1965 VW Beetle Restoration - Metal Fabrication Wheel House!

[@CTmoog]

airkewld.co/CT1 - I've teamed up with Pete at Airkewld to help move this project forward. Please help support the channel and use this link to learn more about Airkewld and all the awesome products they make for vintage air-cooled VWs

[@lennieclifton7386]

if you watch bad Chad he would gave you good pointer

[@jamesmorris7074]

You are doing well on the project. I would like to see you “cut and buy” like Fitzee does. You might want to get some clecos to fit the pieces in temporary. I always shop Airhead parts, they are a good source for my single cabs and 11 windows. Jim in Charleston

[@jamesmorris7074]

Problem with Chad is he doesn’t clean all the metal befor he welds. Fitzees your guy to go to😊!!

[@nikolaostsouknakis685]

Good Work!! Very Professionally!!! You are my friend!! Fun!!!

[@mrbrisket6794]

I have been an auto body tech for 38 years….you are doing a good job,I like your videos

[@CTmoog]

I really appreciate that man! =)

[@nicklomas1044]

your work and confidence has come on leaps and bounds,great progress

[@earlsmithson4749]

CT, your vids are like a Spaghetti Western. “The Good, The Bad and the Ugly”. I enjoy the fact that you show it all and this is a real world restoration. Keep ‘em coming!

[@CTmoog]

Thanks Earl! =) I like that! I try to keep it real my friend.

[@khalidelkharbachi6171]

Good work you are a professional 💪🏻 greetings from Amsterdam 🇳🇱🌷

[@antoniorivera6187]

Very nice job CT for someone that is not a professional welder your doing a great job awesome 👍🏻👍🏻👍🏻👍🏻keep up the great job

[@Pexyz]

Once again, very well done!👍 //Peter

[@s.h.5932]

Great job. I'm happy to find your channel. Greatings from Germany

[@aquafishholicinsydney7478]

You're very professional bro.,I like the way you do your job

[@kaptainkirk719]

That helmet is perfect 👍

[@caseyspirit9385]

Glad to see u getting into the actual panel work for these. Looks good. Keep on trucking!

[@macstone9719]

It seems to be cooler weather now. Imagine all that work in the summer heat.

[@santosestrada6135]

I LOVE THE IDEA , YOU ARE A GENIAL, EXELENTES , THANKS BARY , congratulations , I love the car .

[@justinsmith847]

I'm really enjoying this build one day I hope to have my own vw beetle can't wait to see how this turns out

[@TheYakubh]

I've never been so keen on a KZbin restoration work and I've followed your work with so much attention

[@CTmoog]

Thank you! =)

[@Doubleodude]

I’m super proud for you. Your becoming quite a craftsman.

[@CTmoog]

Thanks brother!

[@leonardo57]

I think you doing a great job, in Holland we say that guy has two right hands he can make everything👍👍👍

[@CTmoog]

Thanks Leo!

[@MikeMoose67]

Awesome video great very thorough this video will help me tremendously ….I had the pleasure of meeting Pete at airkewld on Monday as I was in Phoenix for the race… Very cool folks at AirKewld

[@Risidian]

Красивый автомобиль! Превосходный мастер! Внимание к мелочам! Приятно смотреть!

[@tomdale1313]

"LETS DO IT"... Now you're getting somewhere, less talking about it more actual fabrication/welding...deep in the heart of "TEXAS", tanks for sharing

[@robertjean659]

Nice job CT, your getting better every vid. Just remember measure measure measure before cutting, will save yourself a bit of work. 🇦🇺🇦🇺👍👍

[@hded06]

Excellent Video!

[@CTmoog]

Thanks man! =)

[@robertsimmons1716]

You’re a metal artist!

[@CTmoog]

Thanks Robert! =)

[@SAPOCAPU]

Welding = practice! You should take advantage of this project and stop welding sheet over sheet and try top-top. Results are better and also protection against future corrosion. Very nice progression, weekly waiting for new episodes.

[@fabriziof4366]

Bravissimo!! Ti seguo da Roma, Italia!

[@apunderwaterdistractions9865]

Look at you becoming a metal man, great job 👏🏼

[@CTmoog]

Thanks man!

[@I-apologize-in-advance]

Looking good dude!!! Mike is a great Guru to have

[@dannyfoust3123]

With your tool's and your patience, the bug is really taking shape! Great workmanship on the build. Your steps speak for themselves. Awesome work CT'.

[@CTmoog]

Thanks Danny! 👍

[@anibalbabilonia1867]

Love it! It’s looking great!👌😎👍

[@joerangel611]

CT Good morning. Thank You for sharing this video. I usually watch your videos before I go to Church every Sunday. I guess I am learning about You. I am telling myself, CT must have some sort of college degree, and surely, He has mastered his skills in some other discipline before developing his skills with VW car restorations. It is a great video, I think you chose the best approach for this task. I encourage You to keep restoring this great car

[@CTmoog]

Thanks Joe! I appreciate that. I've lived a few lives my friend! =)

[@ronburgandy74]

Howdy I am the Bugman from North Carolina and been working on bugs now for 60 years. You are doing a good job so keep it up. The left door probably should be replaced but to the bottom rotted out as you will need this to be good to support your door seal as you well know. Also when you put the rubber seal in the door may have to be adjusted again. God bless.

