The gan 11 m pro looks awesome with black internals
@RealNaoh3 жыл бұрын
Agreed.
@jacksoncuber86263 жыл бұрын
Yes
@bubbaboi23323 жыл бұрын
@Rafael Mendez nice
@Toletanus3 жыл бұрын
Mine is black internal too.
@christhecreative2106 ай бұрын
Mine is black internal to
@muktamondal72543 жыл бұрын
One cube, four versions, insane customizability, great performance .... what could you ask for better than that.
@gauthamgopinath33623 жыл бұрын
Great price.....
@muktamondal72543 жыл бұрын
Should've added except for that
@pll__skip3 жыл бұрын
Now 5 version, coz they added the sticker
@etfoltz2 жыл бұрын
less catching lol
@Ultra23Ahan Жыл бұрын
gan 13
@elisabethherzog93693 жыл бұрын
This was my first Gan so I was a little frightened to do anything to the tensioning and such but I totally understand now, thank you! I also apparently overlooked the fact that I could change the corner magnets so that was good to know.
@Suni_C0W Жыл бұрын
hhhm funny this is also my first gan
@query2511 ай бұрын
Same too!
@apollo11capcom394 ай бұрын
The 3 position switches on the corner pieces adjust how far out, or close, the triangle or hexagon internal magnets sit in relation to the core magnets. So essentially you have 6 settings for your turning magnet strength, how hard and sharp it snaps into position when completing a turn.
@javierthenoob44563 жыл бұрын
I can’t even pop out the Center without me thinking that my Gan 11 M pro is gonna break
@aanaishapoddar3 жыл бұрын
Exactly I just opened mine today!
@thorbenmaas78483 жыл бұрын
Same
@underio3 жыл бұрын
@@thorbenmaas7848 same
@Evotionn3 жыл бұрын
I went to order it but when i used the discount code and payed i remembered i am broke
@sochaky57623 жыл бұрын
Me too
@TesserId3 жыл бұрын
I tried the full range of limit and tension settings from the tightest to the loosest. It's still super stable at the loosest setting and not very squishy at all, though there will be an occasional floppy snap, which I decided I didn't need. The other end of the spectrum is also excellent. Despite the graph in the documentation, corner cutting doesn't get significantly reduced until a limit setting of one (at least for my tastes). Again it's super stable at the loosest setting, but it made perfect sense to go with the tightest limit setting that was comfortable on the corner cutting; and for me that was 2, though 3 is great too. From there, I adjusted tension to taste (second click/step three [however you prefer to count]). What a great cube.
@Fatigue-Lost_AirBassist3 жыл бұрын
Just what I wanted, the smallest commercially available flathead screwdriver! Thanks for the guide, SCS. I won this cube as my first GAN Cube besides the 354 v1 with no nuts (I wont the 11m Pro from a Cubicle giveaway XD)! But this is amazing, thank you and best wishes!)
@kevinlin46623 жыл бұрын
My v1 was so bad the nut unscrewed itself
@tommycotter82602 жыл бұрын
I’ve had this cube for over a year now and only just learned how to properly customise it so thanks a lot!
@pcniv3 жыл бұрын
3:58 isn't it 2 and 4 on the dark blue
@AlejandroVillate8323 жыл бұрын
Yes
@ausy13563 жыл бұрын
Ahahahah
@porglomber3 жыл бұрын
Nice! My GAN 11 M Pro (From SpeedCubeShop of course) will arive tomorrow, Can't wait to start customizing it!
@daveendaya00773 жыл бұрын
SCS said that my uv coated version will be delayed
@mihirmalladi84943 жыл бұрын
My GAN 11 M Pro is coming for Christmas and i never owned a GAN cube before. Thanks for the video. It isn't that overwhelming anymore. Keep in mind, i said "that overwhelming anymore".
@tyleranderson62133 жыл бұрын
I was messing with it and turned the tension nut clockwise and it popped and a piece came out put it back in just fine but did I mess anything up?
@nevergonnagiveyouup42703 жыл бұрын
Where did the UV coated gan 11 m pro gone? I was planning to save up and buy it. Pls put it back.
