Cybertruck loading/ hauling 1800lbs+ of Drywall!

Demo of a forklift loading 36 full 4x8ft 5/8in thick drywall in our AWD Cybertruck! There is a short on our channel of the truck arriving successfully to our shop. (note after further research, it is more expensive than a lot of other trucks as is LOL)

[@nerrade]

34 sheets of drywall. Impressive. I'm pretty sure that bottom sheet was destroyed. The guy had the tilt too high on the forklift.

[@ChitFromChinola]

I thought he did pretty well for a guy that just started yesterday.

[@sergioguillen2530]

plus they left the board between the sheet rock and the bed after they pulled the forks out, so now all that weight is on that part of the truck. you need to watch those guys

[@travelwithtesla]

😂​@@sergioguillen2530

[@travelwithtesla]

You could see how the whole stack was tilting left and right because of that board left under it. Not cool. I'm glad though this didn't end up like one of those fail videos (for the CT's sake) 😂

[@ChitFromChinola]

Remind me to never videotape anything ever being loaded into my truck. :-)

[@Blahmanwhysoserious]

I was going to buy a Cybertruck for this very reason but then realized it was only 50 bucks to rent the F250 flatbed from HD for my drywall runs.

[@braxtonclaflin1818]

Literally what I think when I see people drive trucks for their daily commute

[@jasper_of_puppets]

Wow, that's actually a pretty good deal.

[@blazetownsend8785]

@@braxtonclaflin1818 Same, not sure I can justify a personal truck unless it was being used as a truck almost daily and not a passenger/commute vehicle.

[@anthonypelchat]

I've been doing that too. But unfortunately, the trucks are frequently sold out at every HD and Lowes nearby me when I actually it. Will be trying to buy a cheap truck soon just for small jobs. Would love to have the CT or even Lightning or Rivian, even for a daily driver. Cheap enough to drive daily with electricity from home. But the trucks are way too expensive at the moment. Maybe in a few years.

[@Turbo.M777]

I love Home Depot. Wish Lowes did that. Supposedly some do, but not the one in my area.

[@aaronbounds1336]

Finally! Practical use cases demonstrated. Nice. More please.

[@ttkddry]

Sure... now accellerate and see how long the load staysin the cargo bed with those straps....

[@gxd4b1]

aaron doesnt need to see the Cybertruck actually drive with it .. easily pleased arent you Aaron?

[@meehanasap]

I need to see this guy drive home. Hopefully there are no hills or speed bumps.

[@specialkonacid6574]

I'm sure it handles real well with all that weight behind the rear axle

[@leemyre2901]

This doesn't show anything. I have put a similar load in my 02 f150 with the super short bed. It sat fine. Drove like shit and stuck out too far. Loaded just fine though. Show it driving and how it did and power consumption. That would show real world use in my opinion

[@mastercraftsman4213]

Getting it loaded and making it home are two entirely different things......

[@markrobinson63]

THIS is the type of cyber truck video ive been waiting for. Thank you!!

[@Bobbygetlucky-kc3fy]

Now wait for it to get to its destination.

[@andyb9994]

Well his battery died and did not make it home that evening!!!

[@zipp5398]

Stumbled across this video while walking through KZbin for content on cyber truck. Thank you for sharing this. This is one of the things on my personal list that I wanted to see done with the cyber truck hauling all decent load in the box as well as towing. This was on my list, and this definitely covers what I wanted to see for something being hauled in the box👍👍👍👍👍👍👍👍👍 thanks again next thing on my list is is to see them Hall some round bales and use it on a farm

[@markemma5]

My friend, I'm afraid this video didn't show this hauling anything. It was just carefully loaded. I doubt it could drive well loaded like that. And how did the suspension hold up? Maybe once. I double it could it do it often like a real truck.

[@KrisTC]

Nice to see it doing work! Would have been good to get a shot of it driving with it too.

[@kentPitbull]

That's what I'm hoping for as well.

[@leorickpccenter]

was hoping for that

[@Maax1200]

Wont go anywhere.

[@CyberTruckSecrets]

Yea it was dark out, in hind sight i should have!

[@SirGregoryFamilyYouTube]

@@CyberTruckSecrets Can hindsight see in the dark?

