How I replaced stuck ignition on VW Golf 5 - broken ignition lock remove

[@DanielH]

Like & Subscribe?

[@GotNoRapidFire]

first big fail was you cut the wrong wire on the battery... all the time you have to cut the negative side

[@realMrVent]

I love how many people are taking back their cars in the sense of finding ways to repair it themselves

[@bhorat]

Thanks for the time and a great video. I have a MK5 Jetta, similar to this and I did not remove the steering wheel, I just turned the wheel from North to South (180°) and was able to unscrew the T8 or 9 off the control module at the bottom.

[@DanielH]

Thank you for the information. Hope I don't have to take it down again, still works fine after all this time. Best car I ever got

[@userb90088r]

Hello. So you changed new barrel? How did you remove old one when it wont turned enough?

[@cocojambo6386]

I have Same Problem now 😢

[@userb90088r]

@cocojambo6386 i solved it. I changed new swich and had to adapt new key to it with vcds

[@nadeemahmed3700]

@@userb90088rdo you have to use vcds ?

[@gzsrocks]

What did you do to remove the ignition where the key is I watch the video all the way up to that and I don't know I just see you use a red thing can you tell me what you did I'd appreciate it as soon as possible and thanks for the video it's so helpful

[@jorgwelp455]

Super Anleitung, hat mir sehr geholfen 👌

[@albertoromano7853]

Complimenti, bel lavoro.

[@anwarmurad3439]

Can you please explain how u removed the 2 impossible screws from the top, Did u beat them loose ? Or did u make a cut in the centre to fit a flat screwdriver ? I am now at that point and dont know how to proceed.

[@DanielH]

Using a flat screwdriver and a hammer I gently beat on them until it made a small gap and was able to turn them, after that I used normal hex screws

[@anwarmurad3439]

@@DanielH thank you , it worked 👍

[@christianosorio3418]

Muy buen video 👏👏👏👏

[@larseriko]

Thank you!! This saved the day, and my wallet!!

[@PaguPvs-le]

Misto, asta trebuie sa-l pun la salvate, e bun pt pe viitor 😅✌

[@DanielH]

Am desfăcut și contactul bucățele tot. Dar aia nu am filmat...

[@PaguPvs-le]

@@DanielH Trebuie sa recunosc la auto sunt paralel

[@LOKI123451000]

Danke sehr gut 👍 habe genau so gemacht

[@paintwithshrishty]

Too good my friend 👍

[@mohammadtawhid7139]

EXCELLENT work

[@wooddiydesign6992]

Great skill dear friend i always with you.

[@benjackson1109]

What’s the situation with the key once finished? Can you use the new key that comes with it and the engine will start straight away or must you use get it programmed?

[@DanielH]

I fixed the old one and still used the same key. I didn't changed the cylinder

[@benjackson1109]

@@DanielH thanks man!

​@@DanielH and how? That would be the point! How did you removed the immo ring, when the key wasn't able to turn to the ignition position?

[@DanielH]

I went back and forth with the key until it turned and was able to take it apart. I had a piece of metal inside that was flying around and didn't let the key turn. It was stressful enough

[@captaincooter9244]

@@DanielHif the new Infiniti on switch’s come with a key just take the internals from your old key and put it in the new one

[@anwarmurad3439]

where did you buy the new ignition barrel from? does it work with the old keys?

[@col9952]

Do you have to get new keys synced after?

[@TheHarly]

Nice sharing 😊

[@christophergonzalez3104]

Any special tools needed?

[@DanielH]

A good sharp screw driver and hammer to make a mark and be able to rotate the screws that hold the ingnition start in place. They are round head with no way to turn it.

[@BarGolum]

don’t take off the airbag or steering wheel as soon as you take off those plastics 3 screws (use t25) then take off the security screws with a chisel, desconect 6 cables underneath ( steering column module, airbag connector, reader coil, another 3 connect it with ignition module) just cables, take the part off, replace the whole cilinder(silver part) connect the original key with the black part (ignition lock) remember to transfer the key lock solenoid to the silver part, when you put it back make sure the key is in the on position that way the steering lock is down. Short: take off 3 screws right left 1 underneath, take the plastic off, deconnect the cables underneath, replace the silver part for a new one, switch the black part where the key goes to the new barrel use a Allen wrench or clip 📎 yo removed it, this is the most difficult part the rest is easy, ouch down and down until that back park go off.

[@SubShot12]

Verliert die wegfahrsperre und der Schlüssel die codierung ?

