Cut TI Base Height Digitally in All On 4 [ Exoxad Tutorial for Screw Retained Implants ]

[@DariusCostache-t7v]

Thank you for the video ! is it possible to show how you design the digital cylinders ?

[@masterdentaltechnician1914]

Thank you for watching the video and the question. Do you mean the Temp Cylinder?

[@DariusCostache-t7v]

@@masterdentaltechnician1914 yes,i was a bit lazy and i scanned them but there are too many triangles for starters, and now i am stuck on generating the shells for them to get the different cementing spaces. I am going for 0.03. 0.5 and 0.07 for pmma. Also i am trying to design the multi unit angled abutments 17 and 30 degrees. It would be helpful if you can direct me to a specific software to do so. Thanks!

[@masterdentaltechnician1914]

You can use Meshmixer for that. You can use the 12 mm full version of the cylinder to cut it down for your needs. The process of creating a library out of it like I did is quite time consuming and you have to do that in Exocad and Meshmixer. It is too complex to explain here in the comments

[@hoshingupendra]

Really useful video and thanks for creating this library. It would be good if you could add more scan bodies

[@masterdentaltechnician1914]

Can you tell me which ones ?

[@clinicaldentalcadacademy989]

camlog @@masterdentaltechnician1914

[@masterdentaltechnician1914]

Check Version 2 on Patreon. I added Elos, Medentica and Preat

[@d3min]

well done 👍

[@masterdentaltechnician1914]

Thank you!

[@kristijanmalus48]

great video.

[@masterdentaltechnician1914]

Thank you

[@TùngLê-t5u]

Hello Master! Can you make an all-on-X design video without using waxup? I have a question: is this waxup model made of wax or plastic? Is it available or do I have to do it manually first and then design it on the software later? Because there's not always waxup to do it.

[@masterdentaltechnician1914]

You could do an All On 4 case without a preOp even though it's not recommended. Just print it in PMMA as a try-in

[@TùngLê-t5u]

@@masterdentaltechnician1914 Thank you so much!

[@ryanmay4737]

Very cool. What is the cement spacer in this library for the temp cyliders? I think DESS TiBase is 35ųm

[@masterdentaltechnician1914]

I put the cement spacer at 0.166 mm and a flat liner surface. When you scan those in you usually have these structures of the TI bases in the bottoms. Some mills don't like that causing too tight of a fit. It's even worse in printing.

[@Inidsficjsdcjsdijisd]

Great!

[@masterdentaltechnician1914]

Thank you

[@cvMouse]

Very usefull! Many thanks :)

[@masterdentaltechnician1914]

Thank you

[@aviratpatil4249]

Is it available for arum scan bodies or dentium implants? Thank you

[@masterdentaltechnician1914]

No unfortunately not

[@mosheberger2232]

I really appreciate this video! I am a prosthodontic and was trying to figure this workflow out for a very long time.... Please select me as the winner for the files!

[@mosheberger2232]

*Prosthodontic resident

[@masterdentaltechnician1914]

Thank you.!!

[@omarnagm3464]

Hii.. i would love to have the library ... following you from Egypt!!

[@masterdentaltechnician1914]

Link to library: www.patreon.com/MasterDentalTechnician/shop/customizable-multi-unit-temp-cylinder-166929?Link&

[@Inidsficjsdcjsdijisd]

How could I add another scanbody from another brand?

[@Inidsficjsdcjsdijisd]

or could you print those scanbody?

[@masterdentaltechnician1914]

Which ones do you want to add? I can add them for you.

[@TùngLê-t5u]

Experts can make a video showing how to create customized designs from suppliers without the connected scanbody and abutment.

[@masterdentaltechnician1914]

I believe what you are asking is to design a Prothesis from a tissue scan only without any references to the implant positions. I believe it's not possible without any kind of idea where the implants are.

[@TùngLê-t5u]

@@masterdentaltechnician1914 So for companies that don't share implant library data, is there any way to design individual abutments? For example, in my case, MyQ - Yesimplant from Korea. Thank you expert!

[@masterdentaltechnician1914]

It's hard to tell from the limited information that is provided on their website but it looks like a Nobel clone. I would try different scan bodies from other companies and go with their library/scan body.

[@sgt_wolf]

You sound like Giovanni Giorgio

[@masterdentaltechnician1914]

I don't know who that is but I will take it as a compliment 👍❤️🙏

[@sgt_wolf]

@@masterdentaltechnician1914 Look for Daft Punk - Giorgio by Moroder Definitely a compliment.