Customizing My KAYAK -- The Ultimate Fishing Kayak Project

[@JonBrollin]

Quick question..should I order the 15hp or the 20hp Mercury outboard for the new yak? Don't want to go overboard here but would like to add a little extra power, ya feel?

[@bcfishing6446]

mabe like a 500-600hp Yamaha...

[@brendank.8202]

Stick with a 15...

[@coryl412]

This is a quality comment! Love that you can laugh at all the hate. Lol

[@jeremypierce1607]

I'd go with a 3.5 mercruiser inboard/outboard with hydraulic controls.

[@jimmyceltic4120]

Jon B. Get another milk crate from local Cumberland farms and cut bottom off and use it for the lid on your other crate . That way if you flip it will hold your stuff in if you tip over has saved me many times

[@juliaallen7149]

My first time Kayaking and this Kayak held strong. kzbin.infoUgkx4k5UrhC3v_Y4hIEaXLGvHcN5a5aBmZNB The water got pretty rough as a speed boat zipped by me, and the Kayak withstood it (I expected to be capsized). The Ores are very easy to put together, the pump worked beautifully. the seats are a bit hard to sit in after a while (I recommend sitting on the floor). after reading the reviews I was very scared it'd get a hole in it, the material is very strong and durable. The Air valve may need a small Phillips head screwdriver to adjust, other than that, it's well worth the money!(update)I've gone Kayaking in 3 Lakes and 2 rivers totaling about 40 miles. the kayak had two holes and they patched easily and no other problems can't wait for kayaking season this year!

[@Big35gonnaup]

Wow day three with straight videos I'm in heaven

[@burtlecuber6875]

fish nation same tbh

[@rickymcmahan8226]

Same

[@wantitall521]

Got my first watercraft last year. I bought a cheap kayak from Walmart but I love it. It's so much better than fishing from shore all the time. Keep kayaking!

[@FunkyNug420]

Don't put the LED strips on top It'll end up blinding you and making it hard to see. Instead put them on the top edge facing out. It's safer and more practical

[@JonBrollin]

Exhaust King ah, good call

[@RoyalVison]

What about velcro strips for the LED lights?

[@FunkyNug420]

Also stop at the hardware store and get a 5 or 10 amp inline fuse and some shrink wrap. The inline fuse is for in case the connections get wet it doesn't melt the wiring and the shrink-wrap is key for keeping the connections dry 👌

[@nathansauers1990]

+Jon B. Don't put duck tape on the batterie if the wire breaks the tape will burn and can start the batterie on fire

[@thaplugexclusive876]

And maybe put them in the water for like a bait attractor

[@vwrFEW]

"Who can afford a 20k bass boat?" Uhhhh didnt you just sell your porsche? lmao

[@TheDreamCatchers]

I dont understand. Jon B has been getting so many dislikes on his videos lately. His last vid has 2k dislikes. What is going on. Jon B is the perfect youtuber

[@WisconsinFishingandOutdoors]

The Dream Catcher bot dislikes. Not real

[@allee1414]

The Dream Catcher so true

[@tannermartin4989]

All the googans are being dislike botted

[@will3508]

I would almost venture out and say it might have something to do with Catch em all...he commented something on one of Rob's recent vids but I don't remember exactly what without looking back. All I know is that guy seems like a douche

[@bensenvanwimgerden2914]

scott martin is getting them too

[@garrett7706]

Pls don't stop making vids I have no idea why people are disliking your videos you are my favourite KZbinr

[@kurtisanderson7518]

You should get a tiny kayak trolling motor 😂😂 nice vid Jon!

[@SethBricel]

I looked into a lot of different transducer mounting options and what I discovered is that as long as there is water (or another medium without air bubbles) between the transducer and the hull, you can just put the transducer inside the hull and leave it there. Some folks build a small water reservoir out of duct sealant. The side-mount arm may allow you to mount it without any drilling, but I think if you want the cleanest look and easy transportation, mounting it inside the hull (and leaving it there) is the way to go. Great video as always! Very excited to see where you go with the kayak.

[@AidenMangipano]

Keep Fishing, Never Stop

[@byondvision]

Keep Stopping. Never Fish.