[@kasparskarkle373]

I went to a dealer,all they asked for was log book so the barrel is cut out for the same key

[@elliekarnel3082]

I have taken the black piece (key locking mechanism ) off the barrel I was wondering can I just put this on a new barrel and use the same key from before ??? without having too have a new key Thanks

[@sams2217]

Did this work?

[@Grant-H2O]

@@sams2217 in theory YES that will work

[@jerseyactor6053]

I wish you would explain I'm having that problem with my 09 rabbit right now

[@Wild-eyes97]

Thanks 🙏

[@MarianMarius]

salut , suruburile pe care le-ai folosit sa inlocui niturile de cat sunt ? par de 12 sau sunt mai mari ? am aceasi problema cu contactul la un touran din 2009, cutie automata

[@DanielH]

Șurub clasic m8. Cu cheie de 13 se strânge. Spor

[@vasilepatranoiu1867]

Dacă schimbi contactul se mai schimba altceva ? Sa citească cheia

[@Jhon-e4l]

La mine se da peste cap nu e blocat , intra curent dar pe ultima treapta nu pornește ..face figuri , oare sa fie contactul ? Sa nu fie tot butucul ?

[@javierxeon]

Me sale bloqueo alarma antirrobo y no puedo arrancar el audi. Como hacerle?

[@PippoBaudo-cn9ip]

2:43 what kind of key for this?

[@didjeridu100]

Torx 55

[@timpet7032]

Dupa xe il montezi pe cel nou trebuie schimbat chipul de la cheia veche la cea noua?

[@DanielH]

Da

[@sorinmutascu1932]

Salut ce anume trebuie schimbat lamela noua la cheia veche ?Cum se face mulțumesc

[@joshkullman505]

I’m swapping to the new key and lock cylinder. Do I just need to have the old key close to the ignition to sense the chip?

[@DanielH]

I think so, yea

[@joshkullman505]

@@DanielH sweet! I figured having the old key in close proximity is easier than swapping the sensor chip to the new key.

[@azislo]

@@joshkullman505 You have to reprogram it to new chip, probably in VCDS, I would believe.

[@bikerboy3k]

This exact same thing happened to me yesterday when I finished my shift. I can't afford a new barrel, do you think I can fix this stuck one ? Key won't turn to ignition.

[@DanielH]

In order to be able to take take it apart you need to rotate the key in the barrel. Don't force it, back and forth, tray gentle taps until that loose piece of metal let's you rotate, take apart, find the problem, put it back together and might work. You need a lot a pacience, i took it apart and put it back together like 10 times until I got it to work. It's a lot of small pieces that only go one way. Also i cut the immobilizer because I was afraid of not getting wheel stuck at high speed. Might as well look for a used barrel, here we have used parts and they are kinda cheap.

[@bikerboy3k]

@@DanielH I'm in the uk and the cheapest is 70£. Figured If I take the whole assembly out then it's easier to tap and rotate, because now I tried to tap the key with the end of a screwdriver and it doesn't do anything.

[@spideythegamer8934]

Is the same to for the polo 6r?

[@DanielH]

I can't tell you for sure.

[@spideythegamer8934]

@@DanielH what did you use to remove the steering wheel?

[@DanielH]

For that bolt I used a hammer and a screw driver. Gentle taps until the flat screwdriver made a place on the screw head and then used that to unscrew. Was a little time consuming

[@santimw930]

How to remove the plate that is under the Switch is that my friend's is a bit strong and I'm afraid of breaking it, I don't see any lock or clip that visibly stops it

[@azislo]

Check other videos, there are two holes (long and narrow) where you insert something inside to loosen the clips.

[@motodork]

What tool do I need to remove the steering wheel. It looked like you used an Allen wrench but the socket didn’t look like an Allen wrench socket.

[@Djmetalwrx]

Torques

[@didjeridu100]

Torx 55

[@mitchellburko9856]

About those (security) bolts with heads sheared off. Nice technique, using chisel or sharp screw driver to loosen them. what size are the replacement bolts. Would like to get them before I start. Great video, super helpful, Thank you Mitch

[@DanielH]

M8 standard screw

[@hec07]

Where did you get the parts

[@DanielH]

From auto dismantling shops for cheap parts

[@ana_cripita]

hello, I have a golf 5 1.9 105 bkc engine, I have a problem, it made a short circuit and there is no light on the board, it starts and the second second it stops, can you help me?

