Daisy Powerline 880 7880 BB Gun Reassembly, Putting it Back Together Step by Step Air Rifle

www.Diasy880.Net Parts & Information About the DaIsy 880
The reassembly of a Daisy powerline 880 from individual components. Step by step. Complete parts selection available at my website:
www.Daisy880.Net

[@Alanheal]

The Daisy is an extraordinary rifle. One thing that's often not mentioned is the ease of pumping. You just don't find that in other guns. Also, the accuracy is as good as you will find in the most expensive guns. I've taken apart Daisy 880's but never seem to get them back together again. I appreciate and admire the skills of those who can do it. Thank you for these videos and your obvious appreciation of this wonderful gun.

[@JL-by4xu]

I agree, it is a well put together little gun.

[@wadeshad]

Thanks a million! You just saved my butt. My grandson put BBs behind the bolt of our brand new 77XS, and jammed it. I'm not mechanically inclined so when I took off the outer covers, the pump handle retaining spring fell out, and I had no idea what it even was or where it came from. Then the safety fell apart. I was lost. The whole thing was junk to me after that. After viewing your video, I completely reassembled the gun and it works!! Thanks so much.

[@JL-by4xu]

That is awesome, glad the video helped.

[@travisogden1661]

Bought your kit on ebay, and using your videos I was able to get another of these back up and shooting in just a couple of hours. There were a couple of tricky parts, but I prevailed! The gun was my brother-in-laws who passed away 20+ years ago. My wife and her mom will be happy to have his old gun working again, just for sentimental reasons. Thanks for the help!

[@JJ-gd7gf]

With the help of your two disassembly and two reassemble videos I was able to tear down, clean, remove rust, paint, replace seals, and reassemble my old style 880. Thanks for sharing!

[@JL-by4xu]

Thank you, glad I was able to help

[@dschenk952]

Very good videos for working on the 880 or 901. Thanks. The main reason I took it apart was because it was shooting 4" to the right and I was trying to figure out why. Never did, but I did get it tore all the way down and back up. Thanks again.

[@yoitired]

Thanks man, couldn't have done it without your vid, life is too short to not have an 880!

[@lamardaniels6625]

GREATLY APPRECIATED!!!...Got cleaning cloth stuck deep in barrel, had to take apart. Was confused, but this video assist me along the way to disassemble back k to assemble.. ..She's back together now!...THANKS FOR THE TUTORIAL

[@JL-by4xu]

No problem, glad it helped.

[@paulhornsby3265]

The best tutorial on the daisy 880 reassembly. Thank you.

[@davidjeromedawson]

Thanks for the assist. Bought the rebuild kit from your Amazon site and it went pretty smoothly. Just like new now.

[@JL-by4xu]

Good deal

[@travelndan]

Any tips on how to get the Pump piston assembly back together with a new Buffer? How to compress so I can the pin back in?

[@JL-by4xu]

I don't advise it. Takes a vise or a press. Easier to buy the complete assembly.

[@jdr8050]

Thanks very much. The video was easy to follow and helped me a lot. My 880 is better than when I bought it.

[@JL-by4xu]

Good deal, thanks

[@danielmurguia3428]

This is exactly what i was looking for thank you so much, that metal wire sord of thing came out of the pump thingy and i didnt know were it went.

[@ronplucksstrings7112]

Thanks for a very helpful video, but I if could make some comments (and these are meant strictly constructively for future videos!) ...if possible, lock your cameras focus at the standard work distance, so that it doesn't seek and allows video to go out of focus so often, and try to eliminate distracting background noise on audio (or bring up vocal)... Thanks for posting!

[@legendarybuilders415]

I didn't catch where you put the spring. Also I'm getting some blow back after I fire it and no air but when I pull the pin back I get air

[@clgraham82]

Great video...helped me put my 880 back together after letting it sit in parts for a few months.

[@JL-by4xu]

Good deal, thanks,

[@miltonsandoval1024]

Hola, en qué centro comercial encuentro el Kit de retenes de bomba de Aire Guns Daisy Powe Line , modelo 880 y otros modelos de la marca Daisy.

[@gregerway8369]

I'm having an issue with getting the safety, spring and metal ball detent back in properly. They came out by accident. Any suggestions? Great video, only thing I couldn't see was whether you took the safety out or not.

[@JL-by4xu]

+Greg Erway It is tricky, I place the spring with the ball on top and compress it to fit into the side cover. I had it apart in this video so you can see what I did, no good trick and the bigger your fingers are the harder it will be.

[@gregerway8369]

+Joseph Lewis After watching your video several times in the section where the covers for the receiver are put back on, I discovered that I was putting it in right but didn't realize when I had the gun back together that I had to pull the bolt back to get it to go into safe mode, Then when I closed the bolt I could snap it between fire and safe no problem. Works fine now... Thank you for the video and for the assistance,,,

[@tysonmaendel1783]

my daisy 880 seems to leak out of the end after i pump it i can hear air leaking from the end and also from it seems like inside,right where i slide the bolt into is there anything i can do to fix that like replace the seals or oil it or anything else?id appreciate your advise

[@drivesideways6550]

Great video! I have a Powerline 822 the pump tube moves up and down when pumped. Should it?