[@giannietopio1226]

MoMo Baklava I've got things to see and people to do

[@keylay9453]

Never keep, fishing stop

[@averyalexmcawesome6629]

the foam is for you to stand up and have grip

[@bcfishing6446]

Fishing Keep, Stop Never

[@bradenmungeam4313]

I pulled the milk crate move this summer; not bad at all! If you end up needing to drill into the kayak just hit the seams with some silicon glue and you’ll be golden👌🏼 Keep it up man you’ve come a long way in the 4.5 Years I’ve been watching!

[@BassandCoffee]

Why so much dislikes? Wtfuark! EDIT: Hey jon! Bring your yak down to East Tn! My bro, cousin, and I fish on yaks all the time. I have vids up of us. Let us know if you are ever passing by down here! We love to collab with the best! 2v2 Our Ascends vs their Feelfree kayaks!!!

[@seanwitzeling8640]

Yeh what is this?!!

[@trackerfiend]

deadhorsez How do you know that? If that's true, that's F'd up.

[@brianbaker5757]

he said he was ok with jon b ab is the problem

[@trentonmeadows3290]

BassAndCoffee I'm in east tn as well on Douglas

[@carlgwizdala1507]

Hello Jon B. I have had the pleasure of reviewing your new purchase of the Asend kayak. I to am farely new to this concept. I have found your video VERY INFORMATIVE in assisting me in my future purchase of a kayak. Thank you Mr. Jon B. in being Very Helpful in my future purchase of a new kayak. Sincerely, Mr. Carl Joseph Gwizdala.

[@tuckerbarnes1864]

You can always mount the transducer the inside of the hull, no drilling required, there's tons of videos about how to glue or epoxy your transducer to the inside of the hull, one thing a lot of people don't know is that the transducer does not have to be in contact with the water. Depending on the brand, you might sacrifice a little bit of resolution and picture quality but if you don't want to drill holes and avoid cheap plastic extension arms it's the way to go. I do know for a fact that Lowrance and Simrad work well with this technique. Hope this helps

[@ChaseStayancho]

Who else likes the video before watching just out of habit??

[@kenanwalsh6030]

Some tips from a fellow kayak fisherman; ADD OUT RIGGERS, out riggers can stabilize your kayak while they might make it a little harder to paddle when you are flipping docks for bass you can stand up and make a easy money cast, the kayak will also roll a lot less! And when you are putting that 12v battery where ever, Go to your local store and go around putting your battery in boxes and try to find the best fit, this will make your batter waterproof and it is pretty cheap to do! If you really want to go over board with your kayak mount a 20lb trolling motor. Now with a 10ft kayak and limited space this is isn't really needed but makes getting to your spots easier and faster! Look up videos on how other anglers made there yaks and brain storm! good luck

[@KushByTheBush]

Don’t forget an anchor Jon B! Also a little anchor trolley system.... u won’t regret it!

[@wd8661]

Was so glad my Old Town came with the trolley system. +1, get one for sure.

[@sakimano]

Suggestions from a kayak fisherman 1. mount all your stuff (fishfinder, rodholder etc) on teh one side of the kayak. Left I would say so your right arm can land fish etc). This way you can more easily land fish but you also, if/when you flip the kayak , will have a clear side that is easier to get back in from. 2. Get your battery into either a dry box or a dry bag 3. Get a leash for your paddle. 4. Get a few more leashes for stuff like Pliers, lip grippers, scissors and rods that are not in use 5. Put a rod holder on (scotty likely) so when you are trolling you can set it there, or when you land a fish you can just quickly put the rod in it and not worry about it falling out etc. 6. Get an anchor setup to hold your spot (or a micro power pole with some of that panamera money) 7. Keep an empty gatorade widemouth bottle on board :)

[@kodyzeigler2605]

Thank you for uploading I was so bored I was watching 1rod!!

[@weezerfan999]

Kody Z. Dude, at that point I would’ve rather watched paint dry.

[@kodyzeigler2605]

BancroftOutdoors 😂😂😂😂

[@bluegrassbodybuildingfitne406]

Kayak fishing is the way to go. It’s a challenge at times but frankly way more fun and rewarding in my opinion.

[@Outdoorsweekly]

Can I please come fishing with you

[@byondvision]

No.

[@brendendamen5390]

outdoors weekly no.

