70's Fender Jazz Bass Gets a Restoration Logo

70's Fender Jazz Bass Gets a Restoration Logo
DWOFS Sticker
www.paypal.me/...
Penny Black CD
www.paypal.me/...
Become a Patron
/ davey4557
Facebook Group HERE
/ 709188682862895
Twitter Me
/ davey4557

[@mikedonnellan4937]

"I'll do nothing before I do shit work." Words to live by. Thanks Dave.

[@dangardace9]

Long time watcher. I seldom comment but I really want to express how I enjoy watching your videos. Seriously nothing brings me more joy than watching your vids. Your a real KZbin gem! Cheers Dave ! Keep up the great work!

[@Me4-gc8qs]

I hope Dave got paid well for this job as he went above and beyond the call of duty! Knighthood required for Dave!

[@JA679e55]

Always happy to see another upload! Thanks for all you do, Dave!

[@TheWGLOVER]

The headstock edges are probably nitro overspray. I am so glad you decided to replace the logo. Much tidier.

[@h.l.westlake2587]

Sup Dave...i actually got me start in the paint and art world bizz 40 years ago by painting the Fender logo in paint for Ric Ocasek (the Cars) on his headstock cause he didn't like the sticker. Some folks just like the added touch. Rock on and nice work with a smile you do. H.L.

[@mccypr]

Looking much better! Thanks!

[@thowarth1977]

Fantastic new theme opener Dave! Dig it

[@cubbyjo]

My first guitar was a 70s Mustang that we found at a flea market. It had black lacquer over that polyester dip coat. The lacquer was badly cracked and wiped off with acetone but the acetone didn’t affect the polyester at all. The sealer was so thick that you could see light between your finger and the wood that seemed to be about 2mm.

[@smasica]

I had a couple old 20s & 30s radios with the big wood cabinets the size of steamer trunks that I wanted to clean up. Murphy's Oil Soap is the thing to use. Comes in a liquid concentrate and already mixed. Works great and doesn't hurt varnish or shellac. Smells good, too.

[@Daddy53751]

I love Dave! Hes the twin brother of the guy who used to Dyno tune my race bikes. Super crabby, with zero tolerance for idiocy, but nobody better at what he did!

[@matthewf1979]

I love that we can get Fender water slide decals. I have replaced a few myself. I’ve done a few “Les Paul Model” decals, even though they’re screen printed at the factory . They look great after a few coats of nitro. Can’t even tell a repair was done. That being said, I don’t like the thought of scammers getting one over on an uneducated guitar buyer. It happens. Great jorb there Davie!

[@ladeseddy5994]

That is a damn fine job Dave. Nice.

[@mattspinny1048]

Dave helping us all through covid 19 times. We like that kind hahaha!

[@colinmackay4681]

Wow Dave, craftsmanship, I always wanted to see that done with the logo.

[@RaxFx]

my wife hears your voice and says "Fixing guitars again? - when will you finish the started projects?"

[@peterwelsh1932]

Is that your wife? I thought it was more of the voices inside my head

[@RaxFx]

@@peterwelsh1932 probably both... :)

[@RaxFx]

@@peterwelsh1932 btw: finished one project today - a partscaster out of scraps... ended planting the fake Strat neck in the yard (hope to breed Squier Minis) and the metal parts will be recycled metal. Basswood body I gave away,

[@peterwelsh1932]

RaxFx such a pakRat hoarder here (because of childhood poverty!) my first reaction was! “Dude! In the yard! I coulda gave you $5 or $6 for that! Find a homeless kid, craigs free list! “ but actually= I’ve found entire working guitars on Craigslist for $25 dollars. Actually, half my guitars were just junk people gave me. Back in the 80s though, you’d have had to find someone that needed it. (I’m thinking of ordering my bass player a purple maple tiger Chickenbacher bass/ 12string off AliExpresss just because we can’t afford a real one and they’re only like ? $300-$400 bucks? We really live in an age of excess

[@RaxFx]

@@peterwelsh1932 I don't dispose of usable parts - but if a neck is warped it won't make anybody happy... bad parts are bad parts, not doing anybody a favour by passing on real trash...

