Fix your Polished Face Rims and Diamond cut at home with a scotch pad!

Awesome technique to repair and refurbish your polished face and diamond cut alloys back to looking like new again! step by step easy to follow guide!
For Kits to do this yourself!!! Check out www.paintgear.co.uk !!! Pre packaged kits to save you time, hassle and money!!! No more searching around the internet looking for things and ordering the wrong stuff and more of it than you will use £££. Tailor made kits for DIY Diamond cutting and Polished Face Repair!!
PaintGear Rotary Repair Kit For Diamond Cut Alloys
www.paintgear.co.uk/collectio...
Amazon Links to the products used
*******PRODUCT LINKS AS SEEN IN THE VIDEO*******
Variable speed Rotary Polisher: amzn.to/3BkRO3t
M14 Thread Backing Plate: amzn.to/2UWMS5f
Sanding Discs: amzn.to/3zFwuW9
2k Clearcoat Aerosol (Lacquer): amzn.to/3Dv0KVJ
High Build Primer: amzn.to/2WrYwGf
This will be the last in the series of Diamond cut and alloy repair videos. In this video I simplify the process and try and keep it as DIY as possible to still achieve pro results!
Sending your wheels away and having them Re Diamond cut is very expensive and you will loose your vehicle for several days.
To anyone who does bodywork and Smart Repair, who would like to advance into wheels... these are a very popular service to offer your clients.
Using a Rotary Polisher, 180, 320 and 400 grit sanding discs, removing the old finish. This is shown in a simple way in the video.
In the Video I offer two options. Option 1 is to do some wet sanding to refine and then polish as a finishing stage. This offers a very mirror like, polished look to the wheel face.
Option 2 shows that after the 400 grit stage, a piece of dry scotch pad can be added to the backing plate to recreate that Polished Face Factory look!
I hope this video helps. Please hit subscribe and leave a comment!
Thanks, CVR POV

[@drag0n77]

Awesome video! I recently bought a Qashqai runaround (13yrs old) and the alloys were the worst I've ever seen, they were a mess, even the refurb guy pulled a face. I was quoted over £450 for refurb and spray but as the car is a cheap run around that seemed like a waste of money. Bought the pack from paintgear and gave this a go last week on the two front wheels. They don't look as good as this vid but I am so pleased with them!

[@popeye9048]

Absolutely superb, sir! I've just bought a set of wheels with lacquer peel on every one of them but wanted to keep the oem look rather than just having them powder coated. This gives me the insight and push to get it done myself now. Subscribed 👍🏻

[@GhostofCTC]

Great video mate! Amazing Finnish. Never realised it was so straight forward. Very tempted to try refurbing my own wheels now.

[@joshlindemeier2434]

Thank you…one did the BEST DIY reconditioning videos I have found…i appreciate the different methods explained AND demonstrated! Well done sir 👌

[@cvrpov]

Kind words josh.. appreciated pal

[@JeffDublinIreland1968]

in fairness mate this has been the most informative and easy to follow video i have seen. well done and thank you.

[@BradOnCars]

Fantastic thank you for showing us DYIers how to do this! And best of luck with the channel! -Brad

[@cvrpov]

Thats what its all about. Thanks

[@jonog4207]

Thats probably the best "diy" finish on youtube

[@cvrpov]

Thanks for the feedback

[@delveer]

Would never have attempted this myself but gave it a go after watching your videos and so glad I did! Having never done anything like this I can confirm I’m very pleased with the results, maybe not a professional finish but you’d only notice there was damage corrected if told where it was. Keep the videos coming!

[@cvrpov]

Awesome del.

[@meldonte88]

I never, ever comment on youtube vids but i just wanted to thank you. After receiving a ridiculously high quote to refurb my 997 turbo alloys , these videos gave me the confidence to have a go myself and the results are fantastic 😍.

[@cvrpov]

Awesome mate glad you like the channel

[@user-nf3uf8wh6u]

What a brilliant job mate. They look as good as new. Very impressed.