[@lolyballer2971]

outdoors weekly you know he will never see this

[@fiveforfishing2366]

outdoors weekly Fellas, this is outdoors weekly. He's growing and loves to fish. All you haters just need to stop. A kid can dream. Let him.

[@chriswaltmann5841]

I just got into kayak fishing too, and Pinterest is a wealth of information. I also joined a Facebook group for customizing yaks. There's so many options.

[@CrankinCaleb]

Thass My Boi

[@Jredding352]

Crankin' Caleb yo Klae from fishing northern Florida said he wants to join the squad!!

[@Finatic]

Crankin' Caleb lol

[@Jredding352]

Bass Finatic BRENTON!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@eminiardfishing8918]

If I'm not mistaken they make battery packs for the yaks. Also you definitely need to get some leashes. Leashes for your rods and then definitely get a leash for your paddle . I normally keep my paddle across my lap all the time and when I go to set the hook if It slides off, the leash keeps it nearby. Also some friendly advice, when the water warms back up take all your gear out of your kayak. Go to the water, and attempt to flip your kayak. By doing so you will have an idea of how much you can lean before you actually flip. So when you're in a real life fishing situation trying to get that 12 pounder out of the brush, you'll know the limits. Excited to see these videos come!.

[@samramz1109]

How Jon hasn’t broke anything in his unboxing segs/ vids is beyond me 😂

[@nickreelzfishing2165]

I was hesitant to drill into my kayak at first but then when I came up with a game plan it turned out that drilling and mounting all my accessories was the easiest and safest option. You can mount the transducer inside the hallow hull of the kayak and glue it down and it works just like if it were in the water. I also store the battery inside a waterproof case inside the hallow hull. I then just run the cables up and out of a small hole I drilled near the fishfinder and plug it in the fishfinder when I'm using it. This way you don't have some many exposed cables on the deck of the boat

[@chrisanastasi2908]

Yo Jon do another nationwide challenge but in Orlando with all the ponds and canals.

[@lukascarlson5459]

Hey Jon, I have been kayak fishing for a long time now and one of the most important things is an anchor especially on windy days. I have a 12ft kayak and use a 10lb anchor and a anchor trolley. Awesome to see you starting to kayak fishing!!!

[@justinm.3594]

+Jon B. As a kayak angler I am familiar with the milk crate idea. The thing about the milk crate is you should really put PVC rod holders on it (homemade) you can literally fit like 12 rods on the crate. Also an anchor trolley is very easy to figure out. The battery to your fish finder can go in your milk crate. Also if you are into this kind of thing, you can mount a trolling motor on the back of your yak! It makes for a better day on the water. Silicone the hole on the transducer! Basically simple stuff, another nice video!

[@dangerrrnick5005]

Justin M. If I could only have one thing for my FS12t it would be the anchor trolley/anchor combo. Invaluable.

[@brandonwilson4694]

Justin M. Those were some great ideas, I recently put up a video on my yak. You might check it out and see if you could give me some more ideas on it!

[@samg6238]

Yo Jon I don't know if you'll see this but I have a kayak that i've decked out over the years and have a few suggestions. For 1, definitely install an umbrella mount, being out on the water usually means direct sunlight for hours on end. The shade is so nice and it can help with light rains as well. Also keep a small length of rope, it'll always come in handy. Maybe invest in an anchor too, I just have a heavy crowbar and it's easily one of the most used items in the kayak. Also the small storage space in front of your cupholder isn't as waterproof as it seems, just a heads up. Good luck, bud.

[@fiveforfishing2366]

Well, you've caught your PB twice on a kayak and once from the bank at Yamamoto's. Who the hell needs a boat? 👀

[@JonBrollin]

+Ryan R. Ikr! The kayak scene has been good to me so far

[@fiveforfishing2366]

Jon B. You get a boat when you can no longer get around in a kayak which is many many years from now. Ur kayak vids are the best. Thx for finally getting a paddle holder. 😀

[@edwardenglish1519]

You got it going on pretty good JB. Add a small solar panel to keep your battery and accessories charged. There are a lot of small 12 and 6 volt ones that are used on deer feeders that would work very well.

[@jango565]

lmao griping about how expensive a bass boat is in the video after trading in your porsche.

