Bumper Tab Fix - How to Fix Broken Bumper Tab Easily!

  Рет қаралды 427,442

DailyPicks

DailyPicks

Күн бұрын

How to Fix Broken Bumper Tab Easily!
You can buy any of these items used at a local store or on Amazon! (Links listed below)
Rubbing Alcohol:
www.amazon.com...
Masking Tape:
www.amazon.com...
Permatex Black Plastic Weld:
www.amazon.com...
► Thanks for subscribing! - bit.ly/SubDaily...
-------------------------------------------
🔔 Hit the bell next to Subscribe so you don't miss a video!
Follow our Instagrams so you can be updated!
-------------------------------------------
🏆 / 929
Making your life a little bit easier one video at a time.
Daily Picks

Пікірлер: 157
@SmileyK342
@SmileyK342 Жыл бұрын
This saved me likely hundreds of dollars from what a shop would have charged and took all of 40 mins start to finish including drying time. Thanks!
@loveVanity6
@loveVanity6 Жыл бұрын
Is the bumper staying on with no issues? I may need to do this unfortunately
@AshleyGarcia-dr1sw
@AshleyGarcia-dr1sw 3 ай бұрын
@@loveVanity6Same I just found out mine is Brocken so annoyed 😒
@captynrj
@captynrj 3 ай бұрын
This is exactly what I was looking for. I took my truck in a body shop...of course they wanted to replace the whole bumper just because a tab was broken. This saved me almost $2k!
@1Vampire35
@1Vampire35 11 ай бұрын
Excellent! Excellent!! Excellent!!! I'm needing to fix a "faux pas" on my car I just made a few weeks ago and am figuring out how to remove my bumper and fix the tabs that were affected, bend my quarter panel back to it's original shape and reattach the bumper!!!! This is just what I needed!!! Thank you for your idea and explaining it so well!!! Ten thumbs up!!!!
@keno2048
@keno2048 6 ай бұрын
This is all a valid fix, and the only thing I would adjust on these instructions would be to make the hole bigger. Having that bolt tightly held by the bumper cover is going to transfer literally 'all' of the road vibrations directly through that bit of plastic and shorten the lifespan of the repair. A larger hole (allowing more of the vibration to transfer from the bolt to the mounting) would I think, yield a better end result.
@Sheryl-h3w
@Sheryl-h3w Жыл бұрын
That Permatex epoxy is the shiz! Used it to fabricate the torn-off piece of my bumper (reinforced with plastic cut from a can lid + Gorilla tape), drilled out the hole, then bolted that f-ing bumper cover right back where it belongs. Doesn't look like it was ever torn off. Thanks for showing how simple this really is.
@juvenalduarte9695
@juvenalduarte9695 5 ай бұрын
Na orientação de uso do produto...: O adesivo não liga a maioria dos plásticos de polietileno ou polipropileno. O plástico de parachoques, é de qual material?
@rollindeep786
@rollindeep786 Жыл бұрын
Forget the haters in these comments, your a genius considering I needed a a quick and effective fix, and this one was straight to the point and easy to follow.. Respect from the UK
@KuraiKumoStudio777
@KuraiKumoStudio777 2 жыл бұрын
I never of thought of doing this way. Thank you for this video! Cheap and easy fix!
@jasonsims007
@jasonsims007 9 ай бұрын
Cheaper, faster and simplier than any other video watched 👍
@HagakureJunkie
@HagakureJunkie 11 ай бұрын
Make yourself a bit of ABS slurry (mix acetone with abs plastic pieces in a jar), it will bond 10x better than plastic welder. Use a soldering iron to melt in some mesh in the plastic and top it off with the ABS slurry then drill a hole and it's good as new.
@jphearson
@jphearson Жыл бұрын
Exactly what I was looking for. I appreciate this video.
@karadanvers6136
@karadanvers6136 3 ай бұрын
My bumper tore off on a concrete parking stop bc it was broken and had rebar sticking out. Anyway I used your method and it’s worked out so far. Hasn’t fallen off yet! The dealership would’ve wanted so much money. My tabs were broken but I just sealed the whole bumper anyway and sealed all the gaps. It’s holding so far!
