Highest Horsepower Stock Engine 1.8T?

[@COMotorsports]

Did we surprise you?

[@BrendanMeara]

Yea but it would’ve been more realistic with a gt28 or gt30 because that’s the most common turbo upgrade for a Mk4 1.8. I want to dyno my golf gls 1.8t it’s on a stock turbo with a fat intercooler peaking at 27 psi but holds steady at 25 psi but I’m trying to get more power so I’m wondering what turbo to use.

[@BrendanMeara]

But great video I enjoyed watching

[@Risran]

Definitely, wasn't expecting it to crack 400whp

[@BobbyChubby69]

My guest was 420whp and 320wtq.You have utilise race fuel so im not suprise no.Hpentousiast made similar power and race it

[@COMotorsports]

@@BrendanMeara Not really, because the point was to see how much power it could make... limiting the turbo size only hinders it's abilities for the task at hand.

[@reecebower9934]

The only youtube channel that gives proper love to the 1.8t.

[@slic1one]

that's insane, I would never suspect a stock engine 1.8 mk4 to make this kind of power, that's sleeper status right there

[@OACSOME]

the 1,8ts were always at war with the VR6 community over which one can be modified to push out the biggest numbers

[@thetruth5232]

@@OACSOME Forced induction mods are a bitch to get street legal in germany. If it comes with a turbo, you can fit any size you want so we just build our little 4 bangers.

[@evanshireman5644]

@@thetruth5232 not to mention its definitely cheaper to upgrade the 1.8 than to force induction a VR

[@winky_ice]

You guy's are the KINGS of these 1.8t's!! Awesome work!!

[@euroberto85]

I was not expecting anything over 350whp before instant engine disassembly. Good job!

[@COMotorsports]

Thanks 👍

[@aerialasturias9785]

this 1.8t engines can handle 400hp easy, what kills them is the torque, that I think the limit is on 300ft-lb and then you bend rods, (obviously with a smaller turbo and lower rpm´s, where it´s easier to bend them)

[@rohancurtin2549]

Love this series! Definitely weird for me though because I have a MK4 GTI with the Jetta front end in the stock navy blue. It’s basically a less clapped version of the 1.8hoopT. Keep up the good work!

[@COMotorsports]

So it's just hoop.

[@Boostedlifestyle]

I appreciate the shout out homies 😍😍 keep up the grind 😁

[@COMotorsports]

Thanks man. Congrats I'm surprised it took you this long. 👍

[@hardcorebestnlrccarbuilder]

@@COMotorsports hope u het big tho i like the Volkswagen stuf i live in Nederland. Europa here the gas prise is alat so we cant have v8s mij neckt car is gone be a GTI MK4 golf i like thi know what they can handel When i gone tune the GTI vaen i Just put a biger turbo on and get araund 300 HP White out hurting the moter ??? Ore are there some upgrade needed to get IT Stay reliable ? Tanks for u time that u put in u good vids

[@Jamk14]

Damn I love 1.8t's. Crazy potential. Definitely surprised me wow.

[@87mustang347]

idn how this channel doesnt get more views. Awesome content guys. Keep it up

[@COMotorsports]

We appreciate the love. We just need to get in front of the right eyes I guess. We're trying.

[@Mk4heavenHD]

Wow what a result! My car is running hybrid K03s and maxxed at 294bhp. Torque is the killer in stock bottom ends of the 1.8T.

[@COMotorsports]

impressive numbers on a k03

[@samutoiviainen3351]

How much boost you got?

[@joelawrence1290]

Love this content! Been running a GTX 35R for 10 years! With IE rods of course!! Keep up the good work guys!!

[@ClassicallyNamed]

I HAVE to upgrade from my k04. If for nothing but a new grin. 02 a4b6.

[@KingAlmightyDee]

@@ClassicallyNamed just go to a t3/T4 50 trim and you’ll make good power. 16 psi is around 350whp

[@timmy2shoez]

Seeing this with the Jetta/Bora frontend makeS me happy. And definitely going to be doing the conversation to my GTI

[@jennekke]

I’m definitely impressed with the end result. I wasn’t expecting 350whp before blow up. I guess the torque earlier on really does blow these engines up. This probably feels like 80s turbo cars. Unless you’re over 5k it’ll just feel like a 2.slow with loud noises. I hope you get to play with it more before it goes boom. My guess is you’ve already killed it. I just hope you didn’t create an oil slick on the highway.

