Beginners Guide To Buying Lift Kits | The More You Know

Trying to figure out how big to go? We got you: cusoff.com/suspension
Buying a lift kit isn't easy with all of the options out there today. It can be difficult to find the exact ride quality or features you want. In addition, there may be a little more than just the lift kit components that you should install or replace... Fuller breaks it down in this week's episode of “The More You Know.” Come learn all of the essentials you need when it comes to suspension and aftermarket lift kits that make sure you are getting the most out of your Truck.
0:00 - Beginners Guide To Buying Lift Kits | The More You Know
0:34 - Wheels, Tires, Suspension!
1:50 - Should you cheap out?
2:42 - DON’T Overmodify
3:38 - Worn ball joints
4:53 - Outro
Follow Us Everywhere:
Facebook: / customoffsets
Twitter: / customoffsets
Instagram: / customoffsets
TikTok: / customoffsets
Snapchat: / customoffsetstm
Subscribe now ► / @customoffsetstv
#customoffsets #trucks #CustomTrucks #Wheels #Tires #Suspension #LiftedTrucks #LiftKits

[@CustomOffsetsTV]

Trying to figure out how big to go? We got you: cusoff.com/suspension

[@johnnydough8841]

Starts at 2 minutes.

[@WillfulTangentOutdoors]

Not all hero’s wear capes 🫡

[@tylerbrown9357]

Top man.

[@aaronbell6837]

bought my first truck recently and I'm completely overwhelmed by all of this. This definitely helped!

[@HEXEIV]

How's it going now that it's a year later? I bought my first truck over a year ago and I'm only now wanting to do all this!

[@georgecook1374]

I hear ya and the decideing on 3" vs 6" is so hard

[@jerryshoe7827]

Glad to see Fuller is back, the boys did and do a great job, but all the boys interacting with one another is better.

[@kennylandrum7875]

Fuller I think I speak for all the ogs we have missed you

[@DCarter355]

Fuller is back, that’s awesome!

[@masonhatch5514]

How much does labor cost usually run for when installing a rough country 6” lift?

[@WhatsthePOINT_EDC]

Another good one. Went from wanting a 24x14 until I saw how insanely wide my truck will be. Maybe I should get some 20 with a 35 or 37 and play this one safe. Thanks guys.

[@danielramsey5080]

A 20x14 is just as wide as a 24x14

[@ronthompson6596]

I did a level kit on a new 2014 Silverado. I hate it. Went from good suspension to a stage coach. FML. Now looking at a BDS 2” lift. Won’t break the bank and seems to be a good lift. Any thoughts please let me know. Thanks

[@rmmcgann]

I’ve never been more lost on a lift. I have a 21 fx4 ranger and wanna go more than a level but don’t wanna start cutting stuff either lol. I do go off-road but in south Florida it’s more about sand and mud than anything else to get to our hunting/fishing spots. Tire n rim choice is even worse for these things with the crash bars. Ngl starting to miss my jeeps… they were so easy 😂

[@CustomOffsetsTV]

This 3.5 kit doesn’t require you to remove your factory cross member - www.customwheeloffset.com/store/suspension/67858/bds-suspension-35-coilover-lift-kit-19-20-ford-ranger-4wd?year=2021&make=Ford&model=Ranger&drive=4WD -Fuller

[@Elaine_S]

What lift kit do you recommend for a 2015 yukon denali? We want like a 3-4" lift

[@dustiwolfe4335]

I have a 2006 Silverado 1500 that when I bought it had some sort of a leveling kit or lift on it idk what but it has shrunk in time and I want to get it back up some. Nothing extreme. I have put on almost every new part on the front upper control arms, wheel hubs and bearings, brakes, sway bar bushings, sway bar links, cv axles, pitman arm, idler arm and bracket. Now I have to replace the bushing in my torsion bar crossmember and the lower control arm bushing. I run 33x20x12.5 tires I want my truck to be back to the hight it was before just a little higher. Am I going to have to replace all the new parts I put on if I am able to get my height back ? And how do I do that? Please help!

[@archivaldo4310]

Hello do you recommend rough country lift kit or should i go with fabtech i have trouble deciding

[@1mldn545]

Ive had my truck for about 4 years and its a stock 07 dodge ram 1500. Im just getting into lifts and wanted to fo a 4in leveling kit. My budget is 2000$ but i also want to do onboard air compressor, winch, and some other offroad accesories. I was looking on your website and saw a 800$ kit and a 1200 dollar kit and since i know nothing im unsure of the differences. Id liek the 800 to have more room in my budget but i dont wanna sacrafice quality because ill bee working in some rough terrain in the mountains.

