Customer Said She Smelled Something Burning!

[@Total6666]

The rubber bushing is on your bumper , in the middle , I saw it on the video .

[@cutum]

My knees and back would kill me if I crawled under there like that. U da man!

[@fshn76]

Always enjoy your videos. Never afraid to admit your mess ups. Bravo.

[@woodworkking1099]

Enjoyed the vid, thanks! Checking amps with blower door off will give you a false reading.

[@WallieGator]

You have a great work ethic!!

[@johncspine2787]

“Burnt Windings”..sounds a little like an album title..or maybe..a horror movie..lol..

[@jthonn]

Another great job, man those crawl spaces. At least that one had a good moisture barrier.

[@ADVANHVAC]

I don't envy your crawl spaces my friend. My knees are screaming. Here in Michigan mainly Basements. Good video!

[@HVACGUY]

This was a good one.

[@ADVANHVAC]

@@HVACGUY I can only imagine, here in a few weeks I will be in one. I haven't decided yet if I'm sticking my 19-year-old in that one. Either way, I will get some video

[@stephenbullock-yn3vh]

Great job Curtis

[@HVACingMyWay]

I always keep a couple old motor brackets on my truck from equipment we have replaced just in case something like that happens.

[@sknight0391]

I just worked on that exact same model unit this morning. Mine was horizontal in an attic. I don't like how that metal door cover (for the fuse block) falls down into the electrical compartment where the heater kit wiring is. 😎👍

[@HVACGUY]

It looks like it’s gonna touch something

[@tedhicks5431]

You ought to try a kids sled to drag tools and blower housing under the house i swear its sweet i used mine today had to drag my torch and nitrogen tank all at once If I knew how I'd send you a picture of the sled get 61 try make it easy as possible

[@brad6566]

1st time I've seen you in a crawl space. Atleast its a nice one!

[@jasonstewart5942]

The rubber isolator is on your bumper under the weather seal.

[@bill944]

Good eye. I was concerned when he said he was going to the supply house and had those pieces just lying about.

[@chuckquinn8026]

Yup. I was yelling at the video 😂😂😂

[@ronlovell5374]

​@chuckquinn8026 Me too!especially when he dropped the socket on the ground, dont know how he didnt see it? 😆

[@w1swh1]

A new one should have been fitted if not found.

[@bobboscarato1313]

I bet Curtis has happy to get out from under that crawl space! Nice work as always.-

[@edorofish]

13:10 we have a new housing area nearby where people basically live right on top of each other. They spent almost a million dollars for the homes and hardly have any land or space between the homes. I don't understand it.

[@Danielthornton61]

*Always keep some 3/4 inch rubber hose with you so that you could cut it to size and put it around the wires when running it through that metal like that (without a grommet). If the holes are smaller, you can always slice the hose lengthwise and squeeze it through the hole.* *I cringe every time I see wire going through a hole without a grommet. I've had many service calls where wires were worn through from vibration, eroding the insulation, and ground out the unit/ tripping the breaker.* *As for the missing motor rubber vibration dampener, the right thing to do would have been at least go to the hardware store, get some gasket material, cut it up in squares, build it up to height, and drill a hole in the center, to ensure that vibration/hum isn't going to go through the duct/house from the bracket being in contact metal to metal.*

[@chatrkat]

I wondered when you’d remember the blower screws. That crawl was a mutha.

[@alabamahvacprofessional2946]

A 3/4 hp blower motor is rare for an air handler. I keep a 1/2 hp standard blower motor, 1/3 HP condenser fan motor, and 1 HP Genteq (X13) blower motor in my van, and 99% of the time - I have what I need for any unit.

[@harrydickson4575]

Nice work 👍👍

[@adamrspears1981]

The only thing I would of done differently is I wouldn't of cut the ground wire on the new motor; I'd of hooked it up. Other than that, its a great video! Thanks for uploading it😊

[@davemckinnon5007]

Was that rubber stopper sitting on the bumper

[@HVACGUY]

Well, I see it now. But, didn’t at the time.

[@kens.3729]

Could be her Cooking in the Kitchen. 🤔😬👍

[@yz250a]

Curtis, I found the missing grommet: on the bumper under the weatherstrip!