[@jeffharrison6059]

Wow, that air suspension coming in clutch, and the truck looks good while hauling that.

[@CyberTruckSecrets]

Thanks 😎 glad to find it can do truck stuff

[@chrissmith8469]

Shit will prolly on make it 10 miles after all electric sucked out of it

[@ronin7645]

​@@chrissmith8469- Are you 12? Do a little research before sounding dumb.

[@joshhigdon1201]

@@chrissmith8469there’s always going to be at least one hater with this comment 🤦🏻‍♂️

[@chrissmith8469]

@@joshhigdon1201 not hating just saying u would run out of juice very fast if u didn’t live close

[@Ojames600]

This is what I needed to see, I want to see more Home Depot and Lowes trips. This is how I will be using my CT.

[@ObeyTheAlgorithm]

How early did you place your order… before or after delivery event?!

[@Ojames600]

@@ObeyTheAlgorithm Before the Event. A few months after the CT was first announced on stage.

[@jabberwolf7348]

Will you be putting stuff in the bed... and not driving it ? 😉

[@Ojames600]

@@jabberwolf7348 I will be doing lots of Lowe’s and home depot trips in spring. Will put anything that fits

[@AI.programming]

If a tradesperson ever turns up with a Cybertuck (social media truck). they have lost the job.

[@aservant2287]

They probably ask to charge it for 8 hrs because of no more left.

[@mrtahoe]

I can do whatever I want

[@Bobbygetlucky-kc3fy]

Thank you!! I can't picture it!! Dude steps out wearing hoops in his ears and blue hair.

[@richdurbin6146]

Interesting to see a cybertruck finally used for truck things.

[@radicalrick9587]

*You mean, instead of drag racing?*

[@CyberTruckSecrets]

Hope to add more soon!

[@feint007]

Have you seen the video of it on the sand dunes? Badass

[@Bobbygetlucky-kc3fy]

Only allowed two trips like these, the third voids the warranty...LOL!!

[@CaptainSeafood]

Finally a real Cybertruck channel I’ll be following. The rest all cares about themselves and how they like to wrap their truck etc… thanks for sharing this video. I’ll be following your channel .

[@CyberTruckSecrets]

Thank you! Although it currently getting wrapped but thats because we own a wrap shop hah! We will continue truck stuff when its done

[@444thunderstr0ke]

1800 Ibs is crazy. This is what I like to see the Cybertruck doing. Thanks for the video!

[@Nordic67]

lol

[@Nordic67]

1800lbs is crazy lol your crazy. A half ton 4 cylinder would take that without overloading. Even a mini van with the seats down would take it. This is not impressive at all. A 30 year old 3/4 ton would handle more than double that without a struggle

[@abrahame6470]

Whats crazy about 1800lbs?

[@Nordic67]

@abrahame6470 that weight 1800lbs is not much for any vehicle. You could put that in a mini van or a light truck. Working in the trades we deal with lots of weight. We can put that load in a 50 year old truck or a modern half ton no problem.

[@abrahame6470]

​@@Nordic67exactly what im saying is not a lot. Sometimes i load that much weight in my 99 ranger obviously is not safe but sometimes you have to get the job done.

[@TRYtoHELPyou]

"yeah, can i get half a pallet of sheetrock, and can you make sure you send a nice fracture right down the middle of the pile.... Also can you kinda pierce the bottom with the forks a bit too? I. Going for a rustic look on my walls " 😂

[@Bobbygetlucky-kc3fy]

Nothing mud won't fix.

[@ChitFromChinola]

Good video. Thanks for posting!!

[@connorcaba2492]

That bottom sheet is destroyed for sure

[@2DahMoon]

That is the offcuts sheet now. Home-depot loading service ...

[@CyberTruckSecrets]

Most are not perfect. Thd doesnt care how the drywall they sell looks but the bottom sheet was actually ok!

[@craigkovatch7564]

Drywall is cheap you always have a few sacrificial sheets

[@foxtrotwolf6081]

Yeah, I would think the tips of the fork would gouge the bottom sheet. Usually, they tilt the blades to match the bottom sheet and use the guard at the aft edge to push the stack in.