[@topiqchill241]

Thank you for these videos I have a KZbin and I’m doing a budget build. I was thinking about sending my wheels to a near by paint shop. You have inspired me to do a wheel restoration on my diamond cut Starr wheels myself. I’ve taken notes and I’m going to purchase some tools. Thanks for the motivation and inspiration.💯💯

[@cvrpov]

Good to hear mate glad they have helped

[@paullevers1095]

That is great to be inspired by what other people do. I am about to buy a car with diamond cut wheels and they all have varying amounts of damage. The dealer said that he can get them done for me but after watching this video I too am inspired to give it a go. It's a great excuse to buy some more tools too 🤔😁👍

[@and82rei]

This is a perfect alternative for those wheels that cannot be cut anymore. Well done mate, great video!

[@cvrpov]

Yes it is exactly that. Thanks for watching

[@calebromero4942]

Going to attempt this on some Nogaro GTI wheels I bought which have some ugly curb rash. This video helped prepare me greatly, and other CVR videos have supported what I learned from this video. Thanks mate, keep it up!

[@cvrpov]

Hi Caleb, good stuff man, thats what its all about

[@calebromero4942]

@@cvrpov Update - It turned out well. I found that a 400 grit disc Diablo SandNet worked well to give the OEM look. Moving up the grits of paper and then going to a compound didn't quite turn out as I hoped and exposed small flaws. I preferred the OEM style look. Moving from the center towards the edges of the wheel and using only the edge of the disc helped keep the lines slightly curved, but not swirls. It was a bit tricky to do with my wheels, as the individual spokes are a bit intricate and not quite "flat". They slightly angled inwards or outwards which made it difficult at first. However, I would definitely recommend this method to anyone looking to save a buck or two and spend a day on some DIY wheel repair. Rattle can was a flop, and I had to remove it after my failed application - so I had a professional 2k clear coat it for me to ensure a proper finish and protection. Thanks for the inspiration, I'll likely complete the project with the other wheels that are a bit damaged as well.

[@garyeccleston6789]

I've been a detailer for over 30yrs and i have done so many wheels pretty much the same way yes it does take a while to do and you need a lot of patience but the end result is worth it.... Excellent job by the way

[@cvrpov]

Nice one Gary

[@WalterNut99]

And do you apply the clear coat directly in the polish aluminium????

[@garyeccleston6789]

@@WalterNut99 no as it won't stick get the wheels the way you want it then lightly key them up and laquor

[@WalterNut99]

@@garyeccleston6789 could you explain me in a way i could understand ?? Sorry Mate im from Spain i dont know whats key Up si hahahahah i mean that when you grift them all to finish stage, before you apply the clear coat for máximum atach to the surface you should apply some wash primer or something so the clear coat (bit) better to the surface

[@garyeccleston6789]

@@WalterNut99 when you have polished the wheels get some 2000 grit wet and dry sandpaper and evenly sand the wheels until there is no shine clean wheels and spray with laquor

[@justincredible4468]

best video on the tube about making it look like factory or better! thanks for the knowledge.

[@cvrpov]

Thanks for watching an commenting mate 👍🏼

[@peterbalac1915]

@@cvrpov Haven't got time to watch it now after a few words I've saved it to my list, busy painting the steel wheels on my trailer but my Navara wheels are like a spider has been behind the lacquer so yr video will give me the confidence to attack them. Chrs bud much appreciated 🤙

[@glyflex]

I thought it could be done like that but the ‘PROFESSIONALS’ claim diamond cut can’t be re finished! I would re cut with the back edge of the disc or work on the spoke opposite me as the original CNC marks run with the circumference of the wheel. Excellent work!

[@gwadaflat]

Hi , Excellent work, very beautiful final rendering, very professional! Looks like 18 inch Vw rims! I have the same on my Vw Passat B6 variant !

