How to add TRANSITIONS in DaVinci Resolve - SPEED EDITOR Tutorial

Learn how to add, modify and remove transitions using the Blackmagic Design DaVinci Resolve SPEED EDITOR along with several other useful keyboard shortcuts and a "super-secret" mouse tip to make smoothing out your video with transitions much faster! Find out why the Cut Key or button on the Speed Editor doesn't actually Cut a clip - you will want to use the Split key instead. Also learn a faster way to perform a J and L Cut using the Speed Editor over in the Edit Page.
00:00 - How to add Transitions in DaVinci Resolve 17
00:43 - Cut Key - Speed Editor
01:49 - Dissolve Key (DIS) - Speed Editor
03:21 - Smooth Cut Key (SMTH CUT) - Speed Editor
04:59 - Live Overwrite Transitions
06:15 - Secret Mouse Transition Technique
06:54 - Transition Duration Key (TRANS DUR) - Speed Editor
07:22 - Set Key (SET) - How to preset a defined Transition Duration - Speed Editor
07:49 - Transition Type Selection Key (TRANS) - Speed Editor
09:54 - Cross Fade +3 dB Setup
10:17 - Crossfade All Clips to fix Zero Crossing Pops
10:41 - Top 4 Transition Keyboard Shortcuts
12:17 - Transitions Browser for Multiple Edit Points
12:55 - Transition Browser for a Single Edit Point
13:21 - Handles Defined and Error Message
Subscribe here - kzbin.info...
Recommended Playlist - DaVinci Resolve 17 Tutorials
• DaVinci Resolve Tutorials
Share this video with a friend - • How to add TRANSITIONS...
🎥 --- VIDEO GEAR and AUDIO PICKS ---👇🏻
Sony a7 III Camera Body ➡️ amzn.to/39kzLiz
Sony a7S III Camera Body ➡️ amzn.to/3ppBI2T
Sony 24-70 GM Lens ➡️ amzn.to/2YiLgkr
Sony 16-35 GM Lens ➡️ amzn.to/2YiLl7J
Sony RX100V (overhead camera) ➡️ amzn.to/3iRByif
Deity V-Mic D4 Duo on Camera Microphone ➡️ amzn.to/3iP7xzR
Sennheiser AVX Wireless Lavalier Kit - amzn.to/3opxE1n
Sony MDR7506 Headphones ➡️ amzn.to/2NvfOx5
Tascam DR-60D MKII Audio Recorder ➡️ amzn.to/39oFXWM
Rode PSA1 Microphone Boom Arm ➡️ amzn.to/3r2ObtO
Audio-Technica AT2020 Condenser Microphone ➡️ amzn.to/3cr1mke
Focusrite Scarlett Solo USB Audio Interface ➡️ amzn.to/3ovyhq3
📦 --- STORAGE (Hard Drive) & MEMORY CARD PICKS ---👇🏻
Sony Tough-G SD V90 SD Card ➡️ amzn.to/3pngkeB
Sony Tough-G SD V60 SD Card ➡️ amzn.to/2YgNjWf
Samsung T7 NVMe SDD Hard Drive ➡️ amzn.to/3sVkxbP
🔆--- LIGHTING PICKS ---👇🏻
Godox SL150W II COB LED Light ➡️ amzn.to/2MxxCHi
LAOFAS 35” Softbox ➡️ amzn.to/3ohLD9q
Aputure MC RGB Hair Light ➡️ amzn.to/3ohLSBm
-----------------------
This description includes affiliate links, which earn a commission to help support my channel at no additional cost to you. I only share products and services that I actually use and believe in.
-----------------------
Geat DaVinci Resolve 17 for free! www.blackmagicdesign.com/prod...
If you have a topic you want me to make a video about - ask me in the comments. I'd love to make the content you want to see.
ℹ️ - NEW HERE? -
Hi! I’m Chadwick. I’ve been a full-time professional video editor and filmmaker for nearly 20 years. Creative Video Tips helps you create videos that make a difference and stand out. I post new videos every week to help you learn how to make better videos. Learn video editing today with how-to tutorial videos about everything from capturing great looking and sounding video to the post-production editing that pulls it all together. I also upload gear reviews about filmmaking gear too!
If you would like to see more, please subscribe and turn on notifications for weekly new creative video tips. If you know anyone who would benefit from this video, share and like the video.
📱 IG: / creativevideotips
🖥 Website: creativevideotips.com/
#CreativeVideoTips #DaVinciResolve #SpeedEditor

[@WilliamFaucher]

I have to say you're THE go-to reference for anything related to the Speed Editor. Like most people I got this free with the Resolve Studio license, and it would be a paperweight without your videos. Thank you. You deserve way more subs.

