Cummins engine rebuild failure. Opening a can of worms

  Рет қаралды 916,351

Dave's Auto Center

Dave's Auto Center

Күн бұрын

Пікірлер: 1 700
@xTryHardPanda
@xTryHardPanda 8 ай бұрын
Dave, you should follow through on these videos, even if it’s just a minute or two summary at the end of here’s what ultimately happened and here’s a clip of the vehicle running and driving at the end. Lots of these videos end of cliff hangers!
@OcRefrig
@OcRefrig 8 ай бұрын
Yea , totally agree. 👍
@JonathanDuddy-oq6nv
@JonathanDuddy-oq6nv 8 ай бұрын
Yeah, it's like watching an action movie but going home 15mins before the end.
@ChillToMusic87
@ChillToMusic87 8 ай бұрын
I agree also.
@robertmiller341
@robertmiller341 8 ай бұрын
I concur
@JonathanDuddy-oq6nv
@JonathanDuddy-oq6nv 8 ай бұрын
@robertmiller341 surely more of Dave is a win for everyone
@Xodontia
@Xodontia 8 ай бұрын
My father, who was an aerospace engineer for NASA for over 4 decades, had a saying, "You only get one chance to do it right the first time." A motto ingrained into my soul since my earliest days, rest in peace Pops!
@Shane-zx4ps
@Shane-zx4ps 7 ай бұрын
Was your dad ever on the moon?..
@Thewonderbreadman
@Thewonderbreadman 7 ай бұрын
​@@Shane-zx4psif he went to the moon, he'd be an astronaught, not an engineer.
@Shane-zx4ps
@Shane-zx4ps 7 ай бұрын
@@Thewonderbreadman. I’m kidding with you dude, I’d be proud also👍
@Thewonderbreadman
@Thewonderbreadman 7 ай бұрын
​@@Shane-zx4psI'm not a dude, I'm a space station.
@Shane-zx4ps
@Shane-zx4ps 7 ай бұрын
@@Thewonderbreadman I know you are.🤔
@wondurfulworld8285
@wondurfulworld8285 8 ай бұрын
"I don't want to spend any more of his money until he knows that this is what it's going to really cost" This is one of the golden customer service skills spot on
@redtango75
@redtango75 8 ай бұрын
Yes 100% would make a great channel even more so!
@roberta4989
@roberta4989 8 ай бұрын
Dave, I was a mechanic for many, many years. NIASE Master and dealer wrench, now retired. The hardest part was not fixing the cars, I found the hardest part giving disappointing news to customers, especially when I could tell they didn't have the money. It was never fun to tell them the bad news. I always thought it better for myself to explain to the customer of the issues rather than a Service Writer being the delivery of the news. I appreciate how carefully and thoughtfully you deal with this issue. Much respect!
@Maurice-c6z
@Maurice-c6z 8 ай бұрын
I was the same and always undercharged
@georgeglovier
@georgeglovier 2 ай бұрын
@@Maurice-c6z Yeah, I was the same way.
@doctorboy5892
@doctorboy5892 14 күн бұрын
Filling in for Dave here. That was so kind of you.
@leewalker3514
@leewalker3514 8 ай бұрын
He’s not angry man he’s a man that doesn’t like shabby work. I completely understand this man. Good job.
@bentetzner4263
@bentetzner4263 8 ай бұрын
I had 25 years with vw! I know where he is coming from!
@OcRefrig
@OcRefrig 8 ай бұрын
He's Been Doing it long enough to understand that doing a half ass job just makes everyone unhappy & miserable. Life's too short ! Do it Right the first time. Allways the Right way to go !!! You always end up spending more doing it the second time than if u had just done it right the First time. 😉
@barrysauce
@barrysauce 8 ай бұрын
Yep. He wants to do it right the first time. This person didn't do it right the first time and now he gotta fix it. The knowledge he has and his son is amazing.
@gulfy09
@gulfy09 8 ай бұрын
Vee dunes VW I prefer older diesel ​@@bentetzner4263
@ApHoney
@ApHoney 8 ай бұрын
Yeah I know the exact tone in his voice. I was a boat tech for 3 years before becoming a wireman and our master tech used to sound like this all the time. If one of us made a mistake he wouldn't get mad at us he'd just get that disappointed tone.
@gregdelong1539
@gregdelong1539 8 ай бұрын
Came across this site by accident, happy I did. As a former A&P Aircraft Mechanic in the 70's and 80's I really enjoy watching honest good mechanics at the top of their game.
@twinshark429
@twinshark429 8 ай бұрын
Dave's "Disappointed dad look" sends me straight back to the days of my youth and my lousy report cards.
@DavesAutoCenterCenterville
@DavesAutoCenterCenterville 8 ай бұрын
😂
@jonathanwhite3141
@jonathanwhite3141 8 ай бұрын
Me X12 lol
@jonnymac8925
@jonnymac8925 8 ай бұрын
I felt that😂
@pzm958
@pzm958 8 ай бұрын
Einstein had lousy report cards too
@terrygarvin1392
@terrygarvin1392 8 ай бұрын
You Sir are no Einstein...​@@pzm958
@jeseramos3067
@jeseramos3067 8 ай бұрын
The knowledge on this man is insane, he called the guy and went through every option down to the cleaning of the engine. And pointed it out that’s crazy
@jonnymac8925
@jonnymac8925 8 ай бұрын
Unfortunately, Dave is a dying breed of man.
@adansegura8909
@adansegura8909 7 ай бұрын
That’s normal to do if you’re a good shop 😊
@richtrujillo-hl8bo
@richtrujillo-hl8bo 6 ай бұрын
​@@adansegura8909few and far between
@chrisstengren8995
@chrisstengren8995 8 ай бұрын
So….love this vid too…I also strikes me that there is no stupid reality show crap in this channel….no fake personality conflicts…no contrived drama….no fake “breakout” stars…..just real mechanics doing real work for a great boss….I’d be a shame if this channel ever went that way….
