Cutting & Bending a Pipe to 30°, 60° & 90°

Explore a wide variety of content in our carefully curated KZbin playlist: • Binge-Worthy Content
Find more amazing tips at @TotallyHandyShorts #shorts

[@Pro18YT]

The forbidden Toblerone

[@ProleDaddy]

Top comment

[@onik6512]

It’s only forbidden to those unwilling to try….. go for it son!… I believe in you🥹

[@banditbastard2585]

Damnit you beat me to it 😂

[@boss30045]

I was just thinking about how it looks like a toblerone

[@fred7615]

@@ProleDaddy really?

[@jgetscensored7837]

Impressive. Imagine how long it would take to build something as complex as a car chassis using that method

[@TJayMid]

thank god for metal stamping and plasma cutters

[@xbear7473]

Car chassis aren’t typically built using that method because that method would weaken the chassis. All of the bends would be bent by bending the pieces of material

[@jgetscensored7837]

@@xbear7473 I can’t speak in certainty, but I’d imagine somewhere in history, there were cars built this way. But as for weakening the material, I wouldn’t think so. That’s how modern day race car chassis and roll cages are built. (But with tubing, not square material)

[@bryceprimary2024]

@@jgetscensored7837 tube is used but the joint construction is designed so that the stresses of the joints are directed straight into the other tubes and not into the joint itself. With a design like this it should only be used in non-structural applications. As opposed to having no weld joints with bending or potentially just 1 or 2 welds with this method you’re adding over 30 welded joints that cannot fail and with something like a chassis in mind the forces will be applied directly to these weld joints.

[@xbear7473]

@@jgetscensored7837 the difference is one piece being cut a bunch of times then welded together to form a bend then roll cages for example is like a bunch a separate pieces of round steel being welding together to make something which is very strong

[@atcJ]

That tube deserves better welds

[@EeryAudio]

That "pipe" looks a bit out of shape

[@rodgersb1248]

What?

[@lotrfam414]

@@rodgersb1248 they're implying pipe can only be round.

[@rodgersb1248]

@@lotrfam414 well that’s just not true lol

[@lotrfam414]

@@rodgersb1248 exactly.

[@kevinmahaley4916]

Square tubing *

[@gabtot5531]

Him: cutting the "pipe" Me: toblerone

[@liferunner6064]

Ah, yes. I've always wanted to learn how to make a 90.7 degree bend.

[@neprinadervogelweid1803]

A representation of my back over a gaming session.

[@huntkiller455]

А не проще купить трубогиб и через него прогнать профиль?🤔

[@user-su2py9mw9b]

Бывают такие углы которые не согрешит на трубогиб, например все те которые показаны на видео

[@michaelnieman6218]

That's not pipe it's square tubing

[@williepelzer384]

For the third time. It's rectangular tubing

[@ajbemrose8259]

Nah that’s not square tubing (the giveaway is that it’s not a square in profile)

[@williepelzer384]

That is not a pipe. It's tube

[@moses6248]

LMAO i came here to say the EXACT same thing lol glad I'm not the only one who knows

[@moses6248]

That's not a pipe lol pipes are round ya fool. Tubes, however, can be squared or rectangular in shape

[@whitehuayra]

Pipe implies something is hollow not that its round. Round pipes are round, but round isn't what pipe means. Tube is another term not THE term

[@TNTThemes]

@@whitehuayra It's not technically wrong, but pipe is not the proper term. I work in the chemical industry, and we use both in our plant. It's important to use the correct term for stuff like this to minimize confusion. With rectangular tubing, its not a big of a deal to call it pipe because rectangular pipe doesn't exist or is really really uncommon, so worst case you would probably just get corrected on the correct word. But if you mix up 1" round SS tubing with 1" SS pipe when ordering a part for example, you will end up with completely wrong dimensions.

[@moses6248]

@@whitehuayra okay, find me a rectangular pipe lmao you can Google rectangular pipe and it's gonna come up as tubing but okay buddy

[@FrozenThai]

I think pipe implies transportation. So a pipe is a closed shape(tube) that transports liquid, gas, etc. Or one can say they are piping something. While a tube is a more generic term for the shape.

