Customize Your Behringer WING Compact Faders

[@kcbnnews]

Thanks for all the tips on the Wing. My church is about to upgrade from an SQ5 to a full size wing, and I will be running it. We will use the old SQ5 as a portable sound system.

[@davidorlov]

Good call. I love the wing lol

[@leonelceniceros1550]

Hey Drew, would love a video on assigning a custom control button to lower the volume on a fx bus to a predetermined level. Needed for when a singer speaks between songs and the verb is too obvious. Also, a video on a “panic button” to bail on outboard processing. Turning on onboard bypassed processing. Thanks!

[@ard-janbarnas1739]

Great video. Can you demo DAW control on the Wing Compact?

[@markallen4127]

Awesome function. Drew- I'm trying to come up with a clean way to use the dn4816-O as a digital split to FOH console; I want them post processing, and also to be able to lower the output levels as to not blast the FOH inputs. Currently setup using user patches, but if you have a better idea I'd love to hear it

[@cesarsalgan5235]

Hi Drew. Thanks for the videos. Could you help me with an example of how to switch scenes via MIDI from a DAW (I use Logic Pro on a Mac) In the Remote tab of the Setup it says which CC to use, but I haven't been able to get it to work. It's a feature I always used with the X32, but since I switched to Wing years ago I haven't been able to do it anymore. It's not listed in the WING MIDI Remote pdf. What parameters should I type in Logic Pro?. Regards

[@GATLINMERCH]

Good Morning. I’ve just ordered my compact wing. Before it ships to me I would like to get a start on which Recording SD Cards to buy to have it fully functioning all channels and etc.

[@teamx-it]

Hey Drew I need some help, I have a behringer x32 compact and im using it for a recording studio. Ive bought some brand new set of headphones for in ear monitoring however when I plugged them straight into the aux out number 1 I can only hear out of 1 ear and this is happening on every single one of them was wondering if you had a solution for this thanks again Drew love your videos keep up the great content

[@radioflyer2030]

AUX outs, regardless of the console in use, are NOT designed to drive headphones. Period. They are a line level output intended to drive power amps and other line level devices like powered speakers and wireless in-ears boxes. If you want a simple & cheap option, get a Behringer P2 wired active in ears box (around $45 bucks), or any of the many decent copies of the P2. Set it to mono mode (physical switch inside the unit below the battery compartment). Connect the P2 to the AUX with an XLR cable, plug your headphones into the 3.5mm jack on the P2, turn it on, and use Sends on Faders to make your mix on the bus of choice linked to the AUX XLR out in question. Also, check the routing if you are using the 1/4" AUXs, since they sometimes come configured as inserts & returns from the factory by default. This is the actual, correct method of setting up an AUX to use with headphones / in-ears monitors. Those 1/4" AUX outs on an X32 are actually BALANCED 1/4" connectors, aka TRS. It looks like a stereo connector, but it's actually something completely different. If you want stereo, then on the X32, you need to stereo link 2 busses, and you would be better served with a Behringer P1 active in-ears box, which has 2x XLR inputs for stereo use. You can buy or build a cable to get the cheaper P2 to work, but it's more complicated. Basically for the P2, you need dual XLR female to 1/4" stereo (as opposed to balanced), and you need to be sure that the internal wiring is pin 2 of each XLR to the tip and ring respectively of the 1/4" plug. Just because has the correct connectors doesn't mean it will be wired as needed for stereo use. The 1/4" stereo plug goes into the XLR combo jack on the P2, and the little switch under the batteries must be set to Stereo. Hope that helps...

[@luisramonpachecoclaudon9963]

Hola ! Soy de México y me gustaría que hicieras un tutorial de como personalizar los 16 últimos canales del lado izquierdo de la mixer behringer X32 la capa número 4 ( Bus Masters ) para configurar 4 canales en pre faders para monitores, 8 en subgrupos y los últimos 4 en post faders para los efectos. Gracias por tus excelentes tutoriales y enseñanzas.

[@Takeiteasy11]

Hey drew, lost one of the fader caps on my behringer wing. Know where I can find a replacement? Thanks.

[@abinashrao5145]

Please make a video on dlive s7000

[@BrianDavis-n3o]

Thank you so much for this amazing video! A bit off-topic, but I wanted to ask: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). What's the best way to send them to Binance?

[@leonelceniceros1550]

Hey Drew, would love a video on assigning a custom control button to lower the volume on a fx bus to a predetermined level. Needed for when a singer speaks between songs and the verb is too obvious. Also, a video on a “panic button” to bail on outboard processing. Turning on onboard bypassed processing. Thanks!