[@connorcaba2492]

@@craigkovatch7564 drywall 5 years ago was cheap…it’s not cheap anymore

[@nononsenseBennett]

Impressive considering the a lot of the load initially was taken up by just the gate! Elon will be proud.

[@markplott4820]

tailgate is spring loaded , becareful.

[@ConnectingODots]

around half the load. The other half on the forklift or rolling table

[@markplott4820]

@@ConnectingODots - how about , just have it Delivered ?

[@PhotoHoag]

Yeah, cringed at that! Initial set down. Well, there goes the tailgate.

[@OtisFlint]

@@markplott4820 It's ironic, but that's what most people do. Buy a truck to haul things, and then have things delivered because it's too much work/risk to go haul things.

[@jonahyun]

well done sir. masterful forklifting!

[@SteveRCPilot]

A master would not have trouble leveling the forks. Guy was all over the place.

[@sigsire9054]

Butcher

[@RubenGonzalez-zk1sk]

@@SteveRCPilot made me cringe a bit

[@johnhoward3119]

Fabulously fine forkin for sure.

[@mixmastamikal]

That was insanely bad from perspective. It was painful to watch actually.

[@shaneh734]

Cool video! That was really neat to see!

[@dscat5908]

There are a lot of safety issues that would get us fired at our Home depot store.

[@Dot_PHILLY]

My store too. What happen to the" Zone of Safety" fellas? Coaching... 😂

[@fabr5747]

American pickups none trucks (this is not a truck, a truck is a heavy vehicle) have no convenience AT ALL ! This is a proper vehicle for this kind of things: kzbin.info/www/bejne/j5O7mmannJymnJY And for the ones wanting offroad capable vehicles? 4.27 kzbin.info/www/bejne/iZvToJtsnNSmiJY

[@CumminsDriver]

@@fabr5747 you do realize we have flatbed trucks here as well right? Most homeowners aren’t looking to own a flatbed or box truck for the occasional trip to do something like this. A 4wd 3/4 ton can go off road, haul whatever you can fit in an 8ft bed, pull a trailer for anything that doesn’t fit, and still be driven to work or the grocery or trips, etc. And In the 🇺🇸, it is considered a truck by most people’s standards 🤷🏻‍♂️

[@teamgartz-motorsports6881]

Cool to see cybertruck being used as a truck, I don’t think that will be very common, but I appreciate it. Waiting mine to do the same 😅

[@alexanderkenway]

It'd be awesome to know what kinda range you got. I know that weight isn't something you'd haul regularly but that would be a cool stat to have

[@mmcmillan1999]

Forklift skills need a bit of work, but that’s a real life test for sure. I would not have had the courage to let someone else load my brand new truck like that.

[@foxtrotwolf6081]

That seems to be the normal technique for loading onto pickups with sides or box trucks (U-Haul). Flatbed trucks are loaded from the sides.

[@sparkster1314]

Like how home depot would have delivered it on a flat bed and saved everyone time and money.

[@fabr5747]

Or you need a vehicle adapted for that need? kzbin.info/www/bejne/j5O7mmannJymnJY

[@jeffjones2021]

So brave letting the HD evening crew put 34 sheets in your cybertruck! They did a pretty good job though all things considered. 👍🏻

[@andruboine]

That is the worst forklift loading I've seen hahaha

[@CyberTruckSecrets]

get what you pay for LOL - my back thanks him

[@almateenyazid]

Fork-lifting like that. Now against Home Depot policy!

[@davidbrayshaw3529]

I love my Aussie drop side tray. No rooting around with trolleys or worrying about hitting anything. Forklift, straight up to the side...job's done. There is an untapped market in the US for the types of utes that we use over here.

[@user-xp8jz2sf1p]

Seeing that little roll around table hold it was far more impressive than seeing the truck hold it.

[@DirtyTesla]

Great taste in music 👌

[@chiboyife5456]

When are u getting urs

[@TeslaElonSpaceXFan]

🙂

[@LordOfTheThreeWorlds]

The sound of the orange dolly before it came into frame made my heart leap a couple of beats - thought the forklift knocked the tailgate off the truck

[@MyGadgetsWorld]

Wow , that is so impressive, I thought truck was gonna do wheelie with that much load in the back. Great Tesla

[@TheBagOfHolding]

The truck is super heavy from the battery.