[@rodgersb1248]

Work in the hvac field you’ll see square pipe almost everyday. So yea you’re wrong.

[@UltraMagaFan]

Instead of tacking it together do a decent weld.

[@UltraMagaFan]

@WungusBill That tube probably costs more than the tiny amount of welding wire and gas that would end up being wasted. If you’re going to do a demonstration like this stop being a lazy ass and actually show proper welding techniques. Chances are people might actually use this for something. They might think the tack welds are strong enough to hold it.

[@manuelgarcia-yn7rg]

@WungusBill then why bother doing the tac welds if it was “going to the trash bin after the video” 😐

[@tyr7876]

Fish eye welds…

[@AK-yy6yf]

Yep Mr. Million Tacks at it again

[@Hutchman05]

Glad someone said it

[@JourdenFabrication]

Ah yes the new type of welding that doesn’t have any light or flash….. 😂

[@theflannelguitarist2004]

For real I'm tired of seeing it, especially since some people start to think that it's the right way to weld. It's just exhausting, you know?

[@JourdenFabrication]

@@theflannelguitarist2004 totally agree I’ve had some guys come in to work that I have to train how to weld and that’s the way they do it and then get mad at me when it doesn’t work. (All welds we do are structural)

[@user-qh6yf9jl5c]

А одним куском вырезать любой угол не проще? Плюс острый наружный угол получается

[@valera1257]

Не неси чушь, этот метод выгоднее

[@user-qh6yf9jl5c]

@@valera1257 чем убитым временем

[@tatsuyashiba6931]

Know what? Im tired of these weld nerds that always comment about him editing the welding or only using point welds. 1- i prefer not to have my face blasted by bright light while watching a video 2 - he's not scamming anyone, you can clearly see it's edited even if you dont know how a welder works 3 - point welds can actually hold quite well. Plus, this is only a demonstration, if you want to do it, do the welds however you want. You guys focus all the time on the welds instead of the actual focus of the video

[@counterfeit6089]

The junk he makes is just as pointless and crap as his welding skills

[@shawnthye4716]

It's should be 90 120 150?

[@dustin600]

Never seen 1"× 2" pipe before

[@aaronwood3540]

If any of you knew how long it takes to do this, you would really appreciate it. A lot longer than 90 seconds.

[@Hellraiser14]

Shut up this is shit

[@spearotv587]

15 to 20mins

[@spearotv587]

If your good at it. Maybe 40 if it's your first time

[@aaronwood3540]

But most people see a 90 second video and thinks that all it takes.

[@mikeznel6048]

Why would you say this?

[@BuzzingGoober]

Or you could just, you know, bend the pipe?

[@craftingwithclay1255]

Square tubing tends to be more difficult to bend without crushing

[@MW-zy9qw]

The finished product is actually pretty cool looking

[@birdlady2725]

Cool! Thank you for sharing these.

[@philosophicalemoboi5862]

There are a lot of people commenting down here that have never worked in a shop before. You've got Pipe, HSS, and Tube. They aren't used interchangeably and are measured very differently when it comes to ID, OD, and Schedule. I'd wager that the piece shown here is a tube.

[@SorokinStanislav]

it's nice to look at the work of the master! 👍

[@cameronmm9872]

Watching that pipe bend was so satisfying.

[@theflannelguitarist2004]

Those welds be like 🐟👁️

[@chechein1026]

Espectacular.... Gracias 🤩💪👍

[@trentdickey3052]

I think the funniest things are how people think that Square tubing is pipe

[@The_Voluptuary]

Wouldn’t this be a tube rather than a pipe?

[@IsaKocoglu]

🙌

[@anthonyhenderson4661]

yep rectangular tubing

[@DamnDumbDuck]

Nifty. Just my two cents, show your math or at least give a simple explanation of how to do these pie cuts.

[@Lazybiker60]

Two words, Welders Handbook

[@mostafasamadi709]

Fantastic work

[@jappojappy]

My man must've been a master at geometry in school

[@gulashonu]

Question is; how is it you figure the angles etc.?

[@Machine_Ervin]

Nice work!Thx!

