Cybex Priam Handle and Fold: Full Disassembly + Repair Troubleshooting Guide

[@BarnevognverkstedNo]

As an independent, consumer-oriented reviewer, we have fewer revenue-streams open to us than the majority of other channels out there. If you would like to help support our work, could use a personalized purchasing consultation, or think you might enjoy some additional exclusive content in the form of articles, as well as access our regularly updated ‘Buyer’s Guide’ (which lists the models we recommend, as well as providing a lot of technical and lifestyle-related information), please visit our Patreon Page: www.patreon.com/thestrollerworkshop

[@Tammy-pp1tw]

do you have a tutorial on the rear wheel chassis assembly for cybex mios. (my pole popped out and trying to figure out how to get into there to be able to put it back and screw it in). TY

[@efeok4639]

Thank god you uploaded this video 🙏🏽 without you I could never repair my Cybex

[@mortpunch]

I've referenced this video on and off for half a year now, thank you so much for this breakdown. I finally fixed my stroller

[@thiagoscharenberg2568]

Thank you so much for this video. It just saved us 1k on a new one. We were able to get the spring inside the rear frame realigned! Ty

[@mantasremeika3027]

You've help me to save a lot of money and time. Big thanks from Lithuania :)

[@VerbrickstundZugeklemmt]

Greetings from Germany. Worked perfectly. Thank you very much!

[@CS-td1nn]

Incredible! Thank you for sharing - I am wanting to repair my Priam handle bar so this helps a lot. Thank you!!

[@andit.8145]

Thx for the video. Greetings from Hamburg with repaired "Kinderwagen" 😊

[@ittfender]

Thanks for this video from Russia.

[@uno2603]

Really helpful video and coment. You save me a lot of money. Thaks and thump up for next videos 👍

[@kgirishchandra]

Thank you. This was very useful!

[@michas292]

hello, thanks for the explanation and great video. do you have access to parts for this trolley? I have a problem with play at the connection with the handle.

[@Cheban89]

Thank you brother my e Priam has handlebar alignment issues and won’t engage the power function. I saw the stoppers and chickened out for fear of breaking them once I tried to take them out and they wouldn’t budge. I see I was on the right track but wd40 is a terrific idea 💡

[@natalitza93]

Hey, I got the same problem, did you manage to fix it?

[@Cheban89]

@@natalitza93 nope 👎🏼 don’t overdo it just get a warranty claim

[@andreacapruzzi9322]

Hi, are you able to make a video to show full disassembly instructions for the cybex balios model? Thanks a lot anyway

[@adnix88]

Hey great content. You do great videos. On my cyber Priam the front wheels are blocking from time to time. Do you have any idea how to open them and change the bearings?

[@veronicafabbrica6781]

Hi, is it possible to have a video tutorial that helps replacing the backrest lever of Cybex Priam stroller? Thanks

[@petrabkiss7454]

Hi did you ever do Cybex Priam/Balios/Mios seat backrest handle replacement ? Or do u have a video about that? Thank you

[@ditteandersen4578]

How did you remove the shopping basket? Bought a second hand Cybex Priam and would like to remove the shopping basket for cleaning.

[@simonl36]

Thank you very much!

[@rhesamaearellano7015]

do you have tutorial for mios pushchair. we have problem with the folding. it wont fold.

[@Lilytheediter651]

My handle is tilting down at one side is there any point of taking apart? Or is it broke

[@ashleyc177]

Thank you so much for this video but I must be doing something wrong, I just can't figure it out. I've got break cables in place, safety button on and can fit both outside caps on.. However when putting the actual button in place it just falls out 😭

[@riveradavid97]

@BarnevognverkstedNo do you have the Cybex Mios? I'm having trouble with folding my Mios the issue is with that knee part it's stuck it don't bend to close. Is there any videos similar to this. The manual didn't have anything as in depth like this.

[@BarnevognverkstedNo]

It's possible that part of the plastic from the actual button has broken off and is impeding the mechanism. This video isn't the Mios, but the process of removing the outer part of the button is quite similar across many model, so it might help: kzbin.info/www/bejne/gIjPk56hYpaGj9E

[@marwal7566]

You are stroller dr . How to contact you i have question please about my stroller?

[@ЛедиДи-у1ж]

Thank you

[@emiliyasmirnova4589]

THANK YOU 😊

[@marysaguier6098]

I was trying to disassembly my new Priam for traveling and fit in to a suitcase, I did all the steps but in the process I broke the side button stopper, so do you know where I can get a replacement?

[@BarnevognverkstedNo]

You can contact Cybex customer service directly, otherwise it's a matter of buying a used chassis and swapping parts, unfortunately.

[@marcingilarski6230]

Hi All, 2 questions: 1. Does sliding button on the handle supposed to be loose or should have some resistance when sliding to each side? 2. Does the whole handlebar should have movement up and down when pushing forward/backwards? (Not sure if explained right)

[@Hussein430]

Hi, the handlebar on our priam is very wobbly. Any idea what we should do?

[@BarnevognverkstedNo]

Wobbly is natural unfortunately, the central mechanism is sturdy, but a bit loose-fitted. :)

[@kamilekaz6685]

@@BarnevognverkstedNo is there any way to fix that?

[@Gondzis]

Great video. thanks :)

[@paigelarson9279]

You didn’t show how to remove the basket or the brake system?

[@GlenmontStables]

I have this stroller frame and the issue is I bought it used so the company will not help me. The stroller handle sinks in on one side when downward pressure is applied to pick up the front wheels. Is this something that would end up fixed if I took the frame apart like this?

[@BarnevognverkstedNo]

Probably. It would at least allow you to find the source of the problem and troubleshoot from there. :)

[@rompestump]

Hello. i have just the same problem, if its a little resistance (like uphill, grass, gravel) when trolling the handlebar sinks all the way inn to the lowest point the store i bought it from wont help us at all. so Glen did you find the problem ? did you disassemble the frame ? (if you found the problem, what was it ?) Thanks. Thor.

[@soulraizor1]

@@rompestump Hey, could you fix it? I got the same problem.

[@gergeki]

@@BarnevognverkstedNo Hello. I had same issue: When applying pressure handle bar on one side sinks 1 cm ( I guess normal) other side around 3 cm. Based on your great video I was able to disassamble and find the root cause. The rivets at 8:37 on the good side are tight, on the bad side are 1mm loose, and the whole thing wibbles a bit. I have 3 options in my mind how to repair, just can't decide which way is best: A: somehow strenghten, make the rivet tight for example with a vise B: weld the rivet to the base C: drill out the rivet and replace with screw and bolt

[@ackiid]

where to get the mf parts for this!? :D

[@misi_epa]

Thank you 🍀

[@sleepingclinic]

Thanks a lot!