[@masonwilliams3379]

Fuller in the video gives me 2020 nostalgia

[@deathscythehell7937]

When I done my first lift kit I wish I had spent the extra money on a quality kit instead of cheaping out. Then there's the wear on all ready weak parts I had no idea was weak. I spent way more on replacing parts than I would've spent on a quality lift kit. Now I know better I replace all parts that could wear out with high quality heavy duty parts. I do it all while I have the suspension apart so I don't have to do it twice.

[@JoebWhite3]

5:13 ok I want to put a lift kit on my 2007 ford edge what company would be best to go with for the parts I need

[@beans6989]

I have an rc 3” lift for a 2002 4wd Silverado. Say I’m okay with replacing front end crap frequently, if I put in some quality shocks will I regain my ride quality?

[@CustomOffsetsTV]

It'll definitely help pick it up in quality!

[@brazillybroOPM]

I’m new to this some so any advice helps. Simply trying to give my 4runner sr5 that Trd pro look, at most 2 inch lift. What’s the most affordable options? Not looking to go off roading just simply give it that trd pro look and not have to worry about it messing up going thru train tracks, potholes, speed bumps, etc throughout the city.

[@CustomOffsetsTV]

Hell yeah man, take a look at our gallery and that should help you find different options! customwheeloffsets.com/gallery

[@brazillybroOPM]

Much appreciated it! Thank you!

[@bc_usa]

​@@brazillybroOPMNo!! Thank you!!

[@Daywalker777r]

"beginners guide uses a fuckton of words idk"

[@bigbob4191]

Love the Iron Maiden intro music

[@backyardbuilt_5.378]

Ya do all the front end stuff good or bad if you’re truck has anywhere close to 100k or over. Parts will be worn. I made the mistake of installing the lift and then 6 months later back into it to redo all the front end parts. Also figure out how big you wanna go. I wanted to go 9” on 37s but liked the look of 4” on 14wides and street tires like I have now. (Had33x14.5s) if you wanna go big just do it. I’m now dropping over another 5 grand in a new lift wheels and tires. After already spending that less than 2 years ago

[@leadpilled5567]

If your truck has many miles on it you’re stupid not to replace ball joints and tie rod ends. They’re cheap parts and not much in labor since everything it torn down already. Might not be a bad idea to look at the hubs too. Everyone have a budget but with that stuff it’s pay now or pay more later. Good time to check out the CVs too

[@A_Chevrolet]

How about a “so you want an OBS Chevy” video? Day 1

[@whoiselijahlll5395]

are keldermans air suspension good enough?

[@audi5306]

I replaced every suspension component possible when I lifted mine. I probably saved 1000-2000 in labor because of it. They had everything apart so might as well even if they arnt worn

[@CustomOffsetsTV]

Thats the way honestly. That way everything is clean, new and fresh!

[@markriberdy7685]

I Absolutely agree... I've replaced lower ball joints, bearings, brakes, tie rods and upper control arms while i installed my lift. Saved over $1500-2000 in labour costs alone. Plus... wire wheeled all the surface rust and coated the components at the same time.

[@jeffrentsch4318]

Labor who pays you to turn wrenches on your vehicle? Guess I have an advantage first engine swap at 14, ambled Rockwell Heavy Vehicle Suspensions (building lifter and slider units), currently day job is heavy equipment operator/ mechanic...

[@audi5306]

@@jeffrentsch4318 I don’t have the tools for wheel bearings, axle shafts, axle shaft bearings, coil springs, shocks, mount and balancer for tires, alignment machine. It’s a lot more then a wrench bro

[@riccjaccson6876]

Do you have a lift kit for a 2018 Toyota Sequoia Sport 6-9 inch? And will that mess up my ball joints?

[@CustomOffsetsTV]

Give us a call or send us an email and we can help you out! [e-mail] OR 920-949-0909

[@Directory1]

I won thx man!❤

[@PrettyBoyReynard]

Can you tell me how to lift my 1993 toyota celica? I need help...

[@WesterlandVentures]

Just nabbed a Have Hope shirt :)

[@CustomOffsetsTV]

Hell yeah man! Appreciate the support!

[@ethanpope410]

(I’m not a car guy and don’t know shit) My biggest confusion is like my truck kinda needs struts and maybe shocks. AMA I able to just get a lift kit? Does that include replacing those?

[@erikfossum4984]

My issue is i just need to know do i have to buy a leveling kit to kevel it out then buy a separate lift kit to make it taller

[@CustomOffsetsTV]

Almost all lift kits will create a level stance

[@galvezlawncare2754]

Hi good video, I have a F2500 súper duty XLT 2,010 I would like to lift it a little bit Need advice not trying to go broke.

