CUSTOM EXHAUST TIP BUILD

Custom exhaust tip build for hummer h2 amazing ingenious exhaust tips made by me in my garage with basic tools, These custom exhaust tips were first thought up over a year ago when i first started my hummer rebuild a year later and my idea has come to live looking better then i ever could have imagined. The new exhaust tips will be welded onto my new exhaust system once new Engine, Turbos, and Super charger are installed.
please like and subscribe to my channel
/ @builditwithrob
www.builditwithrob.co.uk/
/ builditwithrob
/ builditwithrob
This video is for educational purposes only, Build it with Rob assumes no liability for property damage or injuries incurred as a result of any of the information contained in this video. Use this information at your own risk, Build it with Rob recommends safe practices while working on vehicles, machines, or power tools seen or implied in this video.Any injury loss or damage that may result from improper use of tools, equipment or from the information contained in my videos is the sole responsibility of the user and not Build it with Rob
Please leave questions and comments below, hope this video helps somebody
Disclaimer All information is for educational purposes only and is the personal view of the author

[@j444nsy4]

Rob must hand it to you mate your pretty handy . I assume your single. If not you got the best missus in the world.

[@builditwithrob]

Thanks bud

[@j444nsy4]

I watch all your vids mate. Love it!!!!!!

[@builditwithrob]

@@j444nsy4 plenty more to come bud

[@dorothymerrell1125]

"Call me crazy, but there's nothing more relaxing than building your own custom exhaust system.

[@Big.D.]

Dude the freenand angle grinding is wicked impressive !

[@builditwithrob]

Thank you bud

[@Rodney75144]

It looks dope as fuck for sure man you’re a bad ass ..

[@leonardodecaprio5416]

Exhaust turned out great, appreciate it man. 👍🏽

[@ivanamatias8861]

Keep up the good work. Been dying to see what you would do next.

[@christophkustler2338]

Such a kick ass build! great work!

[@delmanpronto8702]

You are a badass fabricator, great skills!

[@myamazinglittleworld5673]

Man, oh yes those tips are really insane. 💥💥💥

[@brighton_locksmith]

Mate, they look unreal!! Can’t believe you’ve taken it out in the snow and didn’t show us more 😫 I also agree regarding using your phone to record instead of the go-pro!! I do the same now 👍🏼

[@darcelstress2774]

Awesome 😎

[@andrewfrench1941]

Awesome exhaust tips you did an excellent job m8

[@builditwithrob]

Thanks bud

[@patrickhannon2069]

Absolutely top notch work man!!!

[@builditwithrob]

Thank you Patrick

[@rajubansal8364]

You make great videos. And you are well spoken and nice to listen to.

[@builditwithrob]

Thank you

[@jaydan6019]

Your video and car projects are so inspiring

[@builditwithrob]

Thank you Jaydan

[@TonyMontana-mv9ez]

Nice

[@bohemia8380]

Nice build!💯

[@builditwithrob]

Thank you

[@pm1104]

Such creative artistic talent ……..!

[@builditwithrob]

Thank you. Many more items to make

[@geef9027]

You did a brilliant job on the bending machine Rob, if I wore a hat, it would be off.😃 And the paint finish on the exhaust box was like glass, almost a shame to cover it with your cut out designs. The whole finished job looks amazing mate and a 'well done' falls way short. Enjoy your big blue monster mate, it's well deserved.

[@builditwithrob]

Thank you Gee appreciate that

[@deepocean4043]

Sounds great and I really enjoyed watching the process.. you make it seem simple. Merch idea maybe? Do what you can, with what ya got! 😁 it's like a DIY Anthem

[@builditwithrob]

Thanks bud appreciate it

[@CraigNiel]

Ohhh those last few seconds in the snow, you teasing bastard! lol

[@builditwithrob]

I got some good footage mate

[@CraigNiel]

@@builditwithrob I've been dying to see it driven about for ages. I seen you blast off in the snow and then it ended I was gutted! lol

[@devenp1601]

what did u use to stick the blue pieces on

[@minimalism23]

👍

[@clossuka]

Rob because of this video I’m determined to try and do this myself for my truck only one question how to make the overlay plates bud

[@builditwithrob]

Hey bud I had those plates laser cut at a local engineering company

[@Hataker2]

I'm gonna DIY Build one of these and install it in my 2023 Ford F250 Limited, 2023 Lincoln Navigator Black Label, and 2024 Ford Mustang GT but all of them are Stock Exhaust

[@brycebyler7248]

where did you get the adapter that goes on the end from?

[@Mannie2k]

2:52 - where the spare washer should have gone!

[@clossuka]

Can someone please tell me where I can get the overlay plates that go over the exhaust tip I can’t find a diy or a page for them

[@RS-jz4pg]

Rob “is she on the road already?” blimey mate if she is then its time to touch on the savings account. The insurance is going to ask you to drop your pen on the other side of the desk and without going around the table they are going to ask you to pick it up (you know what i mean) and then your going to have to weld yourself together like the exhaust pipe 😂 They are going to love every bit of it, especially after those custom exhausts. Or you tell em if they give you a discount you can advertise their company on the vids and tell them about your channel and views etc 😉

[@builditwithrob]

Not a bad idea that bud It’s back on road now I just need to declare modifications

[@RS-jz4pg]

@@builditwithrob yhhhh thats where the whole adventure for you begins 😂

[@justinteel7172]

How thick was your sheet steel. I plan on making my own exhaust tips for my duramax and Cummins

[@builditwithrob]

Hey bud I used 1.5mm steel

[@lockodonis]

Great vid…. Love to know how much that beast will weigh at the end of the build…?

[@builditwithrob]

I’m scared to weight it lol 😂

[@lockodonis]

@@builditwithrob I’d be scared of your fuel bill also… 😂

[@builditwithrob]

@@lockodonis 7mpg on a good day, £128 to fill tank and I get 190 miles on that

[@tristongregg971]

I am looking to build a 10" tip for my truck do you happen to have any dimensions or blueprints for how I could make it?

[@builditwithrob]

Hello friend I don’t sorry

[@killiancaruzas3187]

What were your welder settings for the exhaust? Min/max and wire speed

[@builditwithrob]

Hi Killian Minimum setting wire speed on 4 I believe 25 bar of gas

[@joshhammons22]

Could you send me dimensions for the whole tip?

[@jondelano7332]

How thick of steel are you using?

[@builditwithrob]

Hi Jon I used 1.5mm steel plate

[@mrbowling8539]

What size were these and dimensions of everything?

[@builditwithrob]

Hello friend if I remember rightly it was 7” dia

[@Steve-Quinn-YC-GaSC]

Where are you from, the accent seems familiar

[@builditwithrob]

Hey 👋 I’m from Leeds

[@Steve-Quinn-YC-GaSC]

@@builditwithrob thought so mate, I'm in wakey

[@hectorvasquez77]

Homie forgot the shakalaka

[@brendenparker673]

dimensions?

[@builditwithrob]

Hi Brendon not sure what the dimensions were sorry

[@sulemanahmed6110]

How much for one of these for my Jeep?!

[@builditwithrob]

Sorry bud I don’t make these for others

[@sulemanahmed6110]

@@builditwithrob ok👍🏼