CV slide installation lift trick: HOW TO VERIFY CARBURETOR SLIDE LIFT OPERATION

[@hlpang1075]

Never knew this trick. Whenever putting the diaphragm back I tried to be very careful but could never be 100% sure it was properly seated. This is an awesome way to test!

[@SOLOMOTOUK]

It’s been a very long time since I first watched you and the advice is absolutely fantastic I always come back to use your very expertise videos as a reference just like to say a big thank you from Derek Great Britain and United Kingdom 🇬🇧

[@How2Wrench]

So glad to have you!!!!!!!! We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Jenny Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@niconine268]

That's such a boss tip & method to check viability of slide installation checking if diaphragm & spring are correctly seated. As you said, big bonus to have had these 2 carbs in order to see these differences. Thankyou

[@How2Wrench]

Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@benholden4585]

Dang, that's the best explanation and tip I've seen. I've cleaned a lot of mower carbs, but this is the first CV Carburetor. Thanks!

[@How2Wrench]

We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Want even more? Join the channel. And you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@gregr1672]

You really hit some good issues with your students ! So many dealerships have parts changers representing as mechanics ! You are one hell of a teacher . I ve learned tons watching your videos! I just took apart a mikuni CV carb on a Polaris . Didn't know a dealer had supposedly rebuilt it . Well I cleaned and reassembled it and my slide lifts and drops ,but it drops fast ! The bike starts right up and runs but not well . When I give it full throttle the slide is not lifting. I am thinking I have something askew inside or possibly installed slide backwards . I've heard its possible to do . I am gonna try your trick blowing some air into carb. I was going to take it off again but I think I am going to try your trick first since its exposed! Thanks for your videos .

[@How2Wrench]

Thank you Greg! Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@bve7397]

I was struggling all night thinking it had to snap, not have a bit of a slow descent.. man 😂

[@gregr1672]

I tried your trick this afternoon! Blew air into carb ,no lift! Also I didn't have any suction sound when I lifted the slide by hand. Disassembled the carb and flipped the slide over . I had smooth side of slide facing toward intake and the side with 2 small round impressions on it facing air box! Reassembled carefully with smooth side facing air box and side with the impressions facing intake ! Suction sound was clearly heard when lifting slide . I blew air in with compressor and slide raised proportionately to amount of air I applied ! Quad is running great now and I have a CV Style Kiehn on my 87 FXR now so this was a good lesson learned .

[@How2Wrench]

Cool! Show us some love back? We sure could use the support! Ever bit helps keep our doors open! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@eddybearall]

My bike had tipped I redid my carbs & fuel still got into airbox & oil 😱 then I watched this video & payed attention to what to watch for under the diaphragm .so with carbs in place ,I just took the tops off & made sure that the plastic piece above the needle was seated correctly & OMG no more fuel passing to air box. That little bit of a raise with the needle did it. Now an oil flush run it & new oil & life is good. Thank-You for this educated video sir 😊❤️🇨🇦

[@How2Wrench]

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@dylansanders2363]

This helps me so much I can’t hardly find any videos on this this explains very well

[@How2Wrench]

Thank you for commenting. Want more benefits? -Live Live chats -Video request links -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@owenray2709]

This dude is a good teacher

[@How2Wrench]

Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@williamstanford9276]

Thanks for the awesome video. I just rebuilt my dual carbs on my VT600 Shadow, fortunately I knew about installing the diaphragm with the slide elevated, but I’m prone to worry so I was thrilled to be able to test it out before I put them back on the bike!!

[@How2Wrench]

Glad it helped! We sure love you taking the time to comment. Are you coming to the next live session? There a few ways you could help keep this work going and stay connected with me personally. 1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know! 2. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin 3. Give us a high 5 here: www.paypal.me/how2wrench Keep Wrenching, Shane Conley Peoria, AZ USA Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/

[@44lespumas]

Just come across this. Looking for some help with my CVKs. Not my Harley but on a Kawa 1000. Just rebuilt the whole ramp and one of the sliders was not making that sucking sound as I lifted it up. And yes, I had pinched the top of it. So thanks a lot. They're running sooo much better.