@kaitlynhickman2987
@kaitlynhickman2987 Ай бұрын
how long has it been? is it still holding by chance? the same exact thing happened to me with the rebar sticking up out of the parking stop. my bumper has been hanging off a tad bit for a year or so and i’m tired of popping it back in every time i drive 😅. def considering this trick
@karadanvers6136
@karadanvers6136 Ай бұрын
@@kaitlynhickman2987 it’s held for a month or two. It’s great 👍
@raymondkhan2709
@raymondkhan2709 2 жыл бұрын
Not all Heroes wear capes. Thank you
@peterl.104
@peterl.104 2 жыл бұрын
This one wears a cap.
@trutrek913
@trutrek913 Жыл бұрын
My wife just damage her bumper off of a high curb. This will come in handy for sure. Awesome!
@نيكشهداءالكراغلة
@نيكشهداءالكراغلة 24 күн бұрын
Depends on the outside temperature
@ryanhensley146
@ryanhensley146 2 жыл бұрын
That was brilliant. Well done.
@SooperToober
@SooperToober Жыл бұрын
NICELY DONE ...and well explained with awesome camera work. Exactly what I was look for....best explanation
@TheOlveraFam
@TheOlveraFam 2 жыл бұрын
He said u wanna let it dry for 20 minutes to 1 hour, but we let it dry for 15 minutes only. Lol 😂
@aznnp77
@aznnp77 Жыл бұрын
I used JB Weld. Didn't get hard for 2 hours. Didn't strap it in until 24 hours later.
@juvenalduarte9695
@juvenalduarte9695 5 ай бұрын
Que produto é esse?
@vqcertifiedd777
@vqcertifiedd777 25 күн бұрын
@@aznnp77it worked pretty good?
@adrianh9851
@adrianh9851 Ай бұрын
Excellent!!! This is a low cost-effective fix.
@wesfields9322
@wesfields9322 Жыл бұрын
Not all heros wear a cape, but all of them know how to use tape
@andycharles1180
@andycharles1180 2 жыл бұрын
Bruh, I am freaking impressed. Good job bro.
@f-puppet
@f-puppet Жыл бұрын
Thanks for this video. I'm gonna try this on my scion. Bumper keeps falling off from one side only. It's a pain. I'm curious, how's your fix holding up after all this time?
@omega4568
@omega4568 Жыл бұрын
I used alcohol at 50% and epoxy. Do you know that I had that epoxy in my storage, but never thought to use it like this! Thank you for your video I realized that this was the solution to repair my 2006 Mazda 3 bumper cover edge.
@themirror6980
@themirror6980 Жыл бұрын
Thank you this is exact the solution to i was looking for to fix the front bumper of my car. Love the content.
@ambrosiajimerson4808
@ambrosiajimerson4808 Жыл бұрын
Did you fix it ?
@tradewithwan
@tradewithwan 2 жыл бұрын
I have this issue with my Q50 as well lol passenger side. My wheel setup isn’t even aggressive it’s crazy lol Great video
@adamowens5507
@adamowens5507 Жыл бұрын
i have a 14’ 400 hp taurus i’ve only done highway driving with , a lot of it. i can’t keep the front of it together for the life of me and the car sits pretty high. having new plastics put all under engine bay just buying an entirely new bumper because truckers have chipped the h*ll out of it . rest of the car flawless . Passenger side front bumper sticking nearly an inch out just zip tied lol can barely notice but still looks wack to me. 255/45/19 all season nitto
@laureenmaynes6178
@laureenmaynes6178 Жыл бұрын
Going to try this on my 7 series until I can replace the bumper. Thanks for the quick fix idea!!!
@R.A.N.B.I
@R.A.N.B.I 7 ай бұрын
Research has been studied over now its time to get to work excellent video and work
@brettatenciorn8522
@brettatenciorn8522 Жыл бұрын
Good job, out of the 8 videos I watched before, yours is the only one that makes any sense. Thank you
@pokemonmaster4544
@pokemonmaster4544 Жыл бұрын
Saved me hundreds of dollars thanks
@tlcassel
@tlcassel Жыл бұрын
This was incredibly satisfying to watch!
@jorgetrevino5757
@jorgetrevino5757 2 жыл бұрын
I fix mine with a plastic repair tool using one of the metal clips and also the convinient is clip is bendable sometimes the bumps are sand down and don’t hold anyway with this idea and with clip you can bend it up and it hold it or sand flat the bump and use a little screw small enough to fit on clips head
@alimanki2869
@alimanki2869 Жыл бұрын
My clips bugged me soo much i wanted to replace the bumper 😭. Thanks ❤
@boydmking1
@boydmking1 10 ай бұрын
Nice job and a video that shows it all - so anyone can do the same . . . bravo!