[@icefishingoutdoors]

hoss56 right lol

[@coltspinks9397]

Hey, so for the transducer connection with the mount you have the only way to connect it is by drilling into it. If you decide to go that route, you will definitely want to use silicone to help keep water out of the kayak, and using a rivet gun will help exponentially! If you have anymore questions pertaining to kayak fishing I’d be more than happy to help.

[@FishingWithYakPak]

Just keep yakkin, Just keep yakkin :)

[@Pupsquatch]

For drilling holes into the yak, just take the leap, it pays off. I installed an anchor trolley into my kayak and it helps so much for positioning.

[@maxchronister7713]

WHY DOES THIS HAVE SO MAY DISLIKES!?

[@fiveforfishing2366]

Max Chronister Not sure. This is troubling cuz a lot of people out there want to see kayak mods. Especially from Jon. Some of the most interesting vids on yt get disliked a lot.

[@haydenhigginbotham6551]

I think somebody might be botting dislikes, there's bot dislikes on Rob's channel too

[@fiveforfishing2366]

Hayden Higginbotham I noticed this too but I guess the silver lining is that even dislikes contribute to viewer exposure. Some weird stuff going on with KZbin.

[@maxchronister7713]

All of the googans are getting botted

[@yeetedfetusstudios4872]

Yeah looking at it there's a lot of videos that shouldn't get dislikes (Like Peter browns) most recent video I agree with you all.

[@josephmendoza9142]

Kayak rigging is always fun! That paddle holder comes in clutch all the time

[@Arcasting1]

That’s a Nice Kayak for the price!

[@alexniehaus1336]

Please more kayak videos. I am considering getting one myself and it helps to watch someone go through the process of buying one with all the additions. Maybe in the future talk more about how much you paid for each piece.

[@oldacc1335]

I am pretty sure that someone is botting dislikes because there is no reason this video should have this many dislikes and also on zaks channel he made a new fishing video that has 1000 plus dislikes, same with lunkers and ap....

[@bigdraycountry764]

Fishing Northern Florida Seems like YT is out to destroy the ones that get out the house and away from a TV or computer screen. Idk but I wish they would stop. 😒

[@brewerx2290]

QUIT CHANNEL iii

[@creeperdevil8]

The ram mount system has a suction cup, not sure if the kayak has smooth enough finish but they work great in my fiber glass boat for tools mounting and no holes. I can adjust where its located anytime depending if I fish bow or stern. Might be a good solution for transducer or for fish finder so that you can position it where you want and take it off for flipping upside down when you strap to the highlander. Keep fishing...Never Stop!

[@AlfaHalk]

Lol 2019 still no kayak video 😂😂

[@AlfaHalk]

@Jack Layher he has moved on to bigger better yaks 😔

[@sambam97]

@Jack Layher 2021 now

[@swarmz826]

@@sambam97 2022 now

[@ZishaTV]

@@swarmz826@sambam97 2024

[@isaacvanness2539]

Don't listen to the haters, we LOVE you Jon!!

[@JaggedToothTackle]

I mounted a paddle holder on my kayak -- then you always have to put it in and take it out. I simply use a tether and I can throw my paddle at will or as needed --- cost about 3 bucks

[@b.s.fishing5902]

if you don't want problems in the wind you will need either an anchoring system...or if you are getting blown around while paddling, you'll need a rudder. The deeper the go into the water the better, it will give you better control and tracking. The difficult part is adjusting it while you are on the move and paddling. Its so much easier in my pedal drive because I can always have one hand on steering the rudder. curious how you mount and power the LEDs, i'm looking at doing that for my kayak so that I can go out night fishing for walleye in the spring.

[@tannermartin4989]

Kayak build series mondays?

