How to spot fix carbon fiber damage In easy steps no spraying

Рет қаралды 25,036

Күн бұрын

Пікірлер: 50

@drrock5356 7 ай бұрын

Great method! However if the chip goes all the way down to the carbon fibers, you must build the chip back up, and flush with the surface using a 2K (2 part) clear coat (or use 5 minute epoxy if you want it to turn yellow and crack!). If the sandpaper and water have black in them, you've hit the fibers, and there's no more clear coat to polish. If too deep, then pick away at the chip to remove all of the cracked clear coat. Don't spray the clear coat, just dab or wipe small layers into the chip, let it flash, build a layer, flash, until it builds above the surface. THEN progressive sand and polish.

@cocoblue9 7 ай бұрын

would a spray 2k clear coat work? or does it have to be liquid?

@JR-nh4fi 4 ай бұрын

Is that same process for paint? So i can use the 2k can and spray on an applicator?

@martinbujnak7266 9 ай бұрын

Please which paste is used at the end? Thank you.

@richardseem7948 8 ай бұрын

Awesome video and content. Let the haters and trolls find something wrong on that.people fail 2 understand you channel and dont listen when you say this is better than b4 and we aren't a bodyshop

@rndm_m4 8 ай бұрын

Do you need to apply a layer of clear coat since u sand it? Or u can just wax it and done?

@dR0Og Жыл бұрын

How do you prevent moisture ingress now you have sanded off the protective gel coat? CRP will absorb moisture and start to degrade if it is not sealed.

@cvrpov Жыл бұрын

Quick fix this is. Coat with 2k clear or maybe a ceramic

@JR-nh4fi 4 ай бұрын

@@cvrpovdo you sand the 2k after?

@davidchapman43 2 жыл бұрын

Amazing work mate.

@cvrpov 2 жыл бұрын

Thanks

@randomtherapy 2 жыл бұрын

You make this look so easy.

@cvrpov 2 жыл бұрын

Sorry

@randomtherapy 2 жыл бұрын

@@cvrpov accepted 🤣🤣🤣🤣🥃🥃

@JamalHossain 2 жыл бұрын

Another brilliant video. Keep it up.

@cvrpov 2 жыл бұрын

Cheers

@mcdonamw 5 ай бұрын

I have two big spots peeling on my cf mirror. I'm terrified to attempt this!

@richardseem7948 8 ай бұрын

Wow fantastic job

@redding4540 Жыл бұрын

how do you know when to switch sanding grits? I don't wanna over sand

@cvrpov Жыл бұрын

Each grit of sanding is to remove the previous grit marks.. so as much as in necessary but without damaging the clearcoat

@mreightytwenty8709 2 жыл бұрын

Hi can you help. Do you do many bonnets, mobile out in the weathers. I have been doing a few but thinking of not doing them any more, they are a pain, what with dealing with the weather color matching the side fenders etc....Your thought's please...

@cvrpov 2 жыл бұрын

I rarely do a bonnet outside mate. It's difficult to not have bits land in/on it. Also drying the panel is difficult

@mreightytwenty8709 2 жыл бұрын

@@cvrpov Thanks for that..i thought so. I now have stopped doing bonnets oiutside. Cheers

@johnmarbalanag Жыл бұрын

Is this work to apr wing? Since i have a small spot to i wanna try it

@cvrpov Жыл бұрын

Yes it should

@enriketto07 2 жыл бұрын

Nice done, as always!

@cvrpov 2 жыл бұрын

No probs

@zephyrgaming9642 Жыл бұрын

Can it be as easy if it’s on an edge? I have a m4 with a carbon roof but a rock hit the edge so it penetrated the clear coat

@cvrpov Жыл бұрын

Just need to go steady and take ur time

@cn9tkenchi511 Жыл бұрын

Hey, if i was to apply clear coat to what you done, would i needa sand the whole mirror or can i just do what you have done and sprayed the clear coat after sanding that section? Thank you!

@cvrpov Жыл бұрын

You may aswell scotch/key up the whole area and spray clear

@kianward5999 2 жыл бұрын

OMG that is just outstanding content what a great vid bro you are just stunning at what you do bro amazing finnish great channel keep up the great content love it

@cvrpov 2 жыл бұрын

Always love the support matr

@piroozhr7968 2 жыл бұрын

So no need to respray clear? It seemed as it fully chipped in that spot...

@xmo552 2 жыл бұрын

I wouldn't want this repair. He just buffed the carbon fiber and now the clear is even thinner.

@cvrpov 2 жыл бұрын

U can do if u have the option to

@hhaste Жыл бұрын

Yes, you do.. this is only half of the fix

@WeI3I3y Жыл бұрын

This is the way except for adding 2k to seal everything, otherwise it just comes back again. I've done this multiple times to my mirrors but didn't use 2k and it just kept coming back quickly. Do your self a favor and finish it off with 2k to seal the deal. See what I did there...