[@CreativeVideoTips]

Wow, thanks! I really appreciate the comment and encouragement. Cheers on getting and more importantly learning a new way to edit :)

[@nextgas100miles9]

Great tutorial! No doubt, I’ll personally raise your view count rewatching as I learn! I’ve watched a few different Speed Editor tutorials and I’m staying here. Well done.

[@cosmonaut1961]

Thank you man! I just got my speed editor today and yours tutorials are extremely helpful for learning!

[@frankygoestocanada]

Hey dude, I just "discovered" your channel and I will stick to it because you're awesome! Clearly explained with a touch of humour, makes them fun to watch and I learn a lot from you! Keep on the good work (because I know how much work it is...). I really appreciate your teaching! Have a nice one! 😁

[@carlosestradadesign]

Just converted from Adobe (12years) to Davinci this week. Got my speed editor in today. Your tutorials are currently BLOWING MY MIND! I honestly can't thank you enough for sharing your easily digestible knowledge! It has been overwhelming to learn a new editor, but you have made this transition so much easier! Thank you!

[@twofoldfilmhouse2037]

transition lol good one, wow 12 years I cant imagine what the change would be like. I mean I did 2-3 years with Adobe and I felt like I was considered a lifer. lol Now go get the Micro panel and every blackmagic camera lol anywho good luck on the change over boss

[@dirks4093]

Super helpful tutorial ! Well done! thank you.

[@CreativeVideoTips]

Glad it was helpful!

[@MidwestWrestle]

"You can choose any one of these incredible transitions including my favorite... Star Wipe. Let's check it out. Magical." I am dead. 🤣🤣

[@CreativeVideoTips]

Don’t knock it till you try it 😉 j/k. Glad my subtle jokes are coming through.

[@MidwestWrestle]

@@CreativeVideoTips 💯 that was comedy gold! Keep up the incredible work! I learned so much about my Speed Editor thanks to you. You're the only one out there really teaching us how to use it. Everyone else just barely scratch the surface.

[@airtrafficmedia]

I’ll have to second that. ⭐️🤣😂🌟

[@AboveandBeyondGlobalDrones]

My Speed Editor just arrived the other day and have been watching your videos to get familiar with all it can do. Your vid's dive a little deeper than other's out there; Thanks for that.

[@CreativeVideoTips]

So cool! Congrats. And I’m glad they are helpful. I appreciate you watching.

[@michaheinrich9919]

@@CreativeVideoTips yep, can confirm, because of You, I'm getting mine tomorrow. Now to binge watch You work :P Thanks!

[@Hamlo76]

Hi. Im a newbie on Resolve (for iPad) and enjoy your videos a lot. I discovered that if you mark the "audio only" key on the speed editor in the cut page and add a transition (dissolve) it only puts a cross fade between the clips.

[@JVJF7]

Very useful 👍

[@broadys_on]

Memory full. Thank you.

[@CreativeVideoTips]

You bet!

[@RelaxingBlues]

Thanks for the tips, mate. Very smooth and informative. I really like the way you do this; keep it going; I wish you the best. Thanks

[@CreativeVideoTips]

Glad this is helpful! Cheers

[@MoishHas]

You are amazing with your skill of teaching. Thank you so much.

[@CreativeVideoTips]

Wow, thank you! I appreciate you watching.

[@sunj_av]

I found your channel after being sick and surfing YT. So happy the algorithm gods brought us together 😅 I’ve binge watched lots of your videos and I love your style and completely relate to being organised and in control of the workflow. I have to share a use-case where I think the smooth cut button is the BEST button on the speed editor! I edit mostly podcasts. Often clients don’t provide or want b-roll and I’ve found using smooth cut to remove filler words, coughs, etc has made my workflow faster. What would you change the button to? Thanks for the great content. 👍

[@fletcherbrown728]

Just Awesome: Your scripting, pace, depth and editing are the pinnacle of what training videos should be. I am in China and should receive my Editors Keyboard day after tomorrow. So - I’ll have my 12.9 iPad set to Chadwick’s playlist featuring your smiling face and ball cap, sitting next to my Editors keyboard and Divince on my wide monitor and plan on a couple of sleepless days. Thanks so much for your hard work.