[@Javii96]

Lol i remember as a kid we had those penny racers you’d put a penny as a weight in the back and when you wound them up they’d do a wheelie.

[@chrispnw2547]

Isn't the payload the weight of the contents in the bed + the passengers in the cab? What was the total weight available (specifically stated on the vehicle as configured NOT what is stated on the website)??

[@aussie1546]

use of brake lights after load is very nice edition. Engineering top notch

[@otm646]

I pick up quite a few loads like this, the trick is to get a piece of sacrificial osb/plywood on the bottom. I have a 46" by 8' skid I bring to go on top of that. It makes it way easier for the yard guy.

[@michiemichaeldube4882]

Great stuff

[@OCDRex11]

Very good video to see. All the comments about saying you should have towed, and why do that, etc. make me wonder what else a truck is used for? This is exactly what I would do with mine too. Thank you for sharing. Question, do you feel the compressor REALLY struggled? I can tell it did but I am wondering how it sounded. Heck, now I want to know how many psi those bags operate under with this weight?

[@Top-NotchRentals]

Well to make use of a truck properly you would be towing... thats predominantly what trucks do. Loading the bed to max just wears down your expensive truck instead of cheap trailer.

[@mikapeltokorpi7671]

The load was centered behind the rear axle. Which is very dangerous.

[@smvballer6]

@@Top-NotchRentalsso what’s the point of a bed?

[@olaf9957]

​​@@smvballer6 filling it up with ice cubes for tailgate.

[@smvballer6]

@@olaf9957 😆

[@texaswunderkind]

That's amazing! Only half of the load is hanging out. Great work truck.

[@JustPlaneNutzRC]

😂😂🤦‍♂️

[@lachlanB323]

It's over 6 foot

[@foxtrotwolf6081]

8-foot sheets, 6-foot bed. That's how it would look on my Taco with a 6-foot bed. However, they won't fit between the wheel wells so they stick those risers in the bed to hold the sheets high enough to clear the wheel wells.

[@pastillachkitolina6874]

Your math sucks

[@bingobongo939]

@@foxtrotwolf6081 I fit sheets of drywall and plywood flat inside of my Honda Odyssey 2006 and closing rear door.

[@ajwalou-nack2343]

I would worry about lack of proper tie downs . If i had a truck for work i would like tie downs on the outside of the truck bed . Like the ild Datsun 720 or Nissan D21 . Where did all the external tie downs go ?

[@JustJonezing]

I'm wondering if it would have been better, to have the suspension max out before installing that load?

[@sparksmcgee6641]

Won't material. Your not understanding that it's the same air pressure no matter how much weight in on it.

[@streddaz]

Nice! When you want to unload, just back up to where you want it dropped off, put it in drag strip mode and accelerate away and it will unload itself! 🤣

[@WANDERER0070]

And youll have pile of broken drywall sht 😂

[@streddaz]

@@WANDERER0070 well, you might get a couple in the middle that survive 🤷🏼‍♂️

[@nerrade]

I want to see that video!

[@CyberTruckSecrets]

I REALLY wanted to LOL

[@erwinpa1]

I wonder if it is better for the air suspension to inflate / rise before the load and not after. It seems the extra load would cause unnecessary stress on the compressor.

[@CyberTruckSecrets]

I was expecting to auto raise - the last time i had 500+ lbs in it it raised up on its own with a quick "pssst"

[@OpieGNSB]

There is apparently a small storage tank at 350 psi. This is one reason that it doesn't offer an air compressor outlet to run other equipment. This means is responds quickly, but then takes time to refill the small storage tank.

[@endi4real]

Of course you're right, common sense should have dictated not to try raising the ride height while so heavily loaded...that was hard to watch.

[@kentPitbull]

⁠@@endi4realLike in any hydraulic system, the pneumatic pump is designed to be able to pressurize at the max load; however, I agree that it would have made the pump's life a lot easier if it was raised before the truck was loaded.

[@edwardszane]

Good video, congrats on getting your truck. When did you place your order?

[@RogerM88]

For cargo loads, nothing better as a flat bed with side panels. Easier to load and unload. As more affordable to repair if damaged.