[@EastDallasKicks]

2.slow? You talkin about the 2.5 haha

[@danielthomas7318]

@@EastDallasKicks prob just on about the mk4 2.0 non turbo but Uk car they suck big time

[@EastDallasKicks]

@@danielthomas7318 ohhh yeah when I'm looking for 1.8ts all I see is garbage 2.0 mk4s. I just skip over em. But honestly Europe got cool iterations of cars. Yeah they had 1.4tdis not worth modding etc but the edition 30 and other trim packages are pretty cool, the US didn't get much and if say NA as a whole. Though Mexico did get some off shoot models can and U.s didn't

[@SyncroMotoring]

I was waiting to see the 500number. But regardless you guys didn't disappoint! Solid tuning 👌👌

[@COMotorsports]

Thanks, I'm gonna try. :)

[@nickhorsman1497]

This was pretty satisfying to see a stock 1.8 make that much jam! I had high hope's at a guess of 437 whp and 345 torque, but she still lives on for round 2. I'm pretty damn excited to see how much power my 1.8t stroker makes that you guys are in the process of building.

[@COMotorsports]

You guessed 368tq which is why you didn't win. Lol. Hopefully when it's all done and in the car we'll get to stretch it's legs on the dyno.

[@jaredriley1326]

For it having 340,000km it did pretty damn good you guys!

[@charles-antoinestephenson8350]

I know that shit is impressive😂

[@wilber3762]

Well guys, that was a great ending to a brilliant project. I wasn’t too sure about it when I saw the first instalment but you got me hooked. Keep up the good work. 👍🇬🇧

[@COMotorsports]

Glad you liked, I had a vision. Lol

[@HuntingfishingPA]

Been here since 3.5k subs! You inspired me so much with these 1.8ts builds! 2 years ago I built mine! Hopefully soon you can remote tune mine! Great job with making that power. Everyone always saw oh they won’t make more then 300 but never seen proof anywhere. Finally a quality video proving so! Great work!

[@COMotorsports]

Thanks for the love. :)

[@vr2jetta]

Great job guys! There is always someone who "made more" but like you said... SHOW ME! I'm legit impressed with those numbers...

[@COMotorsports]

Thanks, I'm sure it's been done... but here we are. :)

[@jarridforrence4072]

We did the same thing last year. We made 477 stock motor and ran 11.50’s for a half season before it grenaded at the track. kzbin.info0W3B3-IJw9I?feature=share I know you can make more than 477! Turn her up! 🍺🍺

[@jarridforrence4072]

kzbin.infougg0XBRhBvg?feature=share

[@luispadilla1675]

Awesome job guys, I made 419HP/364TQ on a Pulsar GTX3076R Gen II Stock engine as well, just be cautious because mine did not last long at that power level. Your power lines are really smooth, I wish I have the luxury to go standalone. My Mafless tune has really crappy lines lol ^__^

[@COMotorsports]

Oooo 364tq... So you're telling me there's a chance. lol

[@buddysshop1860]

Video or it didn't happen 😎

[@luispadilla1675]

@@buddysshop1860 look at my channel

[@buddysshop1860]

@@luispadilla1675 nice!!!

[@rocky19811969]

D&D beat movie ever!

[@itstrenttv]

I've never seen him have such a smile 😁 he's enjoying this build

[@rjack151]

The moment we’ve all been waiting for! Super excited to watch through this entirely! Hope you guys are staying warm up in your neck of the woods, been cold enough to freeze the balls off a pool table down here in Maine 🥶

[@COMotorsports]

Yeah this week was FREEZING... but early last week it was nice so we took advantage of it.

[@rjack151]

@@COMotorsports I’m excited to see more. Hopefully the border stops being wonky by the summer, love to come up and see you dudes run at the track

[@COMotorsports]

@@rjack151 Yes can we get back to normal. lol

[@raymonster2]

Iv been checking my notifications vigorously for this video to be uploaded.... And it did not dissapoint! That is seriously impressive power. Thanks for the awesome content, technical info and inspiration guys, you got me from talking about doing my car to actually swinging spanners and building. Im stoked that it didnt spill its guts yet, this series needs a few more episodes. Would like to see how drivable it is below boost range as it is now, and maybe how the stock motor would do with a slightly smaller (gt28-30) framed turbo that would be usable as a daily.

[@COMotorsports]

Glad you liked.

[@Bazukax]

Never would have thought over 400hp. Nice.

