D15b SOHC Bracket and Grid Racer Rebuild series part 1

Lets start with the quest of rebuilding and improving the performance efficiency of this well seasoned D15
For a more in-depth and technical shop tips, dyno etc
Join our channel for lessons like tech and tuning tips
/ @srdmotorsports
We disassemble and inspect everything, this gives us a chance to quickly nip it in the bud if there are wear n tear's that need addressing
I also start the touch ups on the upgraded head that will receive pocket porting TypeR style for added performance and we discuss some possible upgrades too.
as mentioned in the video here is our gasket matching video link here
• Gasket Match or Port M...
Also do check out our earlier circuit racer rebuilds and other sohc projects.
our page is active as we post almost daily stuff we do at the shop check it at
/ srdms2
our Instagram is also active and its still me handling it at
/ ralfsrdms
Tiktok is also active and here it is
/ srdmotorsports
for all business proposals and endorsement deals our page is equipped to handle all talks professionally, we wait for you guys
#D15
#SOHC D15 Track Racer Rebuild Series part 1
#d16z6
SOHC D15 Bracket and Grid Racer Rebuild series part 1
D15b SOHC Bracket and Grid Racer Rebuild series part 1
AEM ems
D15 mini-me
D16z6
Fueltech

[@SRDmotorsports]

Dyno session is here! Full video kzbin.info/www/bejne/iZLcn2WGfMqHmsksi=Pv2xIzH6ZmKVEYwI Episode 3 the first start-up is here! kzbin.info/www/bejne/p6SnqohsZpiZps0si=kEba4aFBBlM97c7X Episode 2 is out now here! kzbin.info/www/bejne/kHSTpZp_fs9gi5osi=Nhlhix7Y1QpcCY4M

[@omar_alanany]

This is it!!!!❤❤❤❤

[@SRDmotorsports]

Yes sir yes sir! 😎

[@StraightOutThaGudda4U]

Single cam head gonna flow like a type r💪

[@SRDmotorsports]

Yessirrrr

[@AwesomeBoss55]

nice - I'm also building a D15 now I wanna use CBR1000rr pistons and modified B18C rods ^^

[@SRDmotorsports]

That’s cool!

[@georgedreisch2662]

For the number of similar engines / heads y’all do, how about making up aluminum or steel templates and install dowels, for consistent port matching, and insure manifold location on installation?

[@SRDmotorsports]

The gasket we make as templates need no dowel but I hear ya on that… We do that on alot of aircooled vw stuff

[@georgedreisch2662]

@@SRDmotorsports fine that “your gaskets” align, but, manifolds typically have some slack in the stud and bolt holes. If dowels were used, head - manifold location, would be standardized, and core shift corrected for, and be the same, head to head, manifold to manifold, instead of each being its own hand fitted combination.

[@SRDmotorsports]

for. 10 bolt intake manifold there is only one spot it ends up on if u factor in gravity… (unless the bolt the manifold while yanking it upwards) but like I said.. I hear what you’re saying… and it’s the same thought why I have the outline of the intake flange into the gasket = ease of alignment when bolting just the intake gasket onto the intake manifold flange, once that’s done? You have to force it to be misaligned when tightening Try it… with a 10 bolt intake flange it only falls one way … can’t really bolt it even half mm to the left or right…. If you could then that’s a crazy flange lol

[@SRDmotorsports]

Now if it’s a 2 stud/hole flange on the manifold like a vw? Yes a dowel is needed

[@thathondadude5974]

is that a po8-3 or po8-8 code

[@SRDmotorsports]

P08-3 but il double check later and correct my comment if it isn’t

[@SRDmotorsports]

It’s P08-3 btw

[@MrBentley125]

have u got a facebook page

[@SRDmotorsports]

All videos have them on the description Shop Facebook page and shop Instagram and TikTok