[@MrDjillest303]

Looks amazing

[@aboutWilfredo]

this is the kind of content I wanna see ..not "oh hey look at my new wrap and new wheels" content..so over it. I wanna see it put to WORK!

[@lostvayne104]

Agreed

[@trythis2821]

Tailgate looks like it is bending down further than it is supposed to. Might be better to put an extra packer under the load to distribute the weight more evenly. Like someone else in the comments said. I would load one sheet at a time for safety and avoiding damage. At one point I wondered if the whole pack of sheets might snap in the middle.

[@TheBowersj]

$9/hr to load drywall by hand or $15/hr to load it by forklift and there's no tipping these guys. I understand why the crew decided to call the forklift guy over, there's probably a line of angry cars behind him trying to get loaded and just waiting there.

[@davestir5743]

Based on how long it took them to load it with the lift, I can load those in the same amount of time by hand. With two people it would be even faster. @@TheBowersj

[@TheBowersj]

@@davestir5743 fair enough, I appreciate any level of help these lot attendants offer when loading vehicles.

[@JohnDoe-zz3hj]

we've had 2 Tesla truck not drive away with loads over 1500 lbs at our store. A motor locked up on one and another tesla the door would pop open and the truck would not move after that. Both took special tow trucks to move them from the lot.

[@777Outrigger]

I remember when the F-35 and the F-22 had teething problems like this. Now they're clubbing F-15s, F-16s, and F-18s like baby seals in exercises. And terrorizing your enemies when they come close to their borders.

[@Bobbygetlucky-kc3fy]

LOL!!! That is some funny shit!! Considering I'm a veteran drywaller, and I know what can happen when even a three quatre ton truck gets overloaded. No front brakes!!! These EV owners are so over obsessive to prove a point!! But they bite it every time.

[@777Outrigger]

@@Bobbygetlucky-kc3fy They're not overloading the Cybertruck here.

[@jstewart627]

Now this is where I love an 8 foot bed. no need to tie down, it fits right in there with the tailgate up.

[@cardboardboxification]

a real truck has a 8' bed or a 10'6" bed

[@sparksmcgee6641]

Still have to tie it down unless you want it all over the road. So you're just hating.

[@arthurwagar88]

I liked the fork lift. First one if that type I've seen. Only good for smooth floors. Not surprised at CT.

[@stikbotforzafilmsandmore]

This is the first construction use i have seen with the cybertruck

[@Cow.Tipper800]

That’s because 90% of pickup owners work if offices they just want everyone to think they’re real men on the weekends..

[@cardboardboxification]

no one working for $20 hr on a construction job will be buying the cyber el camino

[@Cow.Tipper800]

@@cardboardboxification 20 an hour? Is that what you make ? Because you’re extremely underpaid

[@nylonstringninja]

If that is 4x8 5/8 fireguard it is 70lbs a sheet, over 2,400 lbs loaded in there. When I load it in trucks I tear the papers off and float them in one at a time. It sucks having to pull them out in doubles.

[@EricPeelMusic]

It’s probably 1/2”, not 5/8”

[@nylonstringninja]

​@@EricPeelMusic1. Usually fire rated is 5/8. 2. It says it is 5/8 in the video description 😛

[@johnchang3807]

Finally, Cybertruck met its older cousin , forklift.

[@savydude1]

Thats impressive.

[@chrisjones903]

question how was the drive back how far did you go with this load ?

[@CyberTruckSecrets]

It honestly drove pretty normal, we took it easy but the ride and handling was still great

[@chrisjones903]

@@CyberTruckSecrets Nice was wondering if the handling was compromised any i plan on throwing a lot heavy stuff in mine

[@streetmoney21]

😂 it’s crazy how people think this truck is not a highly capable truck. It was designed by the best engineers on the planet. Glad to see content like this so people can see for themselves. This is one hell of a truck.

[@craigfreeman9280]

I can only hope I live long enough to be able to have one, two plus million orders in front of me 🎉

[@hobo1704]

Highly capable 🤣 Any ute can carry that..

