Creating a WORKING GEAR JOINT in Autodesk Fusion 360

[@TheFusionEssentials]

Happy Monday everyone! Let me know if you have ideas for other gear tutorials in the comments down below! :)

[@robripley]

Awesome tutorial! I'm new to 360 and this was super easy to follow. Consider, clear and not too fast to follow. Thanks!

[@alexanderrozumowski5180]

That's exactly what I searched for... Thanks a lot!

[@reidschumacher1619]

You are definitely on the right track.

[@kennyjun00]

Super helpful Thanks for your work ❤

[@SimonPlatten]

The version of Fusion360 I have is obviously updated (2.0.17710), the As-Built Joint dialog looks completely different, I've chosen the rod and the gear but there is no Position, instead there is Origin Mode, Snap, Motion and Type ?

[@lordegravy2827]

very helpful thank you!

[@foremostslayer7757]

You are osm bro your video becomes very helpful to me👍🥰

[@chrisboland1617]

1. nothing happens when I hit the C++ Version of spur gear. 2. If I hit the other option, i can make the gear but it comes out perpendicular to the grid versus parallel like yours any ideas?

[@rowenthimi6497]

I'm from the future and this video is still awesome

[@楊佑國-g7k]

luv u

[@JiriHolba]

This is a very helpful tutorial. Short, clear, informative. Work on your intro though. I've got a creepy vibe from it and almost clicked away.

[@rcamacho364]

That's what it's designed for; to scare away those who fear the gear.

[@ethaneveraldo]

It would be great if Fusion could simulate the physics and calculate on its own the reaction that will happen when you rotate the gears, rather than preprogramming the reaction like a prebuilt animation

[@Red__Towel]

Thank you so much for making this video ! It has to be one of the clearest , most thoroughly well explained tutorial for CAD work like this . This after searching for hours for some thing I could understand !

[@anasnurfauzan4914]

Guys, I've been looking for a way to link motion between a shaft with a key and an impeller. And after watching this video, I think this is one way to do it by making a motion link between the shaft and the impeller. But can I do it by simply using a joint feature? I've tried that but failed, so I wonder if it is possible. Thanks.

[@jeffbob3282]

men = yes

[@cocktimusprime6972]

very yes. I agree helpful commend

[@jeffbob3282]

thanks for the support

[@getpewdsto100m6]

I agree another W video from The Fusion Essentials

[@getpewdsto100m6]

frfrfrfrfrfrfr

[@quincycz]

Awesome, I would also mention how to get exact distance between gears. It's not really supper complicated. move by= pitch diameter of first gear/2 + pitch diameter of second gear/2

[@oneveryfishyboi331]

yeah i did this even though it wasnt said because i have the inability to do anything that isnt measured properly

[@camnguyen7521]

Dear sir, can you advise me how to calculate tooth, radius on both gears ? thank Sir

[@iyoutome]

Thanks brother, very well explained... Much appreciated!.. I will look for your other videos as I'm trying to replicate the Antikythera clock (for eclipses)... Peace, love and cheer!

[@ashwinb7265]

mahn you are amazing .. your clarity of explaining this was outstanding.. thanx for the video mahn..

[@ozcaninan8958]

simple, clear, great reference. thanks!

[@Blaxolot]

Thank you so much :)

[@DSdvdDS]

Thank you! This was a great tutorial and easy to follow!

[@zenletter]

Lame method. Need to use the pitch diameter tangent to the other pitch diameter for proper shaft spacing. Joint method OK though.

[@Jay.perez1]

As everyone has said, very concise and easy to understand and follow. THANK YOU !!!

[@iyoutome]

Thanks brother, much appreciated... Very well done, easy to follow... Peace, love and cheer!

[@davidfarris1332]

Struggling with this since the latest update that introduced ground to parent and pin. Can only seem to get 1 gear to move regardless of what I do.

[@davidfarris1332]

Ended up needing to make the first pin first and use pin to get them both to spin. Guessing it had to do with the parent being the first gear.

[@lammingmik]

If you look closely at the animation you will see that the large gear only turns 180 degrees and then springs back to zero. Place a datum mark on your large gear, and it will be ore evident that the simulation isn't quite right.

[@waynegretzky453]

good video mate, was very confused when i first started CAD and this helped alot.

[@javis9950]

Today is my first day discovering Fusion 360 and I'm shook.. this is incredible and how easy it is to create such complexity... even for simply illustration purpose's this would be incredible.

[@TheFusionEssentials]

It's a really great program for 3D for sure!

[@cho4d]

8:30 if you already know how to make joints and just want to know how to link motion

[@wwsjs]

This helped me a lot, thank you for the instructional video

[@qozia1370]

use a tangent mate for god sake! fusion 360 are such amatures

[@ArnovSharma]

SUPER HELPFUL! thank you so much!

[@eoinocarroll4742]

Can you do this with multiple gears

[@t3vakfi]

how do you click and drag to spin gear?

[@ambitiousglue3930]

Thank you Sir. You helped me a lot.

[@foxtolfo]

This is what I really want! Thank you so much

[@조성민-n4j]

amazing.... i like your voice. very calm good to listen. im very helped by your videos. thank you so much from korea...

[@PraveenSIngh-xc4eo]

Thanks man appreciate your teaching !

[@kenw8875]

F360 needs to improve the kinematic velocity controls (ie. revolution per unit time, theta = r * omega) in auto-Animation mode. the spin is way too fast, even when adding a small/slow drive gear.

[@elbowbread4393]

This is amazing!

[@barbarafidler910]

I found where the add ins were on the menu bar utilities; the creating new scripts dialog box doesn't ope. ?? not sure why.

[@ELECTRICMOTOCROSSMACHINE]

Great tutorial, very easy to understand.

[@chris009able]

how big would i need to make a wheel to accept 128 teeth for a motorcycle i am designing it will be a sequential dog gear transmission

[@amerging8687]

Thanks to you Please continue this Amazing work 😍😍😍😍🥰🥰🥰🥰🥰

[@oneveryfishyboi331]

just so you know, the sketches that make up the gears already have the hole sketched out, so theres really no need to create another sketch on the top face of the gear

[@amerging8687]

You are amazing Really thank you 🥰😍😍🥰❤️🥰😍😍🥰

[@ywsf8716]

Thank you

[@lennartzdesign2728]

why is it that when i create the motionlink one gear spins and one axis spins instead of two gears?

[@olliebrosch3224]

ello .

[@mladizivko]

I don't have asbuilt joint?

[@tj9382]

That’s awesome, I’ll give it a try. Thanks 🙏

[@granthmehta4999]

Thank you so much man!

[@רםחכמון]

Great video! tnks

[@jagslab]

godly video

[@reycors6871]

thanks

[@OrbitalCookie]

Starts at 3:28 Thanks for the tutorial!

[@wojciechzaczek4729]

THX!

[@enoch7thadam1st2]

Thanks

[@TooSkotch]

Awesome video once again. Looking forward to watching the next one. Thanks again

[@KN1981-k1i]

Excellent video👍. Please can you do a video on gear ratios, i need to make 8:1 meshing gears, large gear 8 revolutions/ small gear 1 revolution, the small gear must have a diameter of more than 250mm. i am testing a magnetic generator - 220v. Will appreciate a PDF print file.