[@cvrpov]

Nice one mate thanks for watching

[@matthewmaidment8464]

Great Video, i have these exact wheels for my touran, they are chicago 18" and need a refurb so will be using your method in this video

[@cvrpov]

Good luck mate

[@DJ-kb3pl]

Thank you for this very helpful and cost saving video👊🏾💯

[@cvrpov]

No problem my man

[@richardtomlinson9123]

Fantastic finish, made it look easy 👏

[@cvrpov]

Thanks

[@abagnalejr123]

Great vid, thanks! Tip: if you work from the centre of the wheel OUTWARDS with the scotch on your polisher, it replicates the factory diamond finish, as the wheels are turned on a lathe working from the centre outwards at the factory.

[@cvrpov]

Thanks for the tip

[@HowtoMakeThings]

You mean work inwards. Not forgetting that in this instance the sander is orbital so as you move it outwards yes you’ll replicate a diamond cut but then you’ll make a U shape on the outward stroke. Unless you tilt the sander. By moving inwards the last part on the sander replicates the diamond cut.

[@Phettraining86]

I didn’t what this finish was called. Search everywhere! My diamond face on my new rims were painted over with stupid silver paint. Now I have to do this method. Thank you

[@chrise202]

Great work! Amazing result!

[@cvrpov]

Thankyou

[@ultraglossdetailing786]

Loving the videos mate 👍🏼 definitely would try this after watching this.

[@cvrpov]

Good stuff 👍🏼

[@mohammedsabeel50]

@@cvrpov hi mate just bought a set of monza alloys for mk5 gti although originally diamond cut someone decided to spray gloss black, poor spray job which grit can I use to remove the the paint, so I can restore them

[@Choober65]

Better than factory IMHO. TOP job Brother.

[@Silent_Panda]

great vid man.. its because of your tips in some of your older videos i was able to redo my rims myself, only thing i didnt polish and use the scotch pad.. which i wish i should have.. thanks for the help.. keep up the good wrk

[@cvrpov]

nice one mate thanks for watching, glad it has helped!

[@Markstevos]

Nice one, looks spot on that!

[@cvrpov]

No problem

[@999Joseph]

In of the middle of doing mine currently thank you for the video

[@PhilKing-n8v]

Definitely have a go, great video thanks

[@kidda74]

Awesome cheers! Small bit of advice, if possible always use DTM (direct to metal) 2K lacquer so it etches to the metal else it won't last as long.👍

[@floresj183]

Wow!!! Amazing work!!! 💪💪💪💪

[@cvrpov]

Thankyou

[@ZippyPenguinTribute]

Wicked content, got 4 diamond cut wheels with corrosion on them and what like to keep the oem finish, will give this a bash.

[@cvrpov]

No problem. www.paintgear.co.uk I've made a diamond cutting kit to do these

[@stevecooper6069]

Excellent video, well done !

[@cvrpov]

Many thanks!

[@LeirStratus]

Awesome vid thanks! nice work

[@mrt-gt]

Great video. The only thing I would do differently is to use the electric sander with only the pad side/ radius facing the outside of the wheel touching the wheel when creating the diamond cut effect. Reason for this is that the diamond cut/ arc effect of the pad will match the round arc/rotation of the wheel. You will notice that after polishing with the dry scotch pad with only the side/ radius facing the inside of the wheel touching the wheel (16:56) the diamond cut/ arc effect is in the reverse/ opposite arc to the round arc/rotation of the wheel. Hard to explain, but look at the arc of the scratches at (16:56) and it should make more sense

[@cvrpov]

Yep fair point mate

[@johnconnolly196]

Great content very useful video, maybe you could make a turntable for the wheel with a old hub, then spin the wheel and hold the scotchpad moving from centre to outside rim would give you a perfect finish, ,

[@jrvd64]

Would it be a good idea to mask the black paint in this example to prevent the dry scotch pad from scratching the paint when rotating to make the diamond effect?

[@davidpp9999]

Great job and great video!

[@cvrpov]

Thank you!

[@sonicmiranda10]

Great vid. Thank you!