[@MickyDee67]

Gooched: The word that means absolutely anything you like. From finding a fly in your soup to dropping a $50 K guitar into a pool full of piranha. love it. Dave you gotta be the best fixer in the business buddy.

[@MrMisterock]

New sticker and a totally a new tone for that bass guitar.

[@samlelowitch]

This video is a bit unusual and quite fascinating! Thanks for doing this, Dave!

[@ShannonFerguson]

Great work! Looks good.

[@Ben_Mdws]

Really interesting to see all the processes you went through there - cheers Dave.

[@randyatwood621]

awesome dave looks good !!!!

[@BrooksysBassCorner]

Fab video, learn so much from your videos. Cheers Dave, keep up the good work!

[@deanlong9614]

THANKS DAVE , YOUR A GREAT MAN THAT SHARES AND CARES ! (IT'S ALL IN THE TRUSS ROD ) . AND YOU KNOW..THE THING !

[@orcaflotta7867]

Make that "you're" and please, stop shouting, and you really might be onto something here.

[@greatreset3]

Vinegar cleans butt smoke! 🎶🎸

[@palidiciovermingagurainia1760]

Something new...to learn from Dave’s fun world

[@spiral3565]

my favorite topic ... Fender Jazz Bass 💀👌🏼

[@julianodecastro4159]

everything is wromg in your work, Jesus I. ever ler. my bass with you....

[@clinchleatherwood1012]

I'm here for the shit bombs. Great work brother!

[@johnbroussard7523]

Cool intro, Dave

[@BGreat2]

Thanks for the information! You rock Dave!

[@christianquessada2007]

Hello Dave i like your channel and your fun Stuff , fan from France 🤘🏻👏

[@bobrobinson2587]

I love the smell of lacquer in the morning !

[@tedblumstein6772]

Thanks for the fun stuff!

[@rocketpoolpki]

hahaha..."a poop stain in your shorts".."turd brown" those jems will keep me going all day...A real pro job Dave, well done fella...the most bizzarre clean up I have ever done was beef blood that had dripped onto a very expensive vinyl record, after going through all the usual suspects with solvents, soaps and water...I ended up eating it away with organic bio yoghurt.

[@Jah_Rastafari_ORIG]

@david perkins Feces Fuchsia...

[@peterwelsh1932]

Don’t fill yer head with that $h!+ ! Just laugh, flush, and get moving!

[@rocketpoolpki]

@@Jah_Rastafari_ORIG haha..I'll take that baby browner to work with me tomorrow...

[@rocketpoolpki]

@@peterwelsh1932 hahaha...

[@Me4-gc8qs]

Ewww i'd hate to do Dave's washing if his poop stains look like that!

[@Steven_SK]

Why O why did you say rock hard? My wife heard that and ordered a few bottles leaving me with very high anxiety and afraid to go to sleep! Thanks Dave!! Great job though. That looked tricky. **note to self** Always earphones!!

[@williamcampbell7387]

"A Clockwork Orange"! "I've got a pain in me Gulliver."

[@grantkoeller8911]

GOOCH!!!!!

[@davidmc107]

weren't some of your video's from years back refinish films that you did behind a plastic screen using an airbrush? I ask because I was looking for them for tips on how to do mine on a 3 P-90 guitar headstock a few months back. I see now that I'm going to have to do more coats to make it nice, thick, and shiny like you mentioned. 23:01 Liked & shared 8-|

[@Jpw824]

Will we see the bass getting set up and put back together?

[@terrynorton3182]

“A poop stain in your shorts”. LOL.

[@glennhynes5263]

Leonardo da stinky was an excellent painter Dave. How dare you. Haha

[@garystearns2066]

Dave simple green cleaner works great to remove crud but not logos on most stuff, used it for years.

[@bassclefconnoisseur]

Jazz bass baby

[@edwinandrews8497]

Hey! New intro music? Nice!

