dude.. your videos NEVER fail me.. its always the most specific weird thing I'm trying to figure out and you've helped me countless times. Thanks so much!
@joshmoxey.3 жыл бұрын
This functionality is genuinely incredible. I just ordered Studio today and I'm soooo excited to get the Speed Editor and try all of this out! Great tutorial, brother!
@CreativeVideoTips3 жыл бұрын
Great to hear! I still think it's a lot of fun several months later. Let me know what you think once you get your hands on it.
@tomasnovacek80552 жыл бұрын
Thanks a lot. I had a record from the theater of four cameras, in which the cards were changed, and the easy way to create a multicamera in davinci reported a problem with the connection. But after your tutorial, I'm happy like a flea in a dog's fur. Thanks again.
@davarso3 жыл бұрын
Thank you Chadwick ! I'm exploring the sync bin and I was having difficulty with my audio and your explanation is just perfect for me. I discovered your channel while searching for the speed editor and Davinci Resolve and I will be around for more, that's for sure.
@CreativeVideoTips3 жыл бұрын
Love it. Great to hear David. Yeah I would say the audio synchronization is probably one of the biggest areas resolve could improve for editing.
@MrJemabaris2 жыл бұрын
You just saved my day man! I am a colorist in normal life but got asked to cut a multicam sequence and I really struggled getting everything going ESPECIALLY in the cut page so that I could use the speed editor. Thanky your for this great resource!
@chrisbeemedia40383 жыл бұрын
Hey man, you Rock! Every video gets better and better. Never a dull moment listening to your tutorials
@CreativeVideoTips3 жыл бұрын
Hey ChrisBee you rock! Thanks so much for the kind feedback.
@clarksvideoclub86469 ай бұрын
Coming back to this video every single time I'm editing a live session (cause I forget everytime how to set everything up properly), thank you so much!
@anthonymiles23022 жыл бұрын
I love teh detail and the thinkgion ahead approach in your videos man. This is the best Ihave seen so far on Multicam sync and by far on fixing issues.
@CreativeVideoTips2 жыл бұрын
Much appreciated! Thanks for watching Anthony.
@WADATMEDIA3 жыл бұрын
Broo. Im not gonna swear but you've helped me with an issue that have been plaguing me since i switched to Resolve. THANK YOU!! Plus i subbed too. :)
@CreativeVideoTips3 жыл бұрын
Glad I could help - I'm hopeful that syncing does continue to get better but it's great to know this little trick. Thanks for joining the channel :)
@WADATMEDIA3 жыл бұрын
@@CreativeVideoTips You definitely helped. Im still having issues with multiple start and stop recordings where both angles wont show up in the sync bin area after hitting save it shows when analyzed by audio but not after hitting save. It only shows Camera 1 on a Track 1 then Camera 2 appended at the end of Track 1. They dont overlap/sync in the sync bin. Any ideas??
@richard-sim3 жыл бұрын
wow, mind blown! You're right, there's SO much to learn. I'm going to have to play this back step by step while working on a project (or 10) to digest everything you covered. Thanks!
@CreativeVideoTips3 жыл бұрын
Love it. Hey that’s what’s great about those playback controls in KZbin too. It’s simple to slow down if you need to. Great to hear this is helpful! Best of luck.
@DrWiggo10 ай бұрын
You have saved me many hours of work! Open in Timeline is amazing! ❤ (I wish I had seen this video when I got my Speed Editor two years ago!) Subscribed!
