Custom Forged Framing Hammer

[@ajreukgjdi94]

Those little floor-sitting table saws are the scariest piece of equipment I have ever seen in my life.

[@arnold8746]

You don't sit it on the floor bud. That's how all portable table saws were at one time. You just put it in your truck and set it up on saw horses, or whatever kind of stand you had to work with. They didn't always come with a nice little collapsible stand and wheels. Saws haven't always been so portable, chopsaws were the same way. Guys usually had a few sets of sawhorses and planks to set up a little cut man station at job sites.

[@ajreukgjdi94]

@@arnold8746 I know how they're SUPPOSED to be used. But I also know how the ARE used. In nearly every video they've appeared in (including this one), they're on the floor, and the person is leaning directly over the blade. You couldn't pay me enough money to use it like that.

[@clevernamehere7559]

You’d puke if you saw how the house you’re in was built then dude. 😂 The kind of folks that will nail themselves to a structure, pound a beer and go back to work. If they swing through the wall in clinic they’re gonna come out of pocket, no insurance. 😅

[@colbybyrne4080]

I used to send eighteen foot long two by twelves long ways through one of those things me and my buddy would fight for who got to catch cause you’ll get fucking blinded by the saw dust and the things bounce around a bunch

[@ripatv6506]

​@ajreukgjdi94 and that's why i constructuon it takes 🥜 to make the good bucks. How come i dont make as much as u do well bud because u a wimp. Boss waits for u to set up your saw 20 mins lol u not coming back the next day.

[@BrandonZombieII]

I've never seen a safer way to secure a handle to a tool

[@tristanphillips8937]

Tf do you mean, that’s how every axe and hammer is made with a wood handle

[@kadenNY]

Yeah, it creates a lot of pressure

[@blakestrike3905]

@@kadenNYngl, I’ve been seeing hammer heads come off. I prefer a wedge of wood w\a touch of wood glue. In a # pattern. They especially come out with 8-lb hammers

[@stevenbrown9883]

@@tristanphillips8937he’s talking about cutting off the excess at the top genius.

[@oldkingcrow777]

​@@tristanphillips8937you're right. How did I not think of that

[@davesiringo7147]

Imagine getting kickback from a flying hammer 😵

[@bephilz4349]

Yeah this dude has cahones making that cut 😂

[@jmh19878]

😂 oh man nope. Nope nope nope. Pucker factor was real there.

[@lopsidedc0rn875]

Sparks at least twice while cutting with the table saw "I didnt knick the chrome at all" 😂

[@abrahamgalarza5421]

You are blind my friend and I’m wearing glasses and I didn’t see no sparks

[@rektrainmeme5808]

@@abrahamgalarza5421 theres definitely sparks, you can also see him whack the chrome with the hammer xD man definitely nicked the chrome

[@creeperbombrf3898]

nah bro he's just cutting that 5 minute crafts wood

[@dupedmek9658]

the “sparks” is just lil chunks of wood

[@brisk.1604]

Smashing those 2 hammers together pretty much I’ve never seen such a bad job at fitting a wedge in my life. Tool.

[@justAnotherMike82]

where's the boiled linseed oil at?

[@DirtySouth69]

Wrangler star got it all

[@rustbeltmachine]

National shortage. Cody is drinking it.

[@mofo264]

@@DirtySouth69gotta get it from his grandpa

[@bigboreracing356]

I Used Engine Oil on my Vaughan. It looks just as good as this Hammer. Check it out.

[@onradioactivewaves]

"Let me see" said the blind carpenter to his deaf dog, as he picked up his hammer and sawed.

[@not.a.comic.]

Ah my grandpa used to say something like that. Thank you for the reminder 🤝

[@seandavid288]

Dude could have used the chop saw behind him to make a safer cut. Instead he wanted to try and flex by using the table saw. The ego is a powerful thing

[@leequilter1995]

Both equally as dangerous what a dumb comment

[@zzzz1192]

and hammering items in your hands is pretty wild too.

[@guyod1]

stupid comments like this is how you tell who is this desktop carpenters.

[@seandavid288]

@@guyod1Sure thing buddy! I’m positive I’m more appt than you and my personal workshop would be something you could only dream of. I design and build my own cabinetry and do rough framing as well. I live by the motto work smarter not harder and end the day with the same number of fingers I came in with. The gentleman in the video, will one day learn, his methods are flawed but his safety isn’t my problem. Your comment sums up the stupidity of internet trolls who think they know more than they do. Go find some spare parts to fix yourself!