[@DanielH]

Un electrician bun și tester. Altceva nu cunosc, mai fac mici reparații dar atât, nu am idee cum sa te ajut in cazul tău. Dă-mi un semn cand afli problema, sunt curios ce a fost

[@FranciscoPerez-dl8iw]

What's the right technique todo remove the brakeaway bolts?

[@CATALINPASCU-eb8of]

I make a small hole with a drill and then insert a torx. The steering wheel lock can be removed without removing the signal and wiper levers. Success.

[@kinderis21]

You just change the bolt ?

[@DanielH]

Changed the bolt for easy disassembly in the future

[@joead5739]

How did u use old key on new barrel 🧐

[@DanielH]

I repaired the old barrel. It had a broken piece of metal that didn't allow it to rotate. Works fine until now

[@joead5739]

@@DanielH same here and immobiliser light came on

[@davidesqueda9017]

ITS NECESARY TO REPROGRAM THE KEY ?I HAVE THE SAME PROBLEM

[@ryancox9901]

I did this myself and put old lock mechanism onto new steering lock, now the electrics all turn on and work fine but no ignition?

[@DanielH]

Do you have 2 keys? Maybe use the key from the new lock

[@ryancox9901]

@@DanielH I didn’t get a new lock, just the steering lock, fitted old immobiliser to new steering lock. Steering lock just came with ignition switch and no immobiliser

[@seanashfield6144]

Did u ever get to the problem with the ignition?same whats happening to me now,electrics coming on but no ignition

[@melvinriddick7253]

Wat tools is needed?

[@carlosmoreno9094]

Amazing.

[@loganelvald]

Did you have to swap parts over from your old lock cylinder? Thank you

[@DanielH]

I took the old cylinder apart and there was a loose chunk of aluminum that blocked everything. I didn't filmed that because it was a lot of work and frustration because I had to put and start again over and over again. If you change the cylinder you will have 2 keys, one to start the engine and the old key to unlock the car.

[@loganelvald]

@@DanielH my problem is my key won't turn so I can't put it into accessory to get the key portion off. Any idea? Thanks for the quick reply friend

[@DanielH]

I had the same issue but you need to try until you can turn it. I tried a lot of times until I could turn the key.

[@razaksatar5610]

Your new key does it come with a new transponder cip....how can the immobilizer system reconizeses the new transponder in the new key

[@DanielH]

Some electric guy told me if you change your cylinder, you'll have to use 2 keys. Your old key to open the car and new key to start it.

[@YungSwagg]

It’s almost impossible for me to get sheer bolts off

[@XWhite78]

Drummel tool will do the trick

[@Grant-H2O]

@@XWhite78 Drummel tool?? LOL it wont fit. Have you even tried it before? your drummel must be a really short one.

[@sanandrea23]

sorry how did you manage to internally open the steering lock to remove some broken pieces

[@DanielH]

There are some KZbin videos on how to take apart the whole thing. Unfortunately I didn't film the process. It was stressful and I had to spend a good amount of time until I put it back together.

[@PaulMatiu]

Cum ai scos alea 2 suruburi? Nu reusesc nicicum

[@DanielH]

Bătut cu o mica daltă până și-a făcut loc, și cu șurubelnița plată. Bătăi mici și ușoare, durează ceva

[@kobraluci6615]

Salut iartă-mă ca te deranjez dacă mai ai contul dar merge așa simplu demontat și montat altul în afară ca ai altă cheie la contact dar nu trebuie cotldat sau ceva la calculator contactul nou ?😊și m-am spunemi te rog La acum ar cu totul nu ?

[@DanielH]

Eu am reușit să mi-l repar butucul original. Avea o mică bucată de metal ruptă înăuntru, cu greu l-am asamblat înapoi. Daca pui alta cheie cu alt butuc, trebuie sa ai cheia originală langa tine când pornești, deci cu cheia originală incui descui și cu cea noua doar învârți de butuc.

[@DanielH]

Sunt amator, mă ocup cu tâmplăria artizanală și mici reparatii pentru mine, nu fac reparatii auto

[@MBLDN32]

Help me I need to get a barrel for a3 8p quattro?

[@kawa.7772]

hi today i did the same maintenance as i returned all the stuff, the car still doesn't work now who knows what's wrong😢😢

[@jerryvallespin1712]

gomagawa pa ba po kayo ng susi ng car po

[@mosalami1548]

Why the heck do remove the steering wheel, what’s wrong with you

[@DanielH]

You do it better my friend. I'm curious how you can do it.