[@rimantas1975]

thank you . Looks fantastic

[@arfurdaley6399]

AMAZING JOB !!

[@cvrpov]

Thankyou

[@deveshb]

Simply Amazing 🤩

[@cvrpov]

Thanks

[@stevepellew8021]

Top job Kev 👏 love the look of the Ford focus 👌... Given me some ideas on the 2006 Nissan wingroad rims... $100 in materials $25 a rim...😮.

[@cvrpov]

Not sure who your talking to but best of luck to you

[@iansmotor-world9174]

I do these wheels as my job daily The oem clear coat removed is clear Powerder coat ! Tend to use same process scotch - -180-320-500 finishing DA - 800-3000 wet ! As for clear coat I use 2k Etch clear as standard 2k clear can get washed off or flake over time as doesn’t key into bare metal surface !

[@nathancarruthers8073]

👍👍👍 Must use a DTM clear for this

[@cvrpov]

Thanks for watching. never had a problem using none etch personally

[@TheOrbinson]

Use a light coat or 2 of Mipa 1k haft promoter onto the bare metal, flash off then clear with your preferred 2k lacquer. Mipa haft is a game changer, takes seconds. Comes in aerosol, or tin to run through your clear gun. Having tried various methods over the years of stripping the DC face, my preference would be 180>320>500>800 rotary mop sander. If you have a tyre machine, keep the wheel rotating whilst holding grey/red scotch firmly onto the face to recreate lines in the correct direction

[@TR-vm6gu]

@@TheOrbinson that's a great idea with the tyre machine, I recently got caught with a wheel in an underground carpark ,I'm just wondering what clear coat to use

[@TheOrbinson]

@@TR-vm6gu adhesion promoter onto the bare metal, then your clear coat of choice. Any 2k clear should suffice

[@stevewatson4978]

Great tutorial! Thanks 🙏

[@cvrpov]

thanks for the support mate

[@LetsSmash007]

My hats off to you man!!! Thank you

[@cvrpov]

no problem

[@parallelpost]

Conversely, if you are using 600 grit for wet sanding it is where to begin on plastics that lose the clearcoat. I refinished my Benz wheels from 2003 but not machined rims or powder coatings. My new Benz rims are machined, powder coated and yup, I gotta do something about the minor imperfections done the past year.

[@cvrpov]

Maybe refine with 1000 after 600

[@kozaec]

Nice work👍💪

[@cvrpov]

Thankyou buddy

[@RTSL84]

Hi, thanks for the video. But, the big chunk missing at 4:03. How do you repair it? I think you should have include that in the video.

[@st33fie]

This is marvelous

[@cvrpov]

Thanks for watching

[@glitchtheory6609]

Another great video mate, What compound did you use ? Really glad I came across your channel and subscribed

[@cvrpov]

Thanks pal. I am trialing one at the minute but 3m fast cut and most good compounds will do

[@nine1401]

Love the video keep it up!

[@cvrpov]

Thanks

[@bigjohnfury5662]

*Listen you made a nice job on that fair play 👍*

[@cvrpov]

Thanks john

[@truckomize9326]

Well done bro 👏

[@cvrpov]

thanks for watching

[@ratje808]

Thanks thanks very nice explanation

[@cvrpov]

You are most welcome

[@winnsautomotiverefinishing]

I'll definitely be giving both of those methods a crack to see how each of them look after clearcoat, would the infrared heat lamps work on this to cure the paint as it does on cars, being alloy it would take a little longer compared to a normal car panel yeah, I am coming into winter soon here so will have to look into getting me some of them

[@cvrpov]

Takes longer with wheels but definatley a big help

[@TheCmoney84]

This is fantastic mate!

[@cvrpov]

Thankyou

[@TheCmoney84]

@@cvrpov no problem! I’ve learned a tremendous amount from you. My back ground was in fiberglass boat repair, so there were new things to learn when I moved to cars and your channel is full Of great info. Cheers!