[@How2Wrench]

We love comments from people like you! Please hit that subscribe button for us! 👍 Subscribers get a free video for them to search the channel for topics! Reply back you subbed and I’ll share the link! Thank you for taking the time to comment! It helps us! Did you know there are over 700 videos on here. We even made a quick video of how to best search the channel for you. Here are two links to best serve you on our channel: Channel Search: (subscribe to get and let us know!) All Playlists: kzbin.infoplaylists Please say thanks and “high five us here: www.paypal.me/how2wrench Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@doctordapp]

Thanks for the tip. Will check it out tomorrow. My engine runs and revs, but after 20-30 seconds the engine stalls. After waiting a minute it does the same.

[@How2Wrench]

Glad it helped. We will let Shane know! You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@harryzampetakis7279]

Very helpful! Going to rebuild my Mikunis soon.. Nice way to check them! Many thanks

[@How2Wrench]

Thank you. Hit that subscribe button please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@44lespumas]

Don't think it will work on your Mikuni. Mikunis are flat slide carbs. Not depression. They do not work at all the same way. The throttle will pull up the slide on the Mikuni and squirt gas in. There are other KZbin channels where you see the difference.

[@harryzampetakis7279]

@@44lespumasfor my FZR 750 88 carburetor, round slides, worked perfectly! Checked! And the bike works absolutely fine. Possibly there are other types too.

[@flyurway]

I have learned 2 things now since first watching this. First, you can just blow a small amount of air from about 6" away to make this work, that way you're not blasting a ton of air into the diaphragm. 2nd, I was having a hard time getting the cover on the carbs properly because those diaphragms just wouldn't cooperate, like you needed 4 hands. I found using one hand to hold the slide up about 3/4 of the way (or putting an object into the throat to hold it up) made it very easy to get that diaphragm seated so you can get the cover on. Worked every time.

[@How2Wrench]

You mean like this: kzbin.info/www/bejne/mabJc35tatqMmsk 😊 We sure love you taking the time to comment. Want to help us back? Please subscribe and give us a high 5 here: www.paypal.me/how2wrench Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/

[@flyurway]

@@How2Wrench Now I need a video showing how to get those damn Dynojet "airflow correctors" out of my carbs! They have you press these tiny things into that small port with Loktite and my bike has never been ridable since!!

[@How2Wrench]

@@flyurway and you still haven't subbed...

[@waltermullins8854]

That was spectacular, and thanks for sharing the test trick with the world! Now I can better troubleshoot my own :P

[@johnblackwood5308]

Cool video! My bike is in the shop right now with the exact same problem.

[@How2Wrench]

Did it work? Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@Origo12345]

You´er the man!!!! that helped a lot

[@How2Wrench]

We sure love you taking the time to comment. Are you coming to the next live session? There a few ways you could help keep this work going and stay connected with me personally. 1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know! 2. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin 3. Give us a high 5 here: www.paypal.me/how2wrench Keep Wrenching, Shane Conley Peoria, AZ USA Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/

[@flyurway]

Thanks! Never had a problem with these before but today own my ZX-11 I had 3 not working ... wtf? And 2 are still fighting me, not my day I guess but this trick will help!

[@keveshannaidoo5670]

Does it affect the starting of the bike as well

[@AMentorway4u]

Awesome. Nice job

[@How2Wrench]

👍 Thank you for taking the time to comment! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@rraamuco]

Great info thanks

[@Craneman4100w]

Just question on how high the air pressure was for your test Shane.