[@izzyauto6298]

Thank you. Videos like these help you understand the 1.8T engine and what can she handle. I know every engine is different but it helps. Thank you for these series.

[@COMotorsports]

Thanks for following along.

[@aquaman_5.04]

I use to have a stock Gli and the highest I could go on boost is 30 psi after a few runs with some friends I lifted the head 😂 these cars are amazing tho for being stock

[@bumcheekgobbler6529]

well no doubt you lifted the head 😂 24psi is what i had on my 1.8T and it held for a few months. i ended up blowing the turbo unfortunately

[@ryantempleman6551]

Awesome thing you guys are doing I’m building a 2003 20th gti that I got as a shell for 200 us. cool thing your doing keep it up

[@COMotorsports]

Thanks

[@karlaudinut9832]

Well I guessed 418 WHP 330 Lb/ft but not for very long and you managed to beat that so well done. You might be getting some wheel spin on the dyno, I could see smoke off the tyres and running in a lower gear certainly helps the rods. Looking forward to your trip to Mexico. Keep it out of 5th gear and don't bother with any two step or anti lag that will only end badly. At least you might not have to clean the mess off the dyno if it pops on the road.

[@COMotorsports]

yeah 2 step is definitely not happening. lol

[@lowdl]

Geezz. I wasnot expecting those numbers. I was waiting for it to blow up on that last run. Epic stuff. Looking forward to the driving videos. It's going to torque steer like a mother 😅

[@COMotorsports]

It would need traction to torque steer. lol

[@lowdl]

@@COMotorsports Perhaps in 4th gear 😂

[@roystonhughes3278]

Very explained video on the 1.8t 300 torque - 320 torque with a small turbo is more reliable than pushing a large turbo and have no longevity and spending more than what is required. Great video guys

[@nilsjohnsen7515]

Ur maybe a small channel but we really like what u guys are showing 👍 Keep it up the great work.

[@COMotorsports]

Much appreciated

[@klbroomes25]

Love seeing these 1.8 making power.. I’ve seen plenty of these make over 450whp stock block. It’s very possible to do it safely.. i been on this setup in my b5 a4 running for 7 years at 480whp 🙏🏽

[@COMotorsports]

We made a lot more than this. Keep watching the series.

[@klbroomes25]

@@COMotorsports yea I think I seen y’all made near 600hp?

[@COMotorsports]

@@klbroomes25 correct.

[@Holden4218]

Just sold my GLI 1.8T a month ago and bought a Tacoma… I’m happy with my Taco but damn all I ever did with my Jetta was a drop in K04 and full bolt on, wished I did more before selling it. But time to move on. Cool video

[@COMotorsports]

Thanks, enjoy the new ride.

[@javidgunraj1500]

100% shocked by the result but was amazing to watch > [ >

[@COMotorsports]

Thanks.

[@bardahanconstantin1318]

with respect from Romania. you are and are the best. because of you and the KZbin channel I ended up buying a Leon M1 1.8t auq.

[@COMotorsports]

Appreciate the comments. Best of luck with your project.

[@j-bling8664]

Literally kind of what I want to do with my stock longblock Jetta 1.8t. But I only want roughly 360-380hp and low torque just cuz I’m too lazy to put rods in lol. When income tax comes around. I might just have to make an appointment and a personal trip out to you guys to get this done for me

[@COMotorsports]

👍👍

[@Euro_Rat]

Heck Yeah! awesome vid guys amazing results!

[@COMotorsports]

Thank you! Cheers!

[@rfcmironchuck8628]

Proudly, canadian shops showing there skills, well done !

[@COMotorsports]

Thank you very much!

[@ΓιωργοςΚυπριανού]

Nice video, i have an Alfa Romeo Giulietta QV, stock engine, stock intake manifold, i installed Garrett G25-550 with tubular manifolds, aem methanol, i dyno the car with four wheel drive caused it was spinning on the dyno and made 372whp

[@anonlincracing2484]

Honestly you've actually put the 1.8 T on the map god I'd love you to map my golf 🥲🥲🥲🥲

[@COMotorsports]

Nah, this stuffs been done before. We just went about it in a fun manner. :)

[@donnelhuddleston2478]

Miss my 03 Audi TT QUATTRO 225, just wish I had a replacement for it, with a engine maxed (at least 1000 HP) out by you guys, just rods, BIG twinscroll EFR 72 -76MM Turbo, top shelf AEB big port heads, and a Hella stout custom DSG, or Manual gear box ETC.