[@melantorja]

can we appreciate the guys that did the loading here

[@andruboine]

No because they did a horrible job 😂

[@johndeskin9429]

“what kind of range do you get” “normally about 290 miles…. now about 290 feet”

[@catalyst429]

its still only 1800lbs. Even my 4cyl transit van (basically a focus with a small van back end) is rated for 1500lbs. The cybertruck is rated for 2500lbs. You could throw a few bags of concrete in there and all your tools in the back seat and it will still be fine. Since brakes dont wear as much and it doesnt have a transmission, compared to a normal truck even if you have to work on suspension in the future id say this of work puts less wear on the Tesla

[@MyPapagio]

The transits rating is based mostly on the tires limits and upgraded shocks (from focus chassis). But, how it handles and pulls the weight is where there is a dramatic difference. No comparison whatsoever (I've had 1800 in my transit, and it's worrisome).In the cybertruck, you can't feel any difference.

[@sxsignal]

that cargo rating also includes the occupants of the vehicle and the rest of the stuff you pack in. so, 180-200;b man... thats pushing 2k. 500 under for the CT, but over on your transit (the cargo weight also includes the tongue weight of whatever is being hauled)

[@thezorzie]

it's closer to 2300lbs. it's 5/8" which weighs roughly 70lb per sheet.

[@Nordic67]

Look at the towing test, only 160 miles range on flat ground with only 6000lbs. A model T can beat it lol.

[@LovesM855A1]

Id brought a trailer but I gotta say you are willing to use it and thats great!! Id be nervous whole time on a 100k vehicle!

[@calebcohen1355]

Is the drywall all the way forward? I know it's only a 6' bed, but it seems like it's also a full foot from the front of the bed.

[@craigfreeman9280]

Those are ten foot sheets of drywall, eight feet to the tailgate edge…

[@pbmdh]

Actual video: Somebody puts a bunch of drywall in the bed of a Cybertruck Nowhere in this video is anybody 'hauling' it.

[@craigfreeman9280]

So you imply that the CT couldn’t drive with a partial load in its bed? Seriously?

[@hobo1704]

​@@craigfreeman9280it can't do much else champ so yeah makes sense to actually see it..😂

[@pbmdh]

@@craigfreeman9280 I stated what I stated. This doesn't show the Cybertruck "HAULING" anything. Just loading it. Can it? Probably, but we dont' see that here.

[@2nd3rd1st]

Would it be better to extend the suspension fully and then load the bed and adjust the height lower, to go easy on the air compressor?

[@endi4real]

Of course yes...seeing what they did was difficult to watch.

[@ronin7645]

​@@endi4real- Difficult to watch? You must have a weak stomach 😅

[@Cardroid]

can't wait for more real content. please include charging details.. how much $$ per charge, how long and how often.. thanks!

[@robertpeters9438]

Does the truck change the shock damping based upon hauled weight? Or an adaptive mode?

[@charlesstevensEnki]

I would like to see it in motion. You know hauling.

[@kentPitbull]

I don't like how they supported the end of the stack with a single bar instead of three - 1 where it was and 1 on the outside of each fork before the forklift backed away.

[@craigfreeman9280]

I agree, they might crack a few sheets on the way home

[@taylorlaneyachtandship3346]

Nice, how much less of range was after loading up?

[@protectanimals9792]

Nice ! Why not lift it before you put the load in ?

[@dandetweiler581]

I hope Home Depot corporate doesn't get wind of this video. We are now expressly forbidden to load drywall this way. Has to be hand loaded. Cool video though.

[@fabr5747]

Because it's stupid, dangerous, risk to break cars. American pickups have a design that have NO interest for real construction vehicles. Look at the European designs... kzbin.info/www/bejne/j5O7mmannJymnJY Unbeatable in convenience, ease to load, solidity, no need to worry about the body of the vehicle, can be loaded safely by forklifts and by cranes, etc... Americans have ridiculous designs...

[@ff8123]

Wow, you're using a truck to do something that trucks can do!

[@cardboardboxification]

its more like a fancy el camino, I wouldn't consider it a truck

[@tonynewman8586]

Didn’t see it actualy drive off ? and out the dry wall boards actualy dry wall boards or just foam ? and the vehicle didn’t go down on its suspension ? I reckon it’s all been set up 👍

[@JustJonezing]

Also should have put two pieces of done edge to keep it from teetering.