[@cvrpov]

@TheCmoney84 great to Hear mate. We got plenty more to come

[@zak.flying]

Going to try this great video, subscribed. Can you do this with alloys on effectively?

[@cvrpov]

Yes. If ur in the uk I do a kit for this over at www.paintgear.co.uk

[@Nathan_Breeze]

This video was very detailed and the closest to my situations as I've found on KZbin. Following sanding both dry and wet finishing with 1000, I see colour differentiation in the spokes I've done. It isn't a uniform machined like finish but rather machined and sort of faded white near the hub. Do you have ideas on how that happened and how I can remove them before polishing and lacquer to look similar to your uniformity before you used the compound?

[@cvrpov]

Maybe it needed a bit of further sanding in that area. The whole wheel should look fairly uniform if all the original diamond cut face is removed

[@Nathan_Breeze]

@@cvrpov Thank you for the quick reply. That makes sense but I ended up painting them. I could not get an even sand because of the curve of the spoke in toward the centre hub. due to the offset. Everything else in your video helped very much.

[@eoinosullivan2636]

Great job!

[@cvrpov]

Thank you! Cheers!

[@neilatkinson7259]

Great video. Subscribed. Look like my GTD wheels! Can the tyre be left on and still get decent results?

[@cvrpov]

It helps but its not essential, it can be done with them on. breaking the beads helps with access though

[@whitepulsarrbeli1309]

hello great tutorial you ended up spraying with clear coat?

[@patcosgrave9682]

Great video

[@cvrpov]

Thanks!

[@Rob-ty3ig]

thankyou, made it so im going to attempt next weekend on my daughters car, been driving for a week and just caught her diamond cut alloy on a kerb ouch

[@cvrpov]

Maybe check out my spot repair diamond cut videos in wheel repair section

[@Rob-ty3ig]

@@cvrpov thanks, when i say caught what i mean is she slammed into the kerb then drove along said kerb until shes created a wonderful pattern on her wheels :) i'll watch both videos again before i attempt it anyway

[@Pendaws]

Bloody brilliant :)

[@cvrpov]

thanks

[@daveholmes5540]

Looks good and its great for a short term fix but dont expect that clearcoat to have good adhesion.

[@cvrpov]

Still on the car 6 months later 👍🏼

[@daveholmes5540]

@@cvrpov treat it with care it might last longer. Clearcoat relys on physical adhesion, a polished surface requires chemical adhesion. Thats why wheels with machined faces always end up failing eventually. But you done a good job. What clearcoat is it? 2k acrylic?

[@cm1133]

@@daveholmes5540 2K clear has a hardener.

[@daveholmes5540]

@@cm1133 yes its a catalyst, it still requires a physical key.

[@alexasigno]

I'm guessing @cvrpov uses a direct to metal clear coat, which can be applied direct to polished non-ferrous metals. The issue for us DIY users is that you can't buy it in small tins, and you'd need airgun setup.

[@morjac11]

Brilliant, disappointed no mobile wheel repair near me attempts diamond cut wheels so will have to have ago myself 😬

[@cvrpov]

Good luck buddy

[@gswedge25]

Great job, !!!

[@cvrpov]

Cheers Scott 👍🏼

[@paulcatherall4545]

Thank you very much for the video, im going to have a go at my T5 wheels after watching your video. Ive got a sander with round disks will that be ok to use or do i need to get a polisher.Thank You

[@cvrpov]

Should be OK. A rotary would be better tho

[@Lee_succell2946]

For standard alloys, could you also use the key up method and then laquar, or would I have to use spray paint that matches the colour of the alloy first.

[@Sevy77]

Great video cheers m8

[@AndrewSmith-bb8sh]

Great video, just wondered if I taped of the bit of the wheel that did not have the damage. Would that work?! That way avoiding keying and lacquering the good part of the rim!

[@cvrpov]

Can do

[@AndrewSmith-bb8sh]

Cheers, project sorted in the next few weeks now. Keep up the good content.