[@treynewton9381]

Requested next step: To make it more fun by keeping it in boost between gear shifts, swap in a DSG from a 2.0T + tdi flywheel.

[@rickyvwt]

I was thinking the same 🙋‍♂️

[@COMotorsports]

Thanks for the idea, but it will be dead before then. lol

[@buddysshop1860]

Wow! Didn't expect over 400 😲

[@opadilla123]

Good power for the dyno on the real world doing pulls it will blow up with those numbers stock

[@BigSteve_Gaming187]

It's 18°F (-7°C) here in Central Wisconsin rite now. I guessed 316... So I was fairly close... Don't think I'm gonna push my stock AWM 1.8T in my 04' Passat Wagon that much... LoL

[@StixGarage]

Clayton fearlessly going towards the motor(with the camera) when the run is going on, was indirectly suggestive that the motor wasnt going blow, lol.

[@MrLakerboy824]

That engine jump looks scary

[@COMotorsports]

yeah not ideal. lol

[@patriklenck1735]

engine Mounts are desperately crying for mercy :D i´m halfway through and ecxited when the Rod wants to go ;D greetings from Germany lovely Content sofar !

[@COMotorsports]

Much appreciated, thanks for following along.

[@patriklenck1735]

@@COMotorsports wow impressive it hold the 30psi, is this a small or big port engine?

[@COMotorsports]

@@patriklenck1735 stock AWP. Small port.

[@GearGuy2001]

Great content, just stumbled on your channel today looking up GTI performance for an eventually future car. Love how you dug into the details and showed the progress on the car dyno/tune. Looking forward to future videos.

[@COMotorsports]

Thanks for following along

[@santijaos]

I have an Audi A3 with 1.8T AGU engine, with haltech Elite ECU, and 2 stage of nitrous with 500 hp with the stock engine per more that 2 years and work perfectly. I use knock control and e85 and with a good tune this car are almost bullet proof

[@halvdan7978]

The 1.8t AGU blok is lengedary in its own way, common mods Decat - Downpipe - intercooler - Chip = 220hp and these runs easiler for 500.000km its, perfect daily beater which last for years and cheap parts are available still in 2022. Can recomment for anyone looking for a first car or just your daily.

[@Euromike]

That’s crazy I didn’t expect that

[@bustacap12]

Subscribed !! All the way from Maryland, I appreciate all your content. You guys ROCK !!!

[@COMotorsports]

Thanks for joining in. 👍

[@ItzTrxv]

Absolutely loving this series!

[@COMotorsports]

Thanks

[@s2upid]

I know both Billy and boostfactory made high 400s about 15 years ago using an AEB. Those threads and image links on vortex are long dead at this point though.

[@COMotorsports]

AEB definitely isn't the same due to larger ports in head and intake manifold, also larger pins. However I believe Billy's was a small port head and 19mm at least not sure about intake manifold and TB. He did 461whp with nitrous but I can't find the dyno sheets to know what it did for torque.

[@onlyrealones]

I thought Billy T made 491 then it broke a rod

[@COMotorsports]

@@onlyrealones no doesn't appear. He's in the comments here as well.

[@gavinstrange955]

You guys should do a stock Afp Vr6 turbo stock intake manifold 🤣 would be cool till about 15-20psi when the manifold blows out 🤣

[@jared4670]

Loving the Jetta front on this golf

[@kdot3698]

Love this series, great info for a dumb 22yr old like myself. I can link you to a page of some making 400+ stock internals, and I think 1 just 1 500 can’t remember. but I don’t think many if any got much life out of it

[@COMotorsports]

Please do.

[@kdot3698]

It was the 400hp club forum but I think it was taken down :/

[@kdot3698]

Some dude apparently make 490 for a run or 2 and some guy in PR supposedly ran 450ish for around 6 months

[@kdot3698]

If it doesn’t help any atleast take it as props compared to most struggling with 350+

[@kdot3698]

It won’t let me post link

[@alescampos6299]

Super nice! Great proyect and videos! who would say that this engine lasts so long being stock

[@yotawilly2745]

Love it guys and all you do. I definitely need some swag

[@COMotorsports]

Thanks for the love.

[@GarethTaylor-z3f]

I get its an old video but dam I wish I could get u guys to set up my cupra 1.8t

[@bumblebvr6]

Great job and content again gents. Really wish more people would actually watch the video instead of asking questions that you meticulously stated in it :-).