[@ZackofAllTradesct]

For the LED lights...1: Learn how to solder, don't use the quick clips. 2: Use liquid electrical tape and heat shrink to waterproof connections. 3: Make sure you have a dimmer / switch. 4: Face them out not up and maybe use red or green (won't blind yourself and attract bugs) 5. Don't just rely on the adhesive strip, clean the surface and use some additional glue. Hope this helps!😎

[@lojofishing]

looking pretty good b roll, and that's coming from a kayak fishing expert like myself!!!! Lol not really

[@seanwolff69]

lojo.fishing lojo loving the new hobie gotta come down and chase some Texas bucket mouths some time

[@fiveforfishing2366]

lojo.fishing but you are pretty much close to being an expert. At least you fish from a kayak and back it up with quality content unlike a lot of people in the comment section. 😂😂

[@julieinman2246]

I watch your videos keep up the good work

[@XNonexistenceX]

I just bought the Ascend 128T with pre wired yak power. My question is have you ever tried out the yak power led kits and if so how do you know how high or low to put your Led strips so that they are not in or under the water. Could the weight of your gear make it to were the lights are under water and lastly do they ever sale these in white because to me blue or green really doesn't match with My Kayak i have the same color as well... My set up : Front two rod holders has a simple upside down looking U shape Bar that connects the left to right from the rod holders about 8 inches high from the rod holder and it is made of Pvc pipe sprayed with Rhino Liner and i have a 22 inch LED 3 rolled Light Bar Mounted onto the Pvc Pipe. Then i plugged it in the front plug. The back is similar I have a upside down U shaped Pvc Bar which also connects together from left to right it is about 8 inches high with two 4 inch Led Lights also spray with rhino liner. The middle deck has 4 small Led Lights that shine down on the Deck. All lights are removable except the 4 small Led Lights in the Deck walls so i did not have to screw any holes on the outside or on top of my kayak. Myself i am nervous about drilling into it so i made my set up simple and also my front Pvc Bar that has the 22 inch Led Light has a 18 or 20 inch Rail mount screwed underneath for anything i might want to put on in the future.

[@doe4537]

Like if jon b is the best googan squad member!!!!

[@austinhocutt2627]

What i did on my kayak is I made an anchor system with a outdoor clothes hanger, small 3 pound weight, and a carabiner. Also you will want a kayak anchor trolley kit since you will be fishing bigger ponds/small lakes. This is not 100% needed but it is nice to be able to position your boat correctly.

[@brandonbaker7150]

I hope he realized he said his paddle was 240 inches which is 20 feet, longer than the kayak itself 😂😂

[@faithoverfear70]

just getting into kayaking fishing myself. ( been fishing all my life) now where i live, you can buy a 14 to 16 foot aluminum boat for half of what a good fishing kayak cost. now sure it's not the fancy bass boats- but they float and that is pretty much all that should matter. That being said- i think i am going to have more fun in my kayak then my boat! can't wait to see more customization.

[@ethanrising6500]

Yes on the new series. Call it "Pimp My Yak"

[@Dave_Ehlers]

Jon, get yourself the icefishing kit for your Lowrance. Hear me out here. The kit comes with a bag that stores the whole thing for icefishing and comes with a battery and ice tranducer. I keep everything in the bag when not in the yak (except my regular transducer which is permanently mounted to my yak). I use a ram mount to mount the unit to gear track on my yak and put the bag with the battery still in it in my front hatch with the wires coming out of the bag to power the unit. Then I can easily transport it, it takes very little time to hook it up and the battery is secure in the bag (along with everything I need for when the water turns to ice and I go icefishing). Win win. (You do plan on returning to the midwest for some icefishing, right?)

[@BassFishingWithTKHeaven]

Aquqdymatic 😂😂😂 great word

[@BEARDedOutdoors]

😂

[@BassFishingWithTKHeaven]

BEARDed Outdoors 👍👍

[@MrMetal69mulisha]

I'm considering getting this yak or the 12t. If space wasn't an issue would you recommend the 12 footer more than the 10? For tracking and fishing

[@daryljohnson3626]

I miss poor jon b when he lived in his moms house

[@bigginbassin4652]

Great idea with the LEDs on the yak, and out of experience I'd mount them on the side of the yak facing out and/or under the rails facing the floor so they don't blind you when you have them on. Love the videos and Keep Fishing Never Stop!

[@jordtheslumlord]

Jon b just got boted with dislikes

[@jwilson2536]

Just installed the scotty transducer mount on my kayak. They make one for that track system I think and the one I have has a place to mount the display of the fish finder on top of it. Also made a waterproof batter box so I can run my fish finder and a 12 v socket for a bait well if I'm fishing live bait or if I need to charge my phone.