@MathewWeaver73
@MathewWeaver73 8 ай бұрын
One of the greatest quotes that my grandfather ever told me was, “There’s never time to do it right, but, there is ALWAYS time to do it twice.
@kdogg82
@kdogg82 Ай бұрын
Huh???
@alexmcnally9688
@alexmcnally9688 7 күн бұрын
So true
@MuddydogAdventures
@MuddydogAdventures 8 ай бұрын
All this kid can do is learn from his mistakes. Hopefully it does not deter him from any further mechanical ventures. Working on your own stuff is a very valuable skill, especially nowadays.
@Mayamax3
@Mayamax3 8 ай бұрын
Yes, but you have to know your limitations or you're going to go broke practicing.
@b469b
@b469b 8 ай бұрын
@@Mayamax3 That is why you practice more difficult procedures on beater project car when you have money to drop and not do it with your main vehicle.
@jmaxim80
@jmaxim80 8 ай бұрын
Couldn't agree more
@mindbender3379
@mindbender3379 8 ай бұрын
It could be fun to watch them build his motor so he can learn the process in doing it right... invaluable teaching moment in life...
@Aerzon1v1
@Aerzon1v1 8 ай бұрын
​@@Mayamax3You expand your limitations by diving in and tackling new projects, sometimes that results in a failure. It is however a pretty bad idea to practice and have your failures on valuable vehicles/engines. Play around with beaters for sure, not the daily.
@peterolesen2479
@peterolesen2479 6 ай бұрын
Just listen to the curtesy and politeness in that call coming from Dave.. " thank you for taking my call" and " I appreciate your business".... man, not only engine builders can learn a lot from Dave, but everybody, simple politeness and kindness, such a pleasure listening to Daves interaction with his costumes..
@RonRussell-sj1zf
@RonRussell-sj1zf 8 ай бұрын
I worked for Cummins Illinois Engine Sales/Chicago for several years starting in the '70's and they were a superb engine rebuild shop for Cummins (obviously). We rebuilt EVERYTHING Cummins, ground our own cranks, completely machined blocks, rebuild heads and all engine subassemblies and every engine received a full, several hour dyno test before it left. When Cummins Engine Company started their ReCon program it was based a lot on what was done at our facility. Cummins Illinois is no more, bought out by Cummins Engine in early '90s' and is a mere shadow of what it used to be. So, I'm very familiar with what you guys do Dave, keep up the good work!
@StrongerThanBigfoot
@StrongerThanBigfoot 8 ай бұрын
That's a great story. I work on Cummins everyday on the semis.
@RonRussell-sj1zf
@RonRussell-sj1zf 8 ай бұрын
@@StrongerThanBigfoot Yep, we had about 12-15 bays for trucks too.
@knock904
@knock904 8 ай бұрын
I'm no diesel guy..but that must what old timers were talking about .when they mentioned Cummins Engine. Was very stout / tough Engines..Kool story also I love hearing. About historical times
@RussellBooth1977
@RussellBooth1977 8 ай бұрын
When I did an automotive industrial course at tech 30 years ago which was an introductory course at tech in New South Wales in Australia ,it was a prerequisite course to becoming a diesel fitter or mechanic & you could become a mechanic who services light vehicles as well,one of my teachers was going through with us how backyarders who are like that tend to get dirt in engines when they rebuild them & while they might go alright for a while they end up failing or wearing out prematurely. He was emphasising how important it is for everything to be clean including the bolts because if the threads are dirty on the bolts & inside of the engine block, etc you will not be able to set the proper preload on the bolt & they may come loose. For bolts which are bathed in oil such as the connecting rod cap bolts he suggested doing what the manufacturers tell you to do which was to coat the threads in oil prior to refitting the bolts to get the proper preload of the oil bathed bolts. Even when I repaired power tools it was the same deal, everything had to be clean !
@petesmitt
@petesmitt 8 ай бұрын
@@RussellBooth1977 I had a mechanic do a head gasket job; a few weeks later, the oil light came on driving at freeway speed and the engine became very noisy; I had the vehicle towed to a different mechanic who determined the engine needed a rebuild; he found grit in the oil pump pressure relief valve, which caused the valve to jam, causing complete loss of oil pressure.
@FFDwholesale
@FFDwholesale Ай бұрын
I can really appreciate someone like you Dave, going through it all and even during the final moments of the video saying "I don't want to spend any more of his money until he knows that this is what it's really going to cost". I wish you guys were up here in Chicago, we need more people like you in the world. Thanks again.
@dingalingalong
@dingalingalong Ай бұрын
This is why garages don't like to take work they haven't done. It's a recipe for a complaint (or worse) when things go south.
@User0000000000000004
@User0000000000000004 8 ай бұрын
My LS3 dropped a seat at about 200k miles. It just barely tapped the top of a piston and it happened while I started it up so I immediately shutdown and it didn't do any more damage. Pulled the engine, disassembled it, took it to a shop to be machined and measure the journals, cylinders, etc. Ordered all the appropriate parts for it and had it all sitting in my living room. I'd already had the same shop rebuild the good head and order me a new head to replace the one that dropped the seat. Sitting on over $10k parts and labor and decided "I can take an engine out, put it back in, disassemble it, and while I can put one together, I don't know the decades of knowledge to do it RIGHT." So I went to the builder with everything and said "you've already done the machine work, I ordered everything from GM and sized on the measurements you took. I understand if you don't want to warranty it but bro, one mistake and I'm out DOUBLE the money and there aren't any LS3 engines available anywhere now." They built it for me and it's been perfect ever since. GLAD I made the choice because I knew that I've learned a ton in my life but as I work in IT and meet other IT guys all the time who don't REALLY know what they're doing, I recognized I didn't REALLY know how to put an engine together. You can't replace 30 years of work, muscle memory, the micron-level touch in our fingers. It can only be hard won through doing the work and doing it well. I went as far as I could go and I wasn't afraid to say so.