[@furiouzzzz]

this is an exquisite finish

[@Helifax19]

I genuinely wonder, how is the wheel/rim geometry after that? All that cut metal surely affects it by some degree, does it not?! Awesome video btw!

[@cvrpov]

Always get ur wheels checked and balanced regularly

[@jonmarshall9443]

Just came across your channel.. top work man! Need a lil advice I’ve got some 18” rotors that are Dimond cut and I want to repair the curbs myself! Can you recommend a good rotary sander to get this done?👀 thanks man!

[@cvrpov]

Any cheap one from amazon. As long as it has variable speed. I have one for about 60 quid 6 months of hammer and still working

[@samperras]

Thank you

[@cvrpov]

Your welcome

[@curranhouse]

Top Job!

[@cvrpov]

Thanks

[@theturbo2292]

Great video, just getting all the stuff together to do my badly corroded super metal diamond cut alloys, will I need to buy a respirator for spraying the lacquer in or could I get away without one?

[@cvrpov]

If your in the UK check out www.paintgear.co.uk they do a rotary kit with all scotch and sandpaper included

[@hafidelbouzidi9507]

Maaaann, you made it look so easy. Makes me wanna jack up the car immediately and have a go.

[@cvrpov]

Thanks for watching

[@rustycopperpot]

Good video. I’d have just left the alloy bare, and gave it a polish to protect it. That way you can easily buff them again if they get dull and corroded.

[@cvrpov]

Alot of maintenance involved doing that with no lacquer on them

[@superseven220]

Nice job

[@cvrpov]

Thankyou

[@warrenstacey2794]

When you put the lacquer on does the colour between the spokes need to be keyd with scotchbrite or can the lacquer be put strait on. I have a Mercedes wheel with black between the spokes you have inspired we to repair myself

[@cvrpov]

Yes key these areas with grey scotch

[@giorgikevkhishvili5204]

great job, looks perfect. I have a one question, I did is the same way, but when spayed the lacquer, the wheel became darcker, can you give me advice?

[@cvrpov]

This can often happen. Not much you can do about it

[@simontritton4131]

Ive heard that 1/2k lacquer from a can isnt going to last very long...so is 2k with hardener via tin and spraygun best ? - ie whats best lacquer to use

[@RdashP]

inspirational job! tx. Question: Are the bare looking sections of Diamond cut rims also always all-over lacquered from factory or are the bare metal shiny sections sometimes only polished and left UNlacquered and sold as such? If partly or always fully lacquered, how can I tell? Since on first sight, the shiny Diamond cut sections of my original 19” Audi diamond cut rims look UNlacquered over there?

[@cvrpov]

Always lacquered but could ve a satin or matt clearcoat

[@cosmooooooooo]

This is awesome thanks a lot! Insta-subscribed! I would ask two questions if I may, why didn't you use the 1000 with the rotor + sprayed water ? And if we want a more mirror finish is it ok to go 1500 - 3000 ? Lastly I saw a trick on applying the clear coat to adhere better by warming it, putting the tube in warm/hot water before applying.

[@cvrpov]

Hi. It's down to personal preference the last sanding stages. How shiny a mirror finish you want it. Warming lacquer helps with flow and maybe a little bit of adhesion

[@jordanmcdonald1985]

Great video, any tips on turning a shed unto a paint booth?? What's needed and all that?

[@cvrpov]

You'll need some extraction in there

[@balsabreaker4272]

Just a thought. When you use the grey scotchbrite on a machine to produce the diamond cut effect, if you were to work from the rim to the centre, the lines would go the same way as the original. Not a criticism, just an idea

[@cvrpov]

Yeah i get what your saying mate. Diamond Cut is always a work in progress and I try various techniques. Appreciate any suggestions

[@raymondtuckey6035]

Fancy doing my wheels for me bud 👍👍

[@maxlandy7642]

Looks great. Would be good I'd you showed how to paint the insides too if that was damaged.