[@CrankinCaleb]

Watercraft Tour 👌

[@Scxjunkie]

Crankin' Caleb tf

[@joshmilam1802]

Make a full build series out of this, I’m sure there’s a lot of viewers that would be excited to have content about budget things to add to their kayak

[@NissanRacer90]

You should install an anchor trolly to help keep you from drifting with the wind.

[@jtnoutdoors2991]

One thing I would suggest is a YakAttack BlackPak . It's for your tackle but it has a lid. It can be strapped down but if you where to flip the kayak it would keep everything inside. It also have rode holders on it as well. Just thought I'd leave the suggestion because I know from experience.

[@cashdog6331]

You should defiantly put some rigged fishing decals on it that would be sick

[@travizx0r]

You may be able to add the transducer into one of the scupper holes (where water drains thought the big holes in the boat) and put the battery in a sealed ammo can with rubber seals where you run the wires though. Yak fishing takes some getting used to, especaially on rivers, but it has enabled me to find the big juicy smallies that I love catching so much. Tight lines!

[@joeyt9988]

Anyone remember when he was jojobars😂😂😂🔥🔥🔥

[@tannercasares612]

These kayaks are strong, I had took mine down some class 2-3 rapids, and I capsized with my kayak pinned between a rock and 500lbs of water. LOL. There was no damage to the kayak at all not one bend or crack.

[@BassFishingWithTKHeaven]

Velcro strap for the battery

[@JonBrollin]

+Bass Fishing With TK Heaven I like it

[@BassFishingWithTKHeaven]

Jon B. 👍👍

[@mattmason9688]

Jon I have the same fish finder for my yak. They actually sell a mounting kit for the finder and transducer. It comes with a port that u plug the depth finder in and it runs off of 4 AA batteries. Also comes with a water proof bag and it’s easy to take out and put back it. Much easier then a big battery taking up space and adding weight. Good luck with it

[@fishingmojados1121]

Hopefully this doesn't become another regretful purchase like the Porsche

[@ninisis26]

I like how simple you are. I kayak fish in Wisconsin with my fl8 Vexilar off my kayak with my ice fishing rods for crappies. I think you should do a challenge with ice fishing gear off a kayak. What do you think!

[@alecwilliams1412]

"Your guyses help" I think it's time to learn to say "Yall" since you live in Texas now!

[@shadesshenanigans4989]

Hey Jon, Cabellas sells a fishfinder mount that holds the monitor and the transducer all on one mounting system that is completely removable. Great for your Kayak. It's around $45. It's all metal. Easy install. No screwing into kayak.

[@AvonNabors]

HEYJON!! GLUE STRONG MAGNETS ON THE PADDLE AND A LOCATION ON THE YAK. THAT WAY WHEN YOU HOOK UP, YOU CAN JUST STICK UR PADDLE ON THE YAK.

[@capenelson1560]

travis nabors have you tried this? Seems like a great idea.

[@capenelson1560]

Hey John, I have a Jackson Big Tuna. I have bungees on the sides and depressions in the gunnels to keep the paddle from moving... but the magnet idea sounds interesting. I have a friend that could really use that.

[@wd8661]

Sounds like a great idea, bro.

[@sebastianhennes3304]

That is the dumbest thing I have ever her and”face palm ”

[@gsxawd400]

Definitely want to get a dry box for your battery. Also number one recommendation for you, Werner carbon paddles, more comfortable for paddling and not getting electrocuted. Much love Jon b 🤙🏼🤙🏼

[@huey9992]

make a kayak series!

[@qpenrose]

For the LED lights just use automotive double sided tape it's made by 3M it's red there are many sizes (width) and it's waterproof of course because you have to put it under car trim, hope you see this and hope it helps! Ps get an anchor so you don't drift in the wind if your on a lake or big pond, trolling motor on the back is nice but not a necessity, and I'm sure you could find someone or a website that makes decals or even stencils so you can put "rigged" on the side of your boat. Great video !!

[@cmc7017]

Keep putting stupid funny clips at the end of you're videos I love them😂😂 like if you agree

[@MGk-Farmer]

every one should flood him with likes because hes my favorite fishermen to watch ever and yes for the motor so much easier you can spend more time fishing

[@jordtheslumlord]

I love the video Jon B your my hero!

[@paytonadams2452]

Love it jon! Some people with yaks don't have an idea on how to set it up and this series will definitely help them!