@0utc4st1985
@0utc4st1985 8 ай бұрын
On the other hand I've had "professionals" screw up even basic stuff like massively overfilling a transmission I had a shop rebuild. Just because someone does it a hundred times doesn't mean they will do the job right if they do sloppy work. Trusting the wrong people, which is part of what went wrong here, is very expensive in automobiles.
@0utc4st1985
@0utc4st1985 8 ай бұрын
@@randmayfield5695 Putting twice the fluid as it's supposed to have, putting an obviously wrong length of TV cable, not paying attention to the spark plug cables when reinstalling it so the fan chops up one of them......yeah, I don't buy your premise. A fish rots from the head down mate. Most shops in my experience just want your money and try to shove it out the door as fast as possible with zero QA.
@cnf6045
@cnf6045 8 ай бұрын
I just left a comment with a similar experience, although yours is probably better articulated, I’ll paste it here. I’m a full time mechanic…I had my own motor go on me in my Cummins, 12V, friend had a 24V motor he was selling, the price was right, bought it, swapped the mechanical fuel pump over (which is a bit of a job, gotta pull the cam and swap the front cover, as well as retime the pump), resealed the 24v, and rolled in bearings…but you better believe before I bought that engine, I did a compression test and stuck a bore cam down every hole I could think of, and when it went back together everything got torqued to spec…and I didn’t touch that oil pump…cause oil pumps are scary. Engines now in my truck running fairly happy, few little issues, but it gets me around and it’s good for laughs(…especially cause I put a rowdy cam in and a big turbo on.) That being said, that 12V is sitting in the garage, and it’s gonna get sent out to the machinist and rebuilt for some serious power. Even though I think I could rebuild it from the crank up, and would probably enjoy doing it, and probably know those engines better than anything else…I’m still gonna pay the machine shop to do the reassembly for me. I don’t wanna have those questions in my head ‘did I torque this, did I do this right’ etc. Even when I can hop on identifix and get every single torque spec and sequence, I would rather pay the professional engine builder to do it.
@COBRO98
@COBRO98 8 ай бұрын
Rebuilt my first small block when I was 14.. it still runs over 20 years later.. you need to have more faith in yourself kid. We were all building engines, transmissions, differentials etc when i was a teen.. Pushrod engines are simple designs that last. Service data tells you how to do any repair on a vehicle these days.
@sl0907
@sl0907 8 ай бұрын
​​​@@0utc4st1985sorry to hear that u've obviously been screwed over by a skid mechanic. Totally understand ur frustration as the mistakes u mentioned are so basic its inexcusable. A novice can probably figure it out with not that much research. The person that did the work shouldn't be in this industry. Fluid capacities and level check procedures can be found online if they just spent the 5-10 min to look it up. Most ignition wires u buy nowadays have the cyl# printed on them so u know exactly where they go. Even if they had no printing all u have to do is take pictures, pull them off one at a time, and Match up the old wire lengths for each cylinder to the new set.
@jeremyfisher347
@jeremyfisher347 Ай бұрын
Idk about anyone else but this dudes one of the smartest honest mechanic/shop owner ive ever seen!!!
@LeroyHeeneyWine
@LeroyHeeneyWine 8 ай бұрын
So much more intriguing than a crime investigation or murder mystery, these episodes are so captivating. Great job! I hope this works out well for the owner (and the next owner).
@Glocktard
@Glocktard 8 ай бұрын
Engine crime drama is what this engine would have turned into.
@DavesAutoCenterCenterville
@DavesAutoCenterCenterville 8 ай бұрын
Quite a great compliment, thank you very much 👍
@kevloos86
@kevloos86 8 ай бұрын
Would be interesting to know what happened to the F250 diesel with the bad fuel system and the angry owner.
@Ziegmont
@Ziegmont Ай бұрын
Dave's continually shows me that a shop can really be on the up & up. I love how you have open communication both with the customer, and your service writer to educate about what's needed and what's got to happen. Like they say, a rising tide lifts all ships. Knowledge without communication can come across as piracy to the consumer, so kudos to Dave.
@roadgeneral
@roadgeneral 8 ай бұрын
I am really impressed with Dave and his way of doing business. His customer skills are spot on. There's no BS going on here, just the hard facts. Kudos to Dave's Auto Center.
@VictorShaver
@VictorShaver 7 ай бұрын
You are perhaps the most ethical repair shops I have ever watched! You are a testament to your integrity and honesty! Kudos!
@ChanceDouble-ho5jp
@ChanceDouble-ho5jp 6 ай бұрын
Very true my friend. Even here in Australia mechanic have lost their morals.
@Zippadeedoodaa-nt8om
@Zippadeedoodaa-nt8om 5 ай бұрын
He's on camera, what do you expect?
@VictorShaver
@VictorShaver 5 ай бұрын
@@Zippadeedoodaa-nt8om What is your reputation??? What if someone claimed you a derogatory term such as a pedo do you think that it would only be that your on camera? Something to think about? 😳
@gimmethecarkeys
@gimmethecarkeys 8 ай бұрын
Prob one of the coolest customers. Very understanding. I love having customers like that, they understand that your being honest and straight forward.
@User0000000000000004
@User0000000000000004 8 ай бұрын
When I dealt with the shop that did work for me, I didn't haggle over price, just paid what they asked and went with what they said I should do. I got the feeling from them that I was very much in the minority. It's a shame.