[@noordcop1]

It's great to see you having fun messing around. You are almost at the point of starting a new project. LOL......

[@ericcainer7755]

Hi CT. Wonderful work keep it up. Love the Helmet!

[@CTmoog]

Thanks Eric!

[@graemelliott3942]

Hi CT! What a great job! You’re on your way to becoming a great fabricator! I like the banner Ad!

[@richardgordon4032]

Awesome video and sheet metal / welding work, CT. For your first time doing this level of work, you should be proud. As a regular viewer, I like others here, find your videos nicely balanced between doing and sharing. Looking forward to your next!

[@housepumpinpc3983]

Great job CT. Forget patina. Paint. Too much work to not paint it now.

[@Slick56]

CT you can just hammer and dolly that lip at the door pillar when you pull the door off again to work it. I am working on these same areas right now on a 66 bug I'm doing. Between You, Mike F, Fitzee and Darren you have me rolling and answering my questions along the way. CT you keep it real my welding skills are on par with yours but its getting the work done and your gaining some serious VW street credibility with this project.

[@CTmoog]

Thanks Rob! I appreciate that man! Those guys are the best. We couldn't do it without them. They paved the way for us. =) Keep on rocking with the 66 my friend!

[@AndrewHCann]

Excellent video CT :) your doing super job to this classic car and nice metal work 👍! Work in steps just do beads on connect dots welds when weld to keep strong to and grid light done ✔ 👍 💪 keep strong forever too!

[@richardbriansmith8562]

Awesome Video CT

[@eugenebaroni1298]

Great job CT ... Keep up the great work 👍

[@tonychamberlain8057]

Looks good mate

[@CTmoog]

Thanks Tony! 👍

[@craigcervenka7605]

Awesome job as always!

[@adolfomello5343]

Ola meu amigo.Parabens pelos classicos e inteligentes videos. Assisto sempre com grande admiraçao ..Qua DEUS te abençoe.

[@juniorclassicvwbugs924]

Hey brother I think you are doing a pretty good job. Plus the satisfaction of you doing it and every day mastering some new is worthwhile the effort and work you put into it.

[@JoseSanchez-ns7vn]

You are doing a great job, congrats, keep doing

[@jamesfreeland3137]

Getting there. It sure is rusty that old bugget. You'll figure it out. :) Hi from Berlin in Germany

[@NwoRun]

Great progress

[@richardhill4862]

Things are getting better, your breaking down the project into section is smoother, and the work area is now work friendly. The door worked better when it was lifted, I think I would weld the inside when it's up.

[@CTmoog]

Thanks Robert! Yes, things seem to be working out! =)

[@notthisnotnow2568]

Looking good. Great job!

[@j.zingler6735]

Das ist mal nen heiles Radhaus .Kompliment!

[@geraldharkness8830]

painstaking work but well worth it! good job.

[@thomasweatherford5125]

Great job my man! Very inspiring 😊

[@chrismooney225]

Keep going looks great

[@Mikefngarage]

When you sent me those pictures i knew it was cut too high. It just didnt look right. Best way out was what you did. Split it and drop that part down. when you laid the one piece over the other the thickness of the metal needed to be accounted for you would have needed to measure from the bottom of the new part not the bend in the corner.

[@CTmoog]

Thanks Mike!

[@joseeduardohortacelso2214]

Good job, man! I'm following your project from Bauru/SP, Brazil.

[@RESTORATIONRESCUE]

Good job on the video. It looks pretty good. Your welding is coming along pretty nicely. IT takes a lot of practice I am learning how as well and your is getting really good after not welding for a while like you said!

[@carlosdesaoliveira3194]

Excelente trabalho, parabéns!! Grande abraço!!

[@worthmor5146]

Looking good!

[@michaelmurphy9593]

Well done you have come a long way from the dragon

[@wagnerrodrigues1578]

Parabéns está fazendo um bom trabalho sou do Brasil e acompanho seu trabalho desde o Karmanghia

[@AlexxBulka]

Great job!

[@amcargltd9784]

Enjoying the series and the detailed video editing. Keep it up please, my beetle is pretty rough so everything you're doing I'll need to do as well.

[@CTmoog]

Thank you! =)

[@darkfactory8082]

Lookin' good, things are coming together, I'm happy you share it all, so we can see also the not so pretty part of it.. 😉 You're doing great, tools do help a lot, but you can do much more with the most basic tools you have. I would say that you're holding the seam zipper in hand at 29:25, just grind a smidge off the pointy side, so you get a little wider flat end, make it blunt and pair it with a dolly that fits the best. Let's be honest, you very rarely need a pretty sharp end on the hammer for bodywork, because usually that's the dolly's job to keep sharp edges. For easier access, remove the door. I know, it's a rollercoaster with the doors on and off, but it's worth for ease of access. 😊 We're ready to see more, Keep on, no turning back.