@danhoven Жыл бұрын
I barely have 4 or 5 hours in playing around with resolve, so am quite lost at the moment, but seeing the many things you did in this video makes me want to now find the first video so I can learn all about it. I make piano videos just as a hobby to share with friends and fam, so I record with 4 cameras and then have to sync them all manually since my audio tracks go right to my daw, the cameras have nothing they're recording other than the clicking of the keys. After seeing this though, I'll probably turn on a monitor speaker to use this option and save me tons of time. On recording night, I could have hours of footage but only one worthy take of audio. If I get right into the video editing I'm fine, but I'm now trying to put a video together I recorded a year ago so had I known how to use this it would still be simple. I'm primarily AE CS6 and know it better than anything, but my footage is all 4k so bought Resolve studio 18. Learning all over again isn't going to be fun as in this case with how I found this video. I had followed along another tutorial and tied to use Resolve's sync feature to see if it would match up all those key click patterns, but somehow it go my audio track in the mix and I can't unlock the sync but now I know. Sorry for the long winded explanation, I just type fast. Which video should I start with to learn this inside out? Thanks for this and any recommendations you might have!
@RandumbTech2 жыл бұрын
This was literally the EXACT video I needed! Thank you thank you thank you!!!!!
@ericrobertsmusic3 ай бұрын
I just threw my mouse in the trash…. This workflow is amazing. Great video!!
@Falken207 Жыл бұрын
By far the best video on sync bins I have found! Good job, definitely subscribed and alerted 😊
@Bearleii_Sober2 жыл бұрын
Thanks for making this video. There are some useful tips here. One thing I've noticed whenever I have audio that "sucks" is exactly what you experienced during this tutorial. I don't think resolve uses the manually linked audio at all during the sync by waveform operation. I think it still refers to the embedded audio. Must be a bug I think. Your workaround was great though. I didn't know you could adjust the sync on a timeline like that.
@NKRDBL Жыл бұрын
this video is instantly goes to my saved playlist named "GOLD"
@TimGanderPhotographer3 жыл бұрын
Thanks so much for the tips on this! Trying to sync audio in any kind of multicam setting has been driving me mad. All the other tutorials show you how to work with random stock-like clips or sequences where a separate audio track doesn't need to be kept in sync. Thanks so much for showing how to actually work with real-world footage! Also, seems after your initial review of the Speed Editor, you've grown to like that multicam keypad ;-) I've subscribed and looking forward to learning more from you.
@CreativeVideoTips3 жыл бұрын
You're welcome Tim. Yeah I kind of feel like syncing waveforms is probably the weakest editing sort of task Resolve has in comparison to competing software. But it still can work for sure... It shines in the fact that it supports timecode better than the rest (or at least ties avid). I go back and forth with using and not using the speed editor each week. I probably cut at least 1 sync bin style multicam with it each week and then other days I'll just use a keyboard and gaming mouse or wacom pen.
@TimGanderPhotographer3 жыл бұрын
@@CreativeVideoTips Thanks for taking the trouble to reply, that's really cool of you. My position, as if you hadn't guessed, is I'm a complete newb to video and video editing, so I picked up the Speed Editor (free with the Studio version of DaVinci Resolve 17) because for me it feels like it'll help me learn many of the basics (and beyond) of editing. I can't afford a full Black Magic keyboard and I'll never learn all the keyboard shortcuts, so the Speed Editor should help a lot! And hopefully BM will strengthen that waveform syncing in future updates :-) Anyway, thanks again and keep up the great work, it is appreciated!
@vertusmatjaz2 жыл бұрын
Hey. I've asked you on your other video all questions that you cover here. You rock! Thanks
@CreativeVideoTips2 жыл бұрын
anytime
@moritzspang2 жыл бұрын
Thank you so much Chadwick! I really hope they update the sync bin in Resolve 18 to be a little bit easier to use.
@AjushiPhotography3 жыл бұрын
Great Video! - As a FCPX user, I purchased the Speed Editor with Studio - I am just having a really hard time moving over to DaVinci - even after watching all of your videos - especially since i shot everything in 4K DCI - FCPX just seems much faster.
@CreativeVideoTips3 жыл бұрын
The cool thing is you can easily use both final cut and resolve now. There are so many things I like about both. I think if you use proxies they will both perform about the same but the Mac really does get a nice advantage with the final cut team knowing exactly how all the hardware works best.
@mzdial3 жыл бұрын
I've learned so much from you over the past couple months. Thanks Chadwick!
@CreativeVideoTips3 жыл бұрын
Glad to hear it! Now you can take those tips you know and share them with other filmmakers. Cheers.