@udaproductions2
@udaproductions2 Жыл бұрын
Good video, thanks. Why not put the plastic permatex under the plastic so you don't have to sand away later?
@pchidester923
@pchidester923 Жыл бұрын
It wouldn't be flush to the other tabs
@twpaq9332
@twpaq9332 Жыл бұрын
Makes me wonder what would work better, the bonding agent or getting a plastic welder and going that route?
@rhoodj
@rhoodj Жыл бұрын
Thank you. I need that plastic welding home. I have some fender lin😮ers tabs to repair.
@lazmotron
@lazmotron Жыл бұрын
Great solution thanks, thanks. Just what I was looking for!
@Onebug6
@Onebug6 5 ай бұрын
Thank you so much this blew my mind
@andyirons7162
@andyirons7162 Жыл бұрын
DUDE ------------------> you are a legend! Thank you
@aznnp77
@aznnp77 Жыл бұрын
Oh, so you guys basically did what I just did. Except I used a metal washer, and JB welded around it. If that falls out I'll try this. Thanks, I didn't wanna buy one of those tacky bumper quick releases. I'm too old for that kinda shit. Oh I lost the screw and that white thingy to screw into, so I just used a cable tie. It doesn't work perfectly, as if I hit a bump it maybe comes out 2mm, but it works.
@ermac321as
@ermac321as 2 жыл бұрын
Grat work bro, you to used fibee glas to have more harderer
@jacquelinestoffey246
@jacquelinestoffey246 3 ай бұрын
What size wrench did you have to use to unscrew the screw ?
@Donkern621
@Donkern621 3 ай бұрын
Great Video Thanks 👍
@21972012145525
@21972012145525 Жыл бұрын
That looks really good. I have no idea what you actually did though lol
@jermainebennett7473
@jermainebennett7473 Жыл бұрын
Freaking brilliant dude. I’m going to do this today!
@chocolate_chipp_00
@chocolate_chipp_00 Жыл бұрын
How did it go?
@Try_It_With_Pru
@Try_It_With_Pru Жыл бұрын
Exactly what I need.. thanks
@HrshReyalitee
@HrshReyalitee 2 жыл бұрын
Can I put W4 on a pen to keep a hole while pouring?
@Sheryl-h3w
@Sheryl-h3w Жыл бұрын
Effing brilliant! Wish I 'd seen your comment before I panicked, realizing I didn't mark where I needed to drill. It turned out great after all, but I hate that panic!
@curtisdixon2137
@curtisdixon2137 3 ай бұрын
Nice job...thanks!!!!
@EddyG
@EddyG Жыл бұрын
Super good idea. Thanks
@DonaldJackson-r4r
@DonaldJackson-r4r Жыл бұрын
Did you just drill into the dash with the provided hardware? I don’t want to mess anything up on my truck
@maishathebudgetingmom
@maishathebudgetingmom Жыл бұрын
God bless yall !!!❤
@joxosea
@joxosea 8 ай бұрын
Thanks for this video
@kennetheady1347
@kennetheady1347 Жыл бұрын
TY so much Sir. I do okay sometimes with mechanical parts but, I know nothing about body work. I hit like and I subscribed to you sir. I will share your knowledge. God bless you 😉
@jjorr1
@jjorr1 2 жыл бұрын
I hate the q50 bumper issues I have this on my driver side as well then other day my turn signal where place a screw threw broke so now I'm stuck figuring out to keep the turn signals from moving
@subz6739
@subz6739 Жыл бұрын
The only issue I got is the plastic part which my bumper is supposed to be attached to has fallen off. There is no stable base I can really attach it back onto. Maybe I can glue the bumper onto the upper panel but I’m worried I will look weird with no gap in between. I can’t afford a whole new bumper so that’s my best option for the current moment.
@abc33944
@abc33944 Жыл бұрын
never thought about this way,, nice one!
@gemmaedwards249
@gemmaedwards249 Жыл бұрын
Thank you so much your video was really helpful.
@Dylanset15
@Dylanset15 Жыл бұрын
Besides this method how else can I get it fix ? At a body shop?
@therealjordi317
@therealjordi317 Жыл бұрын
Life savior !!
@texasmethod
@texasmethod 8 ай бұрын
Thank yoj don't know why I didn't think of this
@mikewilliams8001
@mikewilliams8001 11 ай бұрын
nice tip bro!
@jsj31313jj
@jsj31313jj Жыл бұрын
Nice job!