[@demetrixxx8962]

Nice one man, very useful tips. Thank you.

[@CreativeVideoTips]

Glad it was helpful!

[@airtrafficmedia]

The restrained giggles at 12:47 on the most wonderful eye iris transition.👁 I just can’t… 🤣

[@CreativeVideoTips]

Gotta love those "legacy" type transitions that have made it in a very new and modern edit controller.

[@EdwardKilner]

For this video, I slowed to 0.75 speed. Even so, I struggled a bit. You sped through some things I am not familiar with and although I saved the video for rewatching, I’m not sure I’ll be able to figure it out. I hope I’m wrong. These are valuable videos. Would never have figured how capable the Speed Editor can be.

[@Herr.Mitternacht]

Awesome work. Thank you for the in-depth tutorials. Keep up the good work mate!

[@CreativeVideoTips]

Hey thanks for watching - glad to hear they are helpful!

[@brutsalvadi]

Great channel! The videos are extremely well made, you deserve more subscribers, so I immediately subscribed! XD

[@CreativeVideoTips]

Welcome aboard! I really appreciate the support.

[@andygregory8108]

Great tips for a newby to the speed editor, thanks.

[@DarrenAllatt]

Hey mate love your content and your work any chance that you could please do a full video on your workflow with a specific focus on the transitions that you use l

[@alantuttphotography]

Didn't know Resolve allowed adding transitions to multiple points at the same time. This one tip was incredibly valuable on it's own. Really looking for every way to speed up my editing with this program.

[@CreativeVideoTips]

There are so many of those cool little things blackmagic has thought of. I'm glad you are finding it useful!

[@eskibuzdolabi]

Great video. Thanks! Just bought my speed editor and learning frm u

[@WinslowLincoln]

Found your video very helpful, Thanks!

[@ren-shen]

Very informative. Thank you very much. One suggestion, when showing your speed editor selections, please use only one finger! Sometimes it isn't obvious which key was pressed! But all very useful! Thanks again.

[@CreativeVideoTips]

Ah thank you! And I appreciate the feedback on the button presses not always being clear. I’ll try to do that next time.

[@EdwardKilner]

Yes, I second the motion. It will be very helpful to me too.

[@musasoyyo]

Hello, first I want to thank you for your incredibly useful videos, thanks to you I decided to get my speed editor and just waiting for it to arrive. I think the smooth cut is useful for example if you are editing an interview recorded over "zoom" or "Riverside fm", I edit a lot of video podcasts for my clients and they record over this type of platforms, so there are not many camera angles or B-roll, I usually hide the "uhmm" cuts by cutting to the other person reaction or by creating a split view (PIP) and cutting to that, but sometimes when people say "uhmm" to often this technique can be to overused and quite horrible to watch so the smooth cut comes in very handy.

[@LaHoraMaker]

Great video! Loved the pace, examples and general flow of it!

[@CreativeVideoTips]

🙏 thanks so much for watching - glad it was helpful!

[@chrisbogart687]

I have been downloading and following all your Davinci Resolve tips on the Speed Editor and Cut page. I finally got notice that mine is shiped and will be here tomorrow. I cannot wait. In the meanwhile - your tips on the Cut page has really made a difference for me. Now to take the next step. Keep up the good work and great tips. I really can follow your presentations and put them into practice. I do a lot of multi-camera work in developing presentations of how-to nature. I did upgrade to the ATEM Mini ISO and that is the cat's meow for getting synced recordings. It was worth the extra $$. Before I had to manually sync some cameras since they were just POV with no audio and others did have audio. Now with the ATEM Mini pro-ISO that is history. You may want to just do a tip using the recorded timeline and media pool that the ATEM Mini Pro ISO captures. It is a great starting point that allows me to really capitalize on the features of the CUT page since I cannot do a lot of control in real-time and have to rely on the recorded output of the ISO. Now I can do all my multi-views, trims and over-writes. This type of work was made for the Speed Editor and Cut page. Thanks for inspiring me.

[@CreativeVideoTips]

Chris - dude you are the best. It's hearing stories like this that mean the world to me. It is so encouraging. I'm very excited for you finally getting your hands on the new tool. I would love to do a video about using sync'd iso'd cameras but I don't think I have access to one of those devices. Maybe I could use some of the cooking footage that blackmagic always does a demo with. Either way it sounds great and having that timecode all taken care of for you is going to save you so much extra effort and time! Cheers!