[@reru_personal]

Im really curious how the handling felt driving it home, having that much weight added changes the driving characteristics of any truck. (I drive an extended bed, crew cab F-350 dully, you can tell when the back is loaded.

[@camgere]

Not "hauling", more like "being loaded".

[@reru_personal]

@@camgere yeah, I would agree that your term is more accurate.

[@truhartwood3170]

He responded to other people asking this question - he said it drove pretty much the same, though they didn't do anything crazy, just normal, gentle driving.

[@reru_personal]

@@truhartwood3170 Thanks! I tried to see if he did, guess I just didn't scroll enough.

[@getyourbone]

Sure makes one realize just how small the bed is with that much sticking out the back… Thanks for the vid!

[@ronin7645]

It's a full size 6ft bed though.

[@radicalrick9587]

*It's a normal size bed but with more width than most truck since there's no wheel well like other trucks have.* *Only two feet of the 8 foot drywall hangs off the bed.*

[@CyberTruckSecrets]

The bed is 4'6" wide and 6ft long

[@getyourbone]

@@radicalrick9587 normal bed size is 8 feet long with tailgate closed… I’ve had pick up trucks for close to 40 years… That’s clearly a short box…

[@radicalrick9587]

@@getyourbone *Hey don't shoot the messenger. Those are numbers I got from KZbin Truck people. Clearly, you've got big beds and normal beds, like the Taco which is 6 ft in length but width is smaller with the wheel well in the way, which the CyberTruck does not have, hence more width space.* *I had an SUV that could fit a whole 4x8 ft plywood in the back, backdoor closed, no problem, but it was a much bigger SUV than most. My Dodge Journey AWD can't do either, width or length without something hanging out the back.*

[@justayoutubechannel7979]

That forklift driver really needs to take his test again 😂😂

[@brucec954]

Nice to see example of doing real work but also shows that for big jobs, unless you live in the middle of nowhere, its just as well to have it delivered to your job site.

[@thomasandriesen443]

how much more regen did you get with 1800 more lbs added to the weight of the vehicle?

[@CyberTruckSecrets]

The regen is super strong as is, hard to know

[@jasper_of_puppets]

infinite mileage now, bro

[@radicalrick9587]

*Every stop added 50 miles to the range.* 🤣

[@Billy.80]

Doubt it made much difference. The truck empty will max out regen, adding more weight would just increase the chances of having to use friction brakes to help.

[@JL-st1jf]

Is there a video on the cybertruck actually driving with that load?

[@CyberTruckSecrets]

Ive got a short of it backing it into our shop :) but looks just like a truck driving with drywall in the bed LOL

[@ChristianHernandez-cs2mu]

I’m more impressed with the skills and dedication the Home Depot employees have rather than the truck itself.

[@CyberTruckSecrets]

We were thankful for the free help!

[@terrya6486]

How did it drive with that amount of weight?

[@Jethr001]

Wow, first time loading drywall into ANY truck?

[@mixmastamikal]

Would have been faster to just have a couple dudes manually load it, that was an absolute shit show. Fun to see all these people praising this. 😂

[@ceeg0865]

Finally, somebody proves it’s a pickup truck! Nice!

[@CyberTruckSecrets]

More to come!

[@blogattacker]

I didn't see it move, did you?

[@jvman4971]

watching that drywall being loaded was like watching an event at the special olyimpics!!! HAHAHAHA

[@8literbeater]

Watching these guys ruin drywall was almost more exciting than watching wine age.

[@HashsirHaroon1]

Prototype CyberTruck had automatic self leveling suspension. So it will level itself if a heavy load is in the bed. Maybe it comes through a software update.

[@Hextavo]

Wait that's not standard with the truck already? Dafuq

[@randomfan5817]

It does, but it needs time for the compressor to inflate the shocks when the truck is on

[@randomfan5817]

Suspension was set to low Started rising after being set higher

[@CyberTruckSecrets]

It usually does auto raise, but i think because one of the doors was open it didnt this time

[@kimmariusolsen1828]

It's raised at end of video

[@bestreviews3786]

Quicker loading them by hand!!

[@MrCust0s]

Thanks for this video. I'm now cancelling my CT reservation.