[@COMotorsports]

I assume they're the same people that don't use the search function. Haha

[@dr.kleiner8500]

My guess was 370hp and 360nm, didnt expect it to go so high, i guess my next 1.8t project will be right around 400hp

[@Elrafau]

it will explode on stock motor for sure

[@Elrafau]

you shouldnt go over than 400 NM on stock 1.8t

[@DavidHarnadek]

No offense if Kyle is your friend but I don’t watch him anymore. I prefer your channel and the way you go about things. Keep it up and thank you.

[@javidgunraj1500]

Cant wait to see how it holds up on the road now with repeated pulls

[@InCoNsiSTANtGAMER]

I just knew it would explode.... love 1.8t

[@javidgunraj1500]

Engine management and fuel system definitely made a difference I believe but the powerband to keep it alive wouldnt be ideal imo

[@COMotorsports]

Totally agree

[@teithansen8663]

Greetings from Denmark, fantastic video👍😊I have a TT with 225 hp APX engine Can it run 320 hp and 300 ft torque without the rods bending on a stock engine ?

[@COMotorsports]

Depends how it's tuned. But it's very common to do what you're asking. Plenty have.

[@richt247]

Its all about the torque, most 1.8t maps have a huge torque spike as the turbo initially spools to make them feel fast but on non built engines rodney comes a knocking! Ask me how i know lol

[@robertalan4346]

Ya'll are the real mvp's! Nice work! You happen to be hiring? 😎

[@kristionmena7931]

Great content these past few videos.

[@COMotorsports]

Glad you like them!

[@drifthero1176]

Hopefully if nothing goes wrong I should be able to go big turbo soon on my b6 A4. Hoping for 350awhp with a gtx3071r gen 2. Great video and great info. If you can can you share some data logs? If not it's understandable. But thanks so much for making this

[@MadAdventure919]

Wow. That's was a big surprise.

[@IcanDriveIt]

I used to love these Mk4 GTIs. The 20th anniversary GTIs were dope. The 2004 R32 was dope. Definitely the golden age of VW for me. I think the heyday of these cars is over tho.

[@COMotorsports]

Yes and no, I think those cars you mention will be around and popular for a long time. Just because they're different in their own ways.

[@davenewton5895]

I wish I had more disposable funds! I would buy more CO merchandise! I’m on the south shore of Lake Ontario 30 mins south of Rochester ,NY . Love the content! Keep it coming bro! My beetle is on a GTX3076R . 1000cc BMS MODIFIED flow injectors, 034 high flow rail SS PTFE LINES ETC.

[@COMotorsports]

We appreciate all the support. 👍

[@rolly5009]

Well done 👏🏻👏🏻that’s impressive figures. Made more power than most 1.8T on this channel with built motors 😂 I wonder what the max would be with cheap drop in rods without trashing it…any ideas on figures ?? What’s the plan for this now ?

[@COMotorsports]

Only because those are client cars and we care about their longevity. Obviously if they didn't care we'd push them way further. Also Ethanol which we're running this car on isn't available at the pumps here so tuning customers cars on it isn't much of an option.

[@berube361]

These motors can handle plenty of power. Its torque spikes that bend rods. All about a perfectly dialed in tune with a turbo that has some lag. Ive seen several others try this in the past and pretty sure they made higher numbers and survived for decently long because of having a perfect tune and slow spooling turbo to save the rods.

[@COMotorsports]

We're looking for proof. So if you have any sheets please forward them on. We know of at least one that's higher but looking for any data.

[@robertkortright2428]

No wonder why those mk4 guys fly past you while spitting flames those engines are ridiculous!

[@buddysshop1860]

Yes that was me that past you 👍

[@tylaskab]

Good effort boys! But..... I made 460 wheel in 2001 in my Mk4 on a completely stock engine. And 490 wheel on a stock AEB swap in my Mk2 in 2003 ish. 1.BillyT lives! 🤣 Turn it up! Nitrous down low killed the AWD. And wheel spin on the street killed the AEB. I think wheel spin and over Rev is more dangerous than the torque. Good luck!

[@COMotorsports]

Care to share the dyno sheets. Would love to see them.

[@buddysshop1860]

Pics or it didn't happen 😎

[@digital8oh8]

If this is the 1.8 Billy T from Vortex back in the day. I'm sure there are some archived threads to back up his claim.

[@COMotorsports]

@@digital8oh8 100% there is. I just can't find any dyno sheets unfortunately.