@dv6195
@dv6195 8 ай бұрын
Hard to find now a days no trust in any industry really
@captaintoyota3171
@captaintoyota3171 8 ай бұрын
​@dv6195 true but when you find the honest tech or tradesman YOU PAY THEM. Im ex ASE tech commercial carpenter. No i dont need ur cheap $$ to do mechanic work. I only do it 4 those who cant afford it/cars value=shop costs too much. But im honest and ill do it RIGHT. So i may be cheaper than shop but u want a toming belt? Maybe pay me 1000$. Cause its still 2,000$ less than a shop
@captaintoyota3171
@captaintoyota3171 8 ай бұрын
​@@User0000000000000004this is correct way. Once u find the honest ppl PAY THEM overpay them. It will help them remember you. I treat everything with 110% effort and to any rules about it no matter how trivial and thats the person u want. Do it RIGHT the 1st time
@roninbushito
@roninbushito 21 күн бұрын
@@captaintoyota3171waste of time
@BLKBRDD
@BLKBRDD 8 ай бұрын
I wish there were more small to medium size business owners like this. The piece of mind it gives you as a customer is worth every cent
@reinforcedpower5406
@reinforcedpower5406 8 ай бұрын
Dave, As a mechanic and engine machinist/ builder since 1988, I applaud your sincerity, integrity, and no compromise values of your shop. When you turn out quality, you can look everyone in the eyes and smile. Kyle Johns
@dodgedemon840
@dodgedemon840 8 ай бұрын
Every shop needs to watch these videos and see how its truly done
@TheStealthbob
@TheStealthbob 8 ай бұрын
As far as the comments to the service writer...I dont mind when someone is firm and direct with me when I miss something, it helps so much to know where you sand with your boss. Constructive correction with respect...beautiful. Man I wanna for for this guy.
@zachc2991
@zachc2991 7 ай бұрын
I cannot get enough of Dave's content. I wish I had known about him when I started my career. I would have packed up and moved out and begged for a job. Learn it from the best from day 1.
@CO4x4Chevy
@CO4x4Chevy 7 ай бұрын
💯 percent. I got my start at a local dealership and the guy I apprenticed under was a bi-polar egomaniac and I found out he did some shady stuff to customer’s cars to drum up more work. I was only making $8/hr (this was in ‘05). I learned a lot, but ultimately I packed up and took a different career path. I enjoy working on cars. Had I had a mentor like Dave, with integrity, patience, wealth of knowledge, and actually investing in his employees,… this industry is hurting for great Techs. Every shop I deal with lately comments on that.
@thimes79
@thimes79 8 ай бұрын
Top notch shop owner and don’t forget top notch technicians. Masters of their craft. Honesty and skill. Two things almost impossible to find in the same building these days.
@sn4rl277
@sn4rl277 7 ай бұрын
This is unreal how you show every step of the troubleshooting process. By far one of the best auto care channels on KZbin. Dave I love how you arched back to the "That's what we are here on earth doing learning from our mistakes". God bless you Dave, in a time where mechanic shops are pulling fast ones on folks, you are here bring the Truth to the mechanic world.
@StrongerThanBigfoot
@StrongerThanBigfoot 8 ай бұрын
I been taking notes from every video to make myself a better mechanic. I love the way this guy questions and explains the why and how behind everything. I also have seen many engines installed and never once did any mechanic do a cleaning first when it got back from the machine shop. This channel will be the reason why every mechanic will up their game.
@brandoncarlin5373
@brandoncarlin5373 4 ай бұрын
I wish I could work for this guy. I know nothing about engines but I feel like I'm learning a lot just watching. The way he explains everything by breaking it down makes it easy to learn.
@aurian18
@aurian18 8 ай бұрын
I rebuilt the C4 and 302 in my 72 F100 2 years ago. I had never done a full rebuild before. I bought books on it, watched KZbin videos, and was extremely meticulous with the job. It's been 2 years and it's still running strong. Going to pull the top end apart and inspect the camshaft, lobes, etc this summer to determine if I have any premature wear before adding a supercharger; it has about 12k miles on it so far so I suspect it is entirely broke in, to include the timing chain slacking some(I advanced it 4 degrees just to compensate for timing chain wear over time). Anyway, I wish everyone luck who rebuilds one themselves. It is a labor of love and a very enjoyable process, but you must take your time and do it correctly the first time. Do not be afraid to pull it apart many times if necessary.
@DavesAutoCenterCenterville
@DavesAutoCenterCenterville 8 ай бұрын
Thanks for the share 👍
@stevesmith8155
@stevesmith8155 8 ай бұрын
ALL of the time I have spent watching Dave's videos has been time well worth it. Enjoyable as well as educational. Key is that Dave is a very moral person/ business-owner as well as a most knowledgeable in this business. A pleasure to watch and learn. Thanks Dave!
@The.Floor.Store.At.Your.Door44
@The.Floor.Store.At.Your.Door44 8 ай бұрын
Rebuilding an enging is very tedious. I have been working on my personal cars since i started driving. In my 40 and took a stab at in after my work van hydrolocked in my driveway. I did not know what was wrong with it until i had the rod on a table all i knew was it ws knocking like hell one day after i started it. It almost went flawless. I had a rod cap het loose and spun a bearing 2 miles from home about 3 month after the build. Was able to just replace it with no other damage. I found this channel during the rebuild and keep watching since. I got to say i want to take apart my trailblazer engine now, and my wifes town and country after i buy her a newer car. Its a fun process and very rewarding when you can clear all the problems and lights all at once and your engine sounds smoother than you ever remembered.
@ericcampbell3418
@ericcampbell3418 5 ай бұрын
Be careful the head bolts on trailblazer engines like to break off into the block
@mjolles1976
@mjolles1976 6 ай бұрын
I love that he is not one of those crusty old impatient types. He is understanding and patient. He takes the time to educate the customer without making them feel stupid. Dave and his crew are as real as it gets.