@blooberry483 жыл бұрын
gan stopped selling the us coated
@blooberry483 жыл бұрын
uv*
@NYCUBING3 жыл бұрын
I ordered mine yesterday this information goona be really helpful thanks!
@Sheikhm0073 жыл бұрын
Really INFORMATIVE VIDEO; it was very helpful. I look forward to adjusting my coming GAN 11M PRO using the acquired knowledge from this video. Ans, I have on question. Is the DARK BLUE nut for a tighter tension or looser?
@porglomber3 жыл бұрын
The dark blue nut has settings number 2 and 4, so basically yes, it is.
@sarikasawhney22783 жыл бұрын
The Floral blue has 2 settings. 1 and 3 Setting 1- Tightest very stable Setting 3-Loose. Kinda unstable Dark blue also has 2 settings 2 and 4 2-Looser than 1 but tighter than 3 and 4 4- Loosest setting. Very unstable,could pop and will corner twit easily.
@Sheikhm0073 жыл бұрын
@@sarikasawhney2278 Thank you so much for informing.
@Sheikhm0073 жыл бұрын
@@porglomber Thank you so much for informing.
@dunkmanten22572 жыл бұрын
@@Sheikhm007 thx
@naurthanks61223 жыл бұрын
Thank you for this video this is my first customizable cube and this video made it less depressing
@ryanxu99833 жыл бұрын
Eeeeee idk y im saying this here but my valk 2 m and my timer is comin today so im suuuper excitedd
@christhomas60633 жыл бұрын
did you get them yet?
@ryanxu99833 жыл бұрын
@@christhomas6063 lol yee
@crctornado71753 жыл бұрын
My cube has 2 customization. Lubed and unlubed :b
@StaticNebula263 жыл бұрын
If it has screws, it's practically infinite
@lennygeee3 жыл бұрын
@@StaticNebula26 obviously you don’t know, what infinity is
@StaticNebula263 жыл бұрын
@@lennygeee the planck length limits it to countable, so its practically infinite
@cuberchez8183 жыл бұрын
yes
@crctornado71753 жыл бұрын
@@StaticNebula26 yes i noticed it
@aglcubing96803 жыл бұрын
Nice! I needed this
@CANVASARTS1233 жыл бұрын
This is why tingman ranked your thumbnails as the best
@cuberchez8183 жыл бұрын
Alternate title : Making an unaffordable cube even more unaffordable Oh yeah, and don't forget that extra 32 dollar shipping
@RealNaoh3 жыл бұрын
Shipping is free for me. 🤷🏻
@sarikasawhney22783 жыл бұрын
Idk why but my reply got deleted I said that SCS has 15$ shipping for Asia as well. And if u spend a certain amount u can get free expedited shipping. The current rate for free expedited shipping is to spend 14.5k inr.
@sarikasawhney22783 жыл бұрын
@Rayyan Humayun ya. In india the shipping cost is approx $14.98 for the standard shipping.
@soullessloner40623 жыл бұрын
@@sarikasawhney2278 You can Buy your Cubes in Cubelelo which is an Indian Based Cube Store And you can also use MACubing Discount Coupon
@cuberchez8183 жыл бұрын
@@sarikasawhney2278 yeah like everyone has 14.5 thousand rupees right in their pockets. My 6 month school fee itself is around 12k🙄😏 I can buy a brand new cycle with 14k I think you are quite rich Aap log kabhi middle class cuber ka dard nahi samjhoge Kisi ek jamane mein hame bhangar brand cube se cubing karni padti thi! And for your 15 dollar question, we have to face 15000 questions for so much money. some common lines from our mahan parampujya matashri and pitaji: Website safe hain kya? Scam to nahi? Apan paas wale dukan mein bhi milte hain.Kyu paise waste kar raha hai? Beta, padhai kar. Ye bohot mehenga hai.(Even though I get about 100% in every exam!) Kitne cubes hai re tere paas, aur kya chahiye! (Only 6 cubes hain!) Ye itna mehenga liquid kyu le raha hain? (lube) paani use kar na! In middle class families, and even 15rupees is " *too much* " for a child (Child aging from 0-16 years!) to give! He/she might lose it, or worse, overspend it! Sirf sabji/samaan lane ke liye paise milenge! Mujhe hi pata hain, mein cubes kaise liye hain! Jaane do, Gan user kya jane YLM wale ka dard!!
