Custom 12v Install - MW Toolbox 1000mm canopy on a 79 Series Single Cab Landcruiser.

Andy got a off there shelf 1000mm canopy form MW Toolbox. Then set about kitting it out for off grid camping while still having plenty of tray space and light enough to still tackle the tough tracks.
Gear used:
REDARC BCDC 1240D charger
Bushmans 85l Fridge
Kings 30l drawer fridge
XTM 900mm Drawer
Hardkorr tri colour lights
MW Toolbox 1000mm canopy
Links:
Merch store - mudmodsandbeers.com.au
Facebook - / mudmodsandbeers
Insta - / mudmodsandbeers
Current mods:
2019 Landcruiser 79 Series Single Cab w/DPF
Canero Industries Custom Canopy
MSA Drop Slide
60l Waeco Fridge Freezer
Redarc BCDC 1240D charger
100AH Slimline AGM battery
200w Solar on RTT
Toyota Genuine Bullbar
ARB Solaris Spotlights (Flood and spot combo)
GME XRS UHF radio
The Bush Company DX-27 Roof Top Tent
The Bush Company 270 XT Max Awning
Safari Armax Snorkel
ARB Old Man Emu 2" Suspension lift and steering damper
305/70/16 BF Goodrich Muddies on Sunraysia steel rims
#landcruiser #79series #singlecab #toyota #mwtoolbox

[@iantooke3549]

Hi hows the canopy going after year are you still happy that set up ? Look do same on my single cab dmax cheers Tookie collie wa

[@MudModsBeers]

Honestly, Andy ended up selling it for a 1700mm MW canopy. The canopy was great, no issues, just too small for his needs. He bought it initially to save weight as it was permanently mounted. The problem was storage, with a single cab and a small canopy he found more often than not that there wasn’t enough dry storage. He also wanted to be able to drive the hard tracks with as little weight as possible on board, hence the jack off. Both MW’s though have been great Thanks for watching! Richo

[@iantooke3549]

@MudModsBeers thanks reply I'm.look at 1500 canopy leaves me meter space on rear keep all weight forward rear axle cheers

[@ottouring]

Hi, Great video. I used 40mm aluminium square for my base. Just thought you might like to look at my canopy set up and 12v set up for ideas and feedback. Cheers Out There Touring

[@MudModsBeers]

Hi mate, thanks for the message, the 40mm is a great idea, I used something similar on my Hilux build. Andy's was a bit different as the lip was 90mm from the base, so timber became the most cost effective option for him. Good luck with the channel! Richard

[@ottouring]

@@MudModsBeers Cheers mate, I appreciate the reply. Have a great day Out There Touring

[@ottouring]

Hi, Just letting you know an awesome cook up being released tomorrow You need to try this Cheers Out There Touring

[@MudModsBeers]

Looking forward to it!

[@danielfathers5174]

@MudsModsBeers do you have a link for where to buy this canopy?

[@MudModsBeers]

Hey mate, sure do - www.mwtoolboxqld.com.au/product/flat-aluminium-mini-canopy-1000l/ Thanks for watching!