[@gavinvalentino1313]

Did you consider the logo complete after another 3 coats, or did you sand it to level it off and then respray more coats?

[@wademiyataki9221]

Smoke on the Jazz Bass, some poop stains on the headstock.✌️

[@peterwelsh1932]

“🎶smoooooke on the / Jazz bass / 🎶poop smeared on the head stock/ 🎶🎶🎶🎶🎶🎶🎶🎶

[@rasmillion]

Took the finish off with a flapper disk on an angle grinder looks like

[@WillyMcCoy50]

"Alcohol is the winner" grabs the Ronsinol .... "Alcohol is the winner" grabs the Goo-Gone ..... "Alcohol's the winner" reminisces on Easy-Off Oven Fuckin Cleaner. Quit smokin pot bruh

[@Idontlikethisever]

The guy is hilarious

[@mustangj0hn]

Dave, if you ever need to do this again, maybe consider using an Automotive "Caramel" wheel. Basically a rubber wheel that body shops use to remove decals on car bodies, it smells like Caramel!!

[@seamanjive]

"The plumber he said/never flush a tampoon/This great information cost me half a weeks pay/and the toilet blew up later on the next day..." (Zappa, F)

[@daviddesmond2143]

I'm also putting on a Fender headstock decal that I am putting on. It looks like there was another decal on it bur somebody scraped it of. Looks like it once was a"uire" decal. Dawn dish soap and water clean that decal right up

[@EarlofBaltimore]

Great bolshy yarblockos!

[@Me4-gc8qs]

Jumping ship? To where or which ship?

[@JobyP]

Original Formula 409 damn near melts smoke off.

[@goodun2974]

Joby, 409 is truly harsh stuff. My go-to cleaner for smoke residue is OxyClean crystals dissolved in warm water, with a little bit of dish soap added. I don't know how safe it is for an unpainted wood surface, but it's excellent for cleaning my deck planking and (stained) cedar siding. Most wood cleaners for decks and siding are just overpriced chlorine laundry bleach.

[@sliccricc1654]

I think Fender logos from the 70s are the best looking ones to me

[@Metalcop5150]

Back in the 70's Fender used a different finish than they had in the 50's and 60's. An unfortunate side effect was that it reacted badly with the headstock decals, when it was applied over them. (sort of what you stated in the video) So they continued to use the new, durable poly finish on the rest of the guitar and used the old lacquer to the headstocks so they could apply a decal, then clear over it. I have a late 70's strat that has this same different aged finishes effect.

[@jamesburba1995]

Looks just like "polishing a turd" !

[@larryburwell8550]

i learn on all these videos and thank you dave for the education. that said, on a 70s guitar, doesnt this refinish and redecal ruin the value? all these people that like originality this just seems it would kill it. course i know its a jazz base not a P bass

[@daviddesmond2143]

Goo Gone removes decals nicely

[@azbababooey]

What’s going on with the Solo build? We haven’t had an update in a while.

[@azbababooey]

Dave's World of Fun Stuff I don’t want you to hurry, I want to watch you build it!

[@dantararocks8161]

"Any job large or small do it right or not at all."

[@scottbogfoot]

Yeah, in this case especially, the logo don't matter. The paint being gone and all. As long as the correct logo replacement is used and application matches that of the original. Just like replacing the badges on a restro car, you don't want to, original is always best but as long as it's the right part and right fit and is not being passed off as something it isn't then it's ok.

[@julianodecastro4159]

you use American logo or UK logo?

[@donaldholman9070]

I think someone was spanked for pooping his diaper!

[@julianodecastro4159]

ease Sr. you a not luthier donchya?

[@MickyDee67]

Hey Dave, I'm still laughing my ass off because my wife just came down stairs from the kitchen which is full of smoke from her burning the grilled sausages and she says "that fucking Dave has been here and we've been gooched". Previously she has watch one of your vids and asked " what does gooched mean?" I told her anything she liked it to mean where there's been a major screw up. See what you have started now.

