How to Install Quick Release Bumper Fasteners

All-Fit Automotive Link: allfitautomotive.com/all-fit-b...
This KZbin Channel: / @milanmastracci
SickDips KZbin Channel: / @sickdips
______________________________________________________________________________
** I DO NOT TAKE RESPONSIBILITY FOR YOUR VEHICLE BEING DAMAGED ** THIS IS FOR ENTERTAINMENT PURPOSES ONLY **
If you do not choose to get touch up paint, your steel fender will rust given an appropriate amount of time, especially in environments where Salt / Road deicing products are used as they will accelerate the rust process. I STRONGLY recommend spending the 20 bucks or whatever it costs to get some touch up paint.
Don't forget when you drill into your bumper and fender, MEASURE TWICE, DRILL ONCE
______________________________________________________________________________
Things You’ll Need
The Quick Release Fastener Kit
1 x 1/4” drill bit
1 x Electric drill
1 x 3/8 Socket
1 x 5/32” Allen
Some Masking Tape
Necessary Tools to Remove Inner Fender
Touch up Paint
If you guys have any questions, please feel free to post in the comments below.
______________________________________________________________________________

[@hekthic]

I drilled a hole through my tire

[@swingking08]

Probably don't work on cars then

[@EbolaSquirrel]

ehh its fineee

[@Josh-zy3lq]

LMAO

[@whatistime5768]

Your doing it wrong bro... you have to drill a hole through the engine, not the tires

[@LaloVega21]

Why am I laughing so hard at this 😂

[@KalvinTheChuffleMan]

3:17 “ it’s gonna be in this genital area “ 😂😂😂

[@JesusMartinez-xf8rs]

That shit took me out 😭😭😩😂

[@ndk2k4]

If I put this on my Mustang, will I be more effective when ploughing through crowds?

[@milanmastracci]

+ndk2k4 ABSOLUTELY :)

[@66Tinchoo99]

lol

[@hawkeyestiguy]

😂😂😂

[@americanpanzer4163]

I would also recommend quick release front fenders and a quick release hood to to hide the damage

[@silkboxing4454]

I installed these on my Ex Girlfriend"s •Dairy pillows• when I use to slide my "one eyed yogurt slinger" between them !

[@Slrce]

i’m so late, but this was actually one of the most educational videos i’ve seen, super well explained, very clear, and from what it sounded like… you knew exactly what you were talking about. amazing.

[@jovalleau]

Thank you SO MUCH for this video. I know it's 8 years later, but still. I just bought and painted front and rear bumpers for my car, and though the fit is good, it's not factory, and I got some of these fasteners to tighten everything up, but they did not come with instructions, so this was exactly what I was looking for. Thanks again!

[@jrmyzero]

Been thinking about these for a while, old mount points broke and I've used bolts with nuts, but removing these are a pain, so these are going to make more sense

[@RabidChimp805]

Excellent video. I've been searching for a diy on this very subject. Thank you.

[@lancetenhoopen1006]

Nice job. Agreed with Lawrie below. Also, you might want to mention you didn't paint the plastic bumper with touch up, not a big deal but it stuck out considering you did such a great job detailing the reasoning behind the touch up paint on the metal fender.

[@hawkeyestiguy]

Great install video. 👍🏻 Personally I like the clean appearance of Quik-Latch fasteners, but this is a great install vid none the less. Very detailed & well presented. Just subbed! 👍🏻👍🏻

[@monyaseymour6211]

This is a quick and easy extremely inexpensive way to solve my front and rear passenger bumpers POP off, eliminate tape and no expensive replacement, this car will be with me until it can not be repaired. 2011 ford fusion this car has been so durable, we went thru a high hilly pastor, like the Dukes of Hazzard not a scratch just those 2 spots of bumper popped off that's it. (It was an accident, ran off road)

[@Rudeboymo]

Very good video. Straight to the point, easy, and thorough!! Good job 👍

[@edcashwell5723]

Great video, I wasn't a fan of these, but then you mentioned the fender gap, a lightbulb went off!! Nice job!!

[@milanmastracci]

+Ed Cashwell Thanks Ed!!

[@a.c.jimenez8274]

You forgot to mention that, u MUST be careful when drilling because the bit is going to want to slip and leave a nasty scratch. So I would recommend by drilling slowly and let the drill do the work. Don’t apply too much pressure

[@dsmchick935]

Cool video, you did a good job I may want to get these for my Eclipse when I drop it on coilovers

[@joshuaravel]

Awesome I've been looking for these for a while... thank you so much!!!