[@davidpalmer287]

Great video. Very helpful trick thanks for sharing

[@How2Wrench]

No problem! We love comments from people like you! Please hit that subscribe button for us! 👍 Subscribers get a free video for them to search the channel for topics! Reply back you subbed and I’ll share the link! Thank you for taking the time to comment! It helps us! Did you know there are over 700 videos on here. We even made a quick video of how to best search the channel for you. Here are two links to best serve you on our channel: Channel Search: (subscribe to get and let us know!) All Playlists: kzbin.infoplaylists Please say thanks and “high five us here: www.paypal.me/how2wrench Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@davidpalmer287]

@@How2Wrench I've been subbed for awhile. I've Learned a lot of valuable information from this channel. Thanks again

[@How2Wrench]

@@davidpalmer287 Sweet thanks for subbing. It doesn’t always show if people’s privacy settings don’t allow. Kinda sucks as we always reply back to comments that show as subs first. Forgive us if you ever see us requesting you to sub…😁 Here’s your H2W channel search link: kzbin.info/www/bejne/pXLIia1no8lgm7M You can always give us a high 5 here: www.paypal.me/how2wrench

[@eddybearall]

I have a timely question Please & Thank-You . The plastic octopus that stirs over the needle,you showed to not have plastic ridges rest on ridges inside under diaphragm. Now if ridge on ridge could it elevate the needle enough to allow fuel to pass through into the airbox overflow. Thank-You 🇨🇦

[@How2Wrench]

It sounds like you’re ready for some Techline help. Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@greenmountianboy8457]

Great video thanks

[@vaguincolombia]

thank you so much Mr. Shane for the tip, saludos

[@GoatMadridYT]

Thank you for video great way to test

[@How2Wrench]

Glad you liked it! 👍 Thank you for taking the time to comment! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@trenthitchcock5109]

Do you need the vacuum system for these carbs? I've got a chopper with no vacuum lines or anything, does that affect these carbs?

[@drewkastelic6154]

Thank you. I am building a XS650 chopper and recently it has been loosing low end power. I'm thinking 1 or more of the floats are not working right. This is what I am going to check.

[@How2Wrench]

Glad I could help. Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists! Even more training and deep dives if ever needed… Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@gregorycam66]

great video, thanks. I have a prob with my carb off a Honda_XR650l. my slide/diaphragm makes the "correct" sound going up and down, but when I test it with compressed air, the slide only goes up part way. HELP!

[@How2Wrench]

We have a techline service on the website! Thank you for commenting. Could you spare $2 and support us with even more benefits? Would you consider helping support our work here and help keep us going? We can’t thank you enough for helping us keep making technician training impacting schools all over the world. Smash the subscribe button and bell! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@GearoidOCallaghan-z8k]

Is that a Marauder? Ive a strange issue with a gz250. Had no spark, replaced with another cdi as original died. Have nice strong spark, fuel is getting to the cylinders, has air and carbs have been rebuilt but wont turn over. Trying to use quickstart it will eventually sputter and leave out an unmerciful bang. Im at my wits end, its like the spark timing is off but theres no adjustment for these bikes that i can see? I really want to save this bike from being chopped up because would be a great starter for someone learning to ride! TIA 😊

[@How2Wrench]

Hopefully the community here will chime in, if not that's a great question for Shane directly! He offers 1:1 training. I'm not sure on specific videos. We are just the call center. We just run the social media.....Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Note: If you are a channel member please reply back with your KZbin handle. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up! Keep Wrenching, Jenny

[@elonmust7470]

Why would a 150cc gy6 engine die from WOT & begin dumping fuel through the overflow? Circuts seem clear.

[@adambeierschmitt4877]

Will this cause a rough idle and make the bike run rich if there is a small hole or tear in the seal?

