WeCreat Laser Rotary Jig Attachment: Full Tumbler Engraving with Cup Turner Attachment

[@cassandraknight6485]

Makerflo has some really great tumblers in all sizes/colors. The handles are sold separately, so it's not an issue. Great products at reasonable prices. I use them with my 20w wecreat.

[@Cricuter]

Thanks for the info! I'm going to look into that!

[@SailormoonGirl6]

Have you ever tried to laser engrave a 11oz. ceramic white or color mug on a We Creat Vision 20 Watt? I want to engrave from handle to handle. (1 inch destance fron each handle side) full wrap or 2 sided wrap. It was not working out on the old rotary set up. I just got the rotary pro two days ago but did not set it up yet. Could you so kindly show me how to set it up right to make it work. Thank you & Blessings..

[@LatashaBrand]

I need your help! I have the Vision and am trying to create the extension based on your video. However, when trying to create the peg from the jaws it does not screw in like how yours was in the video. Any advice on what I am doing wrong?

[@dejacks6981]

Thanks for this tutorial

[@Cricuter]

You're welcome 😊

[@ryanweller6242]

Great idea, but it looks very flimsy. Do you notice any difference in the tumbler?

[@Cricuter]

I think it's sturdier than it looks. Everything fits very snug and when you have that bottom piece under the tumbler it keeps everything level and in place. I use it all the time and my cups always come out great

[@ryanweller6242]

​@@Cricuter awesome thank you 😊

[@kimtompkins7969]

Where is the Amazon store for the cup insert? I cannot find it and I am searching Amazon high and low!

[@Cricuter]

I always leave links to materials in my video description so you can find materials easily. Here is the link: amzn.to/3UCZQkn

[@janeypumphrey9266]

I purchased the Cup Turner and it came with two different sizes. It didn't come with the PVC Pipe required, so I ordered those separately, but thy are super long. I need to cut them, but How long of a piece should the PVC Pipe be?

[@Cricuter]

3"

[@Bell2BellStaff]

Hello! We've been having issues using our attachment as it pertains to our engravings. They look great on the WeCreat program screen while sizing the image. However, once we let the laser begin the engraving process, the actual engraving is so much bigger than how it appears on the screen. Not sure why the machine is doing that. It is leaving our tumblers with part of the image missing. If you have any tips or information regarding our issue, it would be greatly appreciated!

[@Cricuter]

I think either you have the wrong units selected, like if the software is set to mm and you're measuring in cm. Or you could be measuring the diameter or perimeter wrong, or putting the units in the wrong spot. That's my guess.

[@Cricuter]

kzbin.info44IQg1uZSb8?feature=share

[@calebfortune]

Our hardware store only had 1/2 inch. no way to attach it and honestly it's a bit flimsy, will be returning mine.

[@Cricuter]

I made this video before WeCreat re-did their rotary. I would get their new Rotary Pro upgrade kit shrsl.com/4skhf

[@dford62]

How long is your 3/4 " pvc pipe?

[@dford62]

Found it sorry to bother you

[@Cricuter]

no worries! 3" for anyone else who may be wondering

[@vinniegunns3293]

I am confused.. your post on facebook says you cut the pvc at 6 inches.. i did that.. and it wobbles.. i saw a post that you then say its 4 or 3 inches? which is it? you are kind of misleading.. and these jigs seem to fail... and it took 3 weeks to ship... these are awful and your misleading with your posts on facebook and here..

[@Cricuter]

I apologize, I misspoke on Facebook. I asked my husband at the time what length he cut it to and he said 6" when it was actually 3". However, that really doesn't make much of a difference because the support that goes under the cup keeps it level and prevents it from wobbling. Try cutting it down to 3" and see if that helps. As far as shipping goes, I have nothing to do with that. They seem to sell out of them frequently and were probably back-ordered. I don't make and sell these myself. I'm just simply sharing what works for me for moving my tumbler past the no-engrave zone. If you're unhappy with it I'm sure you can return them.