[@donnnieduerr2421]

Pump tube should not move.either inside tube dirty Or o ring on pump asm is bad

[@aranigonzalez8735]

My 880 pump isnt working what should i do?

[@-max-9966]

Sir can you help me when I tried to put a pellet in the gun it didn’t go in all the way so I wondered why when I tried to shoot it it didn’t shoot out and when I took it apart a spring came out of we don’t know where

[@JL-by4xu]

The most likely spring would be either the pump arm retaining spring or the safety button spring

[@malibuguy5187]

Can the butt stock be removed by only taking out the 2 large screws and 4 small screws in the receiver? In other words not having to split the receiver halves apart? I want to remove and replace only the butt stock due to a manufacturing defect.

[@fu2201]

Thank you brother

[@ColRAPR]

Outstanding !!

[@stuphaneslabuschagne2623]

Can a daisy 35 shoot vro a soop can or coffee tint

[@eforceable]

Mine does not have the Same screw configuration as yours,and Fewer screws.

[@JL-by4xu]

Then it is likely the old style, I also did the same video for it as well. There are also 880s that have one screw securing the stock but have new style internals.

[@amandasebastian8609]

That trigger part is a pain any tips?

[@MineCraft-to6qr]

Can please somebody give me a time stamp we’re there was a small compresses spring because while I was fixing a jam it came out and I have no idea we’re it came from and when I fixed the jam the gas the leaking when I pump it

[@heatheranderson3604]

What about the spring and last bolt

[@JL-by4xu]

Your going to have to be a lot more specific

[@MrSamc11]

Hello! I decided to disassembly my Daisy in order to shorten/lighten the trigger spring. I did not disassemble the trigger, just got the spring out with some pliers. However, after assembling, my rifle has the following issues, which did not existed before: 1. I can pump air BEFORE cocking the rifle. 2. I can make MULTIPLE shots after pumping for one shot. That is, I can cock, pump 6 times, make shot, cock, make shot, cock, make shot. Is this caused by the shorter/weaker trigger spring? Or by something else? I am really wondering because all disassembly videos seem so trivial that I am really doubting I messed up something by accident in the process. Thanks

[@bobhaddock957]

have old red ryder bb gun. bb's wont shoot out. put coat hangr down barrel and think I have stuck bb. put onein and it went down to the slot. saw it fall down when I cocked it but will not shoot out. sprayd penetrating fluid down barrel and let it sit. still no luck. any idea ?

[@JL-by4xu]

Sorry I am not as familiar with that model as the 880 and other models. The Red Ryder is a spring air rifle and a very different design than the 880. I have had rusted BB's cause problems before and something like that could be causing it to fail to feed, if however it is now feeding and doesn't shoot I would look at the seals.

[@swaggerbagger6950]

i dont know if you still reply to comments but if you still do i need help with my 880, i disassembled by 880 to clear a nasty jam and when i re-assembled it the safety does not click into place and is freely sliding back and forth, its a major safety concern for me so if you have any tips i would be very great full, -jason

[@JL-by4xu]

Do you still have the safety buttons spring and ball bearing? That is what holds the button in place, without them it will slide around as you describe.

[@nfcconstruction77]

I have. a little plastic piece that looks like it has a hole in it. I didn't see where it came from when taking it apart and can't tell in the vid if you had the same part

[@JL-by4xu]

Lot's of different parts can match what you describe. If you can attach a pic I will ID the part for you.

[@johnmericle5248]

Thanks for the info. I bought O-rings, oil wiper, and a buffer on eBay from you.I have an old style 880 and I used your video to tear it down, (not totally like you did), but when I went to put it back together, your reassembly video is for a new style 880. The pump assembly is way different. When I took it apart, I didn't find a plastic washer, only 2 metal washers, an o-ring, a buffer, and an oil wiper.(They were really torn up and gooey so it might have had a plastic washer). Do I need a plastic washer back in there when I put it back together?Also I am having trouble putting the barrel back in the barrel cover. It is extremely tight, but it came out - it's gotta go back in...right?Any help you could give me would be much appreciated.Thanks, John

[@JL-by4xu]

The plastic washer behind the oil wiper was implemented around 2000 by Daisy, all the previous models did not have it. I like it as it keeps the foam oil wiper in place, but it is optional. I will be putting up a video on reassembly of the old style 880, just got to find the free time to do so. There are some tricks to the old style.

[@irawanarief9529]

I want to change like that, because maintaining powerline daisy 88 can't.

[@ericadams5019]

The bottom of the pump tube on my 880 is completely different.. Are there diff variants? MIne is real old... 25+yrs I cant get the pin back in to slide the frame rail back in. It ALMOST goes back in if I push the frame rail on. It feels like its compressing a spring.Help?