@davidmoreham3505
@davidmoreham3505 Жыл бұрын
Can I do the same way, for a Nissan Altima?
@Nyck461
@Nyck461 Жыл бұрын
Very good job. The filling material that you used is harder or the same as the car bumper?
@mekonnenkahsay4319
@mekonnenkahsay4319 Жыл бұрын
I didn’t know they plastic adhesive exist than you for the educational video
@y2muas
@y2muas Жыл бұрын
Awesome! Never would of thought of this. Thanks so much!
@UserCalledQuest
@UserCalledQuest Жыл бұрын
That was 👌 awesome work.
@omegalgo297
@omegalgo297 Жыл бұрын
Thanks!!!
@mayhemw.6122
@mayhemw.6122 Жыл бұрын
Mind blown. really, wow
@Jess-wq4gd
@Jess-wq4gd 2 жыл бұрын
This was such a great vid, thank you
@owbf5758
@owbf5758 Жыл бұрын
Good looking g
@user-sn9oy2or2n
@user-sn9oy2or2n 2 жыл бұрын
Where you locaaated?
@yoboikyler1268
@yoboikyler1268 Жыл бұрын
Thank you tried zip ties n was tryna hid it and it just wasn’t looking right
@hassenn6960
@hassenn6960 Жыл бұрын
Not only was it a great tutorial it’s the same car I need to work on
@menguardingtheirownwallets6791
@menguardingtheirownwallets6791 2 жыл бұрын
Why not just use a zip-tie? You pull away a bit of the wheel-well cover so you can get access to inside the quarter-panel, and you insert a zip-tie to where one of the bumper clips used to be. You then thread the length of zip-tie into the matching hole on the bumper, and then pull the rest of that zip-tie back to the hole of the zip-tie, and insert it into the tie, then pull to tighten the zip-tie and that loop of plastic then pulls up the bumper to the car's quarter-panel.
@alejandrogonz6081
@alejandrogonz6081 2 жыл бұрын
Make a video I’m too dumb 😝
@lilark4201
@lilark4201 2 жыл бұрын
@@alejandrogonz6081 felt
@MrMetalHead1100
@MrMetalHead1100 2 жыл бұрын
if the clip is broken whats the zip tie going to hold on to? lol
@annagraham6204
@annagraham6204 2 жыл бұрын
Exactly. You’d have to drill new holes and it wouldn’t line up properly giving your bumper cover a wonky eye.
@jeffreypitts2985
@jeffreypitts2985 2 жыл бұрын
good job
@passthesriracha4765
@passthesriracha4765 2 жыл бұрын
good video but plastic weld hasn't dried yet and it's been 5 hours...
@fila968295
@fila968295 2 жыл бұрын
Use a heat gun
@Hustle2Succession
@Hustle2Succession 2 жыл бұрын
How long did it take ?
@passthesriracha4765
@passthesriracha4765 2 жыл бұрын
@@Hustle2Succession let it dry overnight and it didn't dry... must've not mixed it well so I just actually plastic WELDED it with this tool
@LuisMorales-fv1rk
@LuisMorales-fv1rk 6 ай бұрын
Theres 2 types plastic bond one is faster from another
@zulfaezsabri5908
@zulfaezsabri5908 2 жыл бұрын
Ahhhh so nice
@kevinmetcalf6371
@kevinmetcalf6371 2 жыл бұрын
Good job bro
@MIDNIGHTMOONSH1NE
@MIDNIGHTMOONSH1NE Жыл бұрын
Just fucked up my Alfa Romeo bumper. Just bought the damn thing today. Cut too hard backing out of the driveway like a shit bag
@deevick4270
@deevick4270 2 жыл бұрын
Can I use it on a crack bumper?
@Dragon-Slay3r
@Dragon-Slay3r Жыл бұрын
That's a concrete block right is straight and left is bent towards @ 7 o'clock aka huge dark block
@palmsofdestin1
@palmsofdestin1 2 жыл бұрын
Is there any audio on this?
@EthanReadsHisBooks
@EthanReadsHisBooks 2 жыл бұрын
Couple problems with this fix. One of which is not sanding the surface of the plastic. The other being that the paint on the surface hasn't been addressed. It won't hold long term.
@sergioestrada9185
@sergioestrada9185 2 жыл бұрын
Yes it will hold I did this to my car samme thing and I have years on it
@Cgl3g3nd
@Cgl3g3nd 2 ай бұрын
You could just connect with the epoxy and it dry together no need for the drill.
@rodrigohernandez4422
@rodrigohernandez4422 2 жыл бұрын
Genius
@kickz_world8579
@kickz_world8579 Жыл бұрын
It's crazy how I'm looking for the samething for the same car 😂
@realhastalamuerte303
@realhastalamuerte303 Жыл бұрын
Tell me about it I have my Sport bumper hanging off one side 🙄
@luisc2435
@luisc2435 2 жыл бұрын
Could I use JB Weld plastic binder for this as well ?
@alejandrogonz6081
@alejandrogonz6081 2 жыл бұрын
Yes JB weld is really good
@rolandorivera427
@rolandorivera427 4 ай бұрын
🔟/4
@vqcertifiedd777
@vqcertifiedd777 25 күн бұрын
crazy thing is i gotta do this for the SAME EXACT car😂😂😂😂
@mostafaelgamel6415
@mostafaelgamel6415 2 жыл бұрын
A M A Z I N G
@RobbyJHope
@RobbyJHope 25 күн бұрын
What in the makita is going on there that thing is albino
@TheLoneRanger1992
@TheLoneRanger1992 2 жыл бұрын
anyone know something in uk that’s like this as I can’t find this product in uk
@rollindeep786
@rollindeep786 Жыл бұрын
I ended up buying mine from the US and had it shipped, the closest thing to this in the UK is jb weld.. But I just bought this product and waited as atleast I saw the result of how to use from this video and didn't want to risk trying a different product which may yield different results.. Very useful video tho so respect
@TheLoneRanger1992
@TheLoneRanger1992 2 ай бұрын
@@rollindeep786did it work?
@Steve-O_FPV
@Steve-O_FPV Жыл бұрын
Breaks easy.
@on-site4094
@on-site4094 Жыл бұрын
👍
@ZammianX
@ZammianX 2 жыл бұрын
recently got a car with this job done to it & let me just say, it’s awful. Zip ties would’ve been 100x better.
@DanielGarcia-rz1td
@DanielGarcia-rz1td 2 жыл бұрын
How’d you do it
@stevekeyes9402
@stevekeyes9402 10 ай бұрын
This stuff is $4.00 at Menard's... if you have one nearby.
@mrxXxkink
@mrxXxkink 2 жыл бұрын
At the end of the video I noticed that I have the same car but in white
@sergiodoordie319
@sergiodoordie319 Жыл бұрын
Use ur tip of ur finger to smooth it out bro
@mr.navarr9177
@mr.navarr9177 4 ай бұрын
I'm here because of my Q50 😂
@deborahconnolly4317
@deborahconnolly4317 2 жыл бұрын
The volume was no high enough to hear this :(
@peternolan5632
@peternolan5632 Жыл бұрын
Oh god what happened ?
@owbf5758
@owbf5758 Жыл бұрын
Them damn q50 bumpers my knees are tired of fixing it
Which Epoxy is Best for Plastic?  Let's find out!
11:39
Project Farm
Рет қаралды 2,3 МЛН
How to fix broken bumper cover tab with paper clip and heat.
4:00
happywrenching
Рет қаралды 693 М.
А что бы ты сделал? @LimbLossBoss
00:17
История одного вокалиста
Рет қаралды 6 МЛН
Life hack 😂 Watermelon magic box! #shorts by Leisi Crazy
00:17
Leisi Crazy
Рет қаралды 78 МЛН
Car Bumper Repair by Yourself at Home !
8:03
Reparador 101
Рет қаралды 2,7 МЛН
How to Fix Your Bumper - The Easy Way
5:39
YourCarAngel
Рет қаралды 1,6 МЛН
How To Fix Lexus ES Front Bumper [4K]
7:33
fgeop
Рет қаралды 27 М.
Bumper Cover Repair - How to Repair Broken Slot Tabs
7:50
Polyvance
Рет қаралды 1,1 МЛН
How to Repair Scratches on your Car | Save Hundreds of Dollars
6:22
Thomas of All Trades
Рет қаралды 8 МЛН
How To Install Quik Latch Bumper Quick Release + Review (Super Easy!)
5:14
How to repair damaged clear coat AT HOME! with SPRAY CANS!
13:36
⚙️Homie Hektor⚙️
Рет қаралды 5 МЛН
HOW to fix BROKEN "PLASTIC" ONCE AND FOR ALL 4 cheap !
6:51
Sweet Project Cars
Рет қаралды 610 М.
А что бы ты сделал? @LimbLossBoss
00:17
История одного вокалиста
Рет қаралды 6 МЛН