Not a shim Adam, it is a reed valve for the crank breather system, it helps to maintain a partial vacuum in the crankcase as the piston rises, it helps to stop oil weeps through the crank mains which have non existent seals. Timing marks are dots/lines on the cam gear and the mag drive gear.
@deangdmppajj46927 күн бұрын
My thoughts too, also will the points be opening up at the same time with the different mag. Magnetos that I have timed on old motorcycles are timed by the position of the gear on a taper
@steveproctor5477 күн бұрын
Love your videos Adam Paint the CROSSLEY to look new
@davekortbeek7 күн бұрын
Yes do a total restoration, it will be good to watch. Great video keep em coming.
@astravanmk27 күн бұрын
I reckon the crossley would look great with a new coat of paint. :)
@JohnnyCollingworth3 күн бұрын
Definitely a pain job Adm for Mrs mancave great video as always mate and love to Mrs mancave ❤
@alexgarrod90936 күн бұрын
Give it lovely paint job Adam maybe dark blue or dark green
@MrNostalgicdave7 күн бұрын
What a great spark , the mag tester proved its worth 😊
@thamesdittonable7 күн бұрын
Deep clean and new paint! Was watching Way Out West on KZbin and your bloke has put his hands on a very old machinist’s lathe, you really need to have a look, it is a monster.
@Equiluxe16 күн бұрын
The reason there are several sets of holes in the mag mount bracket is so the Crossley can use different makes of magneto, the mag on there is more than likely the original but it is scrap any way not due to the bearings but the rust on the com is too deep so will destroy the fiber cam follower on the points double quick. What about fresh lubrication for the mag bearings which is through the holes underneath with those screw plugs.
@RobertGott-c3f7 күн бұрын
Another job done Adam Thank you😮😮😮😊
@fredharrowven10407 күн бұрын
Hi Adam, Nice job mate me I say paint,🛠️🛠️⭐️👍👌
@marksmith-ew7ir7 күн бұрын
Your box of mags from months ago came in handy 😊
@laurieleyden36547 күн бұрын
Clean and paint please Adam.
@georgek27343 күн бұрын
Would love to see what's inside to see what makes the magneto work
@robackrelll6 күн бұрын
Yes, do a full restoration for your wife she would love that .
@msmith50306 күн бұрын
Hi Adam. I reckon you should the the crossly as is. The original paint is there and it looks real cool. 😀
@deansponenberg83436 күн бұрын
Once again you lucky sod Adam, everytime I rip down a maggie I end up having to have the armature rewound for spark
@joesangalli8827 күн бұрын
I miss the Welcome to the mancave opening. You must do a new one.
@matthewhibbs96025 күн бұрын
Don't forget to put the copper washer back under the nut 👍
@christophergrimes127 күн бұрын
I think that the Crossley has had a rebuild or restoration at one point Adam and is all clean inside
@nigehomer97447 күн бұрын
As this is a potential replacement for Rachel's engine, I think you should go the whole 9 yards with it. It would be a lovely token to give back to her. She bought an engine to experience your world, maybe she could do bits of this engine with you, as her health allows.
@rogersmith25107 күн бұрын
A nice new paint job would look great 😊
@brianwilliams83616 күн бұрын
Adam , I'm a recent subscriber I see you trying to grease your lathe , DONT! those are oilers , you need a myford oilman and clean any grease from bearings
@nigehomer97447 күн бұрын
I can't help thinking that it's been mag issues that have resulted in it being a low hour engine. Maybe the first mag failed, infant mortality, then other second hand ones failed too.
@robertwilson937 күн бұрын
How come most of the screws nuts and bolts you take off seem to come off so easy,most of what I get my hands on have corners rubbed off screws with slots buggered up.
@elliotfuller47837 күн бұрын
The mags you’re trying out are ML Lister magneto’s im pretty sure i spotted a BTH mag when you got the collection of magnetos from Kent. The Crossley should be fitted with a BTH or Hills bro’s magneto.
@JohnSmith-gv8kt7 күн бұрын
PAINT IT ADAM..JOHN SMITH
@anthonyhall28477 күн бұрын
full clean up and paint for it
@ChrisCharles-et2xk7 күн бұрын
new paint job for mrs. mancave
@iansmith73696 күн бұрын
Smarten it up go on go on go on
@marksmith-ew7ir7 күн бұрын
The spark tester place a non malalic shield near the spark plug side to see spark in bright area's for camera to pick up
@baldanddangerous15726 күн бұрын
Please Do a Proper Resto strip Down Repaint
@johnplatt83696 күн бұрын
Think it's got to be a rub down job Adam after all winter is just around the corner just think of them winter days in your nice warm man cave..... 👍👍👍👍👍👍👍
@matthewnaylor44127 күн бұрын
Isn't there a carbon brush under those face cam type points? It ain't gonna play well with grease.
@EngineVids7 күн бұрын
Dont paint, check the mag gear it looks like it is wobbly the key may need more work. I don't think grease is good on the points area as i think there is a carbon brush.
@PaulALeader6 күн бұрын
I think as it is a replacement for Mrs Mancaves it should be her choice