Hope this was helpful and good luck on your crafting!✂ Visit our store on Amazon at: www.amazon.com/royalelements for printable vinyl sticker paper- most of it is compatible with the Cricut air (except glossy)!
@amywax9676 ай бұрын
Perfect, thank you
@paytonburleson7712 Жыл бұрын
The best Cricut video I have found! I don’t want to hear a life story. I just want to make cute things. 😂 thank you soooo much for this video!! I was so nervous at first but I did my first one well thanks to you!!
@stormchaser54 Жыл бұрын
yessss
@amywax9676 ай бұрын
Exactly
@user-hs4hp9ey8gАй бұрын
I bought my cricut 2 years ago and have never used it because all the tutorials have been so hard to follow! This one was super easy! I can't wait to turn it on and try it now!
@royalelementsofficialАй бұрын
It’s super fun! If I can do it while filing with one hand you definitely got this 🙌 😉
@colecoley3473Ай бұрын
Sameeee lmao
@mlop19974 жыл бұрын
Amazing tutorial!! Straight to the point with no unnecessary talking. Love it!! ⭐️⭐️⭐️⭐️
@iamangela1713 жыл бұрын
That's what I was thinking I cannot stand those videos where they blabber on and on and on and on and on and on and by the time they do all of that I don't even want to hear the video 😒
@Chrissysworlds2 жыл бұрын
FOR REALLLL HE IS AMAZING!
@kimmalpass3 жыл бұрын
Just got this for Christmas. Thank you for making it simple and to the point. I have much more confidence in using this now.
@queenelizabeth05 Жыл бұрын
Is it easy to use this
@kbryank3 жыл бұрын
My wife is taking up Cricut and she loved how simple and to the point this tutorial was, she wanted me to tell thank you so much.
@ayam65883 жыл бұрын
This has to be one of the simplest videos I’ve seen, straight to the point thank you. I’m looking into getting a cricut but all the videos I’ve seen make it look so hard but this one was so simple 👌
@krazzymonkeey Жыл бұрын
I finally bought one after months of procrastinating but my birthday is tomorrow on the 9th and decided to treat myself and also help me out in the long run
@ozelladavidson6767 Жыл бұрын
Yesss same here!
@juliepiasecki44493 жыл бұрын
I almost started crying when he wasted all that extra vinyl!!!
@wyllia43 жыл бұрын
Me too!!!!
@steppy37363 жыл бұрын
If he had cut the bottom portion off, can you reuse the bottom half of the vinyl sheet?
@brianarivera03053 жыл бұрын
@@steppy3736 yes!
@steppy37363 жыл бұрын
@@brianarivera0305 thank you! I just got a cricut for Christmas and I'm learning.
@brianarivera03053 жыл бұрын
@@steppy3736 haha no problem! I got one too for christmas but I've worked on some projects in school last year which is why I got it and know some basics already! :)
@SOMBREROSUE115624 жыл бұрын
I have not taken mine out of the box yet, so this was very encouraging!! Thanks.Love you get to the point and not give me stuff that I don't need. Off to open my box
@sischaadashah8562 жыл бұрын
Me either
@PLJ95.2 жыл бұрын
Praying for courage, when it said download to computer, Oh boy, 😆
@aladiascarlett-powell4379 Жыл бұрын
Love that this is short and very helpful. Thanks a million for this!
@lcampbell22173 жыл бұрын
Thank you. I just bought the bundle Air 2 Sunday , Mother's day, for myself. I was glad you answered my question (inside my head) on whether the vinyl can be used more than once.
@Beyondbubblybubbles-ir3iwАй бұрын
Thank you so much. I was given a used one and did not know where to begin
@royalelementsofficialАй бұрын
Glad it helped! It’s really fun once you get the hang of it.
@scarr5666 Жыл бұрын
I've looked at too many of these videos - this is the BEST ONE
@cianicholls56673 жыл бұрын
Love this tutorial im on my way to purchase a circut explorer today that was helpful no extra chatting as a lot of video's do turns me of alot. Thank you.
@darkshadowsx59493 жыл бұрын
Wow im not the only guy on earth that wanted one of these. i feel better now. I bought a broken one on ebay and fixed it. the belt drive gear exploded into 4 pieces so i made a new one. easy fix for a 3D design/ 3D printer guy $75 for a cricut explore air 2 is a heck of a deal. I just need to buy cutters and supplies and i was good to go.
@jinasanchez14 жыл бұрын
I love how you get straight to the point. More youtubers should follow your lead!