@olleh13 жыл бұрын
you make popping out the center cap look easy
@user-ms6sd6wh1p2 жыл бұрын
Thank you Cameron! This tutorial helped me a lot!
@ultrachad54922 жыл бұрын
I love the vid for the corner magnet strength thx
@apollo11capcom394 ай бұрын
I don't understand how the center blue nut is supposed to adjust corner cutting as the only thing it seems to do is adjust the anchor point of the clear spring loaded nut. So it's just added or removing preload from the clear nut. In other words- adjusting which blue center nut you use, which setting its on, or which setting the clear spring loaded nut is on, are all doing the same thing- adjusting the tightness of the center piece.
@gabryy7683 жыл бұрын
What do you think is the best lube/ lube combo for this cube?
@speedcubesolver11953 жыл бұрын
SCS intro is so nice...
@louisbar1113 жыл бұрын
Great video Cameron keep up the great work!
@scott_sauce3 жыл бұрын
Awesome... so helpful from a newbie. Appreciated
@Dabi155742 ай бұрын
Newbie? He better than u
@fabianreis39462 жыл бұрын
what loosens it on the blue thing, is 1 loose or 4 loose?
@jacksoncuber86263 жыл бұрын
I’m thinking about buying the GAN 11 M Pro. Should I get black or primary internals? 🤔 what are your thoughts?
@sarikasawhney22783 жыл бұрын
Primary
@jacksoncuber86263 жыл бұрын
@@sarikasawhney2278 thank you for your opinion
@sarikasawhney22783 жыл бұрын
@@jacksoncuber8626 do u want the reason for why I think that?
@jacksoncuber86263 жыл бұрын
@@sarikasawhney2278 yes
@sarikasawhney22783 жыл бұрын
@@jacksoncuber8626 ok. The black internals might look better but the primary internals are better for speed solving. It reacts better to lube, gives a smoother feel and overall leads to less lockup’s and fluid solves. That’s why I think that. Saying because I have an 11m black,primary and an xs. Hope I help.
@ivanbashmachnikov60073 жыл бұрын
thank you! i can now fully customize it!
@UAF163 жыл бұрын
I ordered mine 1 week ago, now I wont need to watch this with a meaning
@colelacey28752 жыл бұрын
Thanks! Learn cube off the net, you r a great help
@daksh30823 жыл бұрын
thanks cameron
@brcb23 жыл бұрын
thanks now i can easily customize this cube keep it up
@bensilashi82623 жыл бұрын
The corner mechanism: Does it control the center-corner magnets or the corner-edge magnets? Saw some reviewers saying the one and some the other and I'm confused 🥴
@jaydonturner23673 жыл бұрын
It moves rhe the corner core magents it moves the magents in the corners it will change the distance from the corner from the core magnets hope this helped
@sub-14143 жыл бұрын
Watch Shawn from Speed Cube Review. In His Gan 11 video you can see the corner stock magnet move in and out of the corner piece when he moved the corner adjustment. Time Stamp: (4 : 10)
@TesserId3 жыл бұрын
0:14 "168 customization possibilities". Apologies, but I'm cursed with a computer science degree--and therefor obsessed with the correct counting of things. Correct me if I get any of this wrong, because I'm not perfect and get hung up on things that aren't relevant. But assuming that you want a symmetrical setup, there are 3 corner magnet settings, 3 core-magnet settings (including removing the magnets that interacts with the core), 4 center-travel (center-spring) limit settings (combined across the two different nuts), and 7 spring tension settings. Funny that the product documentation says there's only 6 spring tension settings. I had to pop a cover to count it correctly myself. What you do is go around until it pops. That's one, not zero. It's a classic off-by-one error. We computer science people are so silly. Anyway, allowing for 3 core magnet settings: 3 * 3 * 4 * 7 = 252.
@ASDCUBER3 жыл бұрын
Very very good cube
@Joseph-j3s4yАй бұрын
Thank you!!!
@SpeedCubeShopOfficialАй бұрын
You're welcome!
@uritaanach13773 жыл бұрын
i got one! this is AMASING
@JustARandom_Duck4 ай бұрын
For the light blue nuts, if the number is high does it mean its tighter?
