Creality K1 Max - XL 3D Printer - Review

Amazon Links
Buy K1 Max: geni.us/ZuQEAX
Buy K1: geni.us/wL7qCE
Hyper PLA: geni.us/BkPoJZ
Recommended: geni.us/JustVlads
Creality K1 MAX 3D Printer with 600mm/s Printing Speed 300°C High-Temperature Nozzle Direct Extruder Hands-Free Auto Leveling
SPEEDY
The Creality K1 Max fastest 3d printer desktop upgraded motion system for 2000mm/s² acceleration and up to 250mm/s (5 times) printing speed*. Each X/Y/Z axis is driven by a high-precision stepper motor. A steel transmission shaft to connect and sync the two Y-axis belts. High-torque Y-axis 42-48 motor for responsive and precise motion.
HIGHER EFFICIENCY
The Creality K1 max all-in-one 3d printers slashes printing time for all types of models. Higher efficiency and less power consumption.
STAND FIRMLY TO PRINT QUALITY MODELS: An all-metal cube frame goes with the classic Cartesian structure of the The Creality K1 Max 3d printers for home use. The stability is enhanced by thick linear shafts, extra gussets, two cantilevers, and silicone bed mounts.
HIGHER SUCCESS RATE
The High-speed printing 3d printers Creality K1 Max can reach 100% success rate for 1,000-hour printing at 250mm/s high speed and 0.2mm layer height.
DIRECT EXTRUSION
The The Creality K1 max fastest 3d printers desktop, the fastest 3D desktop printer all-metal "Sprite" direct extruder features dual gears of a 1:3.5 gear ratio. It delivers a powerful and uniform 80N extrusion force. Way better when printing with flexible filaments like TPU.
HIGH-TEMP PRINTING
Titanium Alloy Heatbreak of the The Creality K1 Max all-in-one 3d printer Low thermal conductivity for blocking heat creep. Able to tame up to 300℃. Corrugated Heatsink: 2.5 times surface area that is rapidly air-cooled by a silent axial flow fan. Large Melting Chamber: 50mm³ melting chamber surrounded by a large 4000mm³ heater block.
COOLER MODEL
The special "Urus" of The Creality 3d K1 max 3d printers air ducts channel the strong wind generated by a large 5015 fan to cool the freshly printed section directly. The deposited hot material will harden and bond up immediately, thus less drooping or warping caused by overheating. It gives better overhangs, bridges, and more details overall.
As an Amazon Associate I earn from qualifying purchases
Join Memberships to support this channel:
/ @justvlads

[@JustVlads]

Buy K1 Max: geni.us/ZuQEAX Buy K1: geni.us/wL7qCE Hyper PLA: geni.us/BkPoJZ Recommended: geni.us/JustVlads

[@subject8123]

Holy crap, I love your presentation. I wish everyone presented things like you. Straight to the point, all the necessary info just the right amount of fluff.

[@MisterkeTube]

These were a very interesting offering at their Black Friday pricing, but now they seem to have gone up immensely in price - I get the impression even much higher than they were before Black Friday.

[@bogdyy13]

totally agree.. they are way overpriced now

[@matehello0219]

I bought mine for about 760 euro, just u have to wait for it about 2 months XD

[@mikev2066]

In my country it costs 1200$+ 😢😂

[@notchipotle]

I got newer one with K1C parts, it's amazing, just work perfectly out of the box

[@rendez2k]

I have one - loudest printer I own by far (out of 6 others) and much better after rooted (can run things like proper input shaping)

[@Henry-y8d2s]

At 3:28 clearly shows the correct way insert filament into boden tube. He chose to insert it the incorrect way.

[@matehello0219]

I'm still waiting for mine about 2 months but i think it was my best decision. In my opinion, too many people hype the bambu (mainly the bambu) and qidi tech ect., but if you check the price tags and the possibility of modifications, addons, the language of the scale leans towards creality.

[@codyhart4062]

Sweet! Ever try without brim? I’ve never used a brim and never had an issue

[@TheDwilliams1000]

I just bought my K1 Max. Can't open til Christmas though. It's all good though. Can't wait to open it!

[@keithsmodelsandrcs6593]

I'd love the new resin creality printer cause iv never used a filament one im only doing small parts for scale model cars and cars too so nothing big I need to get one with bigger build plate nice review

[@yobtnirp3D]

That intro was cool lol

[@kyleb4327]

When will you have the v3 ke review? You have the best reviews, I'm waiting for it!

[@Raydio6]

I really like these printers.. just trying to figure out which printer to get(been printing for 12 years but I still print on a ancient Tevo Tornado 🌪️ which is still printing very nice) Thinking about getting a bamboo to do multicolor but I don’t like the wasteful approach.. multiple hot ends might be the best bet The prints look great from the k1 mostly Great review

[@ZappyOh]

I just wish they had an option for at least 2 color print ... 2 spools.

[@3D_Printing]

Rabbit multi colour unit

[@duguntvv]

Is there a filament link for the frog?

[@mvincent43]

Can you add links to the prints you made?

[@bogdyy13]

love the teddy bear! can you share the stl?

[@BigzMK17]

Are you going to do one on the new Ender 3 v3 KE?

[@Chocokaylarobin]

how do you get it to print from the back it keeps getting tangled up

[@btekkenyo]

Creality K series are awesome but so much ghosting. Hope software updates can fix that.

[@josefsteiner9401]

no ghosting on my bambu x1 carbon

[@btekkenyo]

I can see that bambu labs printers surface quality is superior. Unfortunately, firm don't send printers to my country (Türkiye) and price is absurd. 1.140 USD for P1P right now..@@josefsteiner9401​

[@officialteamroc]

i have no ghosting on mine

[@matehello0219]

@@josefsteiner9401 And whose care? :D

[@fleisbester612]

@@josefsteiner9401 Twice the price for a similar machine.

[@sparkiepixel908]

Good intro, a great quality video! Well done! Could you / someone give a link to the print in place piston engine? (13 mins into video) i want to print it :D

[@JustVlads]

www.thingiverse.com/thing:6105948

[@inc55]

Any link for the tri color filament for that bear?

[@JustVlads]

Tri-Colors C: geni.us/o19YvfU Review: kzbin.info/www/bejne/ep-baJeCmNWgbrM

[@Firestorm011]

Can u do a review on the ender 3 V3 se

[@3D_Printing]

Add a rabbit multi colour unit😊

[@tabhinton6678]

Bought one. It's crap most inaccurate printer I own. Creality Customer service is so ignorant about this machine that they have no knowledge of how to fix this problem. Do not but one. Remember, these reviewers give fluffy reviews because they get free machines and won't tell you the truth.

[@elsunshine9976]

What's wrong with it?

[@tabhinton6678]

Don't know. Creality doesn't know. It took a month of arguing but I just got the return ticket for a replacement.

[@mattgrill7713]

never used a printer before works great right out of the box @@tabhinton6678

[@gaxon1920]

I think you just got unlucky. Mine has been spot on since I got it two weeks ago. Not saying something can’t happen in the future, but so far so good.

[@BigFourHead]

lol pretty quite..... this is a joke right!

[@Conflict7701]

This printer is absolute garbage I have had nothing but issues trying to even get a half decent print not sure how every one is getting all this great looking prints off this boat anchor.

[@funfun8095]

They're smarter, than you! Easy answer. Why even ask? lol