@ozelladavidson6767 Жыл бұрын
Thanks for making this so simple and to the point
@karimahgibbs14193 жыл бұрын
Just bought a cricut explore air2 today and I’m so excited 😁 This was very helpful and simple so thank you very much 😊
@nicolepickavance93693 жыл бұрын
Thanks man! I’ve had my cricut for 6 months lol this is the first time I’m trying it and it’s for my daughters party favours lol! Lord help me! Great video tho! Eased all my fears! : ) Thank u! Cheers
@kandymiles24643 жыл бұрын
Straight to point!! and simple enough for me to understand!!!!
@betwithpapi2 жыл бұрын
Nice!!! Thanks for this. Great video aside from the left hand!
@chamoritagirl764 жыл бұрын
Finally something simple and to the point! Thank you!
@G_Lob8142 жыл бұрын
Just got mime today. Been want one. Awhile I'm super excited to get started. Thanks for the easy video.
@chrisavila74293 жыл бұрын
Mom has the machine sitting there and thought I look it up and you the best!
@speckledwisdom11694 жыл бұрын
That big round knob on the top of the Cricut allows you to choose material to be cut- this is important. Do this first before you begin cutting.
@livingxlotus5644 жыл бұрын
thank you for the super straight forward tutorial.
@MizzSunshine12093 жыл бұрын
Merry Christmas! I was gifted my explore air 2 today & this tutorial made me so happy! Nice simple & to the point.
@kellyogrady13373 жыл бұрын
I got mine as well for Christmas. I learned that you should be locking this together, like the picture and the word so it is easier to put on what you want it to. It will all be lined up. Cut your vinyl as well so you dont waste it all like he did. Good luck with it! ;)
@MizzSunshine12093 жыл бұрын
@@kellyogrady1337 how do you lock it together?
@kellyogrady13373 жыл бұрын
@@MizzSunshine1209 On the bottom right hand side. there is a group button to group it into a whole picture so both the letters and the picture a grouped/locked in one.
@Mary105383 жыл бұрын
Omg, my OCD kicked in. But thank you for a simple explanation
@arielfisher9353 жыл бұрын
Good video. First video I watched to get a little insight on cricut.
@darthgeorge283 жыл бұрын
Thanks a lot man! I’m getting one of these for my fiancée for her birthday and was wondering how it worked!
@Cefon21214 жыл бұрын
In my spare bedroom my mom had this for awhile and never learned how to use it so I am deciding to pick up the pieces and try to learn to use it
@dawnalessandrini18944 жыл бұрын
That is such a cool machine!!!!!!💙💙💙 Thanks for the little tutorial. 😊😊😊😊😊
@royalelementsofficial4 жыл бұрын
You're welcome. Happy crafting Dawn!
@safetybuddy10 ай бұрын
Terrific video. Thanks for the lesson🙏🏼
@royalelementsofficial10 ай бұрын
Glad it helped!
@creationsbykaye98113 жыл бұрын
Thank you . I have been searching for a basic tutorial. This was informative. Thanks so much.
@secretsquirrel73744 жыл бұрын
So excited to get mine next week!
@NoU_UName Жыл бұрын
Thank you! this video goes straight to the point I love it!
@royalelementsofficial Жыл бұрын
Glad it helped!!
@chautauqua862 жыл бұрын
Thank you so much for this video! I've been nervous to try mine out, but this was simple enough to give me a boost! 😊
@iamangela1713 жыл бұрын
Your video was short and sweet! ❤️👍
@denisem54373 жыл бұрын
You have made this process so so easy. Thank you
@inspiredbymerli2824 Жыл бұрын
Loved this! Super simple! The only step you missed is pressing "Make it"😂 then hitting C button on cricut .
@annettemillspaugh6342 жыл бұрын
Thank you thank you! This is exactly what I was looking for!
@kelseyt74194 жыл бұрын
what I don’t understand, is he put “bite me” underneath the shark- but when cutting out the font on the vinyl, it’s to the right of the shark. (not underneath like it appeared on the app) I guess I’m just struggling with the design app it’s self 🥴🧐🤨😣
@noorqazi47494 жыл бұрын
hi! to keep things where you want on the mat, just highlight all the images (click and drag to select) and then click "attach" on the bottom right of the screen! they should appear the way you want when you click "make it"
@lcampbell22173 жыл бұрын
@@noorqazi4749 Thank you. I wondered that question also.
@McGentry4 жыл бұрын
Thank you! Just needed a simple idea to get started.👏👏👏
@dazzledbydiamond47003 жыл бұрын
your video was straight to the point thank you i cant wait to use mine
@Seven_Skizzle3 жыл бұрын
Great video - very useful, thank you
@Sandy-leigh2 жыл бұрын
Just got my explore 2 today,😀
@nikiagrady4 жыл бұрын
I’m new to the circuit family, and I have tried creating a image on vinyl, which I’m able to do but my only issue is removing the image from the vinyl... I tried several times and it still the same result. Do you have any tips to help me remove the vinyl easier? It also looks as if the blade is not cutting deep enough, how do I go about changing that.