@josiah72022 жыл бұрын
4:08 How? 😯💨 By using the hextangle magnets?
@ChaimMosheZaltsman3 жыл бұрын
U R’ the best man
@adnanls3 жыл бұрын
Thank you so much Cameron! I managed to fix my gan because it almost broke.
@6cosmic7223 жыл бұрын
I didn’t realise that I ordered mine a stickered cube until I got it. Is there any chance I could return it in exchange for a stickerless cube?
@sub-14143 жыл бұрын
The magnet adjustment doesn't change the corner magnets under the plastic it only moves the corner stock magnets closer and Farther from the core magnets.
@cohendraper85243 жыл бұрын
Hey Cameron, i was just wondering what lubes do you put in the 11 M Pro when you pay for the pro setup option? I bought one with that option and was just wanting to know what lubes to buy for it when i need it
@Vansh_716112 жыл бұрын
Worked very amazing
@RofICopters3 жыл бұрын
hex core magnets + setting 1 on corner magnets = ideal roux set up
@willymangorsi44573 жыл бұрын
1% people using their imagination having a GAN 11 m pro😅
@SanjayJohnKing3 жыл бұрын
I gonna buy one it my 2nd 3x3
@mohammedbilal3492 Жыл бұрын
My 11 m pro popped into plastic pieces on my first day you saved my life
@tommybaker67793 жыл бұрын
I like changing the mangnets and putting the hex magnets but I used tweezers instead of my fingers
@fwyoboilevi2 жыл бұрын
Cameron please help I was doing the distancing but part and the hexagon thing and the plastic just popped out
@marshalsobrero3 жыл бұрын
Do you goes only have the frosted ones in stock/ when should we expect the soft variation to be shipped?
@Zyrilix3 жыл бұрын
never now
@marshalsobrero3 жыл бұрын
@@Zyrilix lol I was able to get the soft variation and the uv one.
@kidfineful3 жыл бұрын
Great video...but what abou the nemebers on the corner's magnets please?
@monkiplayz38343 жыл бұрын
Thanks it was very helpful!
@christhecreative2106 ай бұрын
First, when I did it, it almost broke but I managed to fix it back
@MagicalTeoSub2 жыл бұрын
Can you Lube it without breaking the adjustments that can change the corner magnet strength?
@neptune3643 жыл бұрын
Geary video, really helpful :) Just a question though, are you sure that the triangular magnets are weaker? I tried them in my 11 M Pro and they seem stronger to be honest.
@timspencer5203 жыл бұрын
Same actually
@purplespacesnail68362 жыл бұрын
@@timspencer520 they arent the same
@AtelierMoulineaux8 ай бұрын
@@purplespacesnail6836 he meant he thought the same, he didn't say they were the same.
@BrandonWong553 жыл бұрын
The GAN 11 M Pro has 144 customization settings, not 168. The GES nuts have 6 positions, turning the nut a 7th time resets it back to the original position.
@kiraPh1234k10 ай бұрын
It does have 6 positions, but that means turning is a 6th time resets to original state, not 7th. 7th would be original state + 1
@stickmantony82433 жыл бұрын
The Gan 11 Pro with black internals looks the same as the stickerless Gan xs actually
@kenethchavez63343 жыл бұрын
Wish I had that cube.😔
@kakaboi43732 жыл бұрын
Uh i need help i turned the tensioning system thing clockwise and now my entire white layer came off and im panicking
@geocine3 жыл бұрын
I am having a hard time removing the triangle magnets, any tips how to remove it. On the video , it looks so easy.
@samgayed18373 жыл бұрын
Thank you so much.
@justarandomguy6816 Жыл бұрын
When you're removing the numerical distancing nut, is it possible for the tension to get messed up? I turned mine from the default to 4 and it keeps popping. Please help
@Autoclick482 жыл бұрын
my precious gan 11 m pro almost was like technoblade. the tensions got changed and it popped luckily im a god so i fixed it.
@rayalakeertan77073 жыл бұрын
Hi speed cube shop and cameron
@KendrickGaspan3 жыл бұрын
I'm getting this cube
@GorggW3 жыл бұрын
How do you deal with carpal tunnel?
