DALY BMS 10S wiring video

thx for video. very best Elhamdülillah

[@mytechreview.144]

What about decharging cable?

[@DPTech_workroom]

You changing the resistance of the wire cutting it to different length. Will the BMS work correctly while balancing and checking the voltage of each cell under load?

[@dalybms666]

Dear friend, it have no effect. The resistance of the wire is very small, so it will not change voltage or anything else.

[@user-de3ee7su3o]

Чем заменить или аналог трансформатора TR73-151?

[@abc11508]

Hey, greetings. Where could someone get the light board for connections

[@user-de3ee7su3o]

Где взять, чем заменить, при разборке отрывает трансформатор с мясом TR73-151 bms 250a.так сложно сделать всё на резиновой прокладке? Чем его заменить? Его нигде нет в продаже. Такие бешаные деньги за одноразовую сигарету. Я ращочарован

[@JohnAlain74]

How effective is the balancing of this BMS?. If a bank of cells reaches 4.2V before the others will charging stop on the other cells?

[@bobsoft]

Resistors used to keep voltage even.

[@timothyodum4994]

What do you use to power the BMS to charge? Would a Li-ion Battery charger With an output of: Dc42v at 1.5A work?

[@bobsoft]

If its a 10s pack then that should work (4.2v x 10)

[@whitefeatherslinger8194]

Hi my bms has no power wires ,for example red +black- ,i do have a b- and p- and c- ,any help is appreciated

[@GreenXrays]

Where do you connect charging cables?

[@bobsoft]

Depends on BMS. (Common port) black to BMS P-, Red to battery positive wire.

[@TheBaddestMek]

Red cable coming from battery and black cable from bms

[@kingwolf1464]

Thank you

[@dhruvsinghthakur9291]

10 s 36v 30 a BMS ka kya price hai

[@rihardsjacinics4434]

Why do you even make the video with BMS connection if you can’t do that right? You made it wrong! First black wire goes to the (-) minus, but first red wire goes to the same cell plus (+) Next red to the next plus(+) and so on. No wonder that some of battery’s just burning 🔥 down if they have no BMS connection.

[@bobsoft]

Nope. us.v-cdn.net/6024911/uploads/editor/0a/cf5vf8wf23hc.png

[@JRP3]

Look again at the video, it's wired correctly. First black wire goes to pack negative, second wire goes to the other side positive. It's a 2P pack so even though the positive wire is located on the cells next to the first group they are still electrically connected in parallel and act as a single cell.