[@user-uj7so8eb5j]

good job 👏

[@memelord6356]

I love this look but my question is would it be worse or better then just welding to pipes at that same angle or would bending it like that be better

[@gregrupar135]

I can spot a harbor freight tool from a mile away

[@redeye118]

First time I've seen square pipe

[@DIYToPen]

Or box section. What's his protractor device though? Looks handy. I always struggle finding a tool to mark angles well

[@banann_ducc]

Best bendy straws on the planet

[@tomsullivan5663]

There’s an easier way to do that

[@johnty6067]

How

[@maxnovakovics2568]

@@johnty6067 probably miter joints but this way has it's uses

[@Monsterthatsunderyourbed]

Ah yes the comically large "Hold this L"

[@VincentRuckaRuc]

Bro im fat as fuck i clicked this video thinking the thumbnail was a toblerone bar.

[@davidball3081]

Let's get math out of schools..... duh. Let's keep math in schools!!! 🤪

[@peterfargo6044]

Don’t forget to account for the thickness of the blade.

[@Thecowboy1950]

Nice job 👍

[@Nope-ti4ec]

What tool is he using to measure and draw the lines?

[@thalaquatics8712]

A measuring line drawer

[@Segphalt]

90... I have serious doubts on that one.

[@kickpushlongboards]

Bust out the square!

[@kryptedcode]

Or you could just make 1 big cut and depending on how wide the cut is, you can make 30,60 or 90 bend

[@TotallyHandyShorts]

Nice point

[@vpictures9182]

Give me the link of that degree measuring scale

[@KoujiIsAmazing]

Since when are pipes not round?

[@user-qh9wc1ik1j]

Подскажите что за инструмент такой для вычисления углов

[@dennismustain3025]

Транспортир с линейкой

[@audistik1199]

In this case, the sum of the angles of the wedges cut out will equal the total bend. But since the inside angle you want is 30 degrees, the bend you put in the pipe is 180-30 degrees=150 degrees. Divide that by the number of wedges you want and you get the wedge angle. A wedge equals two angled cuts, so divide that by two to get the angle from the perpendicular on each half of the wedge.

[@bogey_master]

I’ve been running oil and gas pipeline for 15 years. Still haven’t ran into a square pipe, maybe soon!

[@BOB-wx3fq]

What would happen if you just put it in a tube bender without making those cuts? I've only bent round tubes before with dyes and a bender

[@Liquidpanda85884]

Forbidden Toblerone

[@nathanheim248]

Hot DAMN that was clean

[@ILIKEPARTYGIRLS]

What type of ruler is that?

[@unironicdoomer614]

I really ought to work on my cut off wheel technique. My cuts on that rectangular tube would’ve been so jagged.

[@willowwu8061]

Are we not gonna talk about those welds.

[@hosskatt-8317]

Magnificent.

[@KeithSkates]

My time + cutting disks + the welding supplies to do this costs WAY more than buying an elbow. 🤣

[@willianfajardo3455]

Muy buen trabajo quedó chévere

[@katuchilife5943]

Instructions unclear. I now p on my leg

[@davidlofton9820]

All the welders are losing their minds

[@arthurtmorgan4211]

So satisfying to watch

[@cdoutland]

I want to rap on this beat

[@chaselacroix4603]

For amount of time it takes to lay it out, cut it, weld it, and polish it, you'd be better off taking your material to a shop with a bender. They can take that tube and bend it in less than 5 mins for you

[@the_usual_icyasacocoair-ty5548]

Oddly satisfying... That is until it snaps after you spend your time and effort on it

[@WeirdoMan3000]

My head screaming: "Make a circle. GO ALL THE WAY!"

[@drwood-hi3gn]

*THE FORBIDDEN TOBLERONE*

[@norisvananderson9635]

Yep, that's pipe.

[@victorponce7238]

Hey you sir are highly skilled in your craft. You will do well in ur career. Keep up the good videos too. High five!! 👍

[@TheDeadRosewood]

I'd like to agree but as a certified welder he is more a novice he has much to learn like properly cutting and actually welding the metal instead of tacking it together that thing won't take any stress cause of those tack welds it's why I hate these tik tokers buying home welders and gear and not bothering to show how a actual weld looks like it's a bad thing to do and could lead to misinformation of the welding trade

[@toddbertram6556]

He even used the cutting wheel the way it is intended. Nice

[@ryanlynch3579]

But what's that thing mounted on it that goes around the blade? Never seen one if those before.