[@nikobrown8288]

Essskiitttt

[@bigtalljoebrown36]

If you're going to be out at night you're gonna want nav lights. You could use each led strip on a side of the yak and have one set up red and one green. There's some battery boxes for kayaks on Amazon that would keep everything water tight. Plastic ammo cans work well too, they just require some modifications to keep them water tight. These can be drilled, but I would use the special rivets that keep everything water tight.

[@bcfishing6446]

whats with all de dislikes?

[@BroskeeJoeskee]

As an avid kayaker, I would recommend putting the transceiver through one of the scupper holes rather than the mount. The wound could get in the way. Btw the black part is for standing in the yak. A little bit of elastic on the side and a hook of some sorts works great as a paddle mount.

[@DadlyGamerTV]

geeeeezzz these ratings. I hate ppl

[@mikechristopher7513]

Jon quick suggestion,when your working on the Yak in the garage get yourself a couple of cheap saw horse and elevate the Yak to waist level, it will make working on it a lot easier than sitting on the garage floor with pieces and parts all over the place. I love all the inexpensive mods tho. I did the same years ago to a Coleman crawdad it was a lot of fun. Good Luck with upgardes. I think Travis Nobs is on to something with the paddle magnets!!!

[@cameronnalley3197]

He’s been fooling us the whole time... his real name isn’t Jon. BUT HIS KZbin NAME IS JON BOAT. Ya get it? “Jon B”? You don’t? K I’ll go home...

[@User-1543]

Cameron Nalley j0j0barz3000

[@cameronnalley3197]

Big Rick wut

[@User-1543]

Cameron Nalley that was Jon’s original KZbin username lol

[@cameronnalley3197]

Big Rick oh I see lol

[@TheCkiser]

Please make a series on beginner fly fishing! Tips on fly fishing for smallies in creeks would be great!

[@christopherortega9585]

Jon b I recommend using a solar panel charger for the 12v battery and adding a 12v input female to charge your phone or camera batteries(mount everything on the crate) , get a kayak leash for the paddles and for the fish finder mount 3m clips on the sides of the kayak to hook the wires when running them to the battery, and use the railing to mount your go pro for camera angles

[@olivermoisio8377]

Did this have a follow-up video? I couldn't find where you finished the customization.

[@wd8661]

So cool...Just bought my first kayak 2 days before you...so much fun. Love your videos bro!!!

[@BrandonHvlogs]

What part of the brazos river are you fishing? I live on the brazos in milsap Tx. The fishing isn't real great on my end deepest part only gets above the knees.

[@BocheMan]

Hey Jon! I own the fs128t in white... I added an anchor trolley from yak attack to help with windy and strong current conditions..also I wouldnt mount the lights on top...instead either mount them on the inside part of that lip or on the outside......as for your paddle probs ...i would adjust your foot pegs so that your knees are slightly bent...then just let the paddle rest evenly in your lap instead of putting it on the deck of the boat. Hope this helped. Keep fishing never stop brotha! Super excited to see you in the yak!

[@squatch8820]

Nice. You should definitely get rod leashes and a top for your crate. I kayak quite a bit and have flipped twice. It will happen eventually. I also use a paddle leash. Most paddles float but you still don’t want to go swimming after it.

[@Tuckster1979]

I just got my first kayak too. I'm about where you are on figuring out how to rig it up.

[@garyb1635]

Lol, the struggles of kayak angling lol. The paddle holder is a great idea. I bought myself a paddle leash but I like ur idea with the paddle holder. I've installed those lights before and they come with not so good adhesive strips that will eventually fall off. Have u ever used contact cement? Get a tiny brush and contact cement and make sure u also buy some goof off or mineral spirits and a clean rag to clean up excess glue. Read instruction on how to aply because there is a drying period before u actually connect the light strip to the yak. Or ur other option would be to buy a bunch of wire clips that fit the light strip and doing it that way. But that would include screwing into the yak. Just remember if u screw into ur yak just put a dab of silicone on the screw or a lot of accesseries come with washers so u really have nothing to worry about. Just set ur screw gun on a lower setting so u done screw right thru the yak. There are plenty of kayak rigging videos out there as well. So they could help. Feel free to hit me back if u need more help.