@kidfineful3 жыл бұрын
I have an issue during the solve the corner's magnets changes from 1 to 2 or 2 to 3
@colelacey2875 Жыл бұрын
On my 11 pro wich nuts will make it tighter. I'm on dark blue and it's to loose. I am a hard snappy turner. If the dark blues are the tightest I guess I will Dig and gav the lube it
@anonymouscuber10552 жыл бұрын
Hey SCS can you please tell me what are the default settings for the gan 11 m pro
@thedude67403 жыл бұрын
Fun fact : only 5 % of the people who watched this video will actually use it.
@lennygeee3 жыл бұрын
Im under the lucky 5%
@kiwicuber3 жыл бұрын
Less than 5%
@ryanxu99833 жыл бұрын
Im already rlly happy with my gan x v2 so consider me in the 95%
@marios8813 жыл бұрын
Wow i’m in the 5%
@thedude67403 жыл бұрын
@@marios881 well congratulation
@yogasuprayitna9 ай бұрын
bro, in gan 11 m pro which stronger magnet triangel or hexagonal?
@ThirdyBxx7 ай бұрын
Hexagonal
@cubarl41303 жыл бұрын
Next video:buying a gan 11 m pro like a pro
@sarikasawhney22783 жыл бұрын
Would anyone exchange a 30-40$ cube for the gan 11m pro black internal/uv coated. I don’t like the 11m pro that much.
@krish_yt36073 жыл бұрын
I ordered a cube from your website and I live in Sa. How long will it take to get here.
@CrasyFingers3 жыл бұрын
what about the extra set of magnets? not the triangle or hexagon ones, but some really tiny magnets that came in a plastic bag? do you replace them with the core ones or put them on top of the core ones?
@CrasyFingers3 жыл бұрын
well here goes nothing, i'm putting them on top of the original core magnets in hope for stronger overall magnets
@CrasyFingers3 жыл бұрын
well it didn't work, the extra magnets are obstructking the whole thing and it moves terrible
@method25843 жыл бұрын
Hey Speed Cube Shop, I have been trying to find a good setup for the Gan 356 air m, and I was wondering what SCS Lube you would recommend for that particular cube, if you have a suggestion please let know , that would definitely help me a lot 👍🏻👍🏻
@noobiequendog62303 жыл бұрын
it already a PRO
@JustARandom_Duck4 ай бұрын
Difference between light blue nut and dark??
@SpeedCubeShopOfficial4 ай бұрын
Different levels of elasticity
@olivia84403 жыл бұрын
Nice video!
@masonjason88193 жыл бұрын
Even on the tightest tension setting my cube is still super loose. Anyone know what might be happening?
@Usha_Prasanna3 жыл бұрын
try out tightening elasticity dude
@masonjason88193 жыл бұрын
@@Usha_Prasanna I got it figured out. Just had to break it in more
@cameroncook79433 жыл бұрын
Is it just me or do some of these videos look more realistic than real life
@realTPerm3 жыл бұрын
same
@TheRealBigMacPants2002 жыл бұрын
when I try, I can't get the center cap off :( and it a little too tight to :/
@quakogaming45263 жыл бұрын
AY CAMERAN MA FRWEND YAAAAAAAAA POG
@rishikesh52053 жыл бұрын
Mee too I also want gan 11m pro
@royitaqi Жыл бұрын
I have a question. I have it on distancing setting 4 (most distance allowed, I assume), and it still cannot corner cut 45 degrees. Is there a way I can verify why this happens?
@ThirdyBxx7 ай бұрын
Because the higher the number the tighter which makes it more pop resistant but less cornercutting
@IcyGlider2 жыл бұрын
Can someone pls tell me how to tighten cube cuz every time I play with it it just pops
@felixtritschler50963 жыл бұрын
1:04 Doesn't each corner piece have 3 adjustments (because it has 3 "inward"-surfaces), thus totalling 24?
@wjatek9973 жыл бұрын
No
@michellewang22582 жыл бұрын
thats not how it works
@lithum24843 жыл бұрын
i just got an XS like a week or 2 ago ;-;
@Butterflopper2 жыл бұрын
This should’ve came with a little ranch two lol
@louisbar1113 жыл бұрын
Who ordered the uv coated version from shopgancube.com and still didn’t get there’s