@markturner85973 жыл бұрын
Attempting my first multi-cam video today. This is so helpful!
@CreativeVideoTips3 жыл бұрын
That's awesome to hear! I can't wait to hear how it turns out Mark.
@SethBlackMedia2 жыл бұрын
My speed editor came in today (thanks to my awesome boss) and I’m really excited to start using it. Once I get more comfortable with the cut page I can’t wait to see how much faster it speeds up my productivity. One thing I’m curious about is if you use the closeup feature with 4K footage scaled to fit frame size on an HD timeline, does it still retain all the pixel data from the 4K image or does it rasterize the 4K image to HD and then scale up causing you to lose pixel data?
@film42tv3 жыл бұрын
Great stuff! I was really trying to use sync bin, but it just wasn’t working for me. I feel like giving it another go now👍
@CreativeVideoTips3 жыл бұрын
Thanks! I can't argue that resolve does the best waveform syncing the world but this does help give you a little more control for sure.
@CreativeVideoTips3 жыл бұрын
00:00 - How to Fix an Existing Sync Bin 00:35 - Camera Number Metadata 01:48 - Prep Audio Tracks 03:32 - Manual Link and Sync Clean Audio 04:02 - Generate Proxy Media 04:54 - Fix Sync Bin Issues 06:22 - Open Media Sync Timeline 08:43 - Why use Sync Bin and Cut Page? 09:18 - SPEED EDITOR - Sync Bin Tutorial 10:18 - Paint Angles Holding Cam Button 10:49 - Live Overwrite Tutorial 11:49 - Source Overwrite without Timecode ➡️Watch the Full Edited Music Video Here! - kzbin.info/www/bejne/hISucmOsZ7pmi80
@TheJrobert863 жыл бұрын
3:39 I am only showing one waveform. How could I bring up both audio and video waveform?
@FrancescoPaggiaro2 жыл бұрын
Definetly cool the explanation of the Speed editor, thanks for sharing it
@CreativeVideoTips2 жыл бұрын
You bet! Lots more speed editor tips on the channel too. Thanks for watching.
@MotoFamMayhem3 жыл бұрын
This was incredibly helpful and exactly what I was looking for.... Thank you so very much for sharing this with us!!!
@CreativeVideoTips3 жыл бұрын
This is a great to hear! Glad it helped.
@twofoldfilmhouse20372 жыл бұрын
Thank for the great video, I’m just getting into multi cam editing
@StevenWilliamsHome3 жыл бұрын
Brill skills. You make fantastically practical videos.
@CreativeVideoTips3 жыл бұрын
Thank you very much! Hope this one comes in handy at some point for you.
@DivineMisterAdVentures3 жыл бұрын
SHOCKING! However I damnwell fell asleep in that log section of using the cut page instead of the edit page but I dug the sync match in the last part. And I will catch on - looking forward to the rest. (8D>
@CreativeVideoTips3 жыл бұрын
Thanks for you feedback Johnny - cheers dude.
@dariuscitu79803 жыл бұрын
That's awesome! Nice video, keep growing and hope for the algorithm to notice you :)
@CreativeVideoTips3 жыл бұрын
Thanks Darius - I really appreciate it!
@f00tieh3d Жыл бұрын
WOW INCREDIBLE ADVICE THANKYOU!!!
@mavchb Жыл бұрын
Great video, helped me a lot!
@Bearleii_Sober2 жыл бұрын
I've been using the sync bin for multicam and it's been amazing but after watching the updated multicam tutorial on the blackmagic page, I might start using the old method again. The reason is because you can switch between angles in realtime using a mouse and keyboard. Could you do the same on the syncbin without the speed editor?
@Pierluca722 жыл бұрын
Man, you have been extremely helpful! Thank you so much
@CreativeVideoTips2 жыл бұрын
Thanks so much for watching and the super kind comment. Much more to come.
@DarrylSyms3 жыл бұрын
Thanks for the infos! Any idea how I can bulk change an angle if I've painted the wrong one?