@Champagne1221
@Champagne1221 8 ай бұрын
I've worked in the automotive industry off and on for over 10 years, and I have to tip my hat to Dave and his team for their grit, integrity, and just all-around passion for the industry. I enjoy the breakdown videos alot. The back and forth with customers can be a bit nuts sometimes, super solid the way dave deals with it. Alot can be learned here.
@mikemichaud5578
@mikemichaud5578 5 ай бұрын
Dave you are the man. Extremely talented in your profession. Love how you don’t hold back.
@williammaxwell3475
@williammaxwell3475 8 ай бұрын
Everyone should strive to be as meticulous and honest as Dave, it makes sense he has one of the most reputable engine shops in the country. I hope to build something this awesome before I kick the bucket
@Got2gofishin
@Got2gofishin 5 ай бұрын
I’ve been watching your videos for a while now Dave. I’m 56 years old and I’ve been in this industry my entire life. I have been a shop owner since 2007. During my 20s I worked in a shop in Phoenix as a heavy line technician and an r&r guy. We had a full machine shop much like yours. The machinist was the best engine builder I’ve ever met. He built a lot of dragster engines for the race car guys along with street cars. I received most of my knowledge from him. It’s rare to find a high quality shop and a really good engine builder nowadays but it’s obvious you are one. I wish our shops were closer together. I have pretty much gotten away from doing engines and transmissions anymore because of the crap that most builders sell.
@AnterianEvo
@AnterianEvo 8 ай бұрын
Appreciate him taking the time to help the guy work on his own rig. Sometimes you just have to take it to a specialist to do what you can't.
@bu3241
@bu3241 5 ай бұрын
What I'm about to say is pretty irrelevant. We just lost a very good friend, and his name was Dave too. He loved anything with an engine ANYTHING. Such a smart and very misunderstood guy. We rebuilt a couple motors together and always worked on cars/trucks together. He was my human google but better! Thank you for posting these videos as it reminds me of our dear friend. I have a gut feeling our friend Dave somehow in his afterlife showed me Daves Auto Center. Life is too short, and life happens so fast. I miss him so much. Thank you for being apart of my life Dave and thank you for leading me to this channel.
@Quadsworth
@Quadsworth 5 ай бұрын
Heartwarming! Rest in peace
@bigchills7194
@bigchills7194 5 ай бұрын
RIP to what sounds like a good dude.
@GeneralSulla
@GeneralSulla 5 ай бұрын
Sorry for your loss Brother. I had a family friend who could recite from memory every single word Edgar Allen Poe ever wrote published or unpublished. He was brilliant. Drank himself to death at age 50 on Poe's day of death. He called it too. Life throws you tribulation and trials.. Blessings Brother.
@thomasclifford6535
@thomasclifford6535 2 ай бұрын
@@GeneralSullaI’ve been in a few PITS & have been cut by a few PENDULUMS!!!
@markahad6583
@markahad6583 8 ай бұрын
Another ‘can of worms’ taken care of by your dedication and honesty, Dave. The biggest takeaway I got was communication, communication, communication! Enough said. Great watching you guys. Cheers!
@localparfait
@localparfait 8 ай бұрын
Dudes a good leader, the guy who comes in an asks the critical questions.
@agoodfellarad
@agoodfellarad 8 ай бұрын
I have a 5.9 cummins that i work on myself. Im not a mechanic and I don't wanna do the job, but I don't have the money to take it to a shop. Thank god for you tube, definitely understand why guys try and do the work themselves.
@sbhcmcc
@sbhcmcc 8 ай бұрын
The problem with most shops is the lack of communication but the way you handle these situations in and of itself is enough for me that God forbid anything happens to my engine, I’ll box her up and send her to you guys all the way from NC
@ar2043
@ar2043 8 ай бұрын
I feel bad for the customer but you know what is great? The fact that we have this technology nowadays where you can email the man shots from your video camera and borescope pictures. It's another great tool to ensure the customer (and technicians too) that everyone involved is being totally honest and honorable. Love this channel. 👍🏼👍🏼👍🏼
@COBRO98
@COBRO98 8 ай бұрын
Mechanics shouldn't have to do that. Do you expect video evidence from your doctor when he tells you that you have cancer, of course not
@ar2043
@ar2043 8 ай бұрын
@@COBRO98 Of course they shouldn't have to, and they don't have to. I'm just saying that it's a nice piece of technology to have that you're able to use if you want. As far as my cancer diagnosis goes: I guess I wouldn't demand video evidence but I would probably review some CAT scans and MRIs with him or her or whatever tests they run. I would certainly be looking at pictures and videos if my surgeon told me that I absolutely needed a new knee or a new hip..... of course I would want to see that. And I bet the doctor wouldn't have an issue showing me. But I wouldn't HAVE to see it necessarily. That's all I'm saying.
@johnrogers2849
@johnrogers2849 8 ай бұрын
I really like the analogy between the surgeon and the engine assembler.
@petesmitt
@petesmitt 8 ай бұрын
At least it's only stuff; doctors and dentists routinely destroy the health of their patients.
@DirectCurrent4u
@DirectCurrent4u 8 ай бұрын
@@petesmitt Theres good and bad ones out there everywhere! You have to be picky and know who you are working with for sure!
@DirectCurrent4u
@DirectCurrent4u 7 ай бұрын
@@dadigitechman 💯Fact!
@petesmitt
@petesmitt 5 ай бұрын
@@DanielGutierrez-zu9fv Tell that to my brother, dead at 46 due to an entirely preventable surgical error, u turnip..
@petesmitt
@petesmitt 4 ай бұрын
@@DanielGutierrez-zu9fv I've forgotten more about medical malpractice after decades of study than you'll ever know..