[@ruthannwalker5585]

Wow you explsin things plainly to the point. Thanks

[@carlmeaux3518]

looks like you dented the fender putting that much pressure on the drill

[@Sp4rks]

Carl Meaux yeah wouldn't you want to use a stepping drill technique?

[@RAF92Warhawk]

Yes, I would drill it with a much smaller bit first for better accuracy. It's also a good idea to de-burr the hole so there isnt any metal shards interfering with the fitment of the washer/ bolt. Also, like Carl said... way too much pressure on the drill. When the bit fell through, he put a huge dent in his fender, which was visible for a brief shot in the video. It's a small mistake, and the actual quick release probably covered most the dent, but it can be easily avoided by just modifying the technique while drilling.

[@ieatass6463]

@@RAF92Warhawk lmao who gives a fuck its a crappy focus

[@thesteezylifeofdrew]

Nice video. Good quality, very understandable, and to the point. Helped me out a lot!

[@milanmastracci]

***** Glad to hear :)

[@ponkaninparallax]

Thanks so much for this vid. Helped me install my bumper back on that's snapped all its plastic clips due to the steep parking garage I use for work.

[@user-ew7lx1kd4x]

Bro best video on this install I watched it and added 2 on each side and I’m so damn hyped thanks a bunch! It’s first time ever modifying anything and I’m a very feminine girl I didn’t even break a nail!

[@TheRoadtoFinalLight]

Great Job. Very precise explanation. Thanks.

[@sethschneider1504]

the fact that you did this just for looks gives me a migraine

[@kanyewestlegoguy7443]

Seth Schneider for real Hahahaha I’m over here learning how to put these on to keep my fucking civic together 🤣🤣

[@julianpat6146]

I’m doing this to my e46 because the bumper is sagging and it’s slammed

[@biggaywizard]

You've never been to Japan and seen Japanese car culture have you?

[@HIGH_AF914]

@@kanyewestlegoguy7443 😂😂😂 me to

[@daviclemons6910]

Well if he ever did wreck the front of his car he wouldn't have to worry about the bumper falling off in the process.. 😅

[@LifeIsOrigami]

Does this give me + 43 hp?

[@uhZeny]

45*

[@Norrr3]

Depending on the car n/a 25 whp and with forced induction it’s good for 50+

[@MrTiggerr84]

Thanks-great video great speaking voice. I've been trying to figure out what to do with my 02VW jetta front left bumper now I know how. 👍😊

[@HoaPham-zs1mh]

Omg yes, I didn't know this existed. I have a gaping bumper and this is perfect!

[@milanmastracci]

Hoa Pham This will fix it 100%. Make sure you stretch the second fastener far enough so you have a tight fit and it brings your bumper up

[@modernsportscarsofarizona7559]

Thanks for this. It’s what I’ve been looking for.

[@pollardi]

Thanks for the video!!! Just ordered a set through your link!!

[@MA5TAM1NDPR0DUCT10NZ]

Well done very descriptive amd straight to the point..new sub

[@mercyrain89]

Thank you! Great help and great video!

[@hpitty1]

Made it so simple. Thanks!

[@fedrick77]

Very helpful video two thumbs up

[@s.lawrie8466]

First of all, great vid m8. Was looking to see what these look like on different cars. They look good on the Focus. Secondly... and I hate to sound all critical... But you shouldn't apply that much pressure when you're drilling paint work, more specifically metal work. You can even see in the video that the panel was flexing, and left a dent after the drilling. There is no reason to do that. Just let the drill bit do its work, without excessively forcing it into the metal. Pressure applied should be dictated by the strength and hardness of the material. For the most part (on bodywork at least) a lower pressure should be applied. I see people forcing drills into material all the time, achieving nothing other than making the drill bits slip in the chuck, doing damage to the material or drill and making everything overly hot. Also, just an idea, drill a smaller pilot hole first to reduce the potential for slippage and denting of the metal.

[@supremius]

lmao i realized this the first time when i saw that drill slam tge fender i was like oh yeah you got it good and later on i seen the dent 😂

[@jatiyo543]

+S. Lawrie and debur the hole with a duburring bit or larger size drill bit once the hole is done.