[@JL-by4xu]

+Eric Adams Yes, yours is the old style and the pump tube assembly is different. I plan on making a video this winter of a complete tear down and rebuild of the old style. It is tricky to get the pump tube back so that the pin can be placed back in. Might try looking for a video of that style, kinda hard to help in writing.

[@mikebiorn9660]

Great video! Did you ever make one about the really old style? I have one without the diamond on the forestock. This video was close enough that I could figure out the rest. I still have a few issues to fix. I also need a new wiper, so I’ll check out your eBay.

[@hectorcalvillo3102]

HI! THE SAME HAPPENS TO MINE A POWERLINE 922 CAL 5.5 ....+25Malachi Could be a lot of reasons, if it is leaking while you pump the O-ring on the pump head is a likely culprit. If you can punp it several times and hear it leaking while not pumping it is most likely the chamber seal followed in likelyhood by the exhaust valve. BUT COULD YOU BE MORE SPECIFIC....SENDING A VIDEO YOU FIXING THIS PIECES? MY REGARDS

[@25Malachi]

Hey my 880 is leaking air every time I pump it all I hear is hissing and there is never enough pressure to shoot any advice on how to fix it?

[@JL-by4xu]

25Malachi Could be a lot of reasons, if it is leaking while you pump the O-ring on the pump head is a likely culprit. If you can punp it several times and hear it leaking while not pumping it is most likely the chamber seal followed in likelyhood by the exhaust valve.

[@billmerschman121]

Thanks for the help

[@JL-by4xu]

+Bill Merschman no problem

[@JL-by4xu]

A link for all the Daisy 880 parts I have on Ebay: rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=10&pub=5575133825&toolid=10001&campid=5337780639&customid=&icep_uq=Daisy+880&icep_sellerId=jlmissouri&icep_ex_kw=&icep_sortBy=12&icep_catId=&icep_minPrice=&icep_maxPrice=&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg

[@aftabmalik6050]

Thanks alot

[@franciscoramirezamaro143]

Oye nesesito una de esas partes la que ASE la presión de aire la mía de mi 840grizzli ya no jala podrías desirme cuanto cuesta y como poder comprarla ? Yo vivo en nuevo laredo mex

[@dakotabolton3104]

Hey I cant get the first pin to go in

[@gingercrippen6322]

🤯👏nICE!

[@kelvinlopez5760]

I got a little spring and I don't know where it goes, help please

[@JL-by4xu]

It is likely that it goes into the safety button. There is a hole in the safety button that a small spring goes into with a small ball bearing placed on top to hold the safety button in place.

[@franciscoramirezamaro143]

Bueno ya la vi es la piesa completa cilindro de aluminio plástico y tubo de asero ke el es cañon te agradeseria si me das esa informacion

[@JL-by4xu]

I am currently working on a website dedicated to the Daisy 880. www.Daisy880.Net I sell parts and provide information about the 880 on this website.

[@shawnrosemary2614]

+Joseph Lewis thank you very much this helped a lot the trigger group was a pain though but I now have a working powerline 880

[@JL-by4xu]

+shawn rosemary good deal, the trigger assembly is probably the hardest part to get back together on the gun.

[@shawnrosemary2614]

yeah it was but with out this video I would've just went to buy a new one and that's just wasted money

[@JL-by4xu]

+shawn rosemary Thanks, glad I could help.

[@scotthenderson4376]

Do you have a video of the trigger mod?

[@JL-by4xu]

Sorry I don't. I have more repair videos planned but not any modification videos at this time.

[@albertob866]

I have a pellet lodged in backwards not sure how to get it out and that same spring came out too ugh can anyone help me

[@JL-by4xu]

I would use a cleaning rod to push the pellet back through.

[@GrammyAward-y9h]

Its funny how u just skipped the fact that there was a retaining pin u didnt mention and it went from laying on your table to disappeared without u saying a word about it!!! So where does that 2nd pin go?..between the time 1654 and 1657 it jus disappears!!! What the heck man?...got me all messed up

[@aliceplants8970]

The background noise is often louder than your voice.

[@fernandobarajas4196]

Good way to cut the video when I needed to see where the wheel guides went smh 👎🏽

[@terrybest8973]

make a video of all of your 880 model guns i have manny i collect them all old new 822 820 817 922 822 881 880 lol lol i love the daisy platform

[@harrywanker648]

ATTENTION VIEWERS THE SOUND IS MINIMAL UNTIL 5:38 THEN ITS STILL HARD TO HEAR BUT STILL LOUD ENOUGH TO WAKE A SLEEPING CHILD WHEN PLAYED AT FULL VOLUME ON A SUB SYSTEM. ( THANKS FOR THE WARNING ASS HOLE!). NOT LIKED BUT STILL SUB'ED. GOOD VID.... jerk.

[@josephmelgar7960]

español plis

[@harrywanker648]

Cant hear you wtf

[@adam100a8]

Yikes...