@CreativeVideoTips3 жыл бұрын
Hey Darryl - Man this seems like an over site from Blackmagic. I can't find a way to do this other then just "re-painting". The should add a replace type edit function in a future release to solve this problem. If you find anything that works - please do share with everyone on here.
@DarrylSyms3 жыл бұрын
@@CreativeVideoTips that's a bummer! Thanks for the reply :)
@RVKevin3 жыл бұрын
Chadwick, If you ever do another sync bin speed editor tutorial can you do a more detailed sync bin setup ? I realize I am slow at picking some of these skills up. I have struggled at the the step by step process of creating the environment for sync been to work properly. After re watching your video a few times i notice you had previously created a couple of timelines to use in your example and I have been trying to understand what order you used to create a successful sync bin setup.
@CreativeVideoTips3 жыл бұрын
Noted! What is your typical multicam setup of gear? This will help me cater more specifically if it's a common production workflow.
@RVKevin3 жыл бұрын
@@CreativeVideoTips , Lets see. 2 to 3 cameras at most with a video or 2 of Broll to patch in. Sometimes a cooking video with 2 cams and one Broll clip to parse. Audio and video in different bins. B roll in different bin. I started making stingouts, i guess i should stop that for a multicam video. It may just be me not understanding how to setup a proper workflow for multicam, it sure is different enough from building a video out of stringouts of A and Broll alone. I hope this is what you are asking. Kevin
@lerychfotovideo Жыл бұрын
Hi. You really rock! But what is the mouse-like device you are using?
@stever1514 Жыл бұрын
Hey Chadwick, is there any other way to add a video track to a sync bin after the first few tracks have been sync'd? I have a particular camera angle that Resolve refuses to bring in to the sync bin screen. I thought it may be a bug so I kept trying different solutions to get this file to show up in that initial sync bin window but just can't get Resolve to recognize it. I've got my speed editor ready to go and I'd rather not use the older multicam view. Great video, and I appreciate your methods of locking the main audio to. the primary angle and showing the edit view for finer tweaks.
@Sethmotley2 жыл бұрын
Great tutorials
@frwiss Жыл бұрын
Thanks for this!
@kgouvia2 жыл бұрын
This was a Great Tutorial but what if you did not have 3 or Cameras and had to shoot old school film style (one angle at a time). Is there a way to take that B-Roll that was shot film style with one camera and use them in a Sync Bin with the Speed Editor after naming the Camera Angles?
@CreativeVideoTips2 жыл бұрын
In that case I would use the sync bin because nothing would actually be in sync. Instead I would use the place on top command for cutaways of b-roll.
@DKiaulakis4 ай бұрын
Amazing !!! Thanks
@WITELITE3 жыл бұрын
Great tutorial. I will need to go through it 2 more times but exactly what I'm looking to do for mixing band videos from an ATEM Pro ISO. Question - I know you can live switch the videos using the keyboard and pressing the camera number as the music plays to switch angles. Is that doable with the speed editor???
@CreativeVideoTips3 жыл бұрын
Thanks Michael - this is probably my biggest or main disappointment with the speed editor for multi-cam. No you can't do that. You need to rotate the dial to "paint on" each new angle - it doesn't happen in real time.
@MarkHarmer2 жыл бұрын
I think in studio 17.4 you can now do live switching from the Speed Editor in the Edit page
@CreativeVideoTips2 жыл бұрын
@@MarkHarmer yes you sure can! This will probably be the tutorial for next week.
@robh56953 жыл бұрын
I actually just dropped by to say "holy shite, I thought you were StoneMountain64 there for a sec."
@CreativeVideoTips3 жыл бұрын
haha - I can see some similarities. Cheers!
@paulschlesier3 жыл бұрын
Hey, thanks for the useful video. But I'm pretty stuck right now. Created a sync bin with 13 angles and 1 Audio File (Song performance) - edited the sync bin and now when I go to the cut page and press the Sync bin button there's a greyed out field "No synced clips" - how do I use that Sync bin I've created and edited (can open it in the edit tab) and use it as source for my new timeline? I've tried for nearly a hour now and have no idea anymore.. Thanks!!