[@buddysshop1860]

@@digital8oh8 good old vortex days. I kinda miss them

[@jquillenwest6168]

Nice I knew it could be because Mike hood had similar numbers years back on stock internals as well but in the Audi a4 1.8t

[@COMotorsports]

We made 600whp with this one. This video us older.

[@itstrenttv]

Good quality vid, great info we need to blow this up. *the video, not the golf*

[@COMotorsports]

We appreciate that. 👍👍

[@codyquigley8242]

Hell yes ! She is holding up a lot better than I was imagining ! Great work guys thanks for the content 😎 I guess #18tneverlose yet.. hahaha

[@COMotorsports]

Appreciate it.

[@stephankvistgaard2597]

in denmark we are running 300-320whp no problem on 99octan no wmi, 1,1bar on a gt2871 street car, im building a stock block with a gtx3076 and wmi hope for 440-450ish whp.

[@blairhong6089]

Keep Going Mr. Kramer! 😁

[@jahirrodriguez6229]

Nice job guys! Thanks for the videos! 👍

[@COMotorsports]

Thanks for watching

[@dubCanuck1]

West Coast? Come on Dave. Fort McMurray last saw water in the last ice age, lol. Thumbs up on the shoutout for Kyle.

[@COMotorsports]

It's past Ontario...it's west coast. Lol

[@robertaBooey69]

The fact a vw with 200,000 miles still running let alone a turbo 1.8

[@COMotorsports]

Exactly

[@neildantino4709]

INSANE ON A STOCK SET OF RODS & STOCK VALVETRAIN

[@COMotorsports]

Yep lol

[@fyuni-tek9422]

can i see what happened if you bump up the coil packs to 20v please ?

[@anthonyconti1065]

Sick video .. always great content from you guys... with your experience with the 1.8t in these .. what would you say would be the max you can push on a stock one and daily drive it reliably ? I was thinking around 270 hp.

[@COMotorsports]

I cover it in the video.

[@wanagala]

My friend got one with K03's and 270hp without any problem it's his daily

[@noahvargas3551]

"DANGER TO MANIFOLD" Flashing 🤣 🤣 🤣

[@frankpolletta421]

I think next time it will make 465 whp an 350 twq

[@97kx211]

Awesome video. Do a mk4 2.0 add a turbo Or 2.5 / turbo. These videos make me want more for my 2.0 lol

[@xDiGGi3x]

That’s crazy 😆 If you wanna beat a mk7R I’ll meet in Mexico, lots of snow this time of year😂

[@dariusgodden2392]

Wild is not even the word, this is amazing!! So considering you guys mentioned stock Throttle Body & Intake Manifold, would there be any merit throwing on any aftermarket upgrades of those you might have around to see where that takes things before you grenade it? Or is that going against the whole "stock everything"

[@COMotorsports]

At this point there's enough power to wreck everything by just using timing/boost. So yes putting a better TB and intake manifold would help make power easier... it's not going to make it make any more overall power. If it's going to break at say 450whp... it won't matter what TB/intake manifold is on it. If we were tapped out on it making power, sure we could do things like that to help free up HP, but at this point it's just a couple keystrokes away from making more/wrecking the way it is. lol

[@jamesbarber8308]

More than double stock horsepower is crazy

[@COMotorsports]

Stock wheel horsepower would be about 160whp, this ended up making right around 600whp. So almost 4xs as much. Lol

[@Mazdaspeed_lifestyle]

I really hope the plugs was changed and maintained was done this is amazing I love it. I always knew these cars can handle a fuck Ton

[@COMotorsports]

In regards to maintenance here it is. Plugs were swapped out for a used set I had on the bench. Oil was changed, oil filter was not. :) Original coil packs as well.

[@Mazdaspeed_lifestyle]

@@COMotorsports DAMN original coils that’s so impressive really makes me wanna build one so bad

[@karelkazik5702]

Amazing guys.Its crazy.Stock engine.

[@COMotorsports]

We agree!

[@RundUmsGamen]

why no test, u guys need to start doing some testdrive and pulls with the cars especially with this project

[@COMotorsports]

It's the middle of winter here.

[@Douglas_Reuber]

damn sounds brutal, i want it

[@jesussavescars807]

If u wanna keep the words stick use aeb rods and na cams then up the boost or u can use 1.8 crank with with 2.0 rods from the tsi and aeb pistons I’ve ran that setup with a hx40 made 526whp on 14/15psi

[@COMotorsports]

This is stock unopened 1.8L AWP, small port, small pin.