Dakota Digital HDX App for iOS and Android!

With the Dakota Digital app on your Android or iOS device you can easily set up your new HDX Dakota Digital instruments!
Wireless connectivity allows for simple calibration, troubleshooting and a handy diagnostic tool. The app can take advantage of the GPS built within your handheld device, utilizing this as another simple option for speedometer calibration!
#thefutureoftraditional

[@johnc.wunscheljr2873]

this is much better system . I bought a intellitronix for my 57 chevy truck it has been a pain in my a!!!!!ss from the start. I wish I would spent the little bit more$$ and went with Dakota digital dash

[@Saucymantana]

I got hdx gauges in my boxchevy with a LS engine but I can’t get my fuel gauge to read right and I went and fill my tank up and went in the settings and tried to do it manually but the gauge wouldn’t go all the way to full. So am I do something wrong ?

[@DakotaDigitalTV]

Hey! The stock sender should be 0-90ohm; make sure "GM 90" is selected in the FUEL setup menu. If that still doesn't do the trick, with the tank full, go into the FUEL setup menu again and select TEST; this will give you a look at the ohms being read by the control box and help us zero in on what sender you have, or if the sender is faulty. If you're STILL not up and running, please contact our tech support team. 800-852-3228 [e-mail]

[@willysquebec9792]

Ok no problems for installing the app and communicate with the cluster ...but how do you adjust the clock ????

[@DakotaDigitalTV]

Its done with the programming switch, not the app: kzbin.info/www/bejne/rGjFhoV3hbSDa9E

[@davidvillagrana7287]

What all I need to buy for it

[@DakotaDigitalTV]

Thanks David, The "Dakota Digital Automotive" app is free, used with an HDX or RTX system.

[@GearheadOutlaw]

You guys need to give some love for the 4th generation F-Bodies

[@nappyN8]

be cool if weather temp was option on the display nvm see it in there

[@Macnificent78_]

I cant get the app to work any tips

[@theflashjaxx]

I really wish I had gone with dakota digital gauges in my k5, I went with new vintage instead and have regretted it ever since

[@DakotaDigitalTV]

Thanks for the message, Maybe on the next project!

[@mackbrower]

How do I drop the sound alarm? Or at least lower the sound significantly?

[@DakotaDigitalTV]

Hello Mack, In the HDX menu, navigate to the "WARN OUT" section. Then, enter the "BUZZER VOL" submenu, this will allow you to select a volume range from 0-10.

[@mikeyp306]

Does the HDX model require a temp BIM module and gear position modules or can the BIM 01-2 work for all the sensors needed for a 2005 6.0/4L80e Swap?

[@DakotaDigitalTV]

Typically the BIM-01-2 can pull transmission temp and gear position data from your application.

[@theshark2804]

Running an ls with 4l80e. Will running the app give me a gps speedometer or do I need to add on gps module?

[@DakotaDigitalTV]

If you would like to utilize a GPS speedometer, the GPS-50-2 would be required. But, since the 4L80E transmission has a VSS onboard, you could connect to this instead, creating a wired connection to the Dakota Digital system.

[@theshark2804]

@@DakotaDigitalTV makes sense now. Plus I’m using a Holley so all my readings will come from that. Thank you.

[@fordracing5oh]

Does this work with the 94-04 mustang digital dash

[@DakotaDigitalTV]

Hello there, The app functionality is limited to the HDX and RTX platform of instruments. Unfortunately, this will not work with the VHX Series, such as the 94-04 offering.

[@Macnificent78_]

Looking to purchase a hdx for my 1978 impala landeu is there ant additional part I need to install for it to work completely???

[@DakotaDigitalTV]

Hello, All Dakota Digital instrument systems will include a control module, as well as sensors for the Speedometer, Oil Pressure and Water Temp. If you have a functional fuel level sensor in the tank now, that can remain as-is.

[@Macnificent78_]

@@DakotaDigitalTV what about the battery gauge over hearing and check engine light???

[@DakotaDigitalTV]

@@Macnificent78_ The voltage is determined base upon measuring the input voltage, so a separate connection is not required. A check engine light is just an individual wire connection to the existing wire (if computer controlled).

[@Macnificent78_]

I finally got it installed and I love it only issue is the app is not working any tips lmk thanks

[@coreywalker1374]

How do I find the app? All I can find is the motorcycle app

[@DakotaDigitalTV]

Search "dakota digital" in the Play Store or wherever you find your apps.

[@elbarbs]

U cant change mph to kmh ?

[@DakotaDigitalTV]

Since the printed face of the speedometer cannot be changed on the fly, no; you'll order the system with your preferred units. Additionally, you can see both MPH and km/H speed units in the digital message centers.

[@chrishall5368]

I'm having a hard time syncing my Bluetooth to the Dakota digital gages

[@DakotaDigitalTV]

Please call or email our tech support team. 800-852-3228 [e-mail]

[@barneygoodman5477]

Me too, I can’t get my dash to speak to my iPhone... Bluetooth on YES, key on YES, no clue, correct....

[@afana]

does it come with kilometers instead of MPH ?

[@DakotaDigitalTV]

Thanks Mohammed, Yes, this can definitely be special ordered in metric units.

[@afana]

@@DakotaDigitalTV that's good to know . I'll look into it once I get done with my rebuild . It's for 1996 tahoe lt 2door.

[@tacticalty9693]

Y’all offer the app compatible guages for a 95-99 Chevy Silverado?

[@DakotaDigitalTV]

Unfortunately not, the app is a component of our HDX Series of instruments, this line offers applications up through '94 Chevy Trucks currently. Thanks for checking in.

[@tacticalty9693]

Do y’all plan on making an actual digital dash for the 95-99? Could i custom order? If so how much?

[@tacticalty9693]

Or maybe hdx version? I’d love to have a set for my truck just not satisfied with the guages that’s offered for my model. Don’t get me wrong I’m sure there nice as heck but for 800 bucks I’d like something more than a basic cluster that’s offered for my 95

[@DakotaDigitalTV]

Hello again, Please give our sales crew a call at 800-852-3228, we have some options to discuss and this may provide a simpler path. Thanks!

[@racetech5318]

I cant find the app, is it down?

[@DakotaDigitalTV]

Are you Apple or Droid?

[@racetech5318]

I am apple :)

[@DakotaDigitalTV]

@@racetech5318 If you're using an iPad, tap "Filters" in the upper left corner and change the compatibility to 'iPhone only" It should be there!

[@jg81z28]

@@DakotaDigitalTV how do you change the time on the clock on bluetooth

[@DakotaDigitalTV]

@@jg81z28 Hi, setting the clock is still handled with the programming switches. The App is not used for adjusting the time.