@geraldvalverde
@geraldvalverde 8 ай бұрын
Its really wholesome to hear the way you talk about your sons. I wish my dad was as proud.
@chrisej5987
@chrisej5987 8 ай бұрын
Absolutely needs a part 2! I. Still waiting to see what is gonna happen with that cracked crank M156 (6.2 AMG Mercedes V8)!
@gregorylyon1004
@gregorylyon1004 6 ай бұрын
That Mercedes is a total loss. LOL. Junk
@sampson9198
@sampson9198 8 ай бұрын
I worked for a flooring company called Unlimited coatings, Dave was nice enough to let us do his entire shop and the showroom which polished. Dave is an amazing mechanic and a super nice gentleman. I appreciate the experience we had at that job.
@dougbourdo2589
@dougbourdo2589 8 ай бұрын
Wow. What a shame. So many guys with the best of intentions end up like this because they simply do not know what they do not know. I used to be in the tractor business and learned how t rebuild gas & diesel engines. Never had a return due to this kind of issue. That was long ago when I was just a young buck. These days I watch Dave's expertise here and will likely end up having his crew rebuild my current engine when the time comes. God Bless all of you good folks.
@jimjernigan8694
@jimjernigan8694 8 ай бұрын
Sir you are a surgeon- for engines. Extremely impressive watching how you guys conduct business! Great work!!
@MANNETT
@MANNETT 8 ай бұрын
Hi Dave many thanks for your fascinating videos of what you do in your shop. It is clear that you and your family have a real passion for what you do. It is also fantastic to see how you implement your Christian principles within your business with both the customer and your employees. You really do care about what you do. It was lovely to see you giving back to the next generation of young mechanics as they toured your shop and listened to your advice. May God richly bless you in days to come as you continue to serve him in your daily life. Watching in Northern Ireland.
@vancave3539
@vancave3539 Ай бұрын
Dave I am very impressed by the way you treat people in your daily business dealings. You are always positive and encouraging to your customers and your employees. What a blessing you are. God bless you and your family😂
@rosssmith9941
@rosssmith9941 8 ай бұрын
This needs to be a TV show
@victorborges9523
@victorborges9523 3 ай бұрын
No. KZbin is more powerful.
@jamesalexander4805
@jamesalexander4805 8 ай бұрын
I love Dave, he reminds me of a true old school New Englander. I'm from Massachusetts and my family has had a shop going in Sudbury since 1952, my dad started it and now after two generations his grandson is running it. I was just out there in Idaho visiting my grandkids in Sun Valley where my son lives. I drove by Dave's place on I15 on our way to visit friends in SLC, but couldn't stop in and visit because of our tight schedule. Next time I'm out there I just wanna shake your hand. Your a good example of what a fair, honest businessman is. My Dads motto at our shop was "test work, not guess work" and "do it right". Lastly , I've learned a lot about diesels and procedure by watching your videos.
@michaelmartinez1345
@michaelmartinez1345 8 ай бұрын
Excellent video!!! This engine was actually saved from much worse damage.. It is a good thing the client asked for A Simulated test, before running this vehicle... Good job guys!!!
@DavesAutoCenterCenterville
@DavesAutoCenterCenterville 8 ай бұрын
Thank you very much!
@randallhoover2410
@randallhoover2410 Ай бұрын
Dave doesn’t sugarcoat anything! He’s straight to the point
@charliecliche6155
@charliecliche6155 8 ай бұрын
I'm not a mechanic so I can't believe I watched the whole thing!! An excellent video. " You da man Dave ".
@kjbathe
@kjbathe 8 ай бұрын
"I don't want to spend any more of his money." That one line explains your success.
@philipmichaud9529
@philipmichaud9529 8 ай бұрын
Dave, you have the best darn videos on YT. PERIOD!!!!!
@chrisferrell1037
@chrisferrell1037 6 ай бұрын
Mad respect for being straight up. Everyone hates hearing its gonna cost more money, but being straight up is the best way to be.
@upupandaway5646
@upupandaway5646 8 ай бұрын
This is why you pay a professional tradesman to build it .experience is priceless. Dave's the best 😊 amazing tradesmen 😊.
@DavesAutoCenterCenterville
@DavesAutoCenterCenterville 8 ай бұрын
Thanks 👍
@cs7285
@cs7285 6 ай бұрын
This is better than tv. Should have his own YT show. Some of the best content out there.
@sirmingusdewiv8325
@sirmingusdewiv8325 8 ай бұрын
Way back in college (early 90's) my grandfather and I "rebuild" my 2.2 engine in my Dodge Aries K. Blown piston. Got it running, messed up the vacuum tubes, and it burnt a quart of oil every 2 weeks. Lesson learned.
@Anonymous-it5jw
@Anonymous-it5jw 7 күн бұрын
People want the truth about needed repairs, whether good or bad, but many to know what the worst possible news might be before you start on the job. This is exactly what you did, and made multiple calls to keep the customer informed. For some customers any necessary work which is less than an expensive estimate is good news. Thanks for the great work you and your sons and employees do. It is refreshing to see the breadth of your professional knowledge and your ability to accurately convey your findings to your customers.
@refusemech
@refusemech 8 ай бұрын
It's refreshing to see an honest shop owner that provides good advice at a time where money is tight. If the gentleman was wise he would keep the truck rather than sell it. Todays trucks are pretty much junk being bogged down with emissions and technology. Hopefully you can convince him otherwise. Older is simpler and more dependable.
@somedude4805
@somedude4805 8 ай бұрын
It’s good that you’re doing videos like this, because it shows people how involved and technical the job really is. It’s not just pushing buttons to fix cars, and the customer rarely sees how much physical effort and technical knowledge is required for this kind of work.