[@How2Wrench]

Hello Adam...first off it cannot reused. Next the answer is tough to tell as there are two things going on when a tear prevents the slide from lifting as designed. 1. The center slide prevents correct (enough air or restricks) from going through the carb and also reduces fuel being lifted up the too. So this alone causes a rich and lean theory. 2. The needle is not lifted form the center needle jet hole and restricts fuel. So what I always do when chasing a rich or lean condition is to make everything as right as possible first (hence replace the torn slide or any off-nominal conditions) then re test drive to see what state the mixture is in with all known things present. 👍 Thank you for taking the time to comment! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Subscribe and Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@212Tan]

This is good trick but does not always work! I my case today I discovered a fine pin hole and it actually function properly until installed on bike! It would make hiss sound and drop slowly. It also gave me a lean condition on that cylinder

[@How2Wrench]

Thanks for sharing Tanner. We appreciate good quality comments that help others too. 👍 Thank you for taking the time to comment! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

[@stwhite5135]

I have a 95 Sportster and the slide isn't going up. No suction sound when I push it up. Thanks. Been sitting for about 6 months. Guess the diaphragm is old and cracked. I now know what to look for. Subscribed

[@karlleonardcapio5484]

Do you have a video for vacuum pump works.. Like keihin carb

[@How2Wrench]

Hey there. I'm not sure with out more details and would hate to waste your time. That's a good question for Shane in his member group. He sends videos links or chats directly with you as a member. Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

[@bikerworld4712]

My mikuni 34bs carburettor slide goes up, but on way down pauses half way. Not sure how to go about fixing it. When I swap a different slide, it goes down with gravity but 2x slides out of 4 seem to be rubbing along the bore. Could it be that it needs fine gritting? The bike was a restored after 6 years stopped. Has been running and has done 5k miles but giving running issues therefore I am here at it

[@How2Wrench]

That's a good question for Shane directly. You reached the social media team here. We get 300-400 requests a week, so it’s a bit time challenging as you can imagine. Shane does try to answer some non-members' questions when he gets some time so hang tight if you’re not in a hurry. Did you know one of the member benefits is to ask for which videos would work for your needs and get daily "quicks answers" to questions directly from Shane?. Best $1.99 a month you'd spend...of course enjoy the over 700 free videos and access the the member only vids with all the other benefits listed below. There are two immediate options that can get you a solution within 24 hours and quite often within the day. Option 1: Consider joining...best $1.99 you'll spend this month 😁 This is great for quick answers. He literally logs in and answers member questions daily! He does an AM and PM check-in to answer all member questions. Join this channel to get access to the perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Option 2: If you need help sooner choose his 1:1 option! What you get is a deep dive one-on-one with him. Use video, email, and phone support. He will drop his tools and work with you directly! Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@gordonwbell]

Great information, I just came across this video and your channel. I have a question about my 2001 Yamaha Raptor 660 single cylinder with dual Mikuni BSR33 carbs. I rebuilt and cleaned them thoroughly as they sat for many years and were very nasty. I inspected the diaphragms - they’re in good shape and they both operate smoothly, and make the suction sound that you demonstrate, but when I run my engine and blip the throttle only one slide seems to operate, and the other stays mostly closed. I know that the RH (looking from top and forward) carb only leads to one valve with a small connecting channel to the other valves, and the LH carb goes predominantly to the other two valves. It’s a 5 valve head. What would cause this? Is this a load issue? Or is it simply because the air stream velocity for the RH carb is much greater due to feeding two intake valves? I have a video I made that I can share if you want. Thanks in advance.

[@How2Wrench]

Hi KG...sooooooo many requests just can't hit them all. We have a member (join) button now so the comments bypass all and hit me first...It's been years since I did Raptor carbs and recall something differenent about them. I'd have to grab a manual and look into so I don't guess... We sure love you taking the time to comment. Are you coming to the next live session? The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Want to help us back? Please subscribe and give us a high 5 here: www.paypal.me/how2wrench Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/

[@robertryan8178]

Hi i got a 883r sportser it appears my slide not going up and down when using accelerator

[@How2Wrench]