@paulschlesier3 жыл бұрын
Ok, you described it perfectly fine! My situation is as following: We have a fixed audio (as camera angle btw. because it fits to no video from start to end) and 13 angles (takes) of video performance clips. Key was - like you did in the video, to once set in and out point to the audio file and append it in full on the newly created timeline, then the sync bin key on the speed editor worked and showed me all the angles.. that was a somewhat confusing one. I imaged I can go to a new timeline, choose the Sync bin as a source and then push in my angles, but Resolve needs a fundament that serves as a 'link' to the sync bin so to say. Thanks a lot for your video! Enlightening and sometimes it's good think through twice.
@Graemecns2 жыл бұрын
I have the speed editor and have two or more groups of clips I wish to sync, I sync my first group of Clips no problem but my second group are a day later. Can I have a second Sync Bin if so how and can I use in the same Time line. At present I open a second project and sync the second group of clips once edited I process and import the new edited clip into my main timeline.
@JimRobinson-colors3 жыл бұрын
Not sure why once you build a sync bin that there is no way to reopen it in the Cut page. I think Resolve should have had the option to reopen. I found out about what you are calling the :"hack" because after working on music video, I realized that a couple of tracks were not quite in sync. Was frustrated that it seemed that I couldn't reopen the sync bin and fix it. This tutorial will help others that had that same frustration. Another tip is that when you open the sync in the edit page as you did, if you temporarily unlock all the track, you can grade the clips and then go back and relock them. Then when you drop clip down they have a grade on them.
@CreativeVideoTips3 жыл бұрын
You can right click on any sync'd clip in the sync bin and say "open sync group". However the detail you have to work in this window is pretty terrible currently. Excellent tip about doing color grade down inside the sync layers! Another way to achieve a similar result would be to use remote grades, but options are really helpful. Cheers!
@PVCLime3 жыл бұрын
Great tutorial but resolve hasn't scored a 10 yet with the speed editor and live multicam. The Live o/wr is everything but live. They have made so many functions that are quite nice but live editing a sync bin or multicam is impossible with the Speed Editor. I want to be able to hit play and then just choose the camera i want by hitting "cam 1" or "cam 2" etc while playing. Resolve stops when I hit a camera on the Speed Editor just as you show in the tutorial with the overwrite style of editing. Why can't they just implement real live editing as it's in a live TV studio? Well, in the Edit page you can edit a multicam clip this way with your keyboard, NOT the Speed Editor. I really hope they fix this issue, and if they have I would be really happy to know about it. I've been searching for a while now and cant find anything about it working that way. Thanks for the videos you do, really great work! It's appreciated :)
@CreativeVideoTips3 жыл бұрын
100 percent agree with you! It seems like this would be a very easy thing to implement to give us the option to use those cam buttons to live switch. Thanks for the support and watching. Let's cross our fingers, haha.
@charliecooper30303 жыл бұрын
Hey Chadwick, quality stuff. Quick question if you know off the top of your head. I have two cameras, one with 4 tracks of audio, another with 1. Is Clip Attributes the only way to get the right channel to appear where I want? I can't seem to get the lav audio to show up when I create multicams after syncing with timecodes. I can add new tracks and then mute the first one to ensure that the other track appears on track 2, but every new multicam timeline only gives me two tracks of audio. Any ideas?
@CreativeVideoTips3 жыл бұрын
Thanks Charlie - this is a really solid question and I don't know the answer off the top of my head. In general resolve wants to always have sound on channel 1 in clip attributes for sync, but it wouldn't be a bad idea to mimic the same number of channels in that clip attributes window prior to doing a sync bin or multicam clip with them. I don't know if this answers your question so please go into more detail and lets figure out the best solution together.
@charliecooper30303 жыл бұрын
@@CreativeVideoTips The solution I found was to copy the clips to a new sequence and then copy audio tracks in. For some reason multicamera sequences only go by angle and limit to two tracks. Kind of tedious.