@dirtyal6567
@dirtyal6567 5 ай бұрын
Anyone who lives within distance to get service done by this dude should count their blessings. A real master of the trade
@VictorShaver
@VictorShaver 3 ай бұрын
I am so impressed with your ethics along with the professionalism of your Sons that if I had an engine with the ability to send it your way I definitely would. It’s hard to find people like you in this industry. Kudos!!!
@pikapika5301
@pikapika5301 8 ай бұрын
We all make mistakes. When I was 18 I replaced a blown head gasket with out checking if the head needed resurfacing/skimming to save money. Needless to say it went again very quickly. Lesson learned for life.
@billthompson6182
@billthompson6182 4 ай бұрын
As a teenager broke many a valve on double overhead cams. We didn’t have the Web.
@cjespers
@cjespers 8 ай бұрын
As an Ase certified tech, mechanic for 5 decades, this is the guy you want working on your stuff. Well done, my friend.
@slimdugger99
@slimdugger99 8 ай бұрын
Problems with projects like this one has, comes from too many different mechanics having their hands on the build. Something always doesn’t get done or fixed or checked because of poor communication and just too many points of possible issues if the correct procedures aren’t followed. That’s why it’s essential to find a shop with the equipment and with mechanics experienced in repairing the exact problem that you have and having a single pair of hands and eyes in charge of the job.
@tii2015
@tii2015 2 ай бұрын
Straight forward & no BS... Love your channel Dave!
@bryanshaw521
@bryanshaw521 8 ай бұрын
David, your doing the right thing. You should tell us how much labor on each job is and how much each technician gets paid. Doing the job.
@burks1993
@burks1993 8 ай бұрын
the way he helped matt was extremely professional and respectable.
@wilyg4307
@wilyg4307 8 ай бұрын
Wouldn't it be a wonderful world if everyone ran a shop like dave..
@matthewfournier6478
@matthewfournier6478 6 ай бұрын
I respect this young kid for trying. He just needed some one to show and teach him. Most people wouldn’t even attempt that repair.
@MrBigtom06
@MrBigtom06 8 ай бұрын
This is the best engine channel on you tube
@juststuff8128
@juststuff8128 6 ай бұрын
Man this guy is the real deal he's honestly honest and food for biz. If I ever get something built it'll be this guy
@RussellBooth1977
@RussellBooth1977 8 ай бұрын
When I studied an introductory automotive industrial course at tech 30 years ago in New South Wales in Australia which was a prerequisite to becoming a diesel fitter or a diesel mechanic or you could become an automotive technician who services & repairs light vehicles one of my teachers was talking about how a lot of backyard engine builders worked in dirt meaning that once the engine is rebuilt,it might go alright for s while but it will likely wear out or fail prematurely. He was talking about how the bolts & the threads in the engine block & cylinder head, etc should be cleaned & free of dirt, maybe blow the threads out & also clean them with a thread tap or a die nut because dirt will cause the bolts to come loose or the specified torque figure cannot be achieved when torquing up the bolts if they're dirty. Also that generally a manufacturer will instruct you to coat bolt threads such as bearing cap bolts with oil prior to installing & torquing up the bolts since they're oil bathed. I know that I have rebuilt a few engines or I have done some major work on them & none of them have failed even when I have had half of the engine stripped down & outside in the backyard. It's the same as when I repaired power tools as an apprentice, everything had to be cleaned in a parts washer,all the old grease had to be removed from a gearbox of a grinder or a jackhammer because if any metal shavings or bits if needle roller bearing was left in the gearbox & piston assembly some of that grease would work itself down into the piston assembly & tear up the new piston seals
@Higherselffitness
@Higherselffitness Ай бұрын
Such a nice guy, I wish every mechanic was like himS honest and knowledgeable
@thatslowcarchannel1481
@thatslowcarchannel1481 8 ай бұрын
Definitely need a part 2 for this video for sure!
@marcussaiber6021
@marcussaiber6021 7 ай бұрын
Must say gents. You sharing your mechanical acumen and expertise go a very long way to preserving this science . I would be an honor for anyone to learn and study under your guidance. Your content is always inspiring. Sincerely MFS
@schamberlain1
@schamberlain1 8 ай бұрын
This is my favorite yt channel. I wish I could work with Dave. I'm sure the learning would be constant. My first job out of high school was rebuilding cylinder heads out of machine shop.
@yachticus
@yachticus 8 ай бұрын
Dave - hats off to you mate (writing from Aus) I have been that young bloke on the other end of the phone - atypically they are really keen - and keen to learn. Who knows, he may get good value on being present when your guys strip down his engine down- and a couple of days later when you put it back together.(aside- he'll probably even keep the truck) Everything can be a teaching moment - and your old enough and community minded enough to recognise that this could be a good teaching moment for him - as well as us your viewers. as to your video here - I think you "tap danced" the line between - take your junk and shove (basically a pain to embroil yourself in what is a train wreck going to happen) and offering to help the guy. In our business the goal is always to put the client in a better position - and in that - you have to acknowledge you win some - and you breakeven on some - and some you lose. Your transparency here is laudable.+ you have a great bunch of guys - making you look good.
@martinminar1949
@martinminar1949 8 ай бұрын
I don't know much about engines, but I love to watch those videos.
@naterade32
@naterade32 3 ай бұрын
so much of this is way over my head as a DIY guy but it's super cool to learn these intricate details about engines and engine repair
@emmanuelhud1
@emmanuelhud1 8 ай бұрын
Uk 🇬🇧 england comment I love watching this channel. When it moves to discovery, I will definitely be getting the membership to continue watching. Keep up the good work guys it's really entertaining 😊
@DavesAutoCenterCenterville
@DavesAutoCenterCenterville 8 ай бұрын
Awesome! Thank you!