[@galvezlawncare2754]

Hello I still need an answer what do you recommend I have an F250 súper duty 2,010

[@CustomOffsetsTV]

Here’s a affordable 6” option for you! www.customwheeloffset.com/store/suspension/4101/rough-country-6-ford-4-link-suspension-lift-kit-4-link-08-10-f-250-350-4wd?year=2010&make=Ford&model=F-250+Super+Duty&drive=4WD -Fuller

[@tonyb-50]

Liking before I watch, cuz this is me

[@Doom6.0]

BDS! 😎🇺🇸

[@Oscar-eo9un]

What would I need to lower my 6inch rough country lift truck to a 2-3 inch lift? It’s too high for me and I want it lowered

[@Oscar-eo9un]

A 2005 Toyota Tacoma 2wd drive

[@Eternal252]

I have a avalanche and I want mines lifted like the burgundy one in your previous video but the 3.5 in person don’t look the same 😕

[@bc_usa]

Mine and doesn't. Please learn proper English 🙏.

[@Eternal252]

@@bc_usa oh you one of them huh tell your mother to have dinner ready I miss her

[@Spdeadstock]

I have lifted 4 trucks in my lifetime. Spent Thousands! Yes it looks cool but thats about it. The best advice i can give to a beginners is the same advice i got when i did my first truck. DON’T DO IT!!!

[@CustomOffsetsTV]

Still gunna do it, looks dope !

[@jcghostin3252]

I have a factory 2 inch lift and wish it was a little bigger like a 4 inch. Wish I could win someone to do one on my truck

[@larrybailey1896]

Old ball joints on a new lift gives truck front end that Natty Daddy feeling ...

[@Pskiff18]

Yall only carry readylift and RC for 5th gen ram 1500 now? That’s all I see on the website

[@CustomOffsetsTV]

BDS, Zone, Belltech + the brands you mentioned and more! www.customwheeloffset.com/store/suspension/4101/rough-country-6-ford-4-link-suspension-lift-kit-4-link-08-10-f-250-350-4wd?year=2010&make=Ford&model=F-250+Super+Duty&drive=4WD -Fuller

[@adrianlastname4864]

is there still a giveaway truck?!?!

[@gherasimtibi]

Good thing I know everything I need to know about my lift kit, it's waiting for my wheels for months from CO for my dually that's killing me

[@CustomOffsetsTV]

We know your pain! You can always go to customoffsets.com/track for the most up to date information if you haven’t already been in contact with customer service 👍🏻 -Fuller

[@johnnygeorgopoulos4072]

All this talk about lifts, and I'm just trying to afford getting my oxidized 15x10 Pro Comp 69's wrapped back up in 35s 😅

[@CustomOffsetsTV]

We feel ya man!

[@HoodieBillsGaming]

Is this available , the giveaway

[@RonStar502]

Your website didn’t offer a lift kit for my car 😢

[@CustomOffsetsTV]

Well we do sell lift kits for trucks and not cars.

[@MatthewSenneke]

“Won’t break the bank” and $2,500” don’t fit I. The same sentence together

[@e-manpn1238]

👍👍🔥💯

[@caliboi3820]

Wish I would of know how bad my Mpg would change. Lol looks GREAT though lol

[@caliboi3820]

That's adding wheels and tires of course

[@jeffshultz3883]

Hurts the wallet! Don't it? But mostly every sacrifice in life also has a good side to it. It is what it is.😉

[@FAST_EDDIE]

Old video? or is Fuller back?

[@SoreTv]

Fuller is back babyyy

[@CustomOffsetsTV]

He's backkkkkk

[@FAST_EDDIE]

@@CustomOffsetsTV LETS GO!!!! I’m sorry to say but CO was not the same without Fuller

[@whocreek]

Yea uh. I don't have any options.

[@tonyb-50]

Looks like I need a dumber than dummies video

[@kyleperez2572]

I enjoy fuller way more than Dustin! He’s just a natural and Dustin is a trying to hard

[@wl.industries9161]

I like dustins enthusiasm, but fuller always does a good job idk how to explain it he just talks calm but not boring

[@brianbowen9024]

i wish it was cheaper to get multi things done at once, you think it would be, sadly here they price everything like thats all there doing. mechanics are such crooks here.

[@CustomOffsetsTV]

I mean if the part already has to come out to do the lift kit, I'd prefer to put in new stuff, means you can remove the old stuff by any means necessary, and the new stuff slides in like butta!

[@user-us5ns3fo9k]

Pay labor lol