[@christopherl.potter3915]

Nerve racking to load that truck!

[@kevinsmith7697]

Shoot! I did the same thing with my 77 Pinto wagon! Hauled drywall 2 miles home from Builders square, back in 1984! Then drove to work the next day! Now that was a great car! 🚙 👀👍🏻

[@thescinema]

If no one slaps it, saying, "that ain't goin anywhere", is it really loaded correctly?

[@leeshaver7825]

🤣🤣🤣

[@sjvtesla]

👍🏾😎 Truck doing truck things

[@albertosuarez6758]

You mean, ugly truck doing truck things 😂😂😂😂😂

[@phil312]

Sketchy as hell😂. I would load em 1 by 1😂. Thanks for posting.

[@michaelkester3881]

So one issue I see is with the tail gate down you won't have any rear lights being there integrated into tailgate?

[@edschultheis9537]

That doesn't look like a very well-balanced load to me. Notice at 3:50 that approximately 3/4+ of the load is behind the rear axle. Is there still enough weight on the front axle to provide sufficient steering control on the front wheels? I thought that the bed length was just over 6-1/2' with the tailgate closed. Assuming those are 4'x8' sheets, it looks like the bed length is 6-1/2' with the tailgate down, because the sheetrock is extending over the end of the tailgate approximately 1-1/2'.

[@ronin7645]

It has steer by wire. I believe it's the first production vehicle to ever have steer by wire. It's all computerized.

[@radicalrick9587]

*Don't forget, that back wheels turn too.* *But nevertheless, I would have loved to have seen it doing a wheelie all the way home.*

[@edschultheis9537]

@@ronin7645 Steer by wire has nothing to do with proper weight distribution of the load over the axles.

[@ronin7645]

@@edschultheis9537- The owner said it drove like a dream on the way home.

[@paulharsh78]

Would love to see the suspension level back up.

[@S2kBPRIME]

@4:45

[@neightarch]

Auto load level would be a good future software add

[@ronin7645]

​@@neightarch- It has auto level. I think due to the door being open is the reason it didn't auto level

[@IndaloMan]

Had the forklift driver done any training on how to operate it??

[@JaiUneGuruDeja]

Reminds me of Saturday night with the Mrs. We're all-in.... on TSLA.

[@mochutasull739]

Looks like longer 8 x 12 sheets. No babying the truck, put it to work. I want a Cybertruck, plug in my tools and welder in the truck outlet. Bamm!

[@CyberTruckSecrets]

These were 4x8 - we used our shuttle bus for the 4x12' haha

[@2DahMoon]

6' bed, only sticking out around 3'. This is because of the back angle of the bed. These are 4*8 sheets. There looks to be 34 sheets. This would be consistent with the 1800 lbs load in the description for 1/2" drywall.

[@TroySavary]

​@@2DahMoonYes, this really shows how misleading Tesla is when they claim that it is a 6 foot bed.

[@spacebound1969]

​@@TroySavaryI mean even with that ledge it's still larger than every other bed in the EV truck segment.

[@2DahMoon]

@@TroySavary I'm still getting the tri-motor. The video demonstrates it's real world utility. For 4*10 or 4*12 material, it's time to get that U-Haul 6*12 trailer for easier loading and unloading. CT3 is perfect for most real world application, like hauling 4 skids of pavers.

[@The1Mathieu1]

My goodness! The compressor is a beast too. Lets give that a round of applause too. Do you feel the weight when you drive 45mph? 70mph?

[@markplott4820]

1800 lb is LESS than MAX rating of 2500 lbs.

[@CyberTruckSecrets]

Went up to about 65, felt normal to drive!

[@Maax1200]

​@@CyberTruckSecrets Going 65 with that load secured like that kind of says it all. I now understand why you bought that "truck"

[@andrewfischer3971]

@@markplott4820 it exceeds it actually. Bed is rated for 1310 lbs if not the cyberbeast. Cyberbeast has less because of more weight. The 2500lbs is the total payload for entire truck, not just the bed.

[@markplott4820]

@@andrewfischer3971 - the BED can take FULL load, minus the frunk & under trunk w/ minimal crew.

[@greenfilly]

I remember my first day on a forklift.

[@kylelezark6805]

Props to the loader