[@dave1secondago]

nice fab work bro i like

[@verseb1]

good work 👍

[@markayers8663]

Doing good job on it

[@thomasfridvall8396]

I really like what you are doing. No short cuts, which would be easier. Seen it, done it 😢 and got that t-shirt. But not worth it. So well done! Keep doing what you started. Well performed videos. The Swede 😊

[@djambrosia]

Probably worth popping the wing back on to confirm the new bottom captive nut lines up before completely welding it up. When you do the other side give the Fitzee's "cut and butt" a go. I tried it on the bottom of a Karmann Ghia engine lid and it's surprisingly easy.

[@garytims9261]

Your welding is improving every time. I can see you are gaining confidence.

[@davidnelson6893]

Looks cool a great car that is

[@moacirjosefranca1525]

Você é muito bom. Sou do Brasil, mas gostaria de fazer um estágio contigo para aprender. Admiro sua técnica e suas ferramentas ajuda muito no trabalho. Parabéns pela sua arte e profissionalismo.

[@stewkeene]

Considering how it appeared when you bought it, it’s come a long way 👍🏻 it will be really fun to see you finish the body work up because then it’s just re-installing stuff. I honk if you do the white paint first, then some really light yellow layer and then some of that rust color it’ll really look natural rust. Have a great Day! 😊

[@BigDwww]

Great work CT , i would use a weld through primer before welding , id use seam sealer on non visible areas , and a fibre glass stand filler on area you can see , sand down and finish with normal filler on top

[@goblinking4995]

You do good work for trying they have a sander gride that will make it smooth and get the rust off a harbor fright

[@jasonott3051]

One word of advise well maybe 2. Put a little gap between the but welds and use weldable primer between your joints. Love your videos!

[@marcosdesousaribeiro3698]

Parabéns pelo trabalho ficou ótimo 👏👏

[@markymark6089]

Great job ct you’re doing great Just be carful grinding and sanding to much on the steel you can reduce the thickness of the steel Keep up the goood work

[@armandovazquez584]

I like,good job.👍

[@Mikefngarage]

OFTEN THE STUDENTS do better work than the teacher. ha ha. Great Job.

[@CTmoog]

Thanks Mike!!! 😃 Couldn't do it without you brother!

[@snowdogs59]

high praise from the master!

[@paulgregory2507]

very interesting, entertaining.

[@johanlemmens528]

👌Nicely done

[@marcioteixeira7751]

Parabéns ficou muito,bom.!.Brasil RJ !

[@StanleyKubick1]

super enjoyable. just found this channel and already hit the sub button

[@locosporlosvolkys7640]

Saludos!. Estás haciendo un excelente trabajo. Cuando se hace un trabajo así pasan muchas cosas que solo las sabe el que ha pasado por lo mismo. Hay que trabajar con los descuadre de piezas y del auto y estas venciendo los obstáculos.

[@curranhouse]

Looking good, whack some welds on the inside between the top of the heater cahnnel and the original metal - where you said to seam sealer. Then seam sealer it. :D

[@Reader.of.infinity]

I like the idea of a video being about one section done and don’t mind if it is going to be longer video, cheers and god speed

[@best1yet]

Forgot to connect your heater hose...

[@hussamal-takriti8792]

Good job 👍

[@eustaquiokiller]

Would be nice repainting it completely factory new, it will look far better than with the patina

[@jimsmitn7569]

I get so stoked when I see a new video of yours pop up. Keep ‘em coming brother!😊👍

[@CTmoog]

Thanks Jim! =)

[@jimsmitn7569]

@@CTmoog Very welcome bud👍

[@lenovo7980]

Good Job...

[@CTmoog]

Thanks Len! =)

[@elaineferreira2980]

Great job.

[@patshes1951]

Just do it bro. Where is that Kharmann?

[@terryraymond7984]

Im no professional welder but that looks good but a little project to learn on like you mentioned, looks good though

[@pierremalo8435]

Hi CT! Welding tip: Don’t weld one hole after the other. You are over heating the sheet metal. The tin is so thin that it’s losing all of it strength. Weld from one end to the other end and so on. Regards

[@DubWerks]

Looks good! In the wheel well, use a fiberglass reinforced filler instead of seam sealer. You can smooth it out and you'll never know. I'd grind the welds a little more too.

[@andyhamilton8940]

I admire your tenacity and ability to re-channel your frustrations. How does your back and knees hold up to all that though?😮

[@jwester7009]

To my knowledge you should always use rust preventative primer before applying seam sealer

[@mateusfernandes3593]

Amazing 😍❤