[@mosalami1548]

@@DanielHyou can clearly see in the video there is no need, you have enough space for every screw. Show me one point/one screw which made you uninstall the steering wheel, just one ☝🏻

[@keithg145]

What size is the part for getting the bolt from the steering wheel??

[@DanielH]

I think I used an sharp screw driver and with hammer and gentle hit it until it made room to turn it.

[@brewdaddydub5379]

Cr-v 12. I used a T55 s2 cr-v and it worked just fine

[@Grant-H2O]

Hes talking about the 12mm triple square (12 point) bit its 12 mm

[@jkboyette]

It's called a XZN triple square M12 (12mm) spline bit. They have 12 points that fit inside the bolt you're trying to remove/install. They usually come in sets from M4 to M18 or larger.

[@floreamihai.]

mai aveai putin si demontai tot bordul pentru schimbat contactul..bine, intr-un fel e de inteles ca nu tre sa fie o operatiune prea rapida

[@DanielH]

Da, baiu mai mare e că are șurube cu cap neted. A destul de complicat sa le dai jos. Acuma am pus cu cap normal.

[@gabibum]

@@DanielH Ce marime sunt cele doua suruburi?

[@DanielH]

M8

[@alialmusawe1476]

Bravo

[@leoneondino9122]

Anch'io avevo lo stesso problema con la mia Polo Volksvagen e ho risolto spruzzando un po' di W40

[@GotNoRapidFire]

first big fail was you cut the wrong wire on the battery... all the time you have to cut the negative side

[@laurentiubumbac257]

Acum o 3zile am pățit și eu, dar nu mia dat voanul jos, ci mult mai simplu .

[@DanielH]

Toate opțiunile le-am căutat și doar așa se putea da jos contactul

[@hamidbouhaba6474]

Je vous merci

[@DanielH]

Avec pleasir

[@nassrinmohamedrifath7913]

Thx for sharing but too Much Work it Holds Care.

[@cosmereategui8288]

dónde consigo el swiche del skoda

[@hectormontes9740]

Is not necesary pulloff the power steering wheel, is extra work, I can do it

[@DanielH]

Tell me how please

[@latenightsadness8698]

Steering wheel angle sensor removal u skipped

[@rt2255]

Never heard of that even in cheap american cars. Vw sucks, last good car they made was bug pre70s not later ones.

[@mesterim]

O fost ceva lucratura.

[@DanielH]

Stai că le-am dat jos de 2 ori.

[@mesterim]

@@DanielH nasol

[@ionutzvl1653]

@@DanielH dacă schimb contactul , vreau sa îl iau de pe eBay vreo £30 vine cu alte chei , eu cheia veche mi sa rupt din suportul de plastic , pot sa pornesc mașina cu cheia aia noua si asta veche sa o țin in mașina aproape de contact ?

[@DanielH]

Poți lua cipul din cheia ta și pui in cheia ce vine cu contact. Asta daca nu merge varianta cu cheia lângă contact.

[@skriczi3345]

My cost repair is 200 poland cash

[@progaming.5765]

This guy his car problem is something else, he may be thrown away his car after this video😂

[@DanielH]

Car works fine and without a problem

[@progaming.5765]

@@DanielH ok please just this morning i came across a key with my car Seat Leon, i tried to turn on but didn't work, tried to do even by force but couldn't, help me plis

[@ferizaj8541]

Hello, I would like to ask a question, please, my car is a Seat Leon 2011, the lock broke when I left, I have 2 locks, the door opens with 1 lock and twenty cars with 1 lock, please tell me how to do it with 1 Can you put me down and open the door for me? Please help me.

[@Silwiu]

Sa-mi bag pula-n el cate trebuie sa demontezi 😐 Multumim pentru video foarte folositor! Mie mi s-a blocat butucul de la usa si ma gandeam sa aplic solutia cea mai buna, si anume sa schimb si la usa si la volan.

[@DanielH]

Sunt voci care zic că merge fara sa iei volan jos, eu nu am văzut cum, dar ei insistă că se poate... Ar fi ok daca s-ar putea

[@omdadomda6108]

Faut pas accroché tous les clé que tu as a la clé de la voiture

[@adelmebarki-z2v]

😮😮p

[@costimaruneac286]

👎

[@ferrarisarecool7]

I hate videos that skip a step. Like you magically were able to drop the electric control bit under the steering wheel. Yours just drops out, apparently. Shit video skipping steps

[@DanielH]

Sorry 😔