solenoid that changes direction with the frequency of magnet rotation(120 degress). That should change the magnetic field periodicly which switches between attraction and repeling the neodymium magnets. That being, ad a current direction switch a little behind the magnetic switch. In thought, the faster the motor turns, the faster the AC current should switch.the added attraction might improve the speed. I think that you would need an(or 3) extra magnetic switch and two transistors in parallel, so that it govern the direction of the flow of energy.I think that migth be an AC motor. Solenoid pushes a magnet away from the wire, turns of, switches on current in opposite direction, turns of, begins anew. - You might mess with radio signals though.
@TaxilunarTM8 жыл бұрын
You have created an engine out of what you suggest. You could have used any bearing. I would like to do in fact, the engine.
@ChuckRage8 жыл бұрын
This video was very easy to understand! Thank you for your interesting content.
@ludicscience8 жыл бұрын
:)
@juistian7 жыл бұрын
Simple construction and well described. Outstanding!
@ludicscience7 жыл бұрын
Thanks
@sterlingmmattiaputty103513 күн бұрын
Greetings, friend, I want to ask what used motorbike that is. do you use?
@knack2758 жыл бұрын
in the next video can u tell us how to make buck converter
@cristianmarquez6629 Жыл бұрын
Hola, cómo se llama tu canal en español ?, Gracias !!!!!!
@kevinanderson92436 жыл бұрын
Are the magnets all North facing?
@ludicscience6 жыл бұрын
Yes
@yesno-eo3jh8 жыл бұрын
thank you very much
@YaseenExperience8 ай бұрын
❤❤❤❤❤👍👍👍👍👍👍
@tooterplumber11287 жыл бұрын
NICE VERY NICE.THANK you for posting videos like this one.
@diymetric97928 жыл бұрын
+1
@ericmorrison11337 жыл бұрын
Sorry ....I thought you were making a magnetic motor with no battery required to run it.I wasn't paying enough attention.
@FVA-vq9cx7hr9i8 жыл бұрын
Спасибо. Хоть и не понял ,ни слова. По жестам и видео все очень понятно. Большое спасибо. А если добавить еще катушек, мощность возрастет ,в 2-3 раза
@travismoore78495 жыл бұрын
Would it be possible to use a self blinking led that used avalanche breakdown to pulse itself?
@jasinere357 жыл бұрын
did you mean the head assembly for the Betamax model
@MuhammadYaseen-vx5hw7 жыл бұрын
you are teaching very well, thanks you too much brother.
@indrawanarifianto38558 жыл бұрын
can you send a schematic for this project?? thanks
@freedomphiliplachica54146 жыл бұрын
what happens when there's no diode attached??
@aramt43963 жыл бұрын
Very simple explanation thks
@2008dio6 жыл бұрын
now i understand thanks
@thomasslack13287 жыл бұрын
If you have more magnets or you get a faster RPMs and where can you hook up a generator to it to make it self-sufficient
@gagemitchell83746 жыл бұрын
Thomas Slack how
@johnlozada86236 жыл бұрын
Hola desde Colombia: Una pregunta, tu fábricas los carretes para las bobinas, o donde los compras por favor. Vale, gracias.
@ludicscience6 жыл бұрын
Los hago
@cphVlwYa8 жыл бұрын
Wait, that pulls 75 amps!?!?! Its not very efficient for 400 rpm lol. It's still a coll project though
@ludicscience8 жыл бұрын
+Yextus miliamps. 0.075 amps
@cphVlwYa8 жыл бұрын
Ludic Science That makes a lot more sense lol, I was wondering why those wires didn't start smoking and how your supply could handle that but the meter said A so I assumed it was in amps. Anyway, I loved the video, I always check out your channel when I'm in need of inspiration :) so thank you
@ludicscience8 жыл бұрын
:D
@Zodliness6 жыл бұрын
Using a hall effect sensor would give you faster switching, the reed switch has mechanical limitations and will suffer bounce at higher switching cycles.
@sparkfishes Жыл бұрын
I have made several pulse motors with Reed switches and they burn out using 12 volts supply; the contacts weld together may be it was the back EMF ....that's why you added the reversed diode