[@stevez2158]

@@ryanlynch3579 it’s the blade guard so you don’t get pieces of the wheel flying back and stabbing you if the wheel breaks. Actually really quite important to have one

[@Q_N-]

This ain’t a pipe. Google specified it. 🤷‍♂️ Pipes are cylindrical shapes. What you’ve got is a bent rectangle 😬

[@beefjuicer4808]

That was neat

[@MrJohnny18769]

Bro, I don’t even do this forma living. But I just can’t help but watch your videos. Very entertaining

[@Nicamist]

That reminds me I must go and get a Toblerone.

[@mikeznel6048]

Wouldn’t that first one, 30 degrees, actually be 20 degrees? 8 cuts of 20 degrees is 160 degrees and if you subtract 160 from 180, you get 20.

[@klchapman554]

You kinda answered your own question, it's a 160° bend since it's acute of 90°. No reason to subtract from 180.

[@Meeee1968]

I was thinking the same thing, and the last bend should be 100 degrees or 80 between sides. That is unless he changed the cut angles for the first and last cut. He would have to do 10 slots at +- 7.5 degrees (or 15 slots at +- 5 degrees to eliminate fractional angles) for the first one and 5 slots at +-9 degrees for the last one.

[@Scratch.gaming]

A bit loose with the word "Pipe". rectangular tubing would have been more appropriate

[@metalhedp8ntbll]

Wouldn’t they be 150 and 120 degree as they’re past the 90 degree bend?

[@981062sw]

Interior angles

[@josealejandro1609]

Eres mi héroe👍

[@mountain.sledder]

Looks more like square tubing than pipe to me 🤔

[@robertbaan7892]

Last one looks more like 88 degrees

[@lachlancampbell4238]

The ideal soup tube

[@chaseminatrea1866]

Guess I will be the only welder to tell you that's square tubing not a pipe SMH.

[@laryoung2949]

In case you didn't know it , that's not fukn pipe ..

[@wolfiemcwolf6617]

That's not pipe. It is RHS, and square stuff is SHS. Rectangular Hollow Section, and Square Hollow Section.

[@Julio-Cesar777]

Muy bueno, solo donde se consiguen esas máquinas soldadoras de hilo de metal???

[@fabiotiburzi]

Mig welding

[@crjr2013]

Hay muchas marcas no se de donde seas pero las puedes conseguir en Ebay te recomiendo Amico Power Mig esas son fabricadas al 80% yo tengo una no la cambio por nada

[@TobiasErnstsson]

Day 4, still waiting to see the pipe

[@Brutally_Honest0]

It’s a toblerone for the iron giant

[@jbjisawsome101]

Would have been nice to get the measurements for each angle instead of 3 of the same concept but thats probably on the full video

[@frannymak]

Each notch has 20° taken out so each bend is 180° - (the amount of notches × 20°) I'm pretty sure it's not a 90° bend or a 30° bend but the 60° might be correct.

[@jbjisawsome101]

Ahh makes more sense why he would cover it up I appreciate the info it helped alot

[@NLucifer]

First one is (180 - 20deg x8) = 20 deg

[@moshpitmachine]

Those fuckin welds though. It drives me nuts seeing shitty welds in a decent project

[@creepjax]

Fyi, cutting is a lot easier with a vertical band saw

[@JohnJames.]

More people have an angle grinder, fyi

[@JoseRodriguez-vu1tb]

Es muy bueno A qué distancia se trasan las líneas Gracias

[@umbertold]

Man. Seriously. This way of bending looks interesting, but there's so much pain. It's waaay easier just to heat it enough and bend. 5 minutes maximum.

[@seanfaraday6369]

That pipe looks alot like tubing. Do my eyes deceive me?

[@_rorshack__]

Math is so cool I wish i put more time into learning

[@lolxd1180]

There are still areas that water can leak, still it could work with something other than water

[@enelanonimato6704]

The hard way to make a bunch of structurally superfluous tubes

[@ourtube4266]

Or you could just buy an elbow fitting that gets you less minor losses, costs less and takes seconds to instal.