Data recovery from old scsi drives Using my Amiga 3000

E503: Recover data from old scsi drives. In this video Mr Johnathan asked if i could copy some data from a few old scsi drives to a usb stick. using my amiga 3000 and some daisy chain external case i managed to save 3 of 4. - yes i know you can zulu init, or daisychain to winuae, this is the way i did these because the drives were pseudo working. and wanted to use real hardware
the HAM video i refer to at the end:
• Amiga SCSI HDD in Wind...
Its Dangerous to go alone, take this!
be sure to check out Retro Rewind for all your Commodore goodies and services at www.retrorewind.ca
you can use my code NOCODE, to save up to an additional 15% off your next order. must be signed in for code to work Thanks everyone!!!
Like , Comment, Subscribe or support,
If you would like to help me keep this going, consider supporting my channel! Through patreon for as little as 1$ a month, (heck i spend more on lunch in one day). Please Consider helping me save Amigas. 100% of funds i receive assist me in purchasing replacement parts , tools and supplies to save these beloved machines.
/ chrisedwardsrestoration
Or a one time Paypal donation at paypal.me/macphreak4evr you should see a irish captain picard. holding a green beer.
(you will see)
Thank you to all my current patrons and supporters, I can not express how much your support means to me.Because of you and your support and generosity, I am able to fund repairs for others FOR FREE. I can not fix everything, but i do save many. So a personal thanks directly to each and every one of you!
Tools used in this video:
Tonya - a hammer
Aven Desoldering Wick
www.mouser.com/ProductDetail/...
Jonard IC extractor
www.amazon.com/Jonard-EX-2-Ex...
BackBit Chiptester pro v2
store.backbit.io/product/chip...
DIP Pin Straightener
retrorewind.ca/dip-chip-strai...
Helmet of Goober:
www.amazon.com/Headband-Magni...
Solder station WepTools 853d-5AII
www.weptools.com/products/853...
Desoldering station WepTools 948d3
www.weptools.com/products/948...
Fume Extractor: Weptools 948DQ
www.weptools.com/products/948...
Siglent SDS1052DL digital oscilloscope
www.amazon.com/Siglent-Techno...
Kotto silicon solder sucker aka Moana3
www.ebay.com/itm/203339405333
TV pixel display and wall pixel display
www.divoom.com
like the wall neon? get it here
www.retroledsigns.com

[@jjdigitalvideosolutionsllc5343]

I did some similar SCSI hard drive data recovery for a friend using my DraCo and an external SCSI CDROM enclosure to house the drives.

[@joeteejoetee]

Thank you Chris for all of your videos - you are the ultimate human Co-Processor of the Amiga community!

[@joeteejoetee]

Note (as an OG Amiga Genlock developer): A1300 is heavy because of the thick metal shielding against _external_ noise that could get onto it's very high quality output signals. The fact that A1300 outputs the input NTSC signal is decoded to RGB is astounding - I used to watch TV in the background (color zero) while multi-tasking all thru the 80 and 90's.

[@keyboard_g]

I remember sticking dead drives in the freezer to try to get a few minutes to back things up.

[@retrorter89]

I had to do this recently and used an old pc with 50 pin scsi card, booted linux and used dd to create a full disk image...then this image can be mounted in Winuae and voila ! it worked a treat. As long as the disk is good a full disk image is a good way to go.

[@jessedunn3766]

Head got stuck on the platter and detached. That's why it sounded better when it broke loose. But then you get the vibration due to unbalanced platter.

[@cp256]

I dumped all my SCSI drives, including an original A3000 Quantum LPS 105, to CF cards using my A4000 with a WarpEngine 4040 and cheap IDE to CF adapter. I can't find my CyberSCSI daughterboard for the CS060, even though I have the freaking box, manual and the external SCSI-2 connector board for it. The Warp schwings plenty well for puttering around and CF cards for cheap drives are great. Makes it easy to blow into my WinUAE on my peecee workstation as backups (and that gets backed up to two different 4TB drives as well) and they all work fine there. I have working backups of both of my '90s 4000Ds and my 3000D installs on the peecee.

[@togst]

Backed up an old SCSI drive from a GVP card recently. Sounded like a dying dolphin. Used a BlueSCSI in initiator mode to dump the drive to an image file. Surprised at how easy it was, and quite handy. Just need power and a data cable inbetween.

[@cullmaster7361]

Great stuff Dr Chris. I”m trying to help someone out by trying to get some Amiga Mod files off an old Zip 100MB disk. Luckily you know what partitions the old SCSI drives are… 🤔 Cheers 🍻

[@olepigeon]

The Apple case is a rebranded LaCie case.

[@DarrenJCrawford]

I have so many old scsi drives I'm probably gonna need to use these techniques, I'm pretty sure I have an adapter around here somewhere, maybe two. Thanks for the Retro Rewind 'nocode' code, I bought way too much. 😄

[@ChrisEdwardsRestoration]

you can use a Zulu without a PC, its just flip the init switch, and then you can just power the hdd and then zulu and it will image the hard disk to a file. I will do a video on that method also

[@TheSudsy]

I used to do this for PC friends and relatives with my A1200. Had SCSi and IDE hard drives, cross dos, fat95 et al and could salvage files for them. Even managed to steal some fonts !!!

[@anatolykosychenko8038]

Hi Ya & best wishes. SuperB! Thanks for work. Be Happy. Sevastopol/Crimea.

[@hamrdeye8927]

ZuluSCSI Initiator mode FTW! No computer even needed!

[@ChrisEdwardsRestoration]

Yes i know but this was not about that

[@pauledwards2817]

Or PiSCSI. Wish they got more love as a web interface is far more fun than pulling SD cards all the time. Though you have to use ssh for initiator mode. Wonder if putting file systems on PiSCSI would let us all mount disks in them and SMB share them?

[@ChrisEdwardsRestoration]

yes i did a video on that piscsi a year back. nice device. more MAc centered but works on amiga

[@HoldandModify]

Yeah I used a PCI to PCIe adaptor in that old video. Had to do a little dance with Windows 10 to get the Adaptec driver installed but it worked. Thanks Dr. Chris!

[@herdware]

Been a long time since I heard someone call Seagate Seacrate. :)

[@josephphillips9243]

Chris a thought. If those drives are dead and don't have anything valuable in them there is the a freezer trick that many swear by........

[@ChrisEdwardsRestoration]

That would be interesting to try but they have been returned to their owner

[@samuelbanya]

Neat as usual dude

[@RarefiedError]

Ah a MediaVision CDrom drive. I used to run that on my A1200. Seems I have 2/3 of it left in the box. (no software now sadly)

[@johnmay4803]

there seems 2 be lot of vids on youtube about how unreliable old scsi hard drives are! have you seen that to be the case chris? p.s fantastic vid as always

[@BerndFelsche]

Zulu SCSI card with image copy a drive to SD card in standalone... Just need power supply juicy enough for the drive.

[@pkf4124]

I need to do this with all my scsi drives

[@wskinnyodden]

There are PCIe to PCIE adapters, then you just need the luck for windows to still support the device or get an older windows :P Ideally, just get Linux and get going, for sure a SCSI PCI card will still work :D

[@revision386]

I love the Fu-Shit=Zoo.

[@bobrandale4864]

Woo Hoo!