[@seandavid288]

Justin your non existent esponse shows who the keyboard warrior really is. You can only muster up a sentence and lack the intelligence to make a coherent argument. You should have been a stain on mommy and daddy’s sheets

[@awpzaint4noobz]

Bloke indeed nicked the chrome

[@petertzouvani9223]

100 percent right as his beginning the cut I only rewatched it because he said he didn't nick the chrome

[@Stoned_Tortoise024]

You can hear it

[@rektrainmeme5808]

@@Stoned_Tortoise024 also plops the hammer straight onto the chrome several times

[@Matt-vk2ed]

As a carpenter that was scarry. I'd have used a chop saw or hand saw after it was secured to a chop late first.

[@Stoned_Tortoise024]

Must be a new guy cuz idk anyone that would ever do that with a table saw unless they are a little special

[@flusteredmustard8004]

Worried about nicking the chrome...can't wait to see how it goes once it's put to use lol

[@hankmcdavid722]

Guy has a $300 hammer doesn't own a handsaw......

[@shinigami-man5727]

Seriously though!

[@outkast937]

Awful expensive hammer to not have any waffling

[@DJPhatPhuck]

He also called the polished finish “chrome”… clearly he isn’t the brightest.

[@JT-hs3pe]

​@@outkast937you don't need waffle if you can hit a nail. And you can't use a waffle on decking, azek, etc

[@tightbhole420]

sure is casual in the comments section 😂

[@kenmccrady1228]

Forget the HAMMER!! What about that T-SHIRT?? METALLICA 🤘🏼😆🤘🏼

[@GreyerShade]

"They call me 4 finger Freddy...... Why?.... I'll send you the link." 🤣

[@lumpy6]

"Good looking hammer" really says it all.

[@gerardojimenez5927]

Just what I’ve always been searching for a good looking hammer. Wow!

[@fedpaul286]

“That’s a good looking hammer right there” Proceeds to not focus the camera on the hammer

[@alphabravo6337]

Beautiful hammer.

[@baldwinbeardsley901]

Wow! Beautiful hammer

[@danbenson6389]

This guy ,,, horsing around on the job again.

[@DATDUDEJT09]

My eyes closed about twenty times watching that metal go so close to that blade lol 😂

[@pb7133]

Retired carpenter here. Can’t even count the amount of people who lost fingers/ accidents on a table saw.

[@davidmiller9220]

I almost shit myself watching that.

[@mjnelligan7288]

Terrible ideas to ever cut anything without the fence

[@petkoe100]

I cut without a fence all the time. Also trimmed both index fingers

[@shanedavis9440]

Nice work Gord

[@djaxclips]

That possible the safest thing I've seen on KZbin 😂

[@SparrowHawk183]

Some people like to watch their entire life flash before them on a regular basis. Shame their lives are so short.

[@CoopJHog]

Had my safety squints on just watching this

[@OneLovefromOregon]

You are dancing with the devil doing that my friend.

[@chapster85]

Im still waiting on you to post the application for the build challenge or do you hand pick the competition every time?

[@buckfiden1228]

He laughs in the face of danger😂

[@BillBard]

Who else safety-squintin' just watching this?

[@stevenstrandberg4258]

👍🏻💪🏻👌🏻🇺🇸🦅🗽, love the freestyle cut!

[@t9056]

this guy is a comedian right plz tell me hes not for real

[@brionbutler7890]

When there's a right way, and a wrong way to hang a hammer. Ive never seen it done wrong until this.

[@stevenblake6939]

Well he did it right so I guess you've only seen the wrong way to hang a hammer..

[@ztheblacksmith]

I personally don't care what you do but in my own experience I have found that getting a really good fit without a steel wedge is better then down the line when it get loose you can put a steel wedge in it. I have been using the same rounding hammers that I have made and handled for years without steel wedges and almost never have had one come loose. I don't want to start an internet argument just thought ide share some knowledge.

[@roberthobbs6318]

I thought you should NEVER strike a hammer with another hammer?! 🤔 (I'm just being a smartass)

[@sidknee4975]

Merican education in full swing right thur.

[@w.k.2239]

Das ist noch ein echter Kerl, der hat noch Mut.

[@MrJustincrowden]

About cut my thumb off with a piece of hardwood flooring when I was 19 at the joint a centimeter to 2 centimeters out the end and shaved the bone. Scared hell out of me. I thought my thunb was laying in the yard somewhere. Did it that morning got stitches went back to work. Learning experience 😂

[@stevensims7687]

That is the most beautiful work grade hammer I ever seen in my life I would not even use it if I owned it I would display it right next to my Thors hammer replica

[@420face]

“Didnt even nick the chrome” ya but it’s a a hammer so…. I think it’s gonna get a lot of ‘nicks’. Sweet hammer tho 👍

[@owenmonaco7817]

No knurls... have fun!