@GaetanoCrisci Жыл бұрын
Thank You Chad
@VAsHachiRoku3 жыл бұрын
Probably not possible, but like to learn by doing! Any chance can provide the files so we can follow along at home with you? Probably not because this is a music video for a customer, but figured still worth asking!
@CreativeVideoTips3 жыл бұрын
Hey this is a great idea and I wish I could, but yeah I don't think this is possible - at least not with this particular bit of media. I appreciate the feedback though and might look into ways to make some files available in a training course in the future. For now - I would point you to blackmagic design's official training because they do have files to play with here - www.blackmagicdesign.com/products/davinciresolve/training Cheers!
@saracenrush2010 Жыл бұрын
During a wedding our cameras need to be stop started due to the 30 minute recording limit. This doesn't seem to play well with Sync at all. I haven't had success with it to date.
@munjidkh2 жыл бұрын
how to replace clips in the sync bin so i can keep the original cuts but with HQ videos or 4K
@TheSlimShaggy2 жыл бұрын
Gos bless brahs
@joelarvidsson2 жыл бұрын
Why cant you throw in all footage in the timeline and have then synced to a long reference track? You can only sync one at the time in the timeline and than you will unsync the first one if you choose the next clip. If you do a mulitcam clip you get this done. But I liked to as a way to sync multiple clips also in the timeline.
@CreativeVideoTips2 жыл бұрын
This is just a limitation. There is a workaround to doing one track per time that Billy Rybka covered very well when this feature a while back. It involves moving audio up and down as you go. Very clever. Plural eyes is something that will be able to do what you're asking.
@joelarvidsson2 жыл бұрын
Will look the Billy Rybka clip. But mean while syncing everything as multicam get its done. But its a tiny work around. But its just on certain projects that I need to have everything lined up to a reference track. But Im gladly have a look at that video and se I can improve the workflow. Thanks!
@derv2063852 жыл бұрын
I downloaded DR version 18 and I don't see the right click option Auto Sync Audio when I right click on my 2 video clips I want to sync. Please help Thanks!
@urwaeid3192 жыл бұрын
I tryed to get multicam from 3 timelines but didnt work ! Any ideas how to get it please ?
@alistercarmichael49905 ай бұрын
This has to be the solution for difficult sync. I have start stop timecode (tod) on one cam and the other is a potato with a different frame rate and a load of conversion drift although it is continious record. Many hours already in trying all sorts to resolve this. A manual line up of each clip on the timeline is the most successful so far but it is too easy to break tracks afterwards. Here goes nothing.
@cinemacola63982 жыл бұрын
Hey man, why isn't Da vinchi letting me sync my audio files? I select the clips with the audio and when I go to sync it up, it is completely greyed out. Why?
@CreativeVideoTips2 жыл бұрын
Hmm. What part is greyed out? Are you syncing on the timeline in the edit page?
@cinemacola63982 жыл бұрын
@@CreativeVideoTips So in my bin, I have my video files and my audio files and I select them all to sync together, but when I right click to try to sync by waveform, it doesn't show up, I go up to clip and scroll down to audio and it is greyed out and won't let me sync them for some reason :(
@Chrispoolroom11 ай бұрын
how to use sync bin when one of the clip is a compound clip ?
@vertusmatjaz2 жыл бұрын
At 8:28 you finished and then jump right into a cut page with an empty timeline. How did you do that? Did you close the timeline? How? When I click the cut page I have already all tracks on the timeline.
@vertusmatjaz2 жыл бұрын
BUMP
@MrJani09513 жыл бұрын
What about animated split screen in multicam?
@CreativeVideoTips3 жыл бұрын
I think the best way to approach this would be using sync bin style editing and then adjust your sizing in the inspector window to taste. Copy and paste attributes will be your friend.
@MrJani09513 жыл бұрын
@@CreativeVideoTips Can you do video about that? i think this will help to many people.