@glendastevens73804 жыл бұрын
same
@alenebell31913 жыл бұрын
Same
@julieadalyn79253 жыл бұрын
thank god im not the only one
@JuliannFlavin10 ай бұрын
Omg he made it look SO easy lol! My vinyl legit ALWAYS rips and I buy the actual legit, cricket vinyl and then you have this guy doing it with one hand! What am I doing wrong??!!
@royalelementsofficial10 ай бұрын
Camera in one hand, vinyl in the other haha
@JuliannFlavin10 ай бұрын
@@royalelementsofficial you got skills!!!! But while I have you lol what AM I doing wrong? You think my settings maybe? I actually think I might’ve gone about it the wrong way to be honest with you because I thought that it wasn’t cutting deep enough and that’s why I kept ripping so I got the deep blade and put that in my cricket and then I also changed the setting to card stock, so maybe I should be going with the lighter settings?
@nancythomas51313 жыл бұрын
Just got mine a week ago excited
@arciefelix84182 жыл бұрын
Great tutorial! I have this cricut and know nothing about it.
@TheJCoop53 жыл бұрын
Short n sweet, good job. I'm still new to the community, but I still wish you utilized more of that vinyl lol. Overall great video
@debbyduncan69852 жыл бұрын
Great video
@seoxpert7073Сағат бұрын
You don't need a heat press for this? If I am transferring to a tshirt
@cynthiacatnott90123 жыл бұрын
Thanks.Ready to buy one !
@iamangela1713 жыл бұрын
I love your video because you're taking your time explaining everything!!!! Most people just zoom through it, talking so fast! Also I didn't know that medium transfer tape is what I should have purchased instead I got strong grip transfer tape! Will that work as well??
@donnafitzpatrick44863 жыл бұрын
You are great thank you
@eRaPhoenix4 жыл бұрын
That is so neat!! Thanks!!
@royalelementsofficial4 жыл бұрын
You're welcome!
@CheyenneB-qn3jg3 жыл бұрын
Someone told me i can download the software onto my phone and use my phone because i dont have a computer. Can i still use the machine with my iphone 11 ?
@lcampbell22173 жыл бұрын
@Cheyenne B5150 I was told that was possible. Tablets too.
@JuliannFlavin10 ай бұрын
Yes!
@agnesfredericksen98923 жыл бұрын
Also adjust your dial to the vinyl setting so the blade will cut properly, Complete Begginers need to know every detail !
@25skai3 жыл бұрын
I just made that mistake of not changing the dial. As soon as I saw your comment it made sense why my project didn't work. Thank you!
@tmcbryde14 жыл бұрын
Thank u for ur help :) I was able to navigate along with u THANK U THANK U THANKU..
@tylerandalexa123515 сағат бұрын
can you edit the designs in your iphone ? or you do need a computer? thanks
@vintagelove16192 жыл бұрын
awesome well explained video
@queenof2kings2993 жыл бұрын
Thank you!! So simple, appreciate it
@maddyaitken26073 жыл бұрын
Do you recommend this for a small business or do you think it's just for recreational purposes?
@1.ncgaming2063 жыл бұрын
me and my family are using it for a small business that we just started and it’s working very good so far
@angelinashankle758 ай бұрын
Do you take the white backing off the vinyl before laying the sheet down and cutting? I can't seem to get the letters off the sheet with the transfer paper
@DebbieBreit3 жыл бұрын
Why does my EXPLORE AIR 2 cut right through the vinyl onto the mat? I’m a Newbie and so confused with this. Thank you, I’ve subscribed because you teach and get right to the point. I need someone to slowly teach the icons being used in a project, I know nothing.
@AAKBOI Жыл бұрын
My guy flexed his richness with little to no effort when he wasted all that vinyl
@royalelementsofficial Жыл бұрын
Lol and filmed with one hand 😉
@djwarrior1421 Жыл бұрын
Ty. ON MINE, There is a clear plastic over the pad that I would lay the colored vinyl on before cutting. Do I remove that protective sheet before placing the colored vinyl for cutting? On the video, I did not see you remove it or talk about it.😢
@bridgetmontano862722 күн бұрын
Question. So I did all the steps you said but when I got to print it’s telling me to load a black pen in clamp a? Instead of me using the blade in clamp b. How do I fix this issue ?
@royalelementsofficial20 күн бұрын
It sounds like you’re using a different setting to draw instead of cut. When going through the steps on Cricut Design space I’d double check about that.
