CZ P-01 CGW firing pin

  Рет қаралды 4,858

John Jacob Wagner

John Jacob Wagner

Күн бұрын

I was getting light primer strikes from a used P-01 I bought with aftermarket CZ custom springs. Happy to report after install I have had ZERO malfunctions

Пікірлер: 13
@richardsnyder3297
@richardsnyder3297 Жыл бұрын
I enjoyed this video. Your occasional struggles demonstrate what is likely to happen to someone who is new at this. After doing total tear downs of a Glock 19, Sig p226 and a 1911, I decided to convert my SP-01 from a double action/single action with a safety to a single action only with a safety. I did a total strip down of my SP-01 and put it back together using Cajun Gun Works parts. Putting it back together was one of those experiences that i can say I am glad I did it but had no desire to do it again. With my new P-01 I only plan to do what you just did. Thanks for your video.
@shauen24
@shauen24 5 жыл бұрын
Its alot easier to get the firing retainer pin back in with the slide installed back on the frame, hammer down holding firing pin in position.
@jagpilotohio
@jagpilotohio 2 жыл бұрын
Ah-so grasshopper. Very crafty idea. 👍
@SteveSharps
@SteveSharps 11 ай бұрын
I just installed SRS-2 on my SP-01. I can concur that putting that lip back under the hammer spring is the trickiest. I found that a simpler solution is to release the other pin on top so I can hook the lip to the bottom first. I kind of wished I bought the Reach Reduction package and the hammer as well. Now I will have to redo that part in order to install the hammer and the liftarm.
@thanapornkeawnuratchadasor9318
@thanapornkeawnuratchadasor9318 4 ай бұрын
does the firing pin protrude the breech face?
@bkhoodlum1271
@bkhoodlum1271 4 ай бұрын
Where do you order this
@GregwGa
@GregwGa 5 жыл бұрын
Will this same process work for installing the elongated firing pin in a 75 B SA
@csmith4510
@csmith4510 5 жыл бұрын
What ammunition are you firing? Have you shot wolf out of it?
@danielgodismyjudge
@danielgodismyjudge 2 жыл бұрын
what happens to a great gun when done wrong...dude a carpenter hammer, really ! I hate being an ahole but AHHHH!!!!!
@spikejones-sz3qv
@spikejones-sz3qv 4 ай бұрын
I HAVE 2 CZs p07 and 75 d pcr
@Vikas-fv8rv
@Vikas-fv8rv 4 жыл бұрын
You sure you don’t work at CGW?
@spikejones-sz3qv
@spikejones-sz3qv 4 ай бұрын
WHY CZ WHY ????? JUST MAKE THESE UPGRADES FROM THE FACTORY WTH
@Namesi
@Namesi 5 жыл бұрын
*_C A W C A W - C A W C A W_*
CZ P01 Decocker/SP01 Tactical Complete Disassembly and Reassembly
30:07
Жездуха 41-серия
36:26
Million Show
Рет қаралды 5 МЛН
Counter-Strike 2 - Новый кс. Cтарый я
13:10
Marmok
Рет қаралды 2,8 МЛН
How Deadly Is .380? Is It Suitable for Carry?
15:50
Garand Thumb
Рет қаралды 3,6 МЛН
Polishing CZ75 Trigger Components
7:26
WorkTheTrigger
Рет қаралды 77 М.
CZ P-01 - Friendly Recommendation
19:15
Shazarad
Рет қаралды 10 М.
CZ Shadow 2 Reset issue and fix with CGW parts
11:59
Jason Miller
Рет қаралды 20 М.
CZ-P01 upgrades
6:00
Christopher Winchester
Рет қаралды 14 М.
Cz75 P01 Cajunized 😁
13:04
The Marshall Gun Channel
Рет қаралды 102 М.
CZ SP-01 firing pin came out
4:33
John Jacob Wagner
Рет қаралды 1,8 М.
CZ -75 Compact PCR 9mm Pistol
17:36
sootch00
Рет қаралды 1,7 МЛН
Cajun Gun Works - ANR Styled CZ-USA P-01
10:41
ANR Design LLC
Рет қаралды 84 М.
Жездуха 41-серия
36:26
Million Show
Рет қаралды 5 МЛН