@jaredripka7633
@jaredripka7633 5 ай бұрын
What an impressive operation! The repair is sometimes the easy part. These are hard conversations to have with customers. Hats off to you and your team Dave!
@Mac-i3m
@Mac-i3m 8 ай бұрын
Daves got that reality tv vibe without the reality tv script.
@lashlarue7924
@lashlarue7924 8 ай бұрын
Discovery just picked him up though he's the real deal!
@DrBo1
@DrBo1 8 ай бұрын
he is ever so fortunate to have you on the job!!
@jSamm1203
@jSamm1203 8 ай бұрын
I wish all engine builders were honest as you
@0utc4st1985
@0utc4st1985 8 ай бұрын
Besides not getting it cleaned the main issue just wasnt following the directions exactly, the loose bolts most likely werent torqued to the right spec, same with the oil pump. Its good to learn how to do these things the right way.
@newfie-dean5803
@newfie-dean5803 8 ай бұрын
So many people pay no attention to torque values. Lots of mechanics will slap your wheels back on and go to town torquing your wheel lugs with an impact. Meanwhile they make them so tight that it can distort your rotor causing uneven brake pad wear, put additional stress on wheel bearings causing them to fail sooner, etc. There’s a reason why OEMs specify specific torque values on various bolted components.
@tonyfremont
@tonyfremont Ай бұрын
How about all that water though? This is a really bad situation. The owner wanted to assemble his engine himself, but he didn't read what he needed to read. Rule #1, no room for dirt in an engine. I've never assembled a bottom end, but I've done a few valve jobs, intakes, cams etc. How to rebuild a small block Chevy is a great book, so is the how to hotrod a SBC book. David Vizard knows his stuff. I replaced a cam, and had the whole thing assembled timed and ready to fire while I was "speed learning". Learned enough to know I needed to swap the cam to something that would work for me. The first one would have sounded cool, but it would have sucked badly as a daily driver.
@clintjohnson4947
@clintjohnson4947 7 ай бұрын
It doesn’t take kno longer to do it right the first time then it does the wrong time. You are the man that does it right the first time.
@badasssamurai4954
@badasssamurai4954 8 ай бұрын
I've seen a few shorts of Dave's channel.... This is the first full video I have watched.... Dave is very matter of fact and borderline rude! But, he gets to be like that... He is the MAN when it comes to engine's and I love how he doesn't sugar coat anything! Really like this guy!!!
@harveyspecter1653
@harveyspecter1653 8 ай бұрын
You can immediately tell you guys have tons of experience and don't do a half-ass job. Great videos guys!
@Fapsahoyx
@Fapsahoyx 8 ай бұрын
Dave looks just like a surgeon or medical doctor so his analogies and comparison to car mechanics is perfect 🤣
@DavesAutoCenterCenterville
@DavesAutoCenterCenterville 8 ай бұрын
Thanks for that😂. And I do find that comparing it to the medical world helps to make sense of it to the customer.👍
@Bubba-wx7lp
@Bubba-wx7lp 8 ай бұрын
All surgeons are mechanics. Dave sounds like my surgeon, very thorough. Old mechanic here,I always learn things all the time,this video no exception.
@Fapsahoyx
@Fapsahoyx 8 ай бұрын
@Bubba-wx7lp In a sense they are but not literally. Totally different professions. One works on the human body the other vehicles.
@aquasaltyfishing4933
@aquasaltyfishing4933 5 ай бұрын
@@Fapsahoyx It is only a analogy, not literally...be nice
@Fapsahoyx
@Fapsahoyx 5 ай бұрын
@aquasaltyfishing4933 what are you my mother? shut your mouth dont tell me what to do.
@bobbypaluga4346
@bobbypaluga4346 4 ай бұрын
Wow, what an incredible mess, I’ve done a bunch of work on VW beetle engines I’ve had but it takes me likely 4 times as long as a well trained mechanic to complete a job but I’m meticulous about completing every step. I can’t believe this guy was as sloppy as he apparently was leaving all the dirt and crap inside the engine and leaving bolts loose. Todays engines are too complicated for me I’ve got a RAV4 and a Infiniti sedan I wouldn’t try to repair, I wish Dave’s shop was here in Phoenix I have a feeling that when they go off warranty I’ll be making that drive to Utah to have any major work done. These guys are honest and transparent.
@johnparsons4859
@johnparsons4859 8 ай бұрын
When I started as a technician back in the early 80’s, the man who taught me everything I know always said, “Do it right the first time”. When you cut corners it always comes back to bite you.
@daniels.2720
@daniels.2720 8 ай бұрын
I learned: it's ok to not 'know' > go gather knowledge & find out - the right way.
@ThomasBrock74
@ThomasBrock74 5 ай бұрын
I absolutely love your videos, your professionalism and expertise is second to none that I've seen on KZbin. You are a truly great mechanic and that is so rare nowadays. I just really enjoy watching what you do on here and thank you so much for making these videos for me to watch...
5.9 Cummins Overhaul  Upgrades
17:36
Dave's Auto Center
Рет қаралды 259 М.
5.9 L Dodge Cummins tear down inspection reveals poor machining
11:17
Dave's Auto Center
Рет қаралды 188 М.
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 36 МЛН
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 61 МЛН
Broken car and Customer service experience
19:17
Dave's Auto Center
Рет қаралды 303 М.
How synthetic motor oil is made | Part 1 of 4
24:59
Banks Power
Рет қаралды 2,3 МЛН
Customer States Jiffy Lube refused to change my Oil - Sludge Factory Kia Forte
24:54
2005 Duramax, loose bolts and other components destroy an engine
20:52
Dave's Auto Center
Рет қаралды 466 М.
Instant Justice! (Dealership Ripped off Customer) Never Serviced!
36:35
Rainman Ray's Repairs
Рет қаралды 1,8 МЛН
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 36 МЛН