@chrystalmitchell66642 жыл бұрын
I do not have a lap top, will an apple desk top work also? I’m so nervous about which cricut to purchase. This video was very helpful.
@rubybarajas88733 ай бұрын
Which vinyl are you using? Something I have a hard time removing it from the cricut board
@royalelementsofficial3 ай бұрын
I believe I used our Royal Elements permanent adhesive vinyl sheets. We discontinued these though. There are a lot of good options out there on Amazon. I'd recommend using a lighter grip cutting mat if its sticking too much.
@BTHMMIV8 ай бұрын
Can you sell items using the free images and what not like using that free shark image on a shirt selling that for an example
@nicalita693 жыл бұрын
Thanks for sharing this video. This is good investment for me as a beginner . Would you know if its compatible to android phones? I don't have iPhone.
@shanterricahill20913 жыл бұрын
Thank you 😊
@kndewit12 жыл бұрын
🎉🎉🎉🎉 Thank you so much!
@154g Жыл бұрын
How does one cut a custom shape? Do i have to draw it out or give a measurement?
@aliciarahn20974 жыл бұрын
Is it possible to upload your own drawings?? My daughter is an incredible artist. I had hoped to use her drawings
@nikkaewing54 жыл бұрын
Yes!! You would go get to image and upload it.
@KillianWargear19212 жыл бұрын
Good gawd! How much does the vinyl cost? That’s a big waste for just a small image and six letters. Maybe I should take mine back so I’m not throwing away money. Is there a way we can use more of that vinyl in one cut with doing more images and letters in the creator or reuse what’s left of the vinyl (if pealing the shark and bite me out instead)?
@juliansuddith47424 жыл бұрын
have you tried this with a design that consists of multiple colors?
@royalelementsofficial4 жыл бұрын
Yes we have tried layering vinyl! You have to cut multiple sheets then transfer one layer at a time using transfer tape. Great question!
@dianereyes19412 жыл бұрын
You made it look so easy ...Thanks for Sharing
@mytchwashington36173 жыл бұрын
Thanks for the video, I had a question. Instead of choosing a design can you upload one ?
@annabelleowens873 жыл бұрын
Yes. You can upload your own designs, however I don’t know how. You should probably just look up some KZbin videos.
@jennykap043 жыл бұрын
Which vinyl should I get for my cricut? They had iron on or the stick on at walmart. I bought iron on but I want to make sure I buy the right stuff.
@heathercairns89523 жыл бұрын
mine doesn't have the filter or the corners that you can pull in to adjust your size. My software is up to date I have the Cricut explore air 2. ty
@allisonwacker16063 жыл бұрын
What if I don’t want to put it on something yet? Is there a material I could Stick it to, to store it until I’m ready?
@NormalindaMarquez Жыл бұрын
can the transfer tape be reused for another project?
@marshellhooper19842 жыл бұрын
hi im having trouble paring my laptop. I tried a chromebook, mackbook and its not pairing
@wesleymartin27678 ай бұрын
Is this how u make car window stickers?
@cherylrich73124 жыл бұрын
What about layering different colors of iron on vinyl? What about washing the garment? Please advise...
@chrisloedition Жыл бұрын
Can I put this on a shirt?
@mirandagarcia78722 жыл бұрын
do you have to buy the subscription ?
@gabrielgurrola74912 жыл бұрын
Question, you placed the text below the shark. When you sent your design to be cut, it did not respect the placement. Why is this?
@alexi01156 күн бұрын
Can you use a phone instead of laptop?
@royalelementsofficial3 күн бұрын
Good question! I don’t think so, someone can correct me here if I’m wrong though.
@debbiechance82484 ай бұрын
Where did you get the transfer tape at??
@royalelementsofficial4 ай бұрын
We used to sell our brand on Amazon but it was discontinued. Look for brands with good reviews on Amazon that’s your best bet
@empressstrose10223 жыл бұрын
How do u know when the Bluetooth is connected
@designsbysye36293 жыл бұрын
Question I have the green cricut mat do I remove the plastic film off of it before I put it in the machine?
@sonyafreeman59363 жыл бұрын
Do you need to enroll in "Cricut Access" because I do not have the options in design space that you have listed?
@minamina1688 Жыл бұрын
Can you use your phone to upload images and stuff? 😬😅
@suefox51623 жыл бұрын
do you have to mirror the image?
@lilnayteamgutta8488 Жыл бұрын
It keeps saying failure can’t connect to vinyl
@vmarroquin983 жыл бұрын
This is where I struggle my vynil gets stuck to the white back sheet and ruin my design, my design ends up on the plastic side of the vynil.