That's my design and it's kinda cool to see it in someone's video. I'm glad it's working well for you.
@Monocure3DProTips2 жыл бұрын
Awesome Design!! Thanks Jason. We just bought a second machine and we will do the same mod.
@johngrouse54872 жыл бұрын
Just like to add that we found that you need to set the hotbed / rear plate to their lowest position. If you don't, when printing long models, the rear of the belt will have a downward angle and cause the model to shift downward as it comes of the belt. This will cause the model to split open. Having the plates under the belt in their lowest positions ensures the part is level all the way along the belt. Bit more effort getting the nozzle gap right but I see it as essential for long models. Even if you install the rear rollers, the model will dip down before it catches the first roller.
@johngrouse54872 жыл бұрын
Also, I suggest tightening the belt a bit after doing this as the looser the belt the more chance that shrinkage will warp the base of the model. This also requires a recalibration of the Z steps.
@deftdawg2 жыл бұрын
Interesting, I'm planning to do this direct drive mod at the same time as GridSpace's Linear Rail mod (kzbin.info/www/bejne/e2i2gJ-AeNN_e9k), with his mod, the belt needs to be raised to it's top most position, with this one lowered... Guess they will balance out somewhere in the middle with both applied. It's going to be a challenge for me to figure out levelling the belt.
@Monocure3DProTips2 жыл бұрын
Thanks John.
@ryanwillis73832 жыл бұрын
I recently started using the cr-30 , I found test prints have worked perfectly without error, however the thundercats sword I have recently been trying to print continues to give me issues, as soon as it gets to the handle section it wont catch the bed. I was able to get 2 clean prints but every print between just foiled!!. Today I started doing parts for my ironman suit. first couple attempts no adhesion, I then gave in and added glue, this gave adhesion to beginning of print hopefully when i get home it will be printing a good piece!!
@Xploit662 жыл бұрын
How has it been for you the last month or so? I’m still on the fence on the cr30.
@Monocure3DProTips2 жыл бұрын
We just purchased a second one!!
@MTNDEWGANG Жыл бұрын
So glad i found this video, been on the fence on getting one, but with this conversation, i can definitely do some cosplay prints
@kljw66 Жыл бұрын
Hi, great upgrade, can you provide link to additional cables?
@arbjful4 ай бұрын
Is the Cr30 good or the Sainsmart print mill?
@natsariat4302 жыл бұрын
Nice!
@Monocure3DProTips Жыл бұрын
Thanks!
@AlekGora Жыл бұрын
Link for printer setting does not work anymore, does this mod require big changs in the settings ?
@leroyvoyles Жыл бұрын
Is there a link to purchase the extended cable you used for the extruder motor?
@arturopezzi2138 Жыл бұрын
it's been a few month hoping you answrer did you change the hotend also or it the stock one ?
@Monocure3DProTips Жыл бұрын
Stock one is ok
@djmuedeАй бұрын
Hi :) Can you tell me your e-steps?
@prophet16222 жыл бұрын
Спасибо
@Monocure3DProTips Жыл бұрын
No problem!
@rolo1632 Жыл бұрын
Where can I buy the filament runout sensor cable?
@rolo1632 Жыл бұрын
Im still waiting for an answer
@Monocure3DProTips Жыл бұрын
EBay
@kljw66 Жыл бұрын
@@Monocure3DProTips can you poost link?
@henrystofferahn1313 Жыл бұрын
Just a thought and point of view, anyone who maybe thinking of getting one of these, again just my opinion open the box from the bottom of the box, 👇
@Monocure3DProTips Жыл бұрын
Great point. We have started doing that with our latest videos!