[@chrisbogart687]

@@CreativeVideoTips The Speed Editor finally arrived after over 2 months of patiently waiting and watching your videos. The best part of using the new ATEM Mini Pro ISO as a one person effort and using cameras giving multiple angles is that sync'd project file. Ton's of work and time is saved. Now I can record all cameras and mic's and do it all in post processing using Resolve and Speed Editor. Before I had to worry about switching manually and demonstrating at the same time. I can create a test/demo project today using the ISO and send it to you on an SD card if you want.

[@KaarloMedia]

Creating J/L cuts can also be done by locking tracks on the Edit page. Just lock the video track / audio track and roll or trim the other independently with the Speed Editor. A disappointing detail is, that the Speed Editor forces a transition on the locked tracks (video / audio) if the audio and video are linked (say you wanted to quickly add audio crossfades only). Only unlinking will fix this behaviour.

[@CreativeVideoTips]

I had forgot to even try locking the tracks to see how it behaves. Great tip! But yeah it seems like if you want to drop audio or video only fades you kind of need to use the keyboard shortcut or mouse. Bummer on that front. (Unless unlinked which you’d need to take your hands off anyway)

[@Jakepp235]

This was helpful thank you

[@CreativeVideoTips]

I'm so glad!

[@eqilibrius]

Thanks for the helpful tips mate.👍 My Speed Editor is still on Pre-order. I'm so hyped 🤪

[@CreativeVideoTips]

Thanks for watchin’! I’m excited for you, it’s a lot of fun.

[@martinclay7557]

Good stuff Chadwick, this one will be visited again that's for sure!! Thanks

[@CreativeVideoTips]

Thanks so much Martin! I very much appreciate you. Glad it’s helpful.

[@user-ll9ln1uu4b]

Very helpfull, thanx a lot!!!!

[@CreativeVideoTips]

Glad it helped!

[@CreativeVideoTips]

00:00 - How to add Transitions in DaVinci Resolve 17 00:43 - Cut Key - Speed Editor 01:49 - Dissolve Key (DIS) - Speed Editor 03:21 - Smooth Cut Key (SMTH CUT) - Speed Editor 04:59 - Live Overwrite Transitions 06:15 - Secret Mouse Transition Technique 06:54 - Transition Duration Key (TRANS DUR) - Speed Editor 07:22 - Set Key (SET) - How to preset a defined Transition Duration - Speed Editor 07:49 - Transition Type Selection Key (TRANS) - Speed Editor 09:54 - Cross Fade +3 dB Setup 10:17 - Cross Fade All Clips to fix Zero Crossing Pops 10:41 - Top 4 Transition Keyboard Shortcuts 12:17 - Transitions Browser for Multiple Edit Points 12:55 - Transition Browser for a Single Edit Point 13:21 - Handles Defined and Error Message

[@lifeguardlloyd]

Great stuff! So helpful! ❤️

[@CreativeVideoTips]

Great to hear - thanks for watching :)

[@johnmorris1162]

I've just been trying out the Speed Editor with Resolve version 7.1.1 and noticed an inconsistency in how transitions can be added between the Edit page and the Cut page. Adding a transition on the Edit page now automatically slips two clips together if there is not already an overlap whereas Cut page requires both clips to overlap beforehand. This auto trim seems to happen only when using the Speed Editor add transition keys on the Edit Page, making it actually easier to use than on the Cut page!

[@CreativeVideoTips]

Very interesting!

[@WinslowLincoln]

Does that automatic overlapping ripple the entire timeline?

[@Chess4lyfe]

Excellent stuff...subscribed!!! Now, if you could just download everything you know about Fusion into my pea brain...I’d be golden!!! 👍🏾🤣👍🏾

[@CreativeVideoTips]

Hey thanks for subscribing! Fusion is like another world and I feel ya. Good to know that some fusion tips would be helpful.

[@Chess4lyfe]

@@CreativeVideoTips this is the closest thing to a guide I’ve found and it’s a beast. documents.blackmagicdesign.com/UserManuals/Fusion9_Manual.pdf I’m told it hasn’t changed much and that’s why there’s no update. So I’m making my way through it. Keep up the good work my friend...and as a Mets fan, I won’t hold you rocking Cubs gear! Lol. Although I’m glad you’all got one! Cheers.

[@Chess4lyfe]

@@CreativeVideoTips one other question, I need to buy a USB C to USB cable???