[@miremaker]

Question: When you get this type of work, where there is damage/tooling/aging from either prior owners/manufacturers/repairmen, do you ever need to ask the owner if they want to keep that look left from its history? I could imagine someone wanting that completely gone, or also leaving it there. Some of these vids over the years feel like art restoration, how/when do you/they decide what is left untouched?

[@garytucker18]

You look and sound to young to have remembered the day Jimi passed

[@er5406]

A Clockwork Orange reference droog.

[@abscomm]

Ammonia is good for getting rid of nicotine but I don't know if it would totally burn through everything!

[@peterwelsh1932]

Gluboost going on shopping list. Had to scrape off my fingerprint after touching up a chipped nut on my Parker fly with Gorilla Glue Gel

[@peterwelsh1932]

Make sure you remember all your passwords before thou mess with all these glues etc. this guy is a master and makes it look smooth and easy. Your iPod will probably not be scanning your thumb after a project like this 😹🙈☘️🏴󠁧󠁢󠁷󠁬󠁳󠁿🐊🎭🎶🎶🎶

[@donaldholman9070]

A scatological brain!

[@n.angelo3338]

KZbin has literally unsubscribed me from your channel Dave

[@tacob69]

Is it me or is this channel twice as loud as any other channel?When I listen this late I put in headphones since everyone is sleeping and its so quiet and it blows my ears and scares the s@@$ out of me every time.HaHa

[@TheNeonRabbit]

If you have any yarbles...

[@Me4-gc8qs]

Why is it so...that my 2 favourite youtube channels are bass players named Dave?(When i'm a guitarist haha) kzbin.info/door/gFvT6pUq9HLOvKBYERzXSQ

[@joeroganjosh9333]

Well my toilet went crazy yesterday afternoon The plumber, he said, “never flush a tampooon........” FZ

[@ObraBass]

I paid my luthier to make my Fender look pooped :)

[@peterwelsh1932]

“All links in the description ?!?”...” NO WORRIES! I have Googles and inter-tubes access THX-P

[@IsmailsGuitarWorld]

What'd up a piece of paper

[@pauldavis6356]

Dave, Ronson lighter fluid? Easy-Off oven cleaner? Talk about product placement. Are you going "commercial" on us now? Say it ain't so.

[@strat0871]

Don't use alcohol for this, but toothpaste with cotton.

[@Fissi0nChips]

I wonder if Goo Gone would work on that. It's well known that Goo is just short for Gooch. EDIT: Heh. You tried it like 1 minute into the video after I posted this. :)

[@Me4-gc8qs]

hahha so when someone shoots their goo that's a gooch? lol

[@aurthorthing7403]

Would turpentine or artificial turpentine kill the lacquer?

[@Meddled]

Fender sealed headstock decals with nitro even after they moved to poly. At a guess they used low quality nitro over time.

[@stevesmith6554]

Whats with the comment Jumping Ship? More please

[@dontderockmeriz4546]

Peroxide or white vinegar

[@dommadonia9207]

Removing the finish on your headstock with a angle grinder??? I don't think I could implement that!

[@julianodecastro4159]

Man fingers no man

[@nicholasmanupella3475]

I did that job before....alcohol ...wet sand...1 coat lacquer...logo....1 lacquer......2 tinted lacquer.......wet sand...1 more tinted lacquer......buff...install hardware..... A true PAIL IN THE ASS JOB...

[@donaldholman9070]

Try a bottle of rye.

[@ooinvsaoo]

they used a power sander. ask me how i know...

[@mcbrodz1663]

How do you know?

[@grantkoeller8911]

just paint the headstock black

[@spilbee]

4:00 tobacco burst

[@craigkaschan4822]

When Fender used to have real wood underneath the finish. Not scrap wood of today

[@jimbucket2996]

I usually give it the sniff test to see where I've been and haven't been... Dammit, my dog hacked my account again!

[@josephsmith8673]

Sandpaper.

[@cskeise]

💙👊😎