[@stevehunt9703]

Maybe youtube should have a special shorts section called you twit. But then again there would be so much competition to be featured on it.

[@MattyPizz0900]

Why wouldn't you put the hammer butt end down to get a solid hit that was ruff to watch

[@DDT_KDog]

Maybe invest in a coping saw? Save a couple fingers 👍

[@waitemc]

Love a damn good hammer

[@undaware]

Should sit the handle on something when setting wedges. Inertia can lift the head.

[@ericerto8250]

Oh no you made the internet really mad because you hit a hammer with another hammer😂

[@nickfish629]

I have the same shirt! 🤘

[@AVT-Assassin]

Best thing about this video is the Metallica shirt...

[@user-kz9hf9hi8x]

His t-shirt choices tell me that this is my kinda guy

[@davidvega7365]

Pay attention Brian, walking with the devil

[@danielmize6567]

Do not lend it to Larry...you know how he is...

[@branonjohnson8617]

Smooth face framing hammer??? Looks cool though. Hope you have more handles if your actually gonna use it... i gave up on wood handles. They work good, until they dont

[@holykrap8407]

Rumor Has it his insurance canceled him the same Day 😮😂😮😂

[@ribbledean4111]

Gay carpenters and their polished hammer

[@bobbythebuilder7109]

For the guys that like Stellito.. you will love these! This is a kinetic customs twisted framing hammer. But they have many others including titanium handles in many colors.

[@alristitov]

Just what in the hell is this? You have about 15 OSHA violations on the table saw alone.

[@futagmuaddib6525]

Put that pretty thing back in the truck real only work out here lol😊

[@jasonenglish6770]

Smooth faced framing hammer 😅

[@Scarecrow976]

I was waiting for you to put your purse down and hit the damn thing. Tink tink tink tink tink😂😂 just kidding good job

[@Joethetoolguy]

Shiny and chrome! Witness!

[@paulsbuildingandpropetyyma544]

Wood doesn't give off sparks .. Metal does..ya baby you messaged up ..

[@meandego]

I'm surprised he's still alive

[@demientol4087]

Thanks for proving that the tools don't make the man.😂

[@tenchi144]

So if it takes a hammer to make a hammer. How was the first hammer made?

[@andrewreedy8280]

Oh god that had me sweating

[@bruce9073]

No waffle that shits gonna slide right off the nail

[@jacobstanfield1564]

I may be wrong but isn't a slick striking surface a no-no? As as nice as it looks, no waffle, no traction.

[@mech0p]

does it help me hit the nail head more often? if not its a waste of money lol

[@TheJiminiflix]

Is it to be looked at on a shelf or used ?

[@therallyguy1]

Bad ass hammer

[@russellphillips1589]

This is why we have warning labels

[@zeddoreo]

Hey guys it's the future 3 finger Bob

[@kenea3226]

Framing hammer with a smooth polished face?

[@zeffster2]

Metallica t-shirt sells everything in this video

[@andyzagray7962]

When you have to use a hammer to fix the hammer

[@JohnAlexander-kl9df]

He must be a green horn.All his equipment is brand new

[@maver92]

I've never hammered a hammer. 😮

[@zmc50]

Didn’t Nick the chrome ? But aren’t you going to hammer nails with it

[@davidr8860]

All new everything hu ?

[@olivermcgill6454]

I love looking at the comments and feeling asured that this was scetchy as hell.

[@Bingbackguillotines]

If you need a hammer to make a hammer, how was the first hammer made.

[@LoneStarCannabis]

What came first the hammer or the hammer 😮

[@UnderbeIIy]

Why did this hurt to watch?

[@kevinn4038]

Just keep my Eastwing thank you.

[@davegordon6943]

That's sweet.

[@oderfhuerta6277]

I mean theres a perfectly good miter saw right behind you. This could of most definitely ended bad

[@BlindGuardian050]

That's a hammer for someone that wants to look like they work

[@JD-vk2pr]

If he was a carpenter, he would’ve put some waffling on that bad boy when it starts slipping nails, and you don’t like that

[@chongo7723]

On the ways you never want to use a table saw.

[@rondickinson1907]

Why chrome a hammer? Showpiece is no tool.

[@terryhall5507]

A smooth face hammer for framing?

[@nesbrosproductions1028]

Wait so you need a hammer to make a hammer???? It’s like the need to open scissors with scissors

[@zachariah1991]

Literally had a miter saw sitting right behind him

[@chuckbangers2590]

Home Depot run out?

[@mattsummerfield412]

you already had a hammer

[@justinklein3955]

I’d like to buy one of them