[@adkinsproductions4055]

The cut button on the panel not matching the cut function in the program is one of the worst design decisions I think I"ve ever come across. I just ordered a speed editor to take advantage of the special they're running on Resolve Studio, and this really dampens my enthusiasm. Absurd. Great video, though! :)

[@CreativeVideoTips]

Man I agree - although in their defense it matches the position and function on the cut page for transitions. I just think it should be a not symbol - something that indicates removing a transition. Thanks for watching.

[@adamhearts9195]

i bought this keyboard because it came with studio 17 included. how could you not.

[@CreativeVideoTips]

I agree - it was really a no brainer purchase. And it's a lot of fun!

[@Dexter101x]

Subbed

[@SteveVickAK]

Awesome content. Sub! I assume you are making these tutorials with Davinci? If so, do you have a video on how you make them. The outlining of content to highlight is a nice affect. I currently use Camtasia for tutorials, as it has easy to use prebuilt tools. But the software itself is pretty crappy. Any way, tips on how to make tutorial with Davinci would be awesome.

[@gidonas7719]

Thanks for your videos, Leaned a lot! But what not seems to work here is de command 'shift t' to put crossfades on all the audio cuts. All the rest seems to work.

[@CreativeVideoTips]

One thing to check - are you selecting the edit point first? (is it highlighting neon green) - Try hitting "V" or "Shift E" (select next edit point or audio edit point) and then tap "Shift T" to drop that crossfade on. Let me know if this works for ya'

[@ErikOlsen]

I bought the editir keyboard and love it. I have a question about the F/TC key to enter timecode/frame count. I know about right-clicking on the number field to switch between TC & F, but every time I press the F/TC key to get to a specific location on a media pool clip via timecode, the number field switches to frame count, in other words, every time I press the F/TC key it defaults to frame count. I have right-clicked on the number field to change it back timecode display, but it seems to switch back to frame count. How can that be fixed?

[@keithdennis5085]

Hi. Another great tutorial! In doing J and L edits, you talk about using Option + E. For me, that keyboard shortcut has not be set. In Keyboard Customization, what would I need to search for? I tried "select video track"; however, no suggestion popped up. 'Hope you can enlighten me. I love your channel!

[@CreativeVideoTips]

Hi Keith - if you are on a PC, then I think it would be Alt + E, but for me this is set under the default Resolve Keyboard set. The command is under the menu - "trim - select nearest video edit point". You can then see what it is set to under that menu or change is with the keyboard customization window to whatever you'd like it to be. Let me know if this helps! Cheers.

[@keithdennis5085]

@@CreativeVideoTips Thank you for getting back to me so quickly. Yes, I found it easily enough with your help.

[@KezhAndre]

👏🏻👏🏻👏🏻👏🏻👏🏻👍🏻✌🏻

[@SCHAUDENLUCAS]

Thanks for all those useful tipps! Do you know if there is any way to replace those super cheesy oldsql dve transitions with the fusion transitions or even custom ones? Besides missing J- and L cut options, this is definitely the most weird fail with the speed editor...

[@CreativeVideoTips]

Thank you! I sure wish there was an option - as far as I understand we are stuck to non-fusion transitions for now unless we go rogue without using the speed editor. I appreciate the question.

[@SCHAUDENLUCAS]

​@@CreativeVideoTips I see, so back in the 90s, when dve-transitions where a thing, the speed editor would have been amazing the way it is. Thanks for the reply though. I just found another pretty important shortcoming / possible improvement. It's unbelievable but the speed editor is actually lacking ripple trim. It would be soooo much more efficient if they would introduce ripple trim, for example via doubble pressing trim in / trim out.

[@JVJF7]

Why use the dissolve transition while the smooth cut looks more nice?

[@Ryzza5]

When you placed the barn door transition, what would then be the quickest way to applying easing? If my clips don't have handles but I want it to automatically trim and add the transition while using the speed editor or keyboard shortcuts, what would be the best way to do so, while avoiding that prompt?

[@CreativeVideoTips]

The only way I know to change the easing on a transition like barn doors would be to open the inspector to the transition tab (and mouse click) to change ease to "in & out" or whatever your taste is. After you've done this once - you can go into the edit page - right click and tell it to "create transition preset". This puts that ease into a user-saved preset. If you want to drop that on a handful of clips on the timeline just select all the clips (keyboard or mouse) right-click on your new user preset transition and tell it to "add to selected edit points and clips". It will prompt you if you don't have handles and let you know it will automatically trim for you if you let it.

