Replace the battery in an Audi key fob, new generation fob (2019).

Here we are going to replace the battery in an Audi key fob with a fresh one. The new fob is sleeker than previous versions and we first saw this in a 2019 Q8.
We'll need the tip of a very small screwdriver and a new CR-2032 battery.
Models covered include the Q8, Q7, A8, and A6.
For help with other push button start cars and key fobs from this or other manufacturers, look for more videos here on KZbin or go to DashboardSymbols.com.
And if we helped and you see the "Thanks" button below the video, please lend your support to our efforts.
#KeyFob #DeadKeySolutions #Audi #keylessentry #pushbutton
-------------------------------------------------------------------
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true.

[@cocodimous2455]

This was the best video I’ve seen on this topic. Very informative.

[@DashboardSymbols]

Thanks. Hope it helped...

[@seangray8509]

Thanks! The freeze frame of the insides was really useful for finding where I needed to apply pressure

[@DashboardSymbols]

Glad to help...

[@alexpreston7009]

Thank you for uploading and taking time do do this - worked perfectly - good clear instruction

[@DashboardSymbols]

Glad it helped...

[@fouadaslam]

Thanks for this. Very helpful

[@DashboardSymbols]

Glad to hear it...

[@ameralbadry6825]

Thanks

[@DashboardSymbols]

You're welcome...

[@sakharskr992]

💪worked..you are great

[@DashboardSymbols]

Thanks and glad to help...

[@robertmcclean4723]

I did this but I’m still getting a low battery warning. Do I have to reset the key fob after replacing the battery?

[@DashboardSymbols]

No, not at all. Have you recently started carrying another fob as well? Something electrical is interfering with the signal and its evidently a recent change...

[@hi-litergreen]

The same thing is happening to me with my Q8, did you ever find out why?

[@DashboardSymbols]

@@hi-litergreen The previous contact did not report back, so no. Were you carrying another fob, etc., as above?

[@hi-litergreen]

@@DashboardSymbols I’m not carrying another fob....I replaced the battery but when I get into my Q8 to drive, I’m still receiving the same low battery message on the dash for the key fob.

[@DashboardSymbols]

@@hi-litergreen Unfortunately, its time to contact Audi. And please report back!!!

[@robinhayfordfiebig2433]

My 2020 Q7 Said I needed to replace battery in key fob….I did…works fine, but message keeps coming on every time I start vehicle???

[@DashboardSymbols]

First, I would ask if the old one was truly fading. Would it start every time? Meaning the message might have been the problem all along. Otherwise give it a few days. If it stays, look for a way to turn it off in one of the menus (we don't have access to Audi manuals, so this is the best we can do)...