That's a good question for Shane directly. Have you considered joining the channel to get him daily as a member benefit? You reached the social media team here. We get 300-400 requests a week, so it’s a bit time challenging as you can imagine. Shane does try to answer some non-members' questions when he gets some time so hang tight if you’re not in a hurry. Did you know one of the member benefits is to ask for which videos would work for your needs and get daily "quicks answers" to questions directly from Shane?. Best $1.99 a month you'd spend...of course enjoy the over 700 free videos and access the the member only vids with all the other benefits listed below. There are two immediate options that can get you a solution within 24 hours and quite often within the day. Option 1: Consider joining...best $1.99 you'll spend this month 😁 This is great for quick answers. He literally logs in and answers member questions daily! He does an AM and PM check-in to answer all member questions. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@rickrodrigues2219]

I have a '83 Suzuki GS750E & it's in mint condition but it has major running problems...worse than COVID!!! Hard starts, runs erratic & would not throttle up!!! The bike has good compression on all 4 cylinders. I've checked the ignition system - Ok. Removed the 4 carbs (stack) & installed new carb kits & adjusted the floats. Just to let you know it is not a simple job on this bike but I'm embarrassed to admit I did this 4 times with no success!!! Even checked the slides & all 4 work just like in your video (the vacuum effect). What I noticed while the engine struggles to run is that the #2 & #3 cylinders are running cold @~ 110F while #1 & #4 are @~275F+. I swapped out the ignition coils & spark plugs with same results as above! #2 & #3 seemed fu*ked!!!! I've run out of ideas & just about had it with this bike!!! Any ideas before I take it to the wreckers???

[@How2Wrench]

DON'T JUNK IT...sync up the Shane directly! He offers 1:1 with you. Link below. Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@raylenealexander9519]

If it's not on properly, does it flutter when driving?

[@How2Wrench]

That’s a great question for Shane directly! We are just the social media team. He is overseas training techs until the 19th but is trying to schedule time each day to answer techline orders still. Shane has a solution for you. As far as the question, Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily! He is just returning from an extended stay in Japan training students this winter. You can imagine how full his inbox is. We put orders are to the front of the line. The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt

[@lylecousle]

My question is, how to fix this types of problems? I mean, what possible solution you can create to fix this types of problem

[@How2Wrench]

Good question. I'd like to answer deeper than yes or no. Can you sub and I'll circle back? It really helps us creators grow. Appreciate you! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin You can always give us a high 5 here: www.paypal.me/how2wrench

[@lylecousle]

Done, i would like to have deeper knowledge about these type of problem

[@How2Wrench]

@@lylecousle Most answers are found in this video: kzbin.info/www/bejne/mabJc35tatqMmsk We have many videos with solutions in this playlist: Fuel, air, intake: kzbin.info/aero/PLAtBOuPaEyt-ZMVRlpvWmVFLL10P16vWf We also do monthly live q&a (join the channel for access: kzbin.info/www/bejne/r5_HlHyngN6SgKc) We sure love you taking the time to comment. Are you coming to the next live session? The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Want to help us back? Please subscribe and give us a high 5 here: www.paypal.me/how2wrench Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/

[@jordananderson8299]

Video still not clear. I have a go kart with a GY6 scooter engine with a CV style carburetor it ran fine for weeks. today I went to start it it will idle but will die as soon as I hit the gas. I can see that the diaphragm slide won't move. Checked the seating and even blew air into it to verify it moved. That didn't help

[@How2Wrench]

Sorry we are just making it down the list of comments. We get hundreds per week. If you ever need immediate help you can get Shane's cell below. Thanks! Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

[@jordancouch8371]

I'm cleaning the carbs on my kawasaki zx9r as i watch this

[@How2Wrench]

Thanks for commenting and adding value to our community! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzbin.infoplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com

[@keveshannaidoo5670]

Does this also affect starting

[@jordancouch8371]

@@keveshannaidoo5670 yes it can affect how it starts