[@zigzag7194]

I agree... I'm doing up my Volvo s40 wheels just now and they are badly damaged. But watching this video makes me wonder if I should have two tone in order to them look good again. I've got no chance of having a diamond cut on them as they are a different style wheel. 🏁

[@cvrpov]

Next time

[@zigzag7194]

@@cvrpov next time 😂😂😂😂 I just want people to know it's not as easy as it looks. I've got 2 of them done. And that's with a week off from work. Make sure You've got the tools to do this job. These guys make it look so easy hat's off to them 👍🏿

[@KOMAR9111]

Doesnt the gray part before lacquer needs also be polished?

[@anthonykinrade8642]

Nice job...

[@cvrpov]

Thanks

[@netzoned]

@CVR POV ... Good video. _Can the machined area be polished to a mirror-like finish to look like chrome?_ And, on the painted area, can regular enamel be used to change the color, or does it have to be high-heat paint? NOTE: In the description you say, "Option 1 is to do some wet sanding to refine and then polish as a finishing stage. This offers a very mirror like, polished look to the wheel face." Apparently, the camera does not do your work justice if you did what I want. If they did not look polished enough to mimic chrome, I guess go to 3000 grit? What? Thanks in advance!

[@betodrk]

I’ve watched this several times and finally started working on my wheels from scratch (yes, bare aluminum). My concern is about the clear coat cause I don’t have a spray gun and can’t find a can of 2K lacquer anywhere here in Mexico. I’m thinking of using plastic clear coat over the entire week after using clear 1k lacquer for the inner paint. Any suggestions are welcome.

[@cvrpov]

I'd keep looking for some 2k

[@johnsteed265]

You don't have to clear coat them. They will last for years with only wax on them!

[@davidbroadhead6121]

I paint wheels for a living and I use a direct to metal laquer but it does need to be put through a spray gun

[@motion_deep]

Phenomenal!!!

[@cvrpov]

thanks!

[@unholysupertramp]

Great video, what can be doen about the internal (black) paint blistering!

[@cvrpov]

Sand by hand or machine, mask off, colour then lacquer as normal

[@MrBillUp]

Really nice finish there buddy. These wheels were already in pretty good condition, so what if the wheels have deep gouges out of them from being curbed? How do you tackle that? The DIY videos I have seen the person just grinds out all the gouges, completely losing the profile of the wheel, and making it impossible to match all four corners. Any good tips?

[@cvrpov]

Maybe check out some of my other wheel repair videos in the playlist mate i think u will find some answers there

[@cfronin]

Do you need to add laquer ? Does the wheel corrodes if you keep the brushed aluminum look without protection ?

[@macducati2304]

I bought all of this gear to do mine and spent hours trying to get it right. Bottom line is....you can't get it the same finish as being diamond cut. Have a go by all means, but as I say the end product wasn't perfect. I can understand people wanting to have ago though as some places charge stupid prices. I found a place that charged a reasonable price.

[@McT740052]

Absolutely spot on. By the time you spend money on all the products and hours of fucking about and still no getting it perfect you will wish you paid £100 and got it done professionally. Don't ask me how I know 😂😂

[@cvrpov]

its 100 a wheel though

[@Malkit210490]

Where you based in the UK? I'd like you to work on my alloys. Happy for you to create videos and last but not least i will pay. Great work.

[@cvrpov]

I dont currently take bookings

[@muhammedpatel707]

Great video helped alot very helpful, the first step the 180 grit how deep are you supposed to go as I have done 1 alloy for my bmw diamond cut alloy I have got a chrome finish to it the top bit but if I scotch it and then laquer it shows up alot of scratches what's best solution here ?

[@cvrpov]

Hi, you should go as deep as you need to without compromising the wheel or damaging the inner spokes. use grey scotch if red scotch is leaving marks

[@muhammedpatel707]

@@cvrpov thanks for replying back, and yh I have been using grey scotch but it still shows up with light light scratches unless I have been scotching very hard

[@sebastiens4452]

Wouaw!!! Nice!!!💪😉

[@cvrpov]

Thanks