@CreativeVideoTips3 жыл бұрын
That’s a good suggestion. I will add that to the list. Thanks!
@MrJani09513 жыл бұрын
@@CreativeVideoTips Great. Subscribed!
@WrestleStrongDojo3 жыл бұрын
once I have the multicam done with the paint technique, If i want to remove parts in the final edit how do I remove the gaps but keep everything in sync?
@CreativeVideoTips3 жыл бұрын
Great question - There are several ways to do this but it's easiest to do in the edit page. One simple way besides ripple trimming is to mark and in (i) and out (o) and then hitting the delete key (not backspace). This will ripple delete the in and out marks you made and poof be gone.
@WrestleStrongDojo3 жыл бұрын
@@CreativeVideoTips thank u
@vertusmatjaz2 жыл бұрын
Where on this path will you color match the cameras? I have 5 cameras that have different colors.
@CreativeVideoTips2 жыл бұрын
I would generally do this after an edit is complete. When you're using sync bin it is worth starting using what are called "remote grades" in the color page. What this will do is apply the same correction to every instance of the same clip on the timeline.
@vertusmatjaz2 жыл бұрын
@@CreativeVideoTips Ok thanks. So I have few days until I'll make grades. Do you have any video already that you explain "remote grades" ?
@YosiOren3 жыл бұрын
What if I need to edit music video with 15 singers to align on time line. How to use speed editor to switch between more then 9 cams ?
@CreativeVideoTips3 жыл бұрын
Hi Yosi - you will have hit a limitation of the tool at that point. You would need to click angles manually on the screen - similar to if you were doing a traditional multicam in the edit page and in fact I would probably go to the edit page for something like that personally.
@YosiOren3 жыл бұрын
@@CreativeVideoTips that is disappointing, I just ordered the speed editor today while already have studio license. Hope next project would be less disappointing.thanks for the reply.
@tonyyaacoub43442 жыл бұрын
hello dear is there any solution if i have more than 9 angles ?
@CreativeVideoTips2 жыл бұрын
I know it sucks, but you’ll need to click the angles with your mouse to switch.
@blackandbrownmovies3 жыл бұрын
So I've watched this video multiple times and even used manual synch on other projects when davinci didn't find audio waveform match. But today, manual synch isn't working for me. Idk where i've gone wrong. I'm on the media page and made markers on both clips but it's not synching from my marker points. what am i missing 😩😩😩
@blackandbrownmovies3 жыл бұрын
oooh it's where the play heads are, not marks!!! SMH. the stress! lol. But thanks again for these! I'm leaving my comment up incase someone else has this issue.
@CreativeVideoTips3 жыл бұрын
Ah yes - glad you figured that out - i wish it could do both with a priority for i/o marks - Nice job!
@christophmuller35853 жыл бұрын
When I sync the clips in the Cut-Page with this sync-button and open them in the Timeline, It is not possible to RENDER my clip. But without the Sync-Clip (and without automatically synced clips) it is no problem to export. Where is the mistake???
@CreativeVideoTips3 жыл бұрын
Hmmm, this must be some sort of bug - I haven't experienced this issue yet. Are you able to reproduce it with different footage? It doesn't sound like you're making a mistake.
@VideoPine4 ай бұрын
Still no live switch?
@spookyloops35773 жыл бұрын
What if i have more than 9 angles?
@CreativeVideoTips3 жыл бұрын
I would suggest using traditional MultiCam editing in the cut page for that.
@KezhAndre3 жыл бұрын
👏🏻👏🏻👏🏻👏🏻👏🏻
@ruberto_inc2 жыл бұрын
Why do my clips end up taking up 20 cameras ?? it's just A and B cam... how do I fix this?
@CreativeVideoTips2 жыл бұрын
great question, have you tried assigning camera number or angle metadata in the media page first? usually that will take care of that issue.