[@barrygreen9918]

At 2':50" you say DIS defaults with transition on both video and audio. Great - just what I expected. Mine only adds to either video or audio. Shft+T (alone) adds transition to both video and audio, which is annoying as it has to be on keyboard. How do I make my default Speed Editor DIS or SMTHCUT default to adding transition to both video and audio?

[@CreativeVideoTips]

I'm wondering if your keyboard settings could be set differently? Go to your keyboard customization and search for "add transition". Mind is set to command/ctrol t for add transition. This is something I hadn't changed from the defaults. It could possibly also have something o do with your linked selection. Is that turned on or off by chance? Try toggling that.

[@barrygreen9918]

@@CreativeVideoTips Thanks for those instructions. I verified KB defaults and Link Active all ok. Then by luck, doing another clean Spit and transition, it worked perfectly. I concluded my former Split was faulty as the red selection frames disappeared off the audio track as the cursor landed on the Split. Zooming into the Split I saw that my audio split was a fraction away from the video split. So the issue was my own faulty shift or roll at the split. As a novice, try as I may, I cannot fathom how to realign the two tracks, but I guess a few KZbin searches will get me another step higher on the Davinci curve. Thanks again.

[@chezchezchezchez]

Where can I see the whole video? I wanna see how it ended about the rock climbing.

[@WinslowLincoln]

Why does the "CUT" key have a light? Does that indicate dome other functionality?

[@Deep-Travel]

For example, I have several clips in the timeline. I want to move one clip to earlier in the timeline and insert it between two clips. In FCPX is easy as it basically ripples the timeline down to make space for the clip I am inserting. How do I do that in DR17? It’s there is anyway I can make it ripple down to make space for the new clip? How do this properly in DR17. Thanks.

[@samirachiko]

Thanks for your video! A question: When I add a fade I press the "DIS" key and the speed editor automatically adds it between the two clips. I've been using it since today and I've noticed one thing: sometimes even if I press the key it doesn't add the fade! Why? when I press the button, a red signal appears briefly between the two clips as if to indicate that it cannot be inserted but if I go to the "EDIT" section, and try to insert the same fade, it inserts it without problems. Why?

[@CreativeVideoTips]

Hi Samir - the red indicators are suppose to let you know there is not footage available to do the transition, you would need to trim the footage down to add it. Or shorten the duration of the transition. My guess is on the edit section it is either trimming your footage down automatically or is using a shorter transition. That's my best guess anyway. Hope this helps.

[@SansP3ur]

@10:08 - I don't see an "Effects Library". Mine only says "Effects" and none of its content looks like what's being shown. Great vids btw.

[@CreativeVideoTips]

Hi there - yes this is 17, but this is on the edit page side at this point in the video. The cut page offers the same stuff but is laid out differently. My guess is you are looking at the cut page. Is that possible?

[@chadas]

How to set default transition type? The length is not a problem, but I don't know how to set the default transition type.

[@Deckardrick007]

I have no clue how I did this but my intro starts at 2:00. How can I moved everything to 1:00? Or erase 1:00-1:59? I hope I make sense 😅

[@dragonstudio4299]

hey does the speed editor have the ability to colorize clips to sort them in the cut or edit page? like on your project?

[@CreativeVideoTips]

That would be cool if it did but no. To change clip color a good way is to select a batch in the media pool - right click and choose clip color.

[@rowlandmartin85]

For me, transitions move too fast. How do you slow them down?

[@alistairbarclay3116]

Chad, what the heck is the menu button option supposed to do?

[@CreativeVideoTips]

Hi Alistair, Are you referring to the 3 horizontal line key that is secondary on "snap"? If so, this one will change your interface of your viewer on the cut page when you hold it while rotating the search dial. Is this what you are curious about?

[@alistairbarclay3116]

@@CreativeVideoTips sorry I put menu it’s have been it’s the title one under the trans key?

[@CreativeVideoTips]

Ah. Basically that one lets you use your search dial to rotate through all the fonts on your system. Drop a title down first without the speed editor then use that held down roaring to audition different fonts. It’s part of this video if you want to see it demonstrated- kzbin.info/www/bejne/j2WZhIGXaNaHpsU

[@alistairbarclay3116]

@@CreativeVideoTips thank you , I thought I was missing how to insert text with the speed editor, it’s another button that could do with a remap option which BM will offer at some point I’m sure

[@CreativeVideoTips]

@@alistairbarclay3116 yeah right now it just changes fonts - it's a cool party trick, but not something I've used too much.