[@lancetenhoopen1006]

Thanks for adding that information. I was thinking the same thing but you articulated it very well. +1

[@erickp2027]

Saw your video & ordered immediately

[@GogogoFolowMe]

I recommend to use a smaller drill bit to begin with

[@Megaman8707]

Easy and informative. Thank you

[@thelofipanduh8589]

Straight to the point. - thanks dad

[@NHSSHINOBI]

Great video, was easy to understand, thanks

[@aldo3741]

gotta say looks way better now man 👌

[@abdelmajedmohammed5263]

Very helpful, thank you!

[@alanford9811]

Perfect video very thorough, I don't know why you got so many dislikes lot of haters i guess,best video I watched out of numerous of ones, good job buddy!

[@youngruble1755]

This was a really good video thanks

[@gerald-oo-seven7014]

Great job dude!

[@JK-zu3lp]

Thanks for the video!

[@monicas8784]

Thank you for this video!

[@harshayedayal5209]

Very helpful bro thanks

[@SMEGEL145]

Do you think this would be strong enough to to hold the bumper to the fender without any other things supporting the bumper?

[@gustavomelendez3477]

Great myfriend, thanks!

[@KyleHertelVlogs]

this focus is no longer alive. a friend of mine purchased it, and it was unfortunately wrapped around a pole. i own that front bumper though and the grille.

[@user-qj2cq4dv3k]

Noice

[@cam-den]

love the hellas

[@havenmaltry4517]

Wanting to know, if I already have a replacement bumper, and just want these on, will it be strong enough to hold? And secondly? The bumper doesn’t have to be on to install correct?

[@jordanparker8359]

Good video man thanks

[@ghosthxer7301]

How does that make removing your bumper easier? Can you make a video of you demonstrating the removal of the bumper after you've FULLY set it up for quick removal? I have a car I bought a 10 piece kit for because I am certain that these are the fix to my hanging bumper. The clips and lining where you put the bumper attachment screws and plastic inserts in are all messed up. I'm going to hammer out all the dents as good as I can and then I'm gonna try to see if this is going to be a good fix by just hanging the bumper to the fender. I will also be doing a video

[@Contract32Killa]

It's so funny to see these range from $3 to $65.... I picked up my set for $4.99 shipped of eBay. I can't imagine the suckers who spend $65 for these things lol

[@FujiShiina]

Same people that spend most of their money on "real" wheels and think it makes their car better

[@gagepetas7748]

Fujiwara Shiina u realize that wheels and price do matter due to the shape and weight right smh. Don’t pretend to know something if u don’t

[@FujiShiina]

@@gagepetas7748 i had 3k+ wheels, now i have rota's my rota's are lighter n stronger... Hmmmmm...???

[@gagepetas7748]

Fujiwara Shiina lmao your car is worth what 2k tops stop it lmao my m3 e46s body kit is worth more than your whip lmao chill out

[@FujiShiina]

@@gagepetas7748 ok big boi, my coilovers are 2k on it's own... The car was 1500 as scrap that did not run or even have any interior in it. It goes for 7k+ anyone with a build corolla can confirm it's fcking expensive to drift them

[@chrissy6321]

Thank for the video

[@leekybandz1599]

Aye bro so I have a clk500 and I’m going to be getting a custom after market bumper but I don’t want to have to add brackets and all that extra work you think if I add these quick releases it will hold up with just the quick release set up or?

[@mkiss879]

it hurt me a Lil to watch him just drill his fender like that

[@chriselson7268]

Yes I agree. He should have started with a smaller drill bit first and took his time. The final size should have been even slower to allow the metal to acclimate to the heat and pressure of the bit.

[@fachinimichael]

It's a focus... Lol

[@ieatass6463]

Who cares.

[@jzxwood]

Thanks! Going to install on my car right now. There was no instructions.

[@jzxwood]

The process was simple. Just measure accurately and make a template before you drill in place! Quick releases make a nice touch on a vehicle!

[@Bigshockd]

Outch! Huhuhu i need to drill my flawless panel to fix the bumper huhuhu

[@royaltrunks8003]

🥲🥲🥲

[@ross8270]

I bought some of these and I installed them like you said but when I do the screw takes some of the dried touch up paint that's in the hole of the exposed metal off , is that normal for installation or am I doing something wrong ?

[@dmw2132]

Thank you! Someone backed into my mum van so the bumper flaps in the wind. I saw these on someones slammed r32, thought I can be cool again so added them to my sad looking bumper 😂 son still reckons im not cool tho haha

[@bergon22]

Great video

[@a.n3947]

u make gud videos mate gud job perfect for learners

[@milanmastracci]

+Islam for everyone Thanks man :) Glad you like em!!