@ruberto_inc2 жыл бұрын
@@CreativeVideoTips I didn't but I will definitely try assigning camera's next time. I just ended up fixing it on the timeline which also worked! (took some time but we're rolling!) Thanks for such a quick reply though, your videos are superb
@CreativeVideoTips2 жыл бұрын
@@ruberto_inc yeah that can be a pain, for sure assign that metadata next time and that should really help. I'm an open book and try to respond as much as I can so never hesitate to use the comments.
@PrabhatKumar0033 жыл бұрын
How to use more than 9 tracks in the sync bin???
@CreativeVideoTips3 жыл бұрын
Hi Prabhat - while I don't think I've worked with more than 9 angles in sync bin yet - it should be possible. You just can't use angles higher than 9 with the speed editor. You would need to select the angle from the sync bin viewer to cut them to your timeline.
@PrabhatKumar0033 жыл бұрын
@@CreativeVideoTips thanks 😊
@Beyond-Horizons-3 жыл бұрын
To much manual work I have many time like 5 cams and 200 clips. Use syncailia sofware for this.
@CreativeVideoTips3 жыл бұрын
I hadn’t heard of that software before. I use to use pluraleyes back in the day. Thanks for sharing this!
@Beyond-Horizons-3 жыл бұрын
@@CreativeVideoTips video has helpd me I now know how Ican use syncailia with snycbin
@huyked Жыл бұрын
- Error: Can't generate proxy? "Proxy media failed to generate for the following files" - Solution: Set to 1/4, not 1/16, or 1/8. - Why: The proxy output file can't be TOO small: "Resolve doesn't handle clips smaller than 256 pixels in either dimension."* This makes sense because you wouldn't be able to see a 720p file at 1/16 (there wouldn't be enough detail to make it useful visually). - It will generate a 4K file at 1/16, but a 1080p file, you have to set to 1/4 (or was 1/8 also okay? Test). * Source: Search "Proxy Media: can't generate below Quarter - Blackmagic Forum"
@ricomolden9 ай бұрын
Help Please! I'm attempting to edit an hour long video podcast.. Painting on makes no sense for this scenario because I need to be able to hear what they are saying. I want to like Resolve, and could do this no problem in Premiere.. Thinking I'll just treat it like a good old fashion multicam.
@bigderek072 жыл бұрын
As clear as mud lol
@CreativeVideoTips2 жыл бұрын
It's certainly not the simplest thing but gets the job done.
@johnwaldmann5222 Жыл бұрын
kzbin.info/www/bejne/bZCbfJltjNGrp9E how to fix an unresponsive speed editor.
@DavidRosengarden Жыл бұрын
Hey - your tuts are 2nd to NONE! Thank you! However, I received a confirmation email from Blackmagic directly that they will no longer support (as of v 18.1.x) what you do here: kzbin.info/www/bejne/bX3SipiNf8yGpbM -- In other words, the shortcut keys to move entire clips by SUBFRAME is no longer supported as previous, but now (according to Blackmagic's email) the sub-frame will work only to SLIP AUDIO! Here's the direct quote from tech support at Blackmagic: "The software engineering team got back to us with an explanation. The Slip audio command now operates consistently with other editing operators. Essentially, handles are required for slip operation, be it sub-frame or frame accurate. This will not work on the media without clip handles." This is a DEVASTATING change for us (unless I'm missing what this means and how to overcome the change Blackmagic made with some other way of doing the same thing as you do in the time stamp I've referenced above) as we have no ability to timecode, audio sync will never work in our environment, and we MUST use an audible "clapper" and ability to align entire media clips by subframe according to those "claps" in the audio waveforms. Have you yet experienced this, and if so, what to do?
@lerychfotovideo Жыл бұрын
Hi. You really rock! But what is the mouse-like device you are using?
@ahsanandrian8272 Жыл бұрын
hi chad, nice video. i've using speed editor for multicam too. i wonder if there's a keyboard shortcut for painting angles?
@CreativeVideoTips Жыл бұрын
Thanks Ahsan, if you are referring to kind of roll, trimming the angles out - that is specifically a cut page feature and only can be rolled out with the speed editor. You can always dynamically roll cuts with W, and then JKL as well though to trim any shot in the edit page.