[@jimglover1390]

Those motor bracket insulators do like to disappear sometimes. I've made replacements using compressor feet that I salvaged.

[@jasonstewart5942]

It sure looked like your bracket arms were still slightly loose the way you moved that one to get it to line up with a hole.

[@Eddy63]

Nice work as usual and switch ends on your boxcutter blade , seems a little dull Thx for sharing Curt ...

[@ferrit0691]

That's why I like living on the banks of the Hawkesbury river here in Australia 40 acres half a mile of river frontage and no one around me to be a pain in the ass me happy days.

[@pedros.c6742]

Good job

[@joshuaseaton4526]

Guys need to learn to run the unistrut perpendicular, then bolt it parallel. It only takes 10 more minutes.

[@MarkJones-no2zf]

Need to spend the extra money and put full basements in

[@joshuaseaton4526]

@@MarkJones-no2zf Or just spend a smaller fraction of money and make a 20 x 10 mechanical room. This attic, crawlspace, closet crap needs to end now.

[@kens.3729]

Year 2014 and under the House. I can’t imagine the Moisture under the House even with the Vapor Barrier. Metal is going to Rust and things wear out Quicker. 🤔

[@aceh1466]

Why did you remove the label!!! Should of just cable tied it up .

[@search_eternal]

Looked like that rubber thing you where looking for was on the bumper under the door gasket.

[@throttlebottle5906]

"burning smell" lol, there had to be smoke coming out the vents and surprised it didn't set of smoke/fire alarms.

[@donnyjackson1908]

Curtis, what brand is your favorite to work on overall?

[@jasonfreeman3089]

Hey great work as always on the videos! Enjoy watching you solve problems and learning myself 😀 Question about capacitor, got one at a rental that’s rusty so can’t tell the rating. What’s the best solution? I gonna definitely test the old one and get the next one up from current reading. It’s for the compressor, others separate capacitors, on older package unit. Thanks Jason

[@HVACGUY]

If you can still read off the compressor it should tell what size capacitor. If it’s a Copeland, and you can get numbers off of it, the app will help you.

[@jasonfreeman3089]

Oh ok thanks for the help. Yes it Copeland 👍

[@Hvac-dude]

We are soldering in school tonight we're doing a boiler

[@HVACGUY]

Nice

[@tombeilman5579]

At least the crawl space was organized

[@mitchcrowesr3976]

I see the missing gromet. Chassis and bumper in the middle.

[@AnalogueKid2112]

You know a house is fancy when it has three condensers

[@johncspine2787]

Be a lot fancier if the equipment wasn’t located in a cave…lol..

[@jima3129]

That sucker looks way older than 7 years to me. Grease dem rails with superlube, Curt. Works a peach. Keep a box of isolation dampers in the truck. They dry out and become useless when they get that hot anyway. Clean the wheel with foam before install, no?

[@Scott-hb8pu]

I always forgot to ask, but finally remembered. Why don’t you use a headlamp?

[@HVACGUY]

Sometimes I do. I keep one in my bag

[@Scott-hb8pu]

@@HVACGUYawesome! love your videos, keep up the great content!

[@markcotter2355]

Glad your back is feeling better, no way I would be having any fun under that house. good job Curtis. I noticed that unit looked like it had standing water in the bottom 4 inches? possible drain issues?

[@jima3129]

I think I'd want to know where that red clay dust came from. You may have nailed it.

[@stevofishell254]

In Tennessee code you can not mount a disconnect box on a unit or plenum box

[@dfwhvac]

Are you an owner operator or do you work for a company ? Love your videos and your van. The wrap is amazing

[@HVACGUY]

Owner/Operator

[@kevonslims7269]

That styrofoam was there from when the unit was shipped, they never took it out..

[@karellodewijks4971]

👍👍😊😊

[@MarkMclaughlin-qm8kq]

u ever find venomous snakes 🐍 under houses

[@tedhicks5431]

Looks as if its had 2" of water in it

[@nathen4021]

You deserve a nice house. Maybee its time for a career change whare you can make a lot more money. lol

[@wway2go68]

First