[@braisonbalthazar]

The number one reason is not looks the number, it’s because when you lower your vehicle it makes it much harder to jack. So you make it quick realize to get more access to a lift point. If the fender liner is installed does that mean you have to take the fender liner off everytime ou wanna take the bumper off ?

[@nelsonjaneiro5543]

Thank you good video👍

[@dannyboii541]

My rear bumper fell off, do you think these quick release fasteners will be able to hold it up, atleast till I buy a new bumper

[@lmh-mv3ec]

Hi is this fastener good for PU material bumper? because i wanted to remove my bumper to fit in a turbo kit but the machanic that installed my aftermarket bumper warn me that the bumper might crack if they remove it... so was thinking if this would do the trick after i remove it. Thanks for the informative vid.

[@Manny325s]

Nice video really helpful.

[@milanmastracci]

I'm glad!! :)

[@jackmeltsner437]

what do you use the 3/8 socket for?

[@Hopzy0]

Could I use this for my rear bumper? I was towing and accidentally jack knifed my bumper and it stick out alittle bit. Could I use this method?

[@davidtrezelle208]

Question i think my bumper might be missing some clippings correct me if am wrong but it may be the reason why my tire seems so close to the bumper and when i turn mid left my right tire touches the fender a lil can this help me with raising my bumper a lil so i can have a lil more tire room ?

[@kittymartin2982]

QUESTION: My bumper is already separated somewhat from the fender. Will this item work to pull bumper closer to fender? Thanks for your video

[@garbajful]

wait did you just install that for looks cuz I didn't see you actually "quick release" your bumper?

[@LaydzGaming]

Would this also work for a fibreglass bodykit? Not sure if the pressure would destroy it?

[@Revolver1991]

Thank you!

[@magnificent10304]

Hmm, I've an aftermarket body kit, i can really use this as now I have to remove my CAI and battery to get to two very hard to get to bolts, but I dunno how this would go with fiberglass... if it would just crack it or not.....

[@Blackeyemofo]

If your bumper is hanging a little and ya need to bring it up, would it be better off to start on the bottom and then pull it up

[@2000zx3sct]

I parted out this car like last month haha that's crazy .

[@EyasAZ]

hi, am just wondering, do you do any videos on engine tuning??

[@johnjaworski7673]

gonna do this today!

[@XxGreenBeXx]

My first thought: this is extra af you don’t need it After watching this vid: I would give it a try

[@mistermartinez14]

Nice video brother

[@vw4bigryan]

Thanks!

[@erickmarte5294]

Ok but how is the video quality this good and the presentation being an 8 year old video

[@ryanm7449]

Will this help if my bumper clip broke? My bumper side by the fender line flaps when driving on the highway

[@_blazin_asian]

Man, you don't push the drill through. I've always entertained the good 'ole christmas tree bit especially for the metal fender, the plastic bumper doesn't matter as much.

[@breneeewing8142]

Do they help with the gap between the headlight housing and the bumper?

[@Zephieish]

Surprised this guy still posting videos since whiplash casting.

[@jacksonvang3429]

Nice video

[@ScreamerPipeTurbo]

finally a new video

[@milanmastracci]

Yeah I've been super busy with school! Finals are almost done so I'll have some more time to make some videos :)

[@goodvibesonly1920]

Thanks bro

[@kevlinarchary3209]

Sorry guys so do you still.need to have the rest of the screws in the bumper ? Looking for a way to permanently remove all screws and have the bumper quick release off my polo any ideas or advice ?

[@canitopollito]

Good looking

[@syednayeemali5590]

Thanks boss

[@Jesus-in3oz]

Thank you! I love your videos, keep it up :)

[@jadendg6154]

good video bro

[@Miikecash27]

Nice focus I gotta ZX5 hatch

[@dannyturver9633]

I'm going to try this in the next couple of days so it gives my bumper more support due to it been a bit loose, before I try this will it give my bumper the extra support it needs? tia

[@HAUNTS360]

Its also to hold the bumper after cutting the joint that stick out on the inside so the tire doesn't rub on it.

[@toyotacorolla2395]

I want to put some of them on my 98 Corolla 👍🏻

[@mrcoffee315]

Look people that’s for when your clips that hold the bumper breaks off or you have a title bad fitment on your bumper and fender so you put it to pull it up and reduce that gap

[@jasonwilliams6087]

You should mount them to where the band / ring is a figure 